Urgent - ABAP subroutines - Proxy method
I am coding a proxy method.
I had to code a BDC call transaction. For this I have defined 2 sub-routines. One BDC_DYNPRO (for screen chnage) and BDC_Insert(for inserting the fields).
When compile the code, it is giving an error in the line just above the definition of the first sub-routine. <b>The error message is "ENDMETHOD missing".</b>
But there is an "ENDMETHOD" after the definition of the second sub-routine.
Are there any reservations for the sub-routines in OO-Context.
Can anyone help me with this.
reg
I did not get your point.
My code is:
method ZSMDII_MI_FUSION_PRODUCT_MAINT~EXECUTE_ASYNCHRONOUS.
code....
code...
<b>Error is being shown in this line</b>
Code of subroutine1.
code of subroutine2.
endMethod.
I can post my code here if this is not clear.
reg
Similar Messages
-
How The ABAP Proxy method gets triggered
Hi All,
I have created a ABAP Proxy for inbound interface.For this interface the data is coming from XI system.So i am writing the logic to read the XI data into an internal table and am populating the same data into a BAPI.
So my question is,once the XI system sends the data, Will this ABAP Proxy Method automatically gets trigger or Do we need to make any settings?
Please Help me As early as possible.
Thanks in advance
Regards
Srinivas KodukulaHi srinivas,
Refer the below points for the configuration needed at R/3 side:
1. Create a HTTP connection in the business system using transaction SM59
2. Configuration Business system as local Integration Engine in SXMB_ADM
3. Connection between Business System and System Landscape Directory. For this check the RFC destinations LCRSAPRFC and SAPSLDAPI
4. Maintaining the SAP J2EE Connection Parameters for LCRSAPRFC and SAPSLDAPI in SAP J2EE engine
5. Maintain SLD access details in Transaction SLDAPICUST
Regards,
Kiran Bobbala -
Abap proxy method execute synchronous
hey guys,
im new at XI and am posting this thread in the hope that someone would explain to me, what is required of the method "execute synchronous" in an abap proxy.
thanksHi,
<b>Execte_Synchronous</b> is used to send the message synchronously. Similarly execute_asynchonous is used to send the message asynchronously.
<b>Some theory about proxy.</b>
1. Proxies can be a server proxy or client proxy. In our scenarios we require proxies to send or upload the data from/into SAP system.
2. One more thing proxies can be used if your WAS ≥ 6.2.
3. Use Tcode SPROXY into R/3 system for proxy use.
4. To send the data from R/3 system we use OUTBOUND PROXY. In Outbound proxy you will simply write an abap code to fetch the data from R/3 tables and then send it to XI. Below is the sample code to send the data from R/3 to XI.
REPORT zblog_abap_proxy.
DATA prxy TYPE REF TO zblogco_proxy_interface_ob.
CREATE OBJECT prxy.
DATA it TYPE zblogemp_profile_msg.
TRY.
it-emp_profile_msg-emp_name = 'Sarvesh'.
it-emp_profile_msg-empno = '01212'.
it-emp_profile_msg-DEPARTMENT_NAME = 'NetWeaver'.
CALL METHOD prxy->execute_asynchronous
EXPORTING
output = it.
commit work.
CATCH cx_ai_system_fault .
DATA fault TYPE REF TO cx_ai_system_fault .
CREATE OBJECT fault.
WRITE :/ fault->errortext.
ENDTRY.
Receiver adapter configurations should be done in the integration directory and the necessary sender/receiver binding should be appropriately configured. We need not do any sender adapter configurations as we are using proxies.
5. To receive data into R/3 system we use INBOUND PROXY. In this case data is picked up by XI and send it to R/3 system via XI adapter into proxy class. Inside the inbound proxy we careate an internal table to take the data from XI and then simply by using the ABAP code we update the data inot R/3 table. BAPI can also be used inside the proxy to update the data into r/3.
I hope this will clear few doubts in proxy.
<b>How to create proxy.</b>
http://help.sap.com/saphelp_nw04/helpdata/en/14/555f3c482a7331e10000000a114084/frameset.htm
<b>
ABAP Server Proxies (Inbound Proxy)</b>
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
<b>ABAP Client Proxy (Outbound Proxy)</b>
/people/sravya.talanki2/blog/2006/07/28/smarter-approach-for-coding-abap-proxies
<b>Synchronous Proxies:</b>
Outbound Synchronous Proxy
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/abap%2bproxy%2boutbound%2bprogram%2b-%2bpurchase%2border%2bsend
Inbound Synchronous Proxy
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/abap%2bproxy%2binbound%2bprogram%2b-%2bsales%2border%2bcreation
Regards,
Sarvesh -
ABAP Server Proxy OR RFC - for attaching a file
Hello ABAP gurus,
Just to give a brief background, systems involved are ERP and PI
Certain Files (3 files to be exact) are generated in the ERP directory/file system
I need to transfer these files to PI "without" using the readily available FTP/NFS adapters (this is a limitation - no use of direct FTP is allowed)
Making the directory as a "shared" directory between ERP and PI is also not an option.
