Urgent Help with network access to FileOutputStream

URGENT HELP NEEDED GUYS...I am stuck on this past 2 days. I tried several alternatives but to vain.
I am trying to access a Folder on a user's computer which is lying in a different Domain.
For accessing this folder, I have the following information with me.
Domain name, PC name, folder name, windows username, windows password.
Note: This username and password will give me rights to read + write to that folder.
How to use these information to open a fileoutputstream ? Does the java.io package allow programs to pass a username, password , domainname, pcname and then the folder and filename to create/read/write files..
Pls. suggest code examples. Sometime back I posted this query but didnt get an answer to my satisfaction. I have tried at my end but unsuccessful yet. Help would be appreciated.
I am trying this on a Windows File System and Network domain
THIS IS V. URGENT
Thanks,

Hi HJK,
I am referring to the last reply of yours.
" Hi, there are three approaches I can think of offhand:
1) make sure the user-context under which you run the java app has the right to access the remote drive.
2) Do the network connection in a batch or c program and call that at the start of your java app with Runtime#exec.
3) Write some c/c++ code to open the connection and integrate that via JNI.
Let me know what (other) solution you came up with in the end!
Regarding the 1st.
I am supposed to write a remote installation utility actually. There are around 200 PC(s) in a network on which I need to copy these java class files. My problem statement is such that at runtime I only have username, passwords, domain access. I am not supposed to map any drives. Its supposed to be done dynamically. No manual intervention required. :(
How do I do the network connection in a batch mode ? Let me know that?
If 2nd option can be done, probably I can think of action-3 at the moment I am quite blurr :(

Similar Messages

Help with guided access

I need help with guided access! My friend's ipod touch 4 used guided access. She can't turn off her ipod touch, and the home button won't work. When she uses the home button, it shows a message that says she needs to click it 3 times. How do i fix it? Please help!

See:
iOS: About Guided Access
In case i forget my guided access...: Apple Support Communities
SOS I cannot Exit Guided access: Apple Support Communities

Need help with thinkvantage access connection

Here a log file with new access connection:
Connection status:  Disconnected
Cause:  Driver disconnected while associating.
Error code:  229378
Recommended actions:
Verify that the encryption settings (WEP/TKIP/AES) specified in this profile match those expected by the wireless network.
Verify that the wireless adapter in your computer has not been restricted from accessing the radio channels being used by the wireless network.
If the problem persists, contact your network administrator and provide the troubleshooting information below.
Adapter Details
Adapter name  11a/b/g Wireless LAN Mini PCI Express Adapter
Adapter type  Wireless LAN
Adapter speed  54.0 Mbps
Driver/Firmware version  7.6.0.96/ N/A
Adapter status  Enabled
Connection Status  Disconnected
Disable unused cards?  Yes
TCP/IP Settings
DHCP enabled?  Yes
Append parent suffixes of the primary DNS suffix?  Yes
Register connection's DNS suffix in registration?  Yes
Register connection's DNS suffix in DNS registration?  Yes
Enable LMHOSTS Lookup?  No
NetBIOS setting  "Default"
Wireless Settings
Network name (SSID)  linksys
Connection type  Access point
Wireless mode  Auto
Security encryption  None
System Information
System model  7732CTO
BIOS version  7LETB7WW (2.17 )
Operating system version  Windows Vista, Service pack 2
Access connections version  5.31
Access Point scan list
Network name (SSID)              Wireless mode MAC address                   Signal strength Channel
linksys                          802.11g        00:1C:10:54:65:B6              24%            11
Global Settings
Network
Allow all users of this system to switch to any existing location profile  -> No
Allow the wireless LAN radio to be turned off when inactive  -> No
Allow selection of location profiles with Fn+F5 On Screen Display menu  -> Yes
Enable autodeletion of unused profiles  -> Yes
Notifications
Show ThinkVantage Access Connections status icon in task tray  -> No
Show wireless status icon in task tray  -> No
Display the progress indicator window when a profile is being applied  -> Yes
Preferences
Enable sound effects  -> Yes
Do not show balloon tips from the Access Connections system tray icon  -> Yes
Show WiMAX page as default on Main GUI  -> No
Automatic location profile switching list
Include Ethernet connections in automatic switching and prompt me to save Ethernet ports  -> Yes
When no other connections are available, connect through Wireless WAN or WiMAX  -> No
Wireless priority list
Selection    Priority     Location profile name                                            Connection order                 Connection details
No                  1     linksys                                                          Wireless LAN                     SSID: linksys
Log File
Debug Log is enabled
It didn't happen when I use old version. Can anybody help me?

