URGENT:Deletion of Query from QA

I want to delete query from Quality system.
Proposed solution is deleting query in dev and then transporting same to QA.
I am confused little bit if i use RSZDELETE command will it ask for request or i should simply delete query from query deisgner after assigning it to one request.
Please provide me inputs regarding same as soon as possible.
Rahul

Rahul, you cannot Delete the already deleted Object again in Dev. SO, you are getting that error.
You may have inconsistencies between Dev and QAS. Look at the transport log of the Query. In the Log, it will state if the Query is deleted in QAS or it couldn't.
If you need to re-transport the deletion, don't try to collect the deleted Query again. It won't work. Instead, talk to BASIS and COPY the Transport Request (the already released one with the Query deletion) into a new transport request and move it to BQ3 again.
Also, sit with basis if neede dand analyze the transport log carefully. It will tell you what you need to know.
NOTE: IF you are using the same query in workooks, etc in BQ3, it cannot be deleted. This is a problem, so also go to BQ3 and see a where else you are using the that Query different from DEV.
Good luck
Uday Chamarthy

Similar Messages

Error when trying to delete a query from production

Hi Experts,
When i tried to delete a query from production system using RSZDELETE, I am getting an error message like " Query object 42BYOKUXDNZBZKMC2VHR5Z19H is blocked. Deletion has been cancelled."
i went to E071 table using SE16,and found out the transports which contains this particular object.This transports have returned error code 8.
Can anyone help me on deleting this object entry from these requests?
How will I delete this particular object entry from these transport requests?
Thanks alot
Shobin

Hi Venkat,
Thanks alot for your quick reply.
I tried that also. But even those transports are not successful.
I would like to know what is the standard procedure to delete objects from a transport request in production.
Already, I unlocked the transport request to Modifiable status.
Thanks alot
Shobin

I have deleted one query from production server

some one have deleted one query from production server. i would like to know who has deleted that query.
pls let me ASAP.
regards
raja

Hi,
You can get the time stamp( when it was deleted) from table RSRDELREPORTS. Based on that time check with basis guys to get the more info.
regards,
raju

Delete component query from a super query

Hi Experts,
I need to delete a component query from a super query. Can Any one give the steps to persue..
Thanks,
Pilliga

Hi,
When you load the super query, the query is displayed in a tree-like structure and the queries are referred to as branches.
In order to remove a component query from the super query, you must first select the parent operation (i.e. join or append), right click and select Delete Operation. You will then be prompted with a dialog box where you can specify to delete either the top or bottom branch (i.e. top or bottom query).
Cheers,
Tanish

How to delete a query from transport.

I have created 5 queries and added to a transport request, now I don't want to transport one query, how to delete it from transport request?
Thanks

Hi,
There you search for the query and delete that only.
Or just double click on the request in which you want to delete.It will shows as Display request, There find out the request with technical name, select it and choose cut, save the request.
it will delete the request.
Hope it helps you.
Let us know if you still have any issues.
Reg
Pra

Very urgent : Deleting unwanted documents from billing due list.

Hi all BP Experts,
Issue : User is getting cancelled Sales documents in billing due list.
Ideally it should not come.
Now he wants to remove those documents from list.
Please note that documents are for order related billing.
My query is why the due list is showing the documents which are already been cancelled ?
Second how to remove those documents from list.
Please help soon .
Points will be rewarded.
Thanx n regds!