With the scenario above, I though of using an RFC or an ABAP Server Proxy to attach the said files to send them to PI
Which is the better way to do it?
I've seen a documentation for the ABAP Server Proxy that makes it possible to attach files to the proxy message, but for RFC I don't know if this is possible?
Your expert advise is highly appreciatedhI,
Use class CL_PROXY_CLIENT in the program and method IF_PROXY_CLIENT~EXECUTE.
You can refer documentation of this class as well as if you will search on any search portal using name of this class, you will get the briefe idea with the refernce procedure too.
Unfortunately I am unable to post you few links but try search on it, hopefully you will get it.
try below link.
<link to blocked site removed by moderator>
Edited by: Thomas Zloch on Oct 7, 2011 10:37 AM -
Abap Server Proxy acknowledgment
Hi All,
Typicall scenerio FILE->PI->ERP(abap server proxy).
is there any possibility(excluding BPM) to request acknowledgment from erp to be sent to pi and fill second column in sxi_monitor. similar situation to aleaud in idoc processing..
BR
Maciejis possible
take a loko to this.
http://help.sap.com/saphelp_nw04/helpdata/en/f4/8620c6b58c422c960c53f3ed71b432/frameset.htm
Acknowledgment Types
SYSTEM_OK
Positive system acknowledgment.
The receiver was reached successfully. For server proxies, this means that the implementing class for the server proxy was found and that the method for inbound processing could be called. -
Upload data from abap program to abap inbound proxy
Hi,
I have requirement to upload flat file data to an internal table and call Inbound proxy abap class and pass all the internal table data to tha proxy clas method structure.
So could any one help me how to send/pass data to class, Please give some e.g.
thanks
bobby
Edited by: Bobby G on Nov 18, 2009 4:35 AMhi;
you may follow the following ways
1. create a report and by using GUI_upload, give the path as default , you can convert the flat file's data into internal table.
2. call that report in proxy method by returning parameter as a table, this table can use further in the proxy.
Another way, you have
1. Create a transparent table and by using the GUI_Upload in report, you may store the data.
2. from step 1, you may use data in the proxy.
Regards
Shashi -
Hi,
Scenario - Client Proxy to JDBC.
I am getting Purchase order details out of Client proxy which goes and updates multiple tables at JDBC. I am doing this via single service interface to update multiple tables ( multiple statement element in JDBC target structure ).
Client Proxy
PO HEADER
PO DETAIL
PO TEXT
PO ITEM
JDBC tables
tbl_HEADER
tbl_DETAIL
tbl_TEXT
tbl_ITEM
Detail and ITEM tables from SAP has too many entries. When I tested in development for 14 PO header it had 1500 detaills, 500 text and 800 items. So i am thinking of breaking down of these PO headers in abap client proxy to trigger the abap proxy for every 50 PO header. So that it would not end up with huge PO details and text.
I am thinking of modifyin the abap code to send 50 PO header each time in client proxy.
loop on PO headers.
if lv_counter is 50.
call method to send via client proxy.
then next 50 records. so that we are sending in chunks.
PI would receive in multiple messages with consisting of 50 PO header and many item details. Does update/insert on JDBC table would affect. what precautions shd i take in PI considering update on JDBC
Kindly suggest with any inputs.
Thanks in advance.Hi,
You can use the update_insert option of the receiver jdbc canonical structure.
This would ensure that rows already existing would be updated and only the delta would be inserted into the tables.
Regards -
Superclass for ABAP server proxy?
Hi Experts,
I generated an ABAP server proxy by using a synchronous inbound interface of XI.
Can someone tell me which superclass does the server proxy use? I am trying to send an attachment back to XI in the proxy response but am not able to write the code of it.
Please help.
Thanks,
ShobhitHi Prateek,
This blog is for sending attachment in client proxy. (Sending data from ECC to XI using a trigger in ECC)
But my requirement is to send the attachment in server proxy (XI calling the ECC proxy program which returns the attachment back to XI synchronously)
For this purpose Im not able to use the code in https://weblogs.sdn.sap.com/pub/wlg/3509. [original link is broken] [original link is broken] [original link is broken]
The server prxoy does not recognize the statement
attachment_protocol ?= prxy->get_protocol(
if_wsprotocol=>attachments ).
as the superclass of this method is not accessable by this proxy interface.
HELP!!
Regards,
Shobhit -
Create a abap server proxy and consume the service with the pi WS Navigator
hi all:
i create a abap server proxy ,i use the t_code "sproxy" to generate the proxy, and then write the abap code to implemente the method; then i use the T-code (soamanager) to define the endpoint, but when i click the " Open WSDL document for selected binding" to get the WSDL file ; some error occur,the error is follow:
==========================================================================
Service cannot be reached
What has happened?
