Urg req: Migration of data from 1 category to another - Error with 5 files

Gurus,
I am trying to migrate the data from one content category to another and it woks just fine with the standard sap report:DMS_RELOCATE_CONTENT.
We moved all the documents except 5 files, when we use the report for the DIR's the content server shuts down automatically.
I tried to read the file from SAP (CV03N) and the same thing happens. Can anyone pls suggest any solution for the issue. If we can atleast read the file we can check it into other content category manually but the challange here is to know what is causing the content server to be down.
Appreciate your suggestion ! !
//Madhav.

Hi,
could it be that you have also raised a SAP support message on this issue? Because I remember this kind of scenario and I forwarded a support message to the Content Server experts some days ago. At the moment the Content Server development team is analysing the issue.
So if this is you message I would kindly ask you to wait for the reply of the development expert. Otherwise please tell me so I can update you with the findings too.
Best regards,
Christoph Hopf

Similar Messages

  • Help with migrating user data from one account to another

    I am on a G5 with 10.4.11. I installed FCP studio 6 and everything works fine except compressor. I have had only one user account on this mac (i will call it account 1). I was told to create another account (account 2), log on and see if compressor works. It does. Basically there are files missing on account 1 and compressor won't run. I have installed 3 times and no change.
    Anyway I was told to migrate all my user data from account 1 to account 2. I have been looking at threads and want to make sure I am doing the right thing. I found a way to close. Please see if this works. IT may be from the tiger forum:
    pick a short user name for your new account. then run the following terminal commands
    sudo mkdir /users/newshortname
    sudo ditto ~ /users/newshortname
    You'll have to enter your admin password (which you won't see) after the first command. that's normal. This will copy your current home directory to /users/newshortname. Then go to system preferences->accounts and create a new account with the short name newshortname. You'll get a popup saying that a home directory by that name already exists and asking if you want to use it. say yes.
    Anyway, I would like to migrate everything from account 1 to 2 and have all preferences...everything. I would also like to be able to delete the old account...account 1 and rename account 2. Since this is a home MAC, I really don't need it PW protected. I would like this MAC to just use my new account 2 at start up.
    Please ask me any questions. This is my editing MAC, and I can't get around inside the OS. I know FCP like the back of my hand, but don't want to screw up this computer.
    Thanks in advance.
    Message was edited by: Nelson May

    Yeah, you should be able to move most of it by changing permissions.
    Network settings could be any/all of these though for instance...
    /Users/YourUserName/Library/Preferences/ByHost/com.apple.networkConnect.<12 digit number>.plist
    /Users/YourUserName/Library/Preferences/com.apple.internetconnect.plist
    /Library/Preferences/SystemConfiguration/preferences.plist
    /Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
    /Library/Preferences/SystemConfiguration/com.apple.airport.preferences.plist
    /Library/Preferences/com.apple.sharing.firewall.plist
    /Library/Preferences/SystemConfiguration/NetworkInterfaces.plist
    /Library/Preferences/com.apple.networkConfig.plist
    /Library/Preferences/SystemConfiguration/com.apple.nat.plist
    /Library/Preferences/com.apple.print.FaxPrefs.plist
    As well as the old Keychain & cookies from your Browser.

  • How can I migrate my data from one user to another (to eliminate a previous owner's shortname?)

    I purchased a Macbook Pro second hand a couple of years ago and whilst I immediately changed my user name, didn't realise that the previous owner's short name still exists (I was a bit of a Mac virgin at the time!). I now have tonnes of documents, applications, settings, bookmarks, etc. which are assigned against the previous owner.
    I've now bought myself an iMac and before I migrate from the older machine to the new iMac, I wish to remove all trace of the previous macbook pro owner.
    In researching how to change the shortname user, I've tried virtually everything and everytime have to resort to time machine to restore my settings, desktop, etc. I simply cannot get this to work. Even what seems quite a comprehensive article and procedure didn't work i.e. "full monty" section of the following: http://www.macworld.com/article/1132693/changeshortusername.html
    Having failed miserably using different techniques and subsequently having to restore three times from time machine which is costing me hours upon hours, I'm absolutely frustrated at how to do this ... all I want to do is migrate everything to a new user account and delete the old user and previous owner.
    Surely someone out there can provide a fool proof, simple and effective method to migrate the user data and keep intact? 
    Please help if you can!