Hi
I am just quoting the reply from 'Vikas Maurya's' issue from yesterday by 'Jhonny'. I presume your issues are related .Here was that reply
+++++++++++++
Hi Vikas,
OSS message 128947 is about items showing up in the due lists when they are not relevant. Try running the program RVV05IVB and see if that fixes it.
Johnny
+++++++++++++
Hope this will help in the resolution.
Greetings

How to delete a query in Quality System

Hi,
I would like to delete a ZZ query in Quality sytem directly. I don't have AUTHORIZATION delete using Tcode RSZDELETE. As this particulate query not avaiable in Development system, we can create a transport also.
Is there a way to delete directly in Quality System ?
Advance Thanks,
Rathinakumar

Hi,
If you do not have the authorization then#
goto the BEX (rrmx) and delete the query from there.
you can delete RSZDELETE or delete the entries in RSZCOMPDIR table by giving ur query as parameter.
also, check this thread:
how to delete a trasonported query?
hope it helps.
Regards,

How to delete Infoset Query in R/3

Hi Gurus,
I created a Infoset using SQ02 in R/3 and generated the query. Now I need to delete that Infoset query. Please advice me how to delete infoset query from the functional group in R/3.
Thanks
Liza

Hi,
In SQ01 ,press shift+F7 then find your user group. then from infoset query tab ,select ur infoset.
and try to delete , I think, it should work.
Regards
CSM Reddy

While deleting the query is shows error: errors: components (version A )

Hello All,
when deleting the query from Bex Query designer it shows the below error message but its showing using TC rszdelete.
using the BI AddON 7.X,Support Package 11,Revision 634.
Status Messages
errors: components 4lsxxxx (version a) do not exist on the database
errors: Element 4lsxxxx (version b) do not exist on the database
errors: components 4lsxxxx (version b) do not exist on the database
double the log it showing
Diagnosis
You have attempted to open query 4LT1JF8BXKJMK73TNIY15TRF0 from the Query Designer. However, this query does not exist in the database in the system to which you have made a connection.
System Response
Opening the query was terminated.
Procedure
Make sure that you have connected to the correct BW system. Note: The query may have been deleted by another user.

Hi,
>lower support package 5 its not showing the error message
:-D
SAP develops sometime bull ****.
=> there is no reason to show this message in the front end.
=> Sometimes I don't understand SAP procedure.
Nobody is interesting in this message. I have deleted this query. It's normally that this query isn't on the server now.
=> I know this message since years.
=> but nobody create a OSS message, or SAP corrects this feature.
Sven

How to unassign query from a role

Hi All,
I have wrongly published a query in a role through query designer 2 times. Can you pls suggest how to unassign the query from that role, Your quick response will be appreciated.
Thanks in advance,
Sananda

Use Tcode PFCG and there you can delete th query from the role. Then the query gets deleted only from that role view. Then you can assign it to the new role.

Delete duplicate entriess from the internal table its urgent pls help.

Hi friends,
Hope everybody is doing good,Here is m query on delete duplicate data from the intenal table.
I have an internal table which contain data in the following format.
Doc No Comp Cod Vendor Assignment
1500000009 JM11 00000000
1500000008 JM11 20070212(Repeating)
1500000007 JM11 20070212
1500000006 JM11 00000000
1500000005 JM11 00000000
1500000004 JM11 00000000(Repeating)
1500000003 JM11 00000000 (Repeating)
1500000002 JM11 00000000
1500000001 JM11 20050302
1500000000 JM11 00000000
1500000003 JM11 10000088
1500000001 JM11 10000088
1500000030 JM11 10006260
1500000010 JM11 10006269
1500000008 JM11 10006269
1500000006 JM11 10006269
1500000004 JM11 10006269
if you see the document numbers,there are some document number which are repeating here,there are some document numer which contain vendor number but not the assignments,some of the document numbers contain the assignments but not the vendors.
If my internal table contain this kind of data with repeted document numbers than i want the document number which contains only the vendor number.
Pls help me with the appropriate logic,its urgent.
Thanks a lot
mrutyun^