URL http://foxxi:50000/sap/bc/srt/wsdl/bndg_000C2938EF591DEE8A9A8D3DD5CCB6AD/wsdl11/allinone/ws_policy/document call was terminated because the corresponding service is not available.
Note
The termination occurred in system XIF with error code 403 and for the reason Forbidden.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If it is a valid URL, check whether service /sap/bc/srt/wsdl/bndg_000C2938EF591DEE8A9A8D3DD5CCB6AD/wsdl11/allinone/ws_policy/document is active in transaction SICF.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:FOXXI_XIF_00-v:0-s:403-r:Forbidden
HTTP 403 - Forbidden
Your SAP Internet Communication Framework Team
==========================================================================
when i go to the ws navigator to consume the service i can not find the service which i define, but some system content display , what's the problemhad a chance to look at this?
/people/jitender.chauhan/blog/2009/04/20/service-enabling-in-abap -
HOW TO EXECUTE ABAP SERVER PROXY?
Hi,
I am working on a scenario in which message is passed from Integration Server to ABAP server proxy.
In case of client proxy we execute EXECUTE_SYNCHRONOUS methjod of proxy,but I am bit confused in case of server proxies.
How do we execute server proxy method?Hi Similar to Client proxy, you will have the method EXECUTE_SYNCHRONOUS or EXECUTE_ASYNCHRONOUS for your server proxy. If your WebAS is based on 6.4 or above you can test the server proxy with a sample pay load very easily. In T-code sproxy, you will see a menu called proxy, Click on that and click test proxy, check the XML payload and you can enter the payload in the next screen and check your proxy..
Regards,
Jai Shankar. -
How to call ABAP client proxy?
Hello,
I am getting confused with ABAP client proxy now.
I've defined a outbound service interface (Message Interface) in PI, based on the service interface I generated the ABAP client proxy in the abap backend system. There are two possible ways to configuration the integration scenario for this interface:
1) use the proxy as web service consumer for scenario like: ws consumer --> PI
2) No web service, just proxy like: Proxy --> PI
Now I've configured a logical port (as default logical port) for scenario 1.
I wrote a ABAP program to call the proxy to send out message to PI. To call the proxy we instantiate the proxy like:
CREATE OBJECT proxy EXPORTING logical_port_name = p_port.
proxy->myOperation( ... ).
Now if I specify the logical_port_name, I think the local IE in the abap system knows to send out the message using web service (scenario 1). However if I do NOT specify logical_port_name, how the local IE knows which way to send out the message? Using web service with the default logica port, or directly post the message to the centrl IE pipeline using the second scenario ?
Anybody can clarify my doubts?
Thanks
EricEric
The answer to your question lies in the method CREATE_FRAMEWORK of class CL_PROXY_FRAMEWORK_OUTBOUND. In this method, you will see method GET_SOAP_APPLICATION of class CL_SRT_LP_MAINTANENCE is checked to see which adapter to use (i.e WS runtime or XI runtime).
Anyway, to give a straight answer to your question, if you maintained an endpoint for your interface in tcode SOAManager, the WS runtime/adapter is used to send the message to Integration server. If there is no endpoint maintained, then it uses the XI runtime (or the traditional proxy adapter).
Now, as far as logical port goes, if you didn't give a value when calling the proxy client class and you didn't maintain an endpoint in SOAManager, then XI runtime is used.
If you didn't pass a value to logical port but you maintained an endpoint which the default logical port, then the same is used and communication happens through WS adapter.
If you didn't pass a value to logical port but you maintained an endpoint and didn't mark the port as default, then a WS runtime exception is raised.
Hope this answers your question. For more information, try to take a look in the classes mentioned above.
KK -
ABAP Client Proxy to File (File is not getting generated)
Hi All,
I'm trying out a scenario ABAP proxy --> XI --> FILE.
I have followed the given blog to create ABAP client proxy.
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
While executing the ABAP client proxy, the values are properly sent to XI and in the SXMB_MONI the message shows as successful. But the correspoding file is not created.
It seems everything is fine in the receiver adpater(Monitoring) and in the SXMB_MONI also the msg shows successful(receiver side).
The directory path and the corresping file creation parameters also looks fine.
Couldn't figure out what went wrong. Please help me on this.