    Pondini wrote:
    The only possible downside to this is, the transferred account may lose permission to the files on previous backups.
    Actually, there is a way to prevent that, also a bit odd.  On the old Mac, go to System Preferences > Accounts and unlock the padlock.  Control-click (right-click) the account you want to delete in the sidebar and select Advanced Options.  That will bring up a window like this:
    DO NOT CHANGE ANYTHING ON THAT WINDOW.  Just note the UID number.
    When you start up the new Mac, the first account created (during initial setup) is automatically assigned #501.  The next is 502, etc. What you want to do is, after creating the first account, Restart and set up one or more temporary accounts in a way that will include that number;  then set up an additional one (an Admin account with the identical names as the one you want to trash).  Then log on to the additional one, delete the temporary ones and Restart your Mac (to finish clearing the numbers).
    Log on and run Migration Assistant as above.  That way, you'll get the prompt to rename it as above, but the UID it has will not be a duplicate, so Migration Assistant can transfer it "as is."
    Message was edited by: Pondini

  • Migrating my data from one system to another

    Hi All.
    We have an application hosted on one SAP system. Now the users plan to use another server to host the application.
    All data related to that app (around 10 tables) need to be migrated over too.
    Is there any other way than to write a program to download/upload the data to/from a text/excel file?
    Anything we can do to avoid writing the programme?
    Thanks.

    Thanks Krishna. But can you please elaborate on what you are saying?
    How to "Add table values" to the TR?
    I thought we could only migrate if we had a maintenance view and from there it shall automatically include in the TR if we maintained it via SM30?
    But here the case is diff.
    It is an application table with no view. Lets say Table Z123. It has 5 fields with MANDT too.
    Now around 1000 entries have been filled by the application (program). Now how do I migrate those 1000 entries to another system via TR?
    Thanks again!

  • How to migrate the data from on version to another version in SAP

    Hai,
         Now iam working in Upgradation and Data migration Project. Iam new to this Project. My problem is we have the data of one module in 4.7e and we want that module data into upgrade verion say ECC 6.0. But we didnt want to upgrade that module. Pls guide me in this.

    hi,
    Welcome to SCN.
    if you want data of specific module to be transported to different version then you can use BDC,LSMW or BAPI for the transactions of that module according to your requirement.
    Also if you search in SCN with migrate data to different version you will get lot of posts.

  • Migrating your data from one pc to another?

    I recently installed photoshop elemens version 11 on a new laptop. I migrated the photo an film files. However, using the organizer the the files are recognized and shown, as usual. But the albums, created on the prevous laptop, were not recovered.

    mtyj wrote:
    I recently installed photoshop elemens version 11 on a new laptop. I migrated the photo an film files. However, using the organizer the the files are recognized and shown, as usual. But the albums, created on the prevous laptop, were not recovered.
    How did you move (migrate) your files ?
    The correct way fot the migration is:
    http://helpx.adobe.com/photoshop-elements/kb/backup-restore-move-catalog-photoshop.html

  • How do you do a quick transfer of data from one TX to another TX with different user name

    I have more than one TX and want to keep most of the information, addresses, media, calendar as well as third party software the same on all my TX's.  Is there a way to do this without the long hassle of exporting all that can be exported, and then importing it into each TX.  Then adding all the third party software again?  I have a new TX and remember how long this takes, so I am hoping for a faster method.   I already know how to do a transfer if using the same user name, but this won't work when each will have a different user name in order to hotsync.
    This may be a different question. All the TXs will be used and will sync to the same computer via USB, and all are on the Palm Desktop.   I want to use them interchangeably.  I would also like to keep the information current on all of them, as I now must copy paste any new info (ex. new address) into each via either palm desktop, or beaming to the others.  Often this leads to discrepancies of the data between the different TXs. 
    Post relates to: Palm TX
    Message Edited by Silfox on 06-22-2009 09:03 AM

    You might look into a program called "SyncUs" from an author in the UK.  It will keep all the PIM data synced between two Palm OS units.
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • How to migrate Open Directory from 10.6 to another server with 10.8?

    Hello all,
    I have a Mac Pro running Mac OS X Server 10.6.8 with Open Directory active. Now I bought a new Mac Pro running MAC OS 10.8 and I also bought the OS X Server app.
    What I want to know is how can I migrate the users and their home folders from old server with Snow Leopard to the new one? The Open Directory Archive does this job?
    Regards,
    Carlos.

    Ok. I did a test and I saw that it exports only the information account. So I suppose that I have to copy the home folder using scp or something similar. Is that correct? 
    I also have to keep the same hostname from the old server in the new server or this can be done in a different way?
    Thanks.

