Urgent: Degressif / Digressive Depreciation Method for France

Hello,
Has anyone implemented degressif / digressive depreciation method for France?
Per my understanding, the method starts of as a declining balance method and when straight line depreciation is higher, it switches to straight line depreciation method. This part is easy, can be achieved by changeover method.
1) However, after the switch, the asset is supposed to fully depreciate in two-years (even though that would mean shorter useful life than what is specified). This is the part where I am running into issues. I tried using a base method with explicit percentage, but SAP still continues the depreciation over remaining useful life - which is more than 2 years.
2) Secondly, the switch is supposed to occur at the beginning of a fiscal year, so changeover will happen beginning of the subsequent year and will get completed in two years.
Can anyone share their experiences in implementing this in SAP? Also, if anyone has link to the French Deggressif Depreciation in English, please share.
TIA,
- Manish Patel
Sr. SAP Solutions Consultant

hi,
have a look here:
http://help.sap.com/saphelp_470/helpdata/en/4f/71de21448011d189f00000e81ddfac/frameset.htm
Andreas

Similar Messages

Depreciation method for depreciation reintegration

Hello Guys,
I have a question on depreciation reintegration.
Businss Case:
Supposing that we have a given asset 2xxxx capitalized on 01.03.2009 and current period is 6 (and amortizations have been posted until period 5 included).
In most of the cases, our company scraps, sales or transfers its assets on an asset value date anterior to the current period, for example 01.04.2009.
How can I configure depreciation reintegration???
From my point of view, I need to focuse on depreciation method and on depreciation key (T_code AFAMA).
Do you have any idea witch of the following method should I focused on?
Base method?
Thanks for your comments.
Regards,
Karim

Assign this key to an asset and check it in your asset explorer if it depreciates fully within its useful life.
You can also add some config in your existing depr key..
in line 1.. select change method = 5,
add another line w/ ord depre, phase=2, Base method=017, multilevel method=002 and that warning message will go away.
check again in asset explorer if this is what you want.

Depreciation Posting for Unit of Production Method

HI,
This question is related to posting of Unit of Production depreciation method.
Ref to my own Thread - Hourly Depreciation on Assets
I have configured the deprecitaion key for UoP method. The same is been assigned in Asset Master.
But now the problem is, during AFAB processing the assets with UoP depreciation key is not getting picked.
Is there any other way to post the depreciation for such asstes?
Thanks & Regards,
Ajay Gupte

Hi,
Thanks for your replies.
1. UL field status is optional in "screen layout for depreciation areas" config and we do not want to change to any other method, t.code OA77 does not exist.
As per help for field UL it says "If a useful life is not entered in the asset class, and you use depreciation keys that calculate automatically, this field is a required entry regardless of the settings in the screen layout control".
2. Thanks for this we are using 0018, if we use 0019 it is calculating.
I will try this and let you know.
Regards
SM