Thanks,
Ajay.Hi Smitha,
Please find below the Call Adapter trace
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
<Trace level="1" type="T">Party normalization: sender</Trace>
<Trace level="1" type="T">Sender scheme external =</Trace>
<Trace level="1" type="T">Sender agency external =</Trace>
<Trace level="1" type="T">Sender party external =</Trace>
<Trace level="1" type="T">Sender party normalized =</Trace>
<Trace level="1" type="B" name="CL_XMS_HTTP_HANDLER-HANDLE_REQUEST" />
- <!-- ************************************
-->
<Trace level="1" type="T">XMB was called with URL /sap/xi/engine?type=entry</Trace>
<Trace level="2" type="T">Request Line = POST /sap/xi/engine?type=entry HTTP/1.0</Trace>
<Trace level="2" type="T">Host = iscsapapp4w:8010</Trace>
<Trace level="2" type="T">Server protocol = HTTP/1.0</Trace>
<Trace level="2" type="T">Remote address = 10.191.117.166</Trace>
<Trace level="1" type="T">COMMIT is done by XMB !</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />
- <!-- ************************************
-->
<Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />
- <!-- ************************************
-->
<Trace level="3" type="T">XMB was called with external pipeline PID = ENTRY</Trace>
<Trace level="3" type="T">Getting type of XMB...</Trace>
<Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />
<Trace level="2" type="T">XMB kind = CENTRAL</Trace>
<Trace level="3" type="T">Start pipeline found</Trace>
<Trace level="2" type="T">Switch to external start pipeline PID = CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV">
<Trace level="3" type="T">No triggers found. OK.</Trace>
</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">XMB entry processing</Trace>
<Trace level="3" type="T">system-ID = NW2</Trace>
<Trace level="3" type="T">client = 100</Trace>
<Trace level="3" type="T">language = E</Trace>
<Trace level="3" type="T">user = XIAPPLUSER</Trace>
<Trace level="1" type="Timestamp">2006-04-03T10:24:14Z CET</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
- <!-- ************************************
-->
<Trace level="1" type="T">Message-GUID = B2DD6D78BBF141458DDC0DDE39782DE3</Trace>
<Trace level="1" type="T">PLNAME = CENTRAL</Trace>
<Trace level="1" type="T">QOS = EO</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />
- <!-- ************************************
-->
<Trace level="3" type="T">QOS = EO</Trace>
<Trace level="3" type="T">Message-GUID = B2DD6D78BBF141458DDC0DDE39782DE3</Trace>
<Trace level="1" type="T">Get definition of external pipeline = CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
<Trace level="3" type="T">External PLID = CENTRAL</Trace>
<Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
</Trace>
<Trace level="1" type="T">Get definition of internal pipeline = SAP_CENTRAL</Trace>
<Trace level="3" type="T">Generate prefixed queue name</Trace>
<Trace level="1" type="T">Queue name : XBTI0000</Trace>
<Trace level="1" type="T">Generated prefixed queue name = XBTI0000</Trace>
<Trace level="1" type="T">Schedule message in qRFC environment</Trace>
<Trace level="3" type="T">Setup qRFC Scheduler</Trace>
<Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
<Trace level="3" type="T">Call qRFC .... MsgGuid = B2DD6D78BBF141458DDC0DDE39782DE3</Trace>
<Trace level="3" type="T">Call qRFC .... Version = 000</Trace>
<Trace level="3" type="T">Call qRFC .... Pipeline = CENTRAL</Trace>
<Trace level="3" type="T">OK.</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Going to persist message</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="3" type="T">Version number = 000</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- <!-- ************************************
-->
<Trace level="3" type="T">Persisting message Status = 001</Trace>
<Trace level="3" type="T">Message version 000</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE">
<Trace level="3" type="T">Trace object available again now. OK.</Trace>
<Trace level="3" type="T">Message was read from persist layer. OK.</Trace>
<Trace level="3" type="T">Message properties in XMB object were setup. OK.</Trace>
<Trace level="3" type="ToDo">Make sure we catch exceptions in persist read</Trace>
<Trace level="3" type="ToDo">Tracing obj. not avail. before return of CL_XMS_MAIN-PERSIST_READ_MESSAGE</Trace>
</Trace>
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- <!-- ************************************
-->
<Trace level="3" type="T">message version successfully read from persist version= 000</Trace>
<Trace level="2" type="T">Increment log sequence to 001</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="3" type="T">system-ID = NW2</Trace>
<Trace level="3" type="T">client = 100</Trace>
<Trace level="3" type="T">language = E</Trace>
<Trace level="3" type="T">user = XIAPPLUSER</Trace>
<Trace level="1" type="Timestamp">2006-04-03T10:24:14Z CET</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- <!-- ************************************
-->
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
<Trace level="3" type="T">External PLID = CENTRAL</Trace>
<Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
</Trace>
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline attributes</Trace>
<Trace level="3" type="T">PID = SAP_CENTRAL</Trace>