Hi,
Deleting Adjacent Duplicate Entries
To delete adjacent duplicate entries use the following statement:
DELETE ADJACENT DUPLICATE ENTRIES FROM <itab>
[COMPARING <f1> <f2> ...
|ALL FIELDS].
The system deletes all adjacent duplicate entries from the internal table <itab>. Entries are
duplicate if they fulfill one of the following compare criteria:
Without the COMPARING addition, the contents of the key fields of the table must be
identical in both lines.
If you use the addition COMPARING <f1> <f2> ... the contents of the specified fields <f1>
<f2> ... must be identical in both lines. You can also specify a field <fi> dynamically as
the contents of a field <ni> in the form (<ni>). If <ni> is empty when the statement is
executed, it is ignored. You can restrict the search to partial fields by
specifying offset and length.
If you use the addition COMPARING ALL FIELDS the contents of all fields of both lines
must be identical.
You can use this statement to delete all duplicate entries from an internal table if the table is
sorted by the specified compare criterion.
If at least one line is deleted, the system sets SY-SUBRC to 0, otherwise to 4.
Examples
DATA: BEGIN OF LINE,
COL1 TYPE I,
COL2 TYPE I,
END OF LINE.
DATA ITAB LIKE HASHED TABLE OF LINE WITH UNIQUE KEY COL1.
DO 4 TIMES.
LINE-COL1 = SY-INDEX.
LINE-COL2 = SY-INDEX ** 2.
INSERT LINE INTO TABLE ITAB.
ENDDO.
LINE-COL1 = 1.
DELETE TABLE ITAB: FROM LINE,
WITH TABLE KEY COL1 = 3.
LOOP AT ITAB INTO LINE.
WRITE: / LINE-COL1, LINE-COL2.
ENDLOOP.
The output is:
2 4
4 16
The program fills a hashed table with a list of square numbers. The DELETE
statement delete the lines from the table where the key field COL1 has the contents 1 or 3.
Regards,
Bhaskar

Af:query : Delete duplicate records from results manually

Hi
I have an ADF page with af:quey on a view object. I have created a viewcriteria to choose few attributes from the view object.
The view object is created manually using a sql query, where the query has joins to various other tables (it has outer joins too).
On submit, due to one to many relationship in the joins, i am getting duplicate rows in the results.
I am currently using 11.1.1.7.0 jDeveloper (We can't upgrade to upper versions due to other constraints of the project). I thought the property 'Selected in Query = false' on the view object attribute would fix this problem (to eliminate duplicate rows). But, i guess, 11.1.1.7.0 don't seem to be supporting this option.
Hence, i was thinking of manually deleting the duplicates from the results of the af:query before displaying it to the user.
Please let me know, if there is a better way to solve the problem, if not, how can i manually remove duplicates from the resultset before displaying the results.
I created a new QueryLIstener method to delete the duplicates, by executing the view object, but it retruns all the records without applying the criteria. May be i am doing something wrong.
Please suggest the best way.
Thanks
Pradeep

Hi Frank,
I do have a distinct in my sql but due to 1->M joins i get duplicate rows. I can avoid it only if i can unselect the attributes in the select.
I like to display the attributes to the user to choose the criteria (which adds as a predicate to the sql). But I would like to unselect the 1-M attributes from the results, so i get distinct rows as i have mentioned distinct in the sql.
Is there a way to restrict duplicate rows ?
Thanks
Pradeep

I want to delete my data from iphone while i doesnot have the access but i know my apple id so plz help me its urgent, i want to delete my data from iphone while i doesnot have the access but i know my apple id so plz help me its urgent

i want to delete my data from iphone while i doesnot have the access but i know my apple id so plz help me its urgent, i want to delete my data from iphone while i doesnot have the access but i know my apple id so plz help me its urgent

Welcome to the Apple Community.
You can only wipe your device when it is logged into iCloud and 'Find My Phone' is enabled, additionally the device will need to be switched on and connected to a wifi or cellular network.
Unfortunately, you cannot activate iCloud or 'Find My Phone' remotely.