**URGENT** No getter method for property searchText of bean org.apache.stru

I'm implementing a query page as described in the HowTo ADF_ComplexMasterDetail.zip
When running the query page, I'm receiving the error:
javax.servlet.jsp.JspException: No getter method for property searchText of bean org.apache.struts.taglib.html.BEAN
I have my searchEmployees writen and 'exposed' (at least I can see it in the Data palette). But seems like something is missing, and can't find this searchText beam property specified in the html:text tag.
Can someone help in this one?
Here is the Help description inside the HowTo example:
Section 3
queryEmployees
queryEmployeesInDept provides an interface for entering a simple search criteria for querying a list of
employees. This does not use the Find mode Query By Example functionality that the other query screens
use, but rather presents a much simpler search interface. The actual search is carried out using a
function
searchEmployees that the underlying view object exposes. (See the EmployeesView view object in the
model project)
1. Drop a new Data Page onto the page flow diagram call it queryEmployees
2. In the page flow diagram, drag the searchEmployees operation from the AllEmployeesView
collection in the Data Control Palette and drop it on top of the new Data Page. This will cause the
framework to run a search whenever the page is called.
3. In the Structure pane, locate the queryEmployees node and expand it, select the child node
paramNames[0], and change it's value attribute to ${param.searchText}. This will pass the URL
parameter searchText on to the business method to qualify the query.
4. Drill down into the page and expand the Data Control Palette to select the AllEmployeesView
collection. Set the Drag and Drop as: list to Read-OnlyTable. Then drag the collection onto the page.
This will create a tabular containing the query results.
5. Select the Struts HTML component palette and drag a Form onto the page above the output table. Set
the handling action to this Data Page (queryEmployees.do)
6. Drag a text field from the component palette inside of this new form. Set the property attribute of
the
<html:text> tag to searchText (the same value you used in the paramNames[0] for the Data Page)
7. Create a new submit button in the form to submit the search. Set the property attribute of the button
to
event_search.
8. Finally we need to subclass the data page to prevent the search action from being fired when it is not
appropriate for the page ( for instance when we first display it). To do this we need to Go to Code on
the Data Page's context menu, and override the invokeCustomMethod() method:
* We only want to invoke the custom method i.e. the call to change
* the Where clause on the collection, if the Action has been called with
* a search event on the page with a search term supplied.
* If the user got here via a link or another event, we bypass the model call
* unless a URL parameter event=search is supplied, in which
* case the method will also be called.
protected void invokeCustomMethod(DataActionContext actionContext)
List events = actionContext.getEvents();
// If the event is "search" do the custom event call
if ((events != null) && (events.contains("search")))
String searchTerm = (String)((DynaActionForm)actionContext.getActionForm())
Get("searchText");
if (searchTerm != null)
super.invokeCustomMethod(actionContext);
}

Solved with Oracle JDeveloper HowTo:
Creating Search Pages with Both Fixed and Dynamic Criteria
Author: Steve Muench, Oracle ADF Development Team
Date: September 16, 2004
http://www.oracle.com/technology/products/jdev/howtos/10g/dynamiccrit/index.html

Fixed Asset and Depreciation method in SAP B1 2005B

Hi All,
I want to know what is the method by which we can do depreciation for fixed asset in SAP Business One 2005B.
Looking for a postive response from all.
Regards,
Kawish

Hi Kawish,
The system supports the following forms of depreciation:
u2022Ordinary Depreciation
u2022Unplanned Depreciation
u2022Special Depreciation
And for the depreciation methods:
Straight-line
Immediate writeoff
multilevel method
declining-balance method
special depreciation
You can get more helpful documentations through partner portal:
Solutions-> SAP Business One-> Solution Overview-> Documentation
Resource Center-> SAP Business ONe Add-ons 2005-> Fixed Assets
Regards,
Candice Ren
SAP Business One Forums Team

Depreciation calculation for Indian Tax Depreciation Area - Fixed Assets

Can any one of you kindly advice how to setup the Multi levels methods and Period controls for Tax Depreciation key in Indian Tax Depreciation area.
My Leading ledger Fiscal year: Jan u2013 Dec (Year dependend)
And Non-leading ledger (India) Fiscal year: April u2013 March (Year dependend)
I was able to post correct depreciation for leading and non-leading ledger Depreciation areas with a stated percentage. But the calculation of Tax depreciation area is incorrect.
As per client requirement, Tax depreciation area is setup only reporting purpose and no Depreciation posting.
Required Depreciation Calculation for Tax Depreciation Area:
For Acquires & Additions,
Rule1:
If it is >=180 days (as per Non-leading ledger Fiscal year) the system should calculate depreciation as stated percentage. Eg: 10%
Rule2:
If it is <180 days (as per Non-leading ledger Fiscal year) the system should calculate depreciation of 50% on stated percentage. Eg: Stated percentage is 10%, then it should be 5%.
Early responses will be appreciated.
Thanks much for the help.
Regards,
Bapu