<Trace level="3" type="T">ENABLE = 1</Trace>
<Trace level="3" type="T">TRACELEVEL = 0</Trace>
<Trace level="3" type="T">EXEMODE = A</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline elements</Trace>
<Trace level="3" type="T">ELEMPOS = 0001</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0002</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0003</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0004</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0007</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0008</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = =SWITCH=</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0009</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_RESPONSE</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T" />
<Trace level="1" type="Timestamp">2006-04-03T10:24:14Z CET Begin of pipeline processing PLSRVID = CENTRAL</Trace>
- <Trace level="1" type="B" name="PLSRV_RECEIVER_DETERMINATION">
<Trace level="1" type="Timestamp">2006-04-03T10:24:14Z CET Start of pipeline service processing PLSRVID= PLSRV_RECEIVER_DETERMINATION</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_RD_PLSRV</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_RD_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">R E C E I V E R - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
<Trace level="2" type="T">Start without given receiver</Trace>
<Trace level="2" type="T">Check conditions for rule line no. 1</Trace>
<Trace level="2" type="T">...valid Receiver w/o Condition: - ACN_LEGACY2_04_BS</Trace>
<Trace level="2" type="T">No Receiver found behaviour: 0</Trace>
<Trace level="2" type="T">Number of Receivers:1</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2006-04-03T10:24:14Z CET End of pipeline service processing PLSRVID= PLSRV_RECEIVER_DETERMINATION</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 001</Trace>
<Trace level="3" type="T">Message version 001</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
- <Trace level="1" type="B" name="PLSRV_INTERFACE_DETERMINATION">
<Trace level="1" type="Timestamp">2006-04-03T10:24:14Z CET Start of pipeline service processing PLSRVID= PLSRV_INTERFACE_DETERMINATION</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_ID_PLSRV</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_ID_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">I N T E R F A C E - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
<Trace level="2" type="T">Check conditions for (Inb: Party Srvc If) ACN_LEGACY2_04_BS MI_Client_Proxy_Inbound</Trace>
<Trace level="2" type="T">...valid InbIf without Condition: MI_Client_Proxy_Inbound</Trace>
<Trace level="2" type="T">Number of receiving Interfaces:1</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2006-04-03T10:24:14Z CET End of pipeline service processing PLSRVID= PLSRV_INTERFACE_DETERMINATION</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 002</Trace>
<Trace level="3" type="T">Message version 002</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
<Trace level="1" type="B" name="PLSRV_RECEIVER_MESSAGE_SPLIT" />
- <!-- ************************************
-->
<Trace level="1" type="Timestamp">2006-04-03T10:24:14Z CET Start of pipeline service processing PLSRVID= PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_XMS_PLSRV_RECEIVER_SPLIT</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
<Trace level="1" type="B" name="CL_XMS_PLSRV_RECEIVER_SPLIT-ENTER_PLSRV" />
- <!-- ************************************
-->
<Trace level="3" type="T">Case handling for different plsrv_ids PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="2" type="T">got property produced by receiver determination</Trace>
<Trace level="1" type="T">number of receivers: 1</Trace>
<Trace level="1" type="T">Single-receiver split case</Trace>
<Trace level="1" type="T">Post-split internal queue name = XBTOM2__0001</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Persisting single message for post-split handling</Trace>
<Trace level="1" type="T" />
<Trace level="1" type="T">Going to persist message + call qRFC now...</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- <!-- ************************************
-->
<Trace level="3" type="T">Persisting message Status = 012</Trace>
<Trace level="3" type="T">Message version 003</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE">
<Trace level="3" type="T">Trace object available again now. OK.</Trace>
<Trace level="3" type="T">Message was read from persist layer. OK.</Trace>
<Trace level="3" type="T">Message properties in XMB object were setup. OK.</Trace>
<Trace level="3" type="ToDo">Make sure we catch exceptions in persist read</Trace>
<Trace level="3" type="ToDo">Tracing obj. not avail. before return of CL_XMS_MAIN-PERSIST_READ_MESSAGE</Trace>
</Trace>
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- <!-- ************************************
-->
<Trace level="3" type="T">message version successfully read from persist version= 004</Trace>
<Trace level="2" type="T">Increment log sequence to 005</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="3" type="T">system-ID = NW2</Trace>
<Trace level="3" type="T">client = 100</Trace>
<Trace level="3" type="T">language = E</Trace>