Are you getting any error message while connecting to ds..?
Are you able to go online on wired computer...?
Are you able to go online on any wireless computer on your network..?
Open the router setup page and under the wireless tab,Change the Channel width to 20MHz only and Channel to 11-2.462GHz and click on save settings...Under the Advanced Wireless Settings...Change the Beacon Interval to 75,Change the Fragmentation Threshold to 2304,Change the RTS Threshold to 2304 and Click on Save Settings...
Now,check.

Mac OS X help with share access on a windows 2003 server

Hello everyone
I am not too familiar with Mac OS X (Darwin) and so on and need a little help.
We recently got a new windows 2003 standard server and I want to move my files to there so they get backed up and so on. I am able to access shares on the pc's on our network but when I try to access the server from finder i just get a box pop up saysing do you want to fix or delete the alias.
When I try to access it via a terminal, because I am a bit more ok with the cmd line thanks to my linux capabilities, I get the following error:
mount_smbfs: tree connect phase failed: syserr = Permission denied
when i try:
mount_smbfs //dan:[email protected]/General\ Files /BB-SERVER/General\ Files
Is there anybody that has experienced this before and that can help me resolve this.
Thank you in advance
Kobus

Hi Kobus Bensch,
I'm sorry I am not able to help with your questions about sharing from your Mac to the server but wanted to suggest that you post back the exact Mac OS version you are using. Your specs below your post suggest 10.0.x which was barely a beta version of Mac OS X. This will surely help those who are seeing your topic and trying to help.
To find the version you can simply click on the blue Apple in your top menu bar and select About This Mac.
good luck,
littleshoulders

Need help with networking external hard drive

Hi,
I am working on a corporate network and I have a Western Digital My Book Studio Edition external hard drive attached to a Mac OSX 10.4. i have other Macs connecting through the network to this Mac and accessing the external hard drive and it works just fine for that.
What I need help with is the fact that I also have several PCs on the same network (all XP), that need to connect to the hard drive and access the files. I've been able to connect to the Mac using the XP by accessing the IP address. I also set the Mac up with password credentials so that I had to log in to the Mac to access the files. But when I try to access the Mac, it only shows the main computer drive as the only available share and no external drive.
Does anyone know how to access a Western Digital external drive on a Mac from a PC through a network?

For an external hard disk drive or other (different) system shared
storage devices to work, they probably should be formatted in a
format seen by both operating systems.
If the WD unit is not seen by Windows computers on your network,
the WD may have been formatted in HFS+ for the Macintosh. That
is OK unless you need a Windows computer to access the same.
The Macintosh can see and use a standard Windows disc format;
so the external drive may need to be reformatted away from HFS+
if that is really what is going on (and archive any data on the suspect
drive elsewhere, since it will be lost to reformatting overwrites)
and then both Mac OS X and Windows should see the files on there.
And Macs set up to run Windows may also see the non-Mac format;
without having to re-boot via BootCamp, if that option is in use.
As to the other question(s) I really have no idea at this point in time.
And since that may be the rub, hopefully someone will follow up here.
Good luck & happy computing!

Urgent help with Pages 5.0 needed

Hi guys,
I need urgent help! I deleted Pages 5.0 (as I HATED it) but now can't open a very important document. Can someone please tell me how to reinstall it??
Thanks
Kellie

Downloading again is not as easy as that. you must find the app in the "Purchased" section of the
app store and I think you then must hold down the option key to reinstall it.
BTW, I only worked with one document as a trial for Pages 5 and then imported it to Word and saved it. I then deleted Pages 5 (I can't believe anyone who works with software would think that piece of worthless junk would sufice for anyone who uses a word processor professionally), reopened the Word document and saved it in Pages 09.
I hope this helps

URGENT help with BOOTCAMP

hi guys
Need urgent help before i throw my macbook pro retina 15'' 2013 out the window.
Ive installed Windows 7 onto my macbook via bootcamp, everything ok, but it doesnt recognise anything i put in external disc drive, so i cant install and drivers or find my network or anything, im so sorry if its so simple but im such a novice, and installing windows 7 is an accomplishment in itself, can someone please help me?
many thanks

http://www.amazon.co.uk/Integral-32GB-Courier-Flash-Drive/dp/B007ZSLZ5E/ref=sr_1 _12?s=computers&ie=UTF8&qid=1363213300&sr=1-12#productDetails
this work?