Hi JBC,
please search this Forum, I think basic questions about Indian tax depreciation have been asked dozen of times in this Forum here. You should find some answers in earlier threads.
Regards,
Markus

Depreciation calculation for Indian Tax Depreciation Area

Can any one of you kindly advice how to setup the Multi levels methods and Period controls for Tax Depreciation key in Indian Tax Depreciation area.
My Leading ledger Fiscal year: Jan u2013 Dec (Year dependend)
And Non-leading ledger (India) Fiscal year: April u2013 March (Year dependend)
I was able to post correct depreciation for leading and non-leading ledger Depreciation areas with a stated percentage. But the calculation of Tax depreciation area is incorrect.
As per client requirement, Tax depreciation area is setup only reporting purpose and no Depreciation posting.
Required Depreciation Calculation for Tax Depreciation Area:
For Acquires & Additions,
Rule1:
If it is >=180 days (as per Non-leading ledger Fiscal year) the system should calculate depreciation as stated percentage. Eg: 10%
Rule2:
If it is <180 days (as per Non-leading ledger Fiscal year) the system should calculate depreciation of 50% on stated percentage. Eg: Stated percentage is 10%, then it should be 5%.
Early responses will be appreciated.
Thanks much for the help.
Regards,
JBC

Hi JBC,
please search this Forum, I think basic questions about Indian tax depreciation have been asked dozen of times in this Forum here. You should find some answers in earlier threads.
Regards,
Markus

Tax Depreciation Calculation for Malaysia

Hi Guys,
We have a requirement to calculate Tax Depreciation for Malaysia with reference to the Capital Allowance.The scenario is like this:
For Asset Class say Office Equipments Initial Allowance is 20% and Annual Allowance is 10%
That means depreciation will be calculated @20% on the acquisition value immediately upon acquisition for one time. Again depreciation @10% per annum will be calculated on the acquisition value for the entire useful life of the asset from the date of acquisition.
Example: Asset is capitalised at MYR 10,000 on 1.1.2010
First Initial Depreciation would be: 20% on 10000= 2000
Annual Depreciation for 2010 would be : 10% on 10000= 1000 and this will be same for next 8 years.
Depreciation Method is SLM
In this case changeover should happen within the year.
Can you please suggest how to create a depreciation key in SAP for this.
Early respponse would be appreciated.
Regards,
Chandra

Hi Chandra,
Have you found the solution for this scenario?
Thanks

How to change the score method for ses crawler table result?

Hi,all
There is a customer urgent requirement,they want customize methods to score the result which come from database same table different column source for relevancy boosting.For example.there is a table t_table which have 3 column:name,short description,long description.Now i create 3 source for this table,every source has different content column.source 1's content column is name,source 2's content column is short description,source 3's content column is long description,is it possible for me to define the priority for those 3 source.For example,source 1 's priority is 50%,source 2 's priority is 30%,source 3 's priority is 20%.
By the way,i wonder that exists a API to fetch the result set score attribute and primary key value?
any advice is appreciate.

Kevin, have replied via internal mailing list on this. There is an undocumented method for boosting relevance by section. It is considered experimental at the moment and the exact details may change before we include it as a standard feature.

How to get the depreciation areas for an asset in particular period

Hi frndz,
how to get the depreciation areas for an asset in a particular period for writeup or manual depreciation method.
Thanks and regards.
Harisumanth.Ch

Try table ANLB, then read ANLC.
Regards.