<Trace level="3" type="T">user = XIAPPLUSER</Trace>
<Trace level="1" type="Timestamp">2006-04-03T10:24:14Z CET</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- <!-- ************************************
-->
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
<Trace level="3" type="T">External PLID = CENTRAL</Trace>
<Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
</Trace>
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline attributes</Trace>
<Trace level="3" type="T">PID = SAP_CENTRAL</Trace>
<Trace level="3" type="T">ENABLE = 1</Trace>
<Trace level="3" type="T">TRACELEVEL = 0</Trace>
<Trace level="3" type="T">EXEMODE = A</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline elements</Trace>
<Trace level="3" type="T">ELEMPOS = 0001</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0002</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0003</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0004</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0007</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0008</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = =SWITCH=</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0009</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_RESPONSE</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T" />
<Trace level="1" type="Timestamp">2006-04-03T10:24:14Z CET Begin of pipeline processing PLSRVID = CENTRAL</Trace>
<Trace level="1" type="T">Start with pipeline element PLEL= 5EC3C53B4BB7B62DE10000000A1148F5</Trace>
- <Trace level="1" type="B" name="PLSRV_MAPPING_REQUEST">
<Trace level="1" type="Timestamp">2006-04-03T10:24:14Z CET Start of pipeline service processing PLSRVID= PLSRV_MAPPING_REQUEST</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_MAPPING_XMS_PLSRV3</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV">
<Trace level="2" type="T">......attachment XI_Context not found</Trace>
<Trace level="3" type="T">Mapping is already determined in the interface determination</Trace>
<Trace level="3" type="T">Object ID of Interface Mapping 791955998E03380CA938A0130A348AFB</Trace>
<Trace level="3" type="T">Version ID of Interface Mapping 3475AE80930811DAA18DC14C0ABF75A6</Trace>
<Trace level="1" type="T">Interface Mapping http://accenture.com/xi101/ABAPclientProxy IM_Valuemapping</Trace>
<Trace level="3" type="T">Mapping Steps 1 JAVA com/sap/xi/tf/_MM_Valuemapping_</Trace>
<Trace level="3" type="T">Dynamic configuration is empty</Trace>
<Trace level="2" type="T">Mode 0</Trace>
<Trace level="3" type="T">Creating Java mapping com/sap/xi/tf/_MM_Valuemapping_.</Trace>
<Trace level="3" type="T">Load 3475ae80-9308-11da-a18d-c14c0abf75a6, http://accenture.com/xi101/ABAPclientProxy, -1, com/sap/xi/tf/_MM_Valuemapping_.class.</Trace>
<Trace level="3" type="T">Search com/sap/xi/tf/_MM_Valuemapping_.class (http://accenture.com/xi101/ABAPclientProxy, -1) in swcv 3475ae80-9308-11da-a18d-c14c0abf75a6.</Trace>
<Trace level="3" type="T">Loaded class com.sap.xi.tf._MM_Valuemapping_</Trace>
<Trace level="2" type="T">Call method execute of the application Java mapping com.sap.xi.tf._MM_Valuemapping_</Trace>
<Trace level="2" type="T">Java mapping com/sap/xi/tf/_MM_Valuemapping_ completed. (executeStep() of com.sap.xi.tf._MM_Valuemapping_</Trace>
<Trace level="3" type="T">Dynamic configuration is empty</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2006-04-03T10:24:15Z CET End of pipeline service processing PLSRVID= PLSRV_MAPPING_REQUEST</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 005</Trace>
<Trace level="3" type="T">Message version 005</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
- <Trace level="1" type="B" name="PLSRV_OUTBOUND_BINDING">
<Trace level="1" type="Timestamp">2006-04-03T10:24:15Z CET Start of pipeline service processing PLSRVID= PLSRV_OUTBOUND_BINDING</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_XMS_PLSRV_OUTBINDING</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_XMS_PLSRV_OUTBINDING-ENTER_PLSRV">
<Trace level="2" type="T">O U T B O U N D - B I N D I N G</Trace>
<Trace level="2" type="T">Cache Content is up to date</Trace>
<Trace level="2" type="T">determine OUTBOUND BINDING for:</Trace>
<Trace level="2" type="T">-ACN_Sender_BS_XI</Trace>
<Trace level="2" type="T">-ACN_LEGACY2_04_BS</Trace>
<Trace level="2" type="T">http://accenture.com/xi101/ABAPclientProxy.MI_Client_Proxy_Inbound</Trace>
<Trace level="2" type="T">Channel found: - ACN_LEGACY2_04_BS - ValueMap_Repl_Receiver1</Trace>
<Trace level="2" type="T">no header mapping defined</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2006-04-03T10:24:15Z CET End of pipeline service processing PLSRVID= PLSRV_OUTBOUND_BINDING</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 006</Trace>
<Trace level="3" type="T">Message version 006</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
- <Trace level="1" type="B" name="PLSRV_CALL_ADAPTER">
<Trace level="1" type="Timestamp">2006-04-03T10:24:15Z CET Start of pipeline service processing PLSRVID= PLSRV_CALL_ADAPTER</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV" />
- <!-- ************************************
-->
<Trace level="3" type="T">Calling pipeline service: PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = =SWITCH=</Trace>