Urgent Help with Planning Book

Hello Gurus,
Need your help with a very urgent issue. I cannot see my key figure values in my planning book(Interactive Planning). I could sucessfully generate my CVC, then initialised my planning area. Then when I go the interactive planning I can see all my characteristics -Ex Material master( has all values), Prod type has values, etc. Iam in DEV system and have to move the whole config to QA now. I have to validate that the config works in QA. Its works ok in the sandbox but I cannot figureout why I can not see the values for key figs that Iam loading from a Flat File. Please help!!!!!!

Hello Suresh,
I have one more question for you. Let me tell you my scenario. I have the client giving me a rough forecast for the future. I have to do stat forecast based on the history and check that against the initial forecast given by them. But, the problem I realised now is that when I go to my planning books I can see the values for 2008 in mothly buckets since I have 0calmonth. But the client gave me another file with forecast for 2008 in monthly buckets and for 2009 and 2010 in quarter buckets. So, i have a planning buck profile defined to meet that but, how do I upload the file with both 0calmonth and 0calquarter in a single file. Please let me know!! Urgent task.
Thanks again,
Chinna.

Need urgent help with HSDIO hardware timing

Hi everyone,
I need urgent help regarding HSDIO hardware timing. I've been working in a project which generating serial ramp using HSDIO pxie device.
I'm using clock rate 40MHz and generating 14 bit of boolean for each step of ramp. And I have to generate simply 256 steps ramp.
Which means, 256 (steps) x 14 (boolean array) x 25 ns (period of 1 boolean value) = 89,6 ns.
What I'm doing right now is with using index of FOR loop as my input data (converting the index into 14bit boolean), then write into pxie device in every iteration,
which means, my data is getting into output in every 1ms time, right? (I'm using windows)
And I want to be able to generate faster than that.
How can I prewrite my 256 steps ramp, then write them all at once into pxie device. I'm really stuck here.
In the picture can you see how I do the write into device in every iteration of FOR Loop.
Regards,
Yan.

hi, thanks for responding.
with using example of dynamic generation with script, I can manage to generate the ramp with controllable delay (generate the whole waveform, including delay with script command, then write to the card).
But I still have 1 question, I can test the output of the generation using oscilloscope and cant see the start delay (I'm writing delay at the start, before generating the ramp). My signal generated at 0 sec.
How can I check this start delay? is there any good example delivered with Labview to check this generation? Somehow I cant use the "dynamic generation and acquisition" example to see my generation (cant figure out how to capture the generated signal).
regards,
Yan.

Urgent Help; Everyone has access to restricted rooms

Hi Everybody,
I need some urgent help.
I have created some collaboration rooms based on a restricted room template and everyone seems to have access to the room.
It is behaving as if it is a public room.
Now we are just a couple of days from go-live and it is extremely urgent to resolve these issues.
Any help would be appropriately rewarded.
Regards,
Vibhu

Hi Vibhu,
you should check the room role assignments and page
permissions. You need to log in as a room administrator
and go to the "Admin: Room" page.
Regards,
Darin

Help with data access

Hi,
I am new to Java and stuck at a problem. Situation is like following-
package X
public abstract class A {
     A(int a) { this.a=p; }
     protected int p;
     abstract int func();
package Y
public class B extends A{
     B(int b) { super(b); }
     B() {}
     //p is accessible here
     int func() {
          D d=new D();
          d.func2();
    static void main() {
        func();
public abstract class C extends B{
public class D extends C implements interface{
     int func2() {}
}Now my problem is when I try to access p from func2(), I am getting a NullPointerException error. I am not initialising p anywhere through D()'s and B()'s no argument constructor. Is that the problem?