  • How to migrate the data from DB to another DB

    Hi folks,
                 In my project I have one requirement. Let me explain in detail we are maintain two databases one for
                 master database called *GIIS* and one is history database HIST. Both DB version is 10g R1.
                 (Both DB’s have same no table as well structures)
                 1.  The GIIS database contains nearly 400 tables (master table as well as temporary table)   
                       each Master table having it’s own temporary table.
                 2. Whenever we made the entry first it will go to temporary table after authorized that entry it will move to the master table
                 3. But the temporary table contains the data after move to master table .
                 4.     The temporary table data’s will be move to the HIST database each and every day at the night.
                    This migration we done through the procedure.  After migration complete the temporary table data’s will de deleted.
    My Question:
               1.     Whether it’s good practice to migrate the data from GIIS DB to another HIST DB using oracle stored procedure.
                     (we created the DB link from GIIS to HIST) 
               2.     If not can any one suggest me the way to migrate the data from GIIS to HIST.?
               3.     Is there any other possibility to migrate the data from GIIS to HIST with out using procedure?Thanks
    Arun

    Arun wrote:
    Hi Mr.Aman Brother
    First of all sorry . I am not saying that don't command my requirement. Just i want know the way of migrate the data from one DB to another DB.
    you saying that IMPORT/EXPORT is one of the way to do migration.
    But in client side they don't know how to do the IMPORT & EXPORT the database..
    Can you suggest me the another way to do that
    Arun,
    If the client doesn't know how to do exp/imp, I would really doubt and would be immensely concerned before suggesting the client any other way. If they don't know, tell them that there is a concept called test database which is used for learning so they should invest time to learn this technique since the other options suggested by fellow members are far more tougher than this one.
    Aman....

  • How to copy the data from one database to another database without DB link

    Good Day,
    I want to copy the data from one database to another database with out DB link but the structure is same in both.
    Thanks
    Nihar

    You could use SQL*Plus' COPY command
    http://technology.amis.nl/blog/432/little-gold-nugget-sqlplus-copy-command
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14357/apb.htm#sthref3702
    Edited by: Alex Nuijten on Sep 16, 2009 8:13 AM

  • I can't migrate my data from my old pc to my new macbook pro

    Hi,
        I have been trying to migrate my data from my PC to my new mac but it always seems to fail.
    At first, I would begin the migration assistant and then after a while the PC would just crash.
    But then I finally thought I managed to get it working. It said that process was complete (on both the PC and mac), but there was no data on my computer and no music in my iTunes.
    If anyone has any advice I would really appreciate it!!
    PS I also have an Ethernet cable if that's of any use but I don't know how to use it.

    I suggest you stop using the Migrastion Assistant. Simple fact is, as you have found out, that it does not work most of the time and when it fdoes actuall transfer data it doesn't do it very well.
    Just network the 2 computer together over your LAN and copy and past the files you want to move to the Mac.
    Otr use an External drive, formatted either FAT32 or exFAT (doinig the formatting on the Windows PC) and then copy to the external from the Win PC and then copy from the external to the Mac.
    You'll be happier.

  • Process to migrate configuration data from one BW development system to other

    Hi SAP Gurus,
    We need to migrate configuration data from one BW system DE1 to DE2.. Both systems are SAP net weaver  7.3.
    DE1 is BW pre-production system and DE2 is BW DEV.
    No transactional  data required.
    Please share a document if available.
    Kindly, let me know the procedure for Remote Client copy or client export/import with steps.
    Also let me know the pre-requisite for these activities.
    Thanks,
    Avadhesh Sharma
    +91 8095226536

    Hi,
    Remote Client Copy (SCC9)
    Remote client copy is performed in rare situation. When the client copy is done
    between two different SAP systems, the copy is called remote client copy.
    Before remote client copy is performed, a RFC connection must be set between those
    systems using SM59.
    1. Check RFC connection is working fine between two systems you want to perform
    remote client copy using SM59
    2. create client in the target system you want to copy the client
    3. login to target client using user SAP* and password PASS
    4. execute tcode SCC9 and select the RFC for the source system
    5. select the profile you want to copy like SAP_ALL
    6. select source client number you want to copy
    7. Select source client master data , mostly it is the same client number
    8. Now click on schedule as background job.
    9. Leave the background server field blank.
    10. Click schedule.
    11. Select Immediate from next screen.
    12. Save the screen.
    13. Client copy is scheduled now as a background job and client copy process started.
    14. The progress can be monitored using tcode SCC3
    Client Export/Import
    A client transport consists of two steps:
    First a client export extracts client data from the source client
    to files at the operating system level. Then the data is imported
    from the operating system files into the target client.
    To perform a client export, follow these steps:
    1. Log on to the source client. From the SAP initial screen,
    choose transaction SCC8 (Client Export). Select the data to
    be copied using a profile.
    2. Indicate the target system to which the client will be copied.
    The target system must be defined in TMS as part of the
    transport domain.
    3. Begin the client export. Because copying is a lengthy
    process, use scheduled background processing.
    Do not run any other client copy tool before the
    data export is finished.
    This export process will generate up to three data files at the
    operating system level:
    • RO< number >: this file contains cross-client data
    • RT< number >: this file contains client-specific data
    • RX< number >: this file contains SAPscript texts
    Depending on the type of data selected through the client
    transport profile, the client copy command files added to the
    buffer of the target system are as follows:
    • <S-SID>KO<number>: this file is for cross-client data
    • <S-SID>KT<number>: this file is for client-specific data
    • <S-SID>KX<number>: this file is SAPscript texts
    The client export change requests are not imported when an
    Import all takes place. Therefore, you must import these requests into the target client
    using TMS. Choose one of the transport requests of the client transport in the Transport
    Management System (TMS). The other transport requests belonging to this client
    transport are then automatically added in the correct order.
    After the import process has completed, post-import activities are required for object
    generation steps. After completing the import, log on to the target client. From the SAP
    systems initial screen, choose transaction SCC7
    Regards,
    Chandu