<Trace level="3" type="T">ADRESSMOD = SD</Trace>
<Trace level="3" type="T">P_CLASS =</Trace>
<Trace level="3" type="T">P_IFNAME =</Trace>
<Trace level="3" type="T">P_METHOD =</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Unknown channel type: File</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = AENGINE</Trace>
<Trace level="3" type="T">ADRESSMOD = SD</Trace>
<Trace level="3" type="T">P_CLASS = CL_XMS_PLSRV_IE_ADAPTER</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- <!-- ************************************
-->
- <Trace level="1" type="B" name="CL_XMS_PLSRV_IE_ADAPTER-ENTER_PLSRV">
<Trace level="3" type="T">Channel for adapter engine: File</Trace>
- <Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP">
<Trace level="2" type="T">return fresh values from cache</Trace>
<Trace level="2" type="T">Get logon data for adapter engine (SAI_AE_DETAILS_GET): af.nw2.iscsapapp4w</Trace>
<Trace level="3" type="T">URL = http://iscsapapp4w.idcsap.com:51000/MessagingSystem/receive/AFW/XI</Trace>
<Trace level="3" type="T">User = XIISUSER</Trace>
<Trace level="3" type="T">Cached = X</Trace>
<Trace level="3" type="T">Creating HTTP-client</Trace>
<Trace level="3" type="T">HTTP-client: creation finished</Trace>
<Trace level="3" type="T">Security: Basic authentication</Trace>
<Trace level="3" type="T">Serializing message object...</Trace>
<Trace level="3" type="T">HTTP-client: sending http-request...</Trace>
<Trace level="3" type="T">HTTP-client: request sent</Trace>
<Trace level="3" type="T">HTTP-client: Receiving http-response...</Trace>
<Trace level="3" type="T">HTTP-client: response received</Trace>
<Trace level="3" type="T">HTTP-client: checking status code...</Trace>
<Trace level="3" type="T">HTTP-client: status code = 200</Trace>
<Trace level="3" type="T">Deserializing message object...</Trace>
<Trace level="3" type="T">HTTP-client: closing...</Trace>
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2006-04-03T10:24:19Z CET End of pipeline service processing PLSRVID= PLSRV_CALL_ADAPTER</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
- <!-- ************************************
-->
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 007</Trace>
<Trace level="3" type="T">Message version 007</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</SAP:Trace>
Thanks,
Jothivel. -
ABAP client Proxy authentication required
Hallo, my problem is about ABAP client Proxy authentication.
Scenario:
Our Dev. BW MWDCLNT600 queries forward a (RetailPro) database (JDBC Receiver C.Channel), by Dev. XI , in order to "drive" data extraction (realized, backward, from RetailPro to BW).
Forward communication from BW uses a call on ABAP Client Proxy technology (I mean, a BW class implements an XI outbound Message Interface).
Problem:
Something changed, we don't know what or where, and since last week everytime you execute the report (F8) you are prompted for an authentication popup.
Official manual guide is: (ABAP Proxy Generation)
http://help.sap.com/saphelp_nw04/helpdata/en/ba/f21a403233dd5fe10000000a155106/frameset.htm
in which you have to manage the 2 properties for credential supplying:
com.sap.aii.applicationsystem.serviceuser.name
com.sap.aii.applicationsystem.serviceuser.pwd
in order to "drive" authentication to Integration Engine.
In our scenario, ABAP report ZRTP_FLOW_CONTROL drives data extraction query, by a call to execute method
of class: ZCO_MI_FLOW_CONTROL_OB
which implements Outbound MI: MI_Flow_Control_OB (...all in SPROXY).
In SXMB_ADM, XI IEngine URL is correct...
In Exchange Profile, the 2 properties (see above) are correctly maintained (user: XIAPPLUSER, and password is OK)
Any suggestion?
Thanks all in advance!
GianlucaHi
I would like to suggest you to change the password in http destination (sm59) configured to comunicate with XI and put another one using UPPER case only. Another thing to check is tx SLDAPICUST. There is a problem in this transaction (I think it is a problem, maybe it's a feature , you need to use password with UPPER there to, and you need to double save the data there (change something, click save, change another thing, click save, and will work, otherwise not). Check tx SLDCHECK to see if connection with SLD and Integration Directory are ok.
Regards.
Roberti -
ABAP Client Proxy Testing process
In case of the Abap server proxy by using this report program SPRX_TEST_INBOUND we can test by providing the Generated interface name and method name.
same like any Testing process is there for ABAP Client Proxy
please respond me.
IF possible provide some Mail Path for ABAP Client ans Server Proxy so i can refer.
I get a one good scenario in www.****************
file to ABAPproxy.Hi,
For ABAP cllent proxy you need to develope your own ABAP code.
Please fidn here with the below link. Here you will get the testing ABAP code also
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
Use this kind of coding for abap client proxy
*& Report ZBLOG_ABAP_PROXY
REPORT zblog_abap_proxy.
DATA prxy TYPE REF TO zblogco_proxy_interface_ob.
CREATE OBJECT prxy.
DATA it TYPE zblogemp_profile_msg.
TRY.
it-emp_profile_msg-emp_name = 'Sravya'.
it-emp_profile_msg-empno = '80101'.
it-emp_profile_msg-DEPARTMENT_NAME = 'NetWeaver'.