When you post code it doesn't help when the code doesn't actually reflect the problem.
The code you posted isn't legal java so given that it won't even compile you certainly can't get a null pointer exception from that. And where you commented the usage of 'p' you can't use it there so that doesn't help with guessing what you actual code might have looked like.
So all I can do is offer the following general advice.
Null pointer exceptions occur because a reference is null and it is de-referenced.. Thus if you do a line like the following.
xxx.p
Then 'xxx' is the only possible thing that can be null.
The stack trace of the exception will tell you the exact line that the problem occurred on.

EJB with network-access-point exception "getServerChannel() not supported."

Hi,
My task is to get a specific remote bean only to be available on a certain port (still using the t3 protocol). The bean is called MyRemoteBeanEJB. I have tried to accomplish this with the use of network-access-point In my weblogic-ejb-jar.xml:
     <weblogic-enterprise-bean>
          <ejb-name>MyRemoteBeanEJB</ejb-name>
          *<network-access-point>MyChannel</network-access-point>*
     </weblogic-enterprise-bean>
And on the AdminServer i have created a channel called MyChannel ( [Network Channel|http://i.imgur.com/3tss0.png] ). I'm running Weblogic Server 10.3.2 with EJB3.0.
The channel is active (from the debug output):
<Notice> <Server> <BEA-002613> <Channel "MyChannel[11]" is now listening on 127.0.0.1:7042 for protocols t3.>
THEN from my fat client i look up the remote bean, everything works fine,
MyRemoteBeanInterface remoteBean = ic.lookup(..); // t3://localhost:7042
BUT when i try to call a method I get the following output on the server:
<2012-dec-05 kl 15:56 CET> <Warning> <RMI> <BEA-080004> <An error was thrown by rmi server:
java.lang.AssertionError: getServerChannel() not supported.
java.lang.AssertionError: getServerChannel() not supported
at weblogic.rjvm.RJVMImpl.getServerChannel(RJVMImpl.java:769)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:568)
at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:230)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:477)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:473)
at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
If I remove the network-access-point tag it works (but I loose the point of restricting the bean to a certain port).
I decompiled the weblogic.rjvm.RJVMImpl class found in wlfullclient.jar (the client jar with all weblogic deps), and at line 769:
public ServerChannel getServerChannel() {
throw new AssertionError("getServerChannel() not supported");
Google let me down and really, i have no idea what's wrong.... Maybe i'm not using it in an expected way or i'm missing something.
Anybody with any insights or even better, solutions?!
Thanks!

Syed,
First off, for voice, you will need -65dBm at the edge of the cell. If you are trying to cover outside areas then the 1500 or 1550 is your best choice if you can provide a mounting area and power. I don't know your coverage layout, but you can use the 1142's inside but not outside. You should also use the latest 1.4.x on the phone. It's tough to provide voice coverage outside unless you can place mesh AP's outside at given locations. You will also need QoS enabled on both the wireless and wired.
Sent from Cisco Technical Support iPhone App

Need urgent help with Ifs1.1 on Solaris

We have installed IFS 1.1 with Oracle 8.1.7 on a three tier System (two Suns). We use JWS as WebServer. When we start IFS and JWS everything seems to work fine. But after some time (irregulary) we are not able to contact the JSP-Sites via a bowser. After restarting JWS, everything works fine for some time.
Sometimes it happens (about one times a day), that the whole JWS crashes (JWS-Admin doesn't work). So we have to restart the whole IFS.
What can be the problem? We need urgent help, because the deadline for our project is Wednesday.
By the way:
Where do I have to start CTX on the IFS- or the Oracle-Side?
null