  • Migrating CMSA Assets and Data from one server to another

    Hello,
    Is there an official way to migrate the data from one CMSA installation to another one?  In the near future we're going to need to move from our development machine into the production environment, and it would be great if there was a way to get all the assets we've created in dev over to production without the need to manually re-create them all.
    Is this possible?
    Cheers,
    Kristian

    Check out http://help.adobe.com/en_US/LiveCycle/9.5/AssetComposerTechGuide/WS2bacbdf8d487e5824fb272 0612b944351b6-8000.html for this.

  • HT4889 Migrating data from one Mac to another using Migration Assistant

    Hi,
    I just migrated my data from my old Macbook to my new Macbook Pro. All of the data migrated as my old user, so now i have 2 users on my computer under my name.
    I am wondering how I can transfer the data from my old user (on my new computer after migration) to my new user on the new computer. Any thoughts?

    Rachelmischel,
    I wouldn't use migration assistant. I recently had to move all of my files from a 2008 macbook to a 2013 macbook air. It took me three days to try multiple attempts with migration assistant. What I did was create a drop box account with my macbook (my macbook air already had drop box installed) and then move files from my macbook into my drop box folder. Once that was completed, I would manually copy my files onto my macbook air. The catch is that you need to be sure your computer sharing is enabled and that you make sure your older macintosh will allow permission to your new macintosh to see its drop box files. Hope that helps!
    -Freecalls4j-

  • How to migrate the data from DEC RDB 5.1 to Oracle 11g

    Hi,
    As part of my project, we need to migrate the data from DEC RDB 5.1 present on Alpha server with VMS 6.1 OS into Oracle 11g. The size of the data in DEC RDB is around 40 GB.
    Could you please suggest various ways of getting this done in easy and simpler way?
    Thanks in advance.

    Hello,
    when Oracle bought Rdb from Digital Equipment Corporation (DEC) in 1994, the name of the product changed from DEC Rdb to Oracle Rdb. Meanwhile the actual version of Rdb is 7.2, so you are on a VERY old version. And that excludes the suggestions from the mentioned note to use a database link from Oracle RDBMS to Rdb, that is simply not possible with that old version of Rdb.
    But Rdb 5.1 knew already the Rdb Management Utility (RMU) - I just checked that with Rdb 4.1 which is even older.
    There are two commands that are helpful for your task.
    RMU/EXTRACT - that writes the metadata into a file. That output helps you to build a script to create all the objects in your target database.
    RMU/UNLOAD - that writes the data of each table into a formatted file (one file per table). That output can be used by the SQL*Loader to load your data into the target database.
    You can read all details about these commands in the online help on your Alpha. At first, issue the HELP command and look in the output list whether it lists a command RMU or RMU51. Then run that command:
    $ help rmu /extract
    and
    $ help rmu /unload
    Replace rmu by rmu51 if the help command shows you that rmu51 exists but not rmu.
    There is one caveat. Do you use blobs in your Rdb database? If you don't know that, create an the output with RMU/EXTRACT and search the output file for the string LIST OF BYTE VARYING. If there are none then you have no blobs. If you have some you need to take more care of them, they can't be unloaded into a formatted file, that must happen programmatical. If you have such fields then let me know, then I'll tell you how to get them out of your Rdb database.
    Best regards
    Wolfgang
    P.S.: For Rdb related questions it is better to ask in our Communities at https://communities.oracle.com/portal/server.pt/community/rdb_product_family_on_openvms . That forum is watched by Rdb Support and Development.

Maybe you are looking for