CALL METHOD prxy->execute_asynchronous
EXPORTING
output = it.
commit work
CATCH cx_ai_system_fault .
DATA fault TYPE REF TO cx_ai_system_fault .
CREATE OBJECT fault.
WRITE :/ fault->errortext.
ENDTRY.
Thanks
swarup -
Problem with Consuming ABAP Server Proxy WSDL in InfoPath
Tried to design a InfoPath (MS Office 2003) form from a WSDL file of a web service generated from an ABAP Server Proxy in a NW2004s SP10 system. InfoPath rejected this WSDL with error InfoPath cannot use the selected Web service method for receiving data because the method does not provide valid XML data. Tried other WSDL files from other web services from ABAP Proxy with InfoPath, all got rejected.
Validated the WSDL file with XMLSPY, no error. Tried to import the WSDL into XI 3.0, no error. Also tried the WSDL in .NET C#, also worked fine. It seemed only InfoPath does not like this WSDL from ABAP Proxy.
Created a similar web service in XI 3.0 and InfoPath had no problem with its WSDL. Then I compared the two WSDL files. There are differences. After try and error on changing the differences, I have nailed down to the XML tag that caused the problem. Please see the extracted WSDL line attached at the end. In the XI 3.0 generated WSDL the wsdl:message and the wsdl:part have the same name. In the ABAP Proxy generated WSDL the wsdl:part has the name Parameters which is different from the wsdl:message. After I copied the wsdl:message name to the wsdl:part name, InfoPath accepted the WSDL file without any problem.
I know the fix but I like to find out the root cause. Is this a known issue? Did we miss some configuration setting thats causing this issue? Any help will be much appreciated.
WSDL from NW2004s SP10 ABAP Proxy
<wsdl:message name="RegionR3GetList_Req_MT">
<wsdl:part name="Parameters" element="tns:RegionR3GetList_Req_MT"/>
</wsdl:message>
<wsdl:message name="RegionR3GetList_Resp_MT">
<wsdl:part name=" Parameters" element="tns:RegionR3GetList_Resp_MT"/>
</wsdl:message>
WSDL from XI 3.0 Interface
<wsdl:message name="RegionR3GetList_Req_MT">
<wsdl:part name="RegionR3GetList_Req_MT" element="tns:RegionR3GetList_Req_MT"/>
</wsdl:message>
<wsdl:message name="RegionR3GetList_Resp_MT">
<wsdl:part name="RegionR3GetList_Resp_MT" element="tns:RegionR3GetList_Resp_MT"/>
</wsdl:message>Anne Tarnoruder has pointed out to me that her SDN article "Consuming SAP Enterprise Services in a Microsoft Office InfoPath Form" has described the the cause and workaround of this issue on page 9. I am extracting it below and mark this thread as answered. Thanks to Anne but not sure how I can award point to her.
Currently SAP supports only the Document style of WSDL, and not the Microsoft-specific RPC style, which causes a problem when consuming SAP services in the Microsoft environment. In this example, you need to apply a workaround that involves a minor correction of locally-stored WSDL files:
a. In the Project Explorer toolbar, click the Show all files icon and expand the Web reference folder.
b. For each Web reference in the project, perform the following steps:
c. Open the WSDL file, replace all instances of <wsdl:part name="parameters" with <wsdl:part name="parameter" (remove the s in parameters) and save the file.
d. Right-click the Reference.map file and choose Run Custom Tool to invoke a utility that generates code for XML Web services. This recreates the local proxy.
Maybe you are looking for
-
How can I use my 10.5 macbook to install 10.4 on an external drive?
I have to format a new drive on my imac, and that CD drive is not working. So I want to format it off of an external FW drive. I want to install 10.4 on that drive using my macbook (that has 10.5 installed) but the macbook will NOT reboot with the 10
-
Hdiutil segment to split a dmg
I am trying to split a large dmg file into smaller pieces for burning onto dvd. Using the command: hdiutil segment -segmentSize 4g -o foo.dmg foobar.dmg Here is the result: hdiutil: segment: format WRDU not recognized hdiutil: segment failed - Operat
-
HT4910 The copy to information of Mail is not correct!
We copied our Emails from iCloud to our computer and all Emails got lost on iCloud!
-
Cprojects and Activity Management i CRM
Hi, I have asked the same question below CRM without luck, so now I'm trying this forum... Has anyone of you explored whether there exist possibilities for triggering activies (CRM Activity Management) by doing changes in cProjects, e.g. changing sta
-
Short dump (DBIF_RSQL_INVALID_RSQL) during activating ODS
Hello Experts, I found short dump during activating ODS. The error message in short dump: Runtime Error: DBIF_RSQL_INVALID_RSQL Except.: CX_SY_OPEN_SQL_DB The termination occurred in the ABAP program "GP7WIVS2MDWGSTMN3ICFDKNAH65" in "ACTIVATE_SIDS".