Yes, we tried the Oracle HTTP - Server, but we weren4t able to get it to work. We didn4t get our JSP-Files to work with it. But that is another issue. I think it4s not a problem of JWS, but IFS.
Additionally it is strange, that we are still able to connect to the database via SqlPlus.
IFS works fine for about 15 minutes, than it crashes, nothing works anymore. We found following errors in the IfsAgents.log:
maybe it can help?!
Mon Dec 04 23:12:20 CET 2000
Server STARTED: IfsAgents(19944) not managed
Attempting to load agent EventExchangerAgent
Agent EventExchangerAgent loaded
Server STARTED: IfsProtocols(19945) not managed
Attempting to start agent EventExchangerAgent
EventExchangerAgent: Start request
Agent EventExchangerAgent started
Attempting to load agent ExpirationAgent
Agent ExpirationAgent loaded
EventExchangerAgent: starting timer
Attempting to start agent ExpirationAgent
ExpirationAgent: Start request
Agent ExpirationAgent started
Attempting to load agent GarbageCollectionAgent
Agent GarbageCollectionAgent loaded
ExpirationAgent: computed initial delay (in ms) is: 10024504
ExpirationAgent: starting timer
Attempting to start agent GarbageCollectionAgent
GarbageCollectionAgent: Start request
Agent GarbageCollectionAgent started
Attempting to load agent ContentGarbageCollectionAgent
Agent ContentGarbageCollectionAgent loaded
GarbageCollectionAgent: computed initial delay (in ms) is: 11816890
GarbageCollectionAgent: starting timer
Attempting to start agent ContentGarbageCollectionAgent
ContentGarbageCollectionAgent: Start request
Agent ContentGarbageCollectionAgent started
Attempting to load agent DanglingObjectAVCleanupAgent
Agent DanglingObjectAVCleanupAgent loaded
ContentGarbageCollectionAgent: starting timer
Attempting to start agent DanglingObjectAVCleanupAgent
DanglingObjectAVCleanupAgent: Start request
Agent DanglingObjectAVCleanupAgent started
Attempting to load agent OutboxAgent
Agent OutboxAgent loaded
DanglingObjectAVCleanupAgent: computed initial delay (in ms) is: 5500105
DanglingObjectAVCleanupAgent: starting timer
Attempting to start agent OutboxAgent
OutboxAgent: Start request
Agent OutboxAgent started
Attempting to load agent ServiceWatchdogAgent
Agent ServiceWatchdogAgent loaded
OutboxAgent: Done processing
Attempting to start agent ServiceWatchdogAgent
ServiceWatchdogAgent: Start request
Agent ServiceWatchdogAgent started
Attempting to load agent QuotaAgent
Agent QuotaAgent loaded
ServiceWatchdogAgent: Initializing ServerWatchdogTable with 9 entries
ServiceWatchdogAgent: starting timer
Server STARTED: FtpServer(20082) managed by IfsProtocols(19945)
ServiceWatchdogAgent: New Server being watchdogged
Attempting to start agent QuotaAgent
QuotaAgent: Start request
Agent QuotaAgent started
QuotaAgent: starting timer
Server STARTED: CupServer(20124) managed by IfsProtocols(19945)
ServiceWatchdogAgent: New Server being watchdogged
Server STARTED: ImapServer(20130) managed by IfsProtocols(19945)
ServiceWatchdogAgent: New Server being watchdogged
Server STARTED: SmtpServer(20150) managed by IfsProtocols(19945)
ServiceWatchdogAgent: New Server being watchdogged
ServiceWatchdogAgent: Unlocked Server Detected in checkServer
ServiceWatchdogAgent: Unlocked Server Detected in checkServer
ServiceWatchdogAgent: Unlocked Server Detected in checkServer
ServiceWatchdogAgent: Unlocked Server Detected in checkServer
ServiceWatchdogAgent: Unlocked Server Detected in checkServer
ServiceWatchdogAgent: Unlocked Server Detected in checkServer
ServiceWatchdogAgent: Unlocked Server being investigated
ServiceWatchdogAgent: Unlocked Server being investigated
ServiceWatchdogAgent: Unlocked Server being investigated
ServiceWatchdogAgent: Unlocked Server being investigated
ServiceWatchdogAgent: Unlocked Server being investigated
ServiceWatchdogAgent: Unlocked Server being investigated
ServiceWatchdogAgent: Freeing unlocked server 19687
ServiceWatchdogAgent: Freeing unlocked server 19666
Server STOPPED: CupServer(19687) managed by IfsProtocols(19519)
ServiceWatchdogAgent: Freeing unlocked server 19723
ServiceWatchdogAgent: Freeing unlocked server 19520
Server STOPPED: FtpServer(19666) managed by IfsProtocols(19519)
Server STOPPED: SmtpServer(19723) managed by IfsProtocols(19519)
ServiceWatchdogAgent: Freeing unlocked server 19519
Server STOPPED: IfsAgents(19520) not managed
ServiceWatchdogAgent: Freeing unlocked server 19712
Server STOPPED: IfsProtocols(19519) not managed
Server STOPPED: ImapServer(19712) managed by IfsProtocols(19519)
ServiceWatchdogAgent: Freed Server removed from watchdog list
ServiceWatchdogAgent: Freed Server removed from watchdog list
ServiceWatchdogAgent: Freed Server removed from watchdog list
ServiceWatchdogAgent: Freed Server removed from watchdog list
ServiceWatchdogAgent: Freed Server removed from watchdog list
ServiceWatchdogAgent: Freed Server removed from watchdog list
QuotaAgent: Timer event: 0 active; 0 exceeded
ContentGarbageCollectionAgent: Freed 5 unreferenced ContentObjects
QuotaAgent: Timer event: 0 active; 0 exceeded
ServiceWatchdogAgent: IfsException publishing timer details:
ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-11012: Unable to get events from other services
java.sql.SQLException: ORA-03114: not connected to ORACLE
ServiceWatchdogAgent: IfsException in checkForDeadServices():
ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
java.sql.SQLException: ORA-03114: not connected to ORACLE
ServiceWatchdogAgent: IfsException in handle loop; continuing:
ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
java.sql.SQLException: ORA-03114: not connected to ORACLE
ServiceWatchdogAgent: IfsException publishing timer details:
ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
java.sql.SQLException: ORA-03114: not connected to ORACLE
ServiceWatchdogAgent: IfsException publishing timer details:
ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
java.sql.SQLException: ORA-03114: not connected to ORACLE
ServiceWatchdogAgent: IfsException publishing timer details:
ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
java.sql.SQLException: ORA-03114: not connected to ORACLE
ServiceWatchdogAgent: IfsException publishing timer details:
ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
java.sql.SQLException: ORA-03114: not connected to ORACLE
ServiceWatchdogAgent: IfsException publishing timer details:
ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
java.sql.SQLException: ORA-03114: not connected to ORACLE
null