Error: No permitted payment method for Payment Praposal in F110

Hello Experts,
I am trying to tigger an Idoc for payment from F110 and am getting the following error:
Job started
Step 001 started (program SAPF110S, variant &0000000002133, user ID )
Log for proposal run for payment on 27.01.2005, identification
Additional log for vendor 3803 company code 3000
Due date determination additional log
Document 1900004238 line item 002 via USD      100.000,00-
Terms of payment: 27.01.2005    0 0,000 %    0 0,000 %    0
03 days grace period is being considered
Payment must take place before 30.01.2005; next payment on 26.04.2008
Item is due with 0,000 % cash discount
Payment method selection additional log
Payment method selection for items due now to the amount of USD      100.000,00-
Payment method "C" is being checked
Bank details are being checked
System reads house banks and checks if they are allowed
Our bank 3000 is being checked
Bank different from the specified bank DBKA in master record or items
Our bank 3200 is being checked
Bank different from the specified bank DBKA in master record or items
House bank is selected ...
No permitted payment method exists
Information re. vendor 3803 / paying company code 3000 ...
... payment not possible because of reported error
End of log
Step 002 started (program SAPFPAYM_SCHEDULE, variant &0000000001217, user ID )
Step 003 started (program RFFOEDI1, variant &0000000000042, user ID )
Program RFFOEDI1: No records selected
Step 004 started (program RFFOAVIS, variant &0000000000044, user ID )
Program RFFOAVIS: No records selected
Job finished
Plesase suggest its very urgent.
Thanks,
Suma
Edited by: Suma B on May 3, 2008 9:42 AM

check payment in vendor master or invoice line items. May be payment method entered in parameters is different from vendor master data and invoice.
Check Payment method configuration for country and Company code
In Payment method for company code
check
minimum and maximum amount
foreign payments allowed or not
Check Bank determination for paying company code combination with payment method

Depreciation Expense For Related Project Assets

Dear All,
I have a question, Please help.
How can I post depreciation expense from Oracle Asset to Oracle Project Costing for assets that working and assigned to Projects like equipments and Cars that assigned to project..... and we want to post their deprecation expense as burden in oracle project costing ????
++Please find the below my search conclusion in past few days.++
1- Oracle Say that "There is currently no interface between Oracle Assets and Oracle Projects which allows you to post depreciation expenses directly to projects."
2- I have non-complete idea: I have a project Segment in AFF so I can Post depreciation expense for related project assets to GL directly, with Project segment value and create Expenditure Batch in Oracle costing to manually enter depreciation expense as lump-sum in Oracle costing but it is not preferred to create Entries in Subledger Accounting and not send it to GL so my question in this work-around, Can I Create Expenditure Batch and only create Distributions 'PRC: Distribute Labor Costs' ???
And don't create rest steps "PRC: Generate Cost Accounting Events,PRC: Create Accounting, PRC: Transfer Journal Entries to GL"
Please suggest best solution or help me in my work-around, its urgent
Thanks in Advance
I Orouk

Kindly find the below case as example ---
There are 5 equipment like trucks and cars that working in project X100 so I want to show depreciation expense for the mentioned assets as Burden on the X100 Project in Oracle Project Costing Module..
Please Consider the below focal points:
1- Regarding Oracle Assets business Cycles. Oracle Assets send depreciation expense to GL directly and there is no any impact in Oracle Project Costing about Depreciation expense(for Project related assets )
2- Project X100
Project Cost = 10000 $
Depreciation Expense for the 5 equipment (Project related assets) = 1000 $
Real Project cost = Project Cost 10000 + Depreciation Expense for the 5 equipment 1000 = 11000 $
I want to show Real Project cost in Costing Module so I have to record Assets Depreciation Expense for the Project related assets in Oracle Project Costing .... Can you help me about what the best way to record Assets Depreciation Expense for the Project related assets in Oracle Project Costing and please review my suggestion about expenditure batch in 1st post
Thanks in Advance
Iorouk
Edited by: user12255659 on Jan 23, 2012 12:56 PM

Alternative method for loadObjectLibrary()

Hi,
Iam new commer to this openscript.Urgent.. Please any one help me which one is the alternative method for loadObjectLibrary() in openscript9.2.

