Urgent: leading zeros in sapscript
hi gurus,
how can i remove leading zeros in sapscript form so if the matnr 00000010 would be 10 only?
please help.
thanks!
Hi,
Do like this
&V_MATNR(Z)&
&symbol(Z)& Omit Leading Zeros
&symbol(S)& Omit Leading Sign
&symbol(<)& Display Leading Sign to the Left
&symbol(>)& Display Leading Sign to the Right
&symbol(C)& Compress Spaces
&symbol(.N)& Display upto N decimal places
&symbol(T)& Omit thousands separator
&symbol(R)& Right justified
&symbol(I)& Suppress output of the initial value
Regards,
Satish
Message was edited by:
Satish Panakala
Similar Messages
-
&CAUFVD-MATNR& with leading zeros in sapscript
Hi,
i use &CAUFVD-MATNR& in an sapscript-formular for an PP-Order.
It prints the MATNR without leading zeroes.
How is it possible to print this field with leading Zeros?
Thanks.
Regards, Dieterhi,
use these function modules.
CONVERSION_EXIT_ALPHA_INPUT Conversion exit ALPHA, external->internal
CONVERSION_EXIT_ALPHA_OUTPUT Conversion exit ALPHA, internal->external
reward points if hlpful. -
** Please help urgently ** Budget upload field with leading zeros
We need to load a characteristic that has leading zeros. For example 0000350. When saving down to CSV, we lose the leading zeros (0000) so that only 350 is loaded into BW. Saving the codes as 'text' in excel does not seem to help.
We cannot therefore see the name for any of these codes when refreshing the workbook in BW.
Could some please urgently tell us the correct method to save the file for loading into the BW infopackage, with all zeros intact ?
Regards, FrederickHi Frederick,
Just some additional thoughts,
assuming field A1 in Ecel contains 350 and you want to create a string with 8 digits, you could use formula '=text(A1;"00000000")' in an empty column and copy it back to column A. Then 00000350 should be provided in A1. This can be saved in a normal .csv file and be opened with a text editor (e.g. notepad) in order to check content.
If you don't want to manipulate Excel data, transformation to a field with leading zeros can be easily be processed with a routine in transfer rules.
Regards
Joe -
Hi,
I want to add leading zeros to negative values.
<b>Present Value :</b> -567
<b>Expected Value :</b> -0000000567
I know to adding leading zeros with the help of CONVERSION_EXIT FM.
Thanks in advance.
Regards,
Kumar.Hi
Use below FM.
CONVERSION_EXIT_ALPHA_INPUT
Try out below FM with the above one.
<b>CLOI_PUT_SIGN_IN_FRONT</b>
<b>ISJP_GET_SIGN</b>
or you can use
<b>WRITE variable USING EDIT MASK '-___________'.</b>
or
<b>CONCATENATE syntax</b>
Hope it will solve your problem
<b>Reward Points if it is helpful.</b>
Message was edited by:
ilesh 24x7
Message was edited by:
ilesh 24x7 -
SapScript problem with leading zeros
Hi,
I print field LTAP-NLENR.
But when i use <AP-NLENR& leading zeros are cut.
I need to display it with leading zeros. (ex. 0000000000010000000001)
Please help.
Regards,
Greg.<AP-NLENR(K)& works fine for me with your requirment.
I have defined a L_VAR like this:
data: L_VAR type LTAP-NLENR.
l_var = '0000000000010000000001'.
In my script I use like this:
P1 &L_VAR(K)&
SO, try to pass that value to some other variable and see what happens.
Regards,
Naimesh Patel -
HOW TO TRUNCATE LEADING ZEROS [ URGENT ]
A PROGRAM TO GET THE LENGTH OF THE SRVPOS [ SERVICE NUMBER]
BUT IN OUTPUT IT IS GIVING 12 LEADING ZEROS WHAT SHALL I DO TO REMOVE LEADING ZEROS AND TO GET THE LENGTH OF THE SRVPOS [ SERVICE NUMBER] AFTER REMOVING LEADING ZEROS
TABLES: ESLL.
DATA: BEGIN OF IT OCCURS 0,
SRVPOS LIKE ESLL-SRVPOS,
END OF IT.
DATA:LEN TYPE I VALUE 0,
IT1 TYPE I,
IT2 TYPE C VALUE 0,
N(15) VALUE'1000000000000'.
SELECT SRVPOS INTO IT FROM ESLL .
IT1 = IT MOD N.
IT2 = IT1.
LEN = STRLEN( IT2 ).
WRITE: / LEN,IT2.
ENDSELECT.Hi Shailendra
We can use SHIFT LEFT command in this case.