Sending DELETE query from C++ scheduled program

hi all,
new Oracle user here (experiementing with 10g XE), can anyone help me with how to delete some records from a table from a C++ program? the records to be deleted will all have an expiry date in one column that has a date value older than the current system date
any help will be much appreciated!
jusef

As Vinendra pointed out you'll probably have to use PRO*C and invoke it from C++.
In PRO*C you'll use a SQL block to execute the delete statement. You can find examples if you search OTN and the internet.
Edited by: riedelme on Nov 24, 2009 5:23 AM

Delete many rows from one table at once URGENT

Assume we have table called emp.
table desription:
SQL> desc emp
Name Null? Type
EMPNO NOT NULL NUMBER(6)
DIVISION NOT NULL NUMBER(3)
JOB_NO NOT NULL NUMBER(4)
START_DATE NOT NULL DATE
select * from emp;
EMPNO--------DIVISION--------JOB_NO------------START_DATE
1111------------------011-------------8181--------------04/10/1999
1111------------------011-------------8181--------------04/10/2004
2222------------------011-------------3131--------------05/11/2005
3333-----------------022-------------8181--------------06/09/2001
3333-----------------044-------------8181--------------06/08/1988
5555-----------------011-------------8066--------------01/01/2001
6666-----------------033-------------9600--------------01/01/1999
7777-----------------044-------------8181--------------06/24/1996
7777-----------------033-------------8181--------------12/02/1991
7777-----------------033-------------8181--------------03/01/2002
9999-----------------044-------------9191--------------03/05/1980
9999-----------------055-------------9191--------------03/06/1989
My goal is to delete employee records for those employee which contains multiple values for JOB_NO
equal to 8181, (JOB_NO= 8181) with new start_dateS.
We need to keep only one record for JOB_NO 8181 which contains oldest start_date.
Here is the delete statement for the single record.
delete from emp
where empno = 7777 and job_no = 8181 and start_date in ('03/01/2002','06/24/1996);
So how could I delete thousands records from the table with this logic?
After deleting multiple records table should be as below:
select * from emp;
EMPNO--------DIVISION--------JOB_NO---------START_DATE
1111-----------------011-------------8181--------------04/10/1999
2222-----------------011-------------3131--------------05/11/2005
3333-----------------044-------------8181--------------06/08/1988
5555-----------------011-------------8066--------------01/01/2001
6666-----------------033-------------9600--------------01/01/1999
7777-----------------033-------------8181--------------12/02/1991
9999-----------------044-------------9191--------------03/05/1980
9999-----------------055-------------9191--------------03/06/1989

Here's one way to do it. I think this fits your business rules. At least it matches the output for your first example. It uses an analytic. I just like using them.
SQL> select * from employees;
               EMPNO             DIVISION               JOB_NO START_DATE
                1111                   11                 8181 10-APR-1999
                1111                   11                 8181 10-APR-2004
                2222                   11                 3131 11-MAY-2005
                3333                   22                 8181 09-JUN-2001
                3333                   44                 8181 08-JUN-1988
                5555                   11                 8066 01-JAN-2001
                6666                   33                 9600 01-JAN-1999
                7777                   44                 8181 24-JUN-1996
                7777                   33                 8181 02-DEC-1991
                7777                   33                 8181 01-MAR-2002
                9999                   44                 9191 05-MAR-1980
                9999                   55                 9191 06-MAR-1989
12 rows selected.
SQL> delete employees
2 where rowid in
3           (select rowid
4            from
5            (
6               select empno
7                     ,job_no
8                     ,start_date
9                     ,row_number() over (partition by empno, job_no order by start_date) rn
10               from   employees
11               where job_no = 8181
12            )
13            where rn > 1
14           )
15 ;
4 rows deleted.
SQL> select * from employees;
               EMPNO             DIVISION               JOB_NO START_DATE
                1111                   11                 8181 10-APR-1999
                2222                   11                 3131 11-MAY-2005
                3333                   44                 8181 08-JUN-1988
                5555                   11                 8066 01-JAN-2001
                6666                   33                 9600 01-JAN-1999
                7777                   33                 8181 02-DEC-1991
                9999                   44                 9191 05-MAR-1980
                9999                   55                 9191 06-MAR-1989
8 rows selected.

URGENT:Deletion of Query from QA

Similar Messages

Maybe you are looking for