Urgent help with Port Forwarding?

Hi all!
I hope my posting in the right section.
Basically I have a DVR in my home. I want to be able to view the 1 camera that I have externally (from a different home)
I have managed to be able to view the camera internally on my network (the dvr is plugged into the BT HUB 3)
I did this by Advanced Settings>Port Forwarding>Supported Apps>
I was told by the Manifacturer of the DVR that the ports i needed to forward are 8234 to 8239
Does this look correct to you guys?
The DVR i have a is a Digital Sprite 2 PLUS. Ive turned the firewall off on the router settings as I thought that could be the problem. I can view the dvr internally as I said above using the DVR i.p 192.168.1.69 perfectly, but when I type in my external i.p via my other home it wont connect at all.
Could anybody help me as to what im doing wrong?
Thanks for any replys !
James.

You are replying to an old posting.
The information on this link may help you.
Port forwarding problems
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Need help with network user accounts on Mac server App on Yosemite, any tips?

I've been trying to set up a small network with the Server app on Yosemite. I don't want to do anything crazy with the server, I'd just like to know how I can set up network user accounts so that they can login from other Mac computers on the same network. I already have Open directory set up, the Macs that will be used on the network with the server have already been joined to the server under login options. I have created the network user account, I have also joined the user account to a group that I created. When I try to login to the network account from one of the Macs, it doesn't work. I'm pretty rookie with Mac server, can anyway give me any pointers of what I should be doing? Or if I am doing something wrong. Thanks guys.

The most important step, once you've got Open Directory and DNS set up, with Local Network Users set up in Server.app, is to make sure that all client Macs are using the server's IP address as the primary DNS server in System Preferences > Network, and that they have joined the Network server in System Preferences > Users and Groups > Login Options.
Having said all that, I have just spent hours setting this all up only to find out that Mail doesn't currently work with Network Homes in 10.10.3 / Server.app 4.1.
I will be hoping that Apple recognise the bug, and put out a fix soon.

Urgent Help with network access to FileOutputStream

Similar Messages

Maybe you are looking for