Termination
Set Up Personnel Actions
Create reasons for Personnel Actions
Define Action Type for Termination
Define Infogroups
Determine Periods of Notice
Before making the settings in feature 40TRM, you must set the same Action Type for the Action
Reasons N0, N1 and N2 in the table view Reason for Action (V_T530).
you can use IMG link under Payroll India -> Termination -> Create reasons for Personnel Actions.
For example- if 40TRM return value is 10 then there shud be action reasons N0, N1, N2 for the Action 10 in V_T530.
well 1 more thing, enter the pernr in termination workbench and press ENTER then try to check F4 of 'Reason'.
I know it looks funny but as the pernr is mandatory field there, you need to press 'Enter' after this.
Determine Deadline Type
Maintain Calculation Factor for Retiral Benefits
Calculation method for Notice Pay
Try this hope u have maintained the Gratutiy configuration correctly

Recalculation of dep by change in depreciation methods from wdv to slm

Dear all,
advice me as per indian accounting standard. I am in great need for this solution.
my scenerio
we are on ECC 5.0.
As per the standards if an organization change its depreciation method e.g from WDV to SLM or vise versa, system should recalculate the depreciation for all assets from first acquisition date. i am trying to explain the situation the following example:-
first acquisiton in assets X - 4/1/2000 for 50,00,000/-
dep method - WDV CALCULATED @ 13.91
both PLANT -1, PLANT-2 are in the same company code 1000.
in PLANT -1 - WDV METHOD
in PLANT-2 - SLM METHOD are used
up to 05.11.2007 the asset X is in PLANT -1 & dep is calculating @ 13.91 on WDV method.
on 06.11.2007 the asset X is transferred from PLANT -1 to PLANT-2 in which SLM METHOD @ 4.75%
is used.
present scenario
Depreciation is calculated up to november (8th period) of current year @ 13.91 on WDV method.
on this situation system should recalculate the past depreciation from 04.01.2000 as per SLM method and post the surplus in dec'08. i.e, reduce the depreciation amount in the current year.
is above situation is possible in SAP. if yes please explain in detail. if not then what is the best possible way to meet this requirement.
Thanks & regards,
Sandeep

Yes Sandeep, Change the Depr key (Depr method). Run AFAR to see whether the system recalculates the Depr for atleast the current FY, if not for the previous FY's.
Now Manually calculate the Difference in depr till last FY (WDV Depr minus SLM Depr) and post the difference amount thru ABZU transaction.
Check to which account the ABZU post the excess depr. You can post a rectification entry for the excess depr posted thru ABZU, if you want to transfer it from the existing account to the new account, for accounting purpose.
Please follow these steps in an order & revert in case you still have any questions.

Hard Issue: How to setup this uncommon Depreciation Method??

Hello All, thanks very much for reading my thread.
We faced an hard issue on FA.
Scenarios:
according to client's company policy, assets should can be depreciated after useful life! For example:
Asset "A", life year is 4 years. During 4 years, each year depreciation is "Cost * (1 / (Life + 1))" , after 4 years, each year depreciation is "Previous year depreciation * 1/2" until asset "A" is retired.
Year Depreciation
1 cost * 1/5
2 cost * 1/5
3 cost * 1/5
4 cost * 1/5
5 cost * 1/5 * 1/2
6 cost * 1/10 * 1/2
7 cost * 1/20 * 1/2
Do R12 can meet above requirement ? We try to use "Formula Depreciation Method" to setup, but finally we found Oracle Ebs NOT allow depreciate after useful year. In addition, does ebs R12 can set asset continuing depreciation after useful year????
If you are setting the Depreciation Method Formula, what is the formula you will give??
Do you have any proposal ?
Thanks a lot!! ^_^

Hello,
For uncommon depreciation methods, i usually do an "Unplanned Depreciation" on the asset. That is, I calculate it manually and adjust the depreciation.
Well this might be a workaround if ever no one come up with a standard solution.
Vikram

Urgent: Degressif / Digressive Depreciation Method for France

Similar Messages

Maybe you are looking for