Eg: SHIFT LEFT <var> DELETING LEADING '0'.
or FM: CONVERSION_EXIT_ALPHA_INPUT
data: var(10) type c value '0000000123'.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
EXPORTING
INPUT = var
IMPORTING
OUTPUT = var.
Kind Regards
Eswar
Message was edited by:
Eswar Rao Boddeti
Message was edited by:
Eswar Rao Boddeti -
SAPSCRIPT: How to Remove Leading Zeroes?
What syntax (or symbol) for the following field would I include so it will not print the leading zeroes of that field?
&CAUFVD-RSNUM&
Thank-You.Use the "Z"
&CAUFVD-RSNUM(Z)&
Regards,
RIch Heilman -
How to delete leading zeros in sap script
Hi
In sapscript iam facing an issue with num4 field.
Iam using this field to display Serial.No
it is displaying '1' as 0001 i want to display here 1 with out leading zeros.
If there any solution let me knowHi,
Try below code
data: w_vbeln type vbak-vbeln,
w_char(10).
w_vbeln = '000012345'.
write w_vbeln to w_char no-zero.
or
The function Module 'CONVERSION_EXIT_ALPHA_OUTPUT' is used to remove the leading zeros in a field.
the following is a sample code which i have used for 'Commitment item' in my report. replace the field with your required field.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
EXPORTING
INPUT = IT_FMIT1-RFIPEX
IMPORTING
OUTPUT = IT_FMIT1-RFIPEX.
Regards,
Chandru -
Display of leading zeroes when downloaded from ALV to excel
Hi All,
I have a problem in ALV grid display.
There is a specific field which has value starting from '001' to '999'. This is a char(3) type of variable.
The problem is that the display shows the value as '001' which is correct. but when the same file is dwnloaded to excel using standard SAP functionality, the value of the field gets changed to '1' instead of '001'.
Is there any option by which this can be controlled. Please let me know, its urgent!!
thankshi Ankur,
the Excel download is done by Z program? IF yes you have to do:
SET PROPERTY OF go_cell 'NumberFormat' = '@'.
this will set the Excel cell to Text type and leading zeros won't be lost.
ec -
hi,
how can i put leading zeros (functionality of FM CONVERSION_EXIT_ALPHA_INPUT) in SAP Script??
b'coz of not having leading zeros in PO number,i m facing problems in fetching the PO header text(text id = F01) using INCLUDE syntax.
Message was edited by: kaushal malavia
Message was edited by: kaushal malaviasreenivas,
here goes my script coding..
/: DEFINE &W_EBELN& = &EKKO-EBELN&
/: PERFORM ZERO_PADDING_PO IN PROGRAM ZSXXSR103S
/: USING &EKKO-EBELN&
/: CHANGING &W_EBELN&
/: ENDPERFORM
and here goes my routine coding.
*& Form ZERO_PADDING_PO
FORM ZERO_PADDING_PO TABLES TAB_IN STRUCTURE ITCSY
TAB_OUT STRUCTURE ITCSY.
DATA : W_EBELN LIKE EKKO-EBELN.
CLEAR W_EBELN.
REFRESH TAB_OUT.
PERFORM GET_VALUE TABLES TAB_IN USING 'W_EBELN' W_EBELN.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = W_EBELN
IMPORTING
OUTPUT = W_EBELN.
CLEAR TAB_OUT.
TAB_OUT-NAME = 'W_EBELN'.
TAB_OUT-VALUE = W_EBELN.
APPEND TAB_OUT.
ENDFORM. " GET_VALUE
*& Form GET_VALUE
-->I_TAB_IN
-->I_NAME
-->O_VALUE
FORM GET_VALUE TABLES I_TAB_IN STRUCTURE ITCSY
USING I_NAME
O_VALUE .
CLEAR O_VALUE.
READ TABLE I_TAB_IN WITH KEY NAME = I_NAME.
O_VALUE = I_TAB_IN-VALUE.
ENDFORM. " GET_VALUE
can u point out error in code ?? in debuging i can see the value of W_EBELN is geting leading zero padded but when it comes back to SAPSCRIPT it gets changed to original value of without leaing zeros. -
How to remove leading zeroes on form.
Hi all,
Is there a way that I can remove the leading zeros that come along with the Serial number from showing in my form.
i.e for example: the value of &QALS-EMATNR&
Actual value in the databse table is : "0280012380",
Printing value on the form is : "000000000280012380",
Now I should get the actual value of the field EMATNR
I had tried with the ways like..
&QALS-EMATNR(Z)&
&QALS-EMATNR(CIZ)&
Is there any aternatives???
Thanks,
Surender.Hi
If you print 000000000280012380 it means the value in the variable QALS-EMATNR is 000000000280012380.
The field EMATNR has MATNR as domain, this is a type char long 18, it has the routines MATN1 for input/output convertion and that routine doesn't delete the leading.
I think the option Z works for type number only, so u need to delete the leading zero before printing the data.
So just as somebody said u can use the fm CONVERSION_EXIT_ALPHA_OUTPUT in order to convert the output format, u should use it in driver program:
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
EXPORTING
input = QALS-EMATNR
IMPORTING
output = QALS-EMATNR.
If you can't change the program, u can create a routine (form) in a new program and call it by the sapscript:
/: PERFORM DELETE_LED_ZERO IN PROGRAM ZPROGRAM
/: USING &QALS-EMATNR&
/: CHANGING &QALS-EMATNR&
/: ENDPERFORM
* &QALS-EMATNR(Z)&
So create the new program where defining the routine
FORM DELETE_LED_ZERO TABLES IN_TAB STRUCTURE ITCSY
OUT_TAB STRUCTURE ITCSY.
DATA: MATNR TYPE MATNR.
READ TABLE IN_TAB WITH KEY NAME = ' QALS-EMATNR'.
IF SY-SUBRC = 0.
MOVE IN_TAB-VALUE TO MATNR.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
EXPORTING
input = MATNR
IMPORTING
output = MATNR
READ TABLE OUT_TAB WITH KEY NAME = ' QALS-EMATNR'.
IF SY-SUBRC = 0.
MOVE MATNR TO OUT_TAB-VALUE.
MODIFY OUT_TAB INDEX SY-TABIX.
ENDIF.
ENDIF.
ENDFORM.
Max -
Leading Zeros of Consumption in historical time series are not considered
We are using VM MRP Type and weighted average model to calculate forecast value using historical consumption values. I have 36 historical periods(months) but have consumption incurred only in last period i-e "1". I have choosen a weighted group 01 (20% for 1-12 month, 30% for 13-24 month, 50% for 25-36 month). Using these setting it should calculate the basic value as 1*0.5/12 = .042 but it gives "1" as basic value not considering leading zero consumption value in historical time series. If i put a value in first period it calculates correctly and considers the leading zero.
We have implemented note 1113276, 1145764 & 1113277 and have chosen CV_OPTION="X" in the interface as per theses notes instructions but still while executing the forecast it is not considering the leading zeros.
We are using ECC 6.0 MM with 602 support pack.
Need urgent help in this regard.Have you followed the steps as per SAP Note 1113276 , Just check below link with same subject discussed check it helps you,
[Forecast with consumption zero are not considered |Forecast with consumption zero are not considered] -
How to add leading zeros to kunnr field
Hi All,
I need to add leading zeros to KUNNR field runtime.
i.e for some customer it is displaying '2001084606'
some customer's it si displaying '10434'.
I want add leading zeros when customer length is
not equal to ten '10'.
plz kind let me know this is urgent.
Regards
BhaskarHi there,,
Kunnr is using a dataelement with Char 10.
You can do in this fashion to resolve your issue.
len = strlen (itab-kunnr).
len is having the lenght of the customer number.
if len < 10..
while len < 10.
concatenate '0' itab-kunnr into temp_text.
add 1 to len.
endwhile.
endif.
now finally you can assign temp_text to your itab-kunnr.
hope this way you can resolve your issue.
if found helpful,, don't forget to reward points.
Thanks-
Rahul. -
Hi experts,
Please can anyone help me understand how to implement this BADI FIEB_CHANGE_BS_DATA step by step to append leading zeros,its kind of urgent.
Regardshi try this code.
data: STRL TYPE I VALUE 0.
STRL = STRLEN( input ).
data: in(10) type c.
in = input.
strl = 10 - strl.
Do strl TIMES.
CALL FUNCTION 'STRING_CONCATENATE'
EXPORTING
STRING1 = '0'
STRING2 = in
IMPORTING
STRING = in.
ENDDO.
output = in.
regards,
sohi. -
Command for remove zeros in sapscript
Hello:
I need to remove zeros of a variable in a sapscript,
TALGN = 0000427795776
and I need to remove the zeros so:
TALGN = 427795776
But sometimes will be 3, 4 or more zeros, is there a way to do it with a sapscript command? or this should be done in the program?
Best regards and thank you for your help.
MiriamHi Miriam,
In SAP Scripts , you have Layout Set Symbols which you can use for doing things like :-
Getting Offset - &SYMBOL+4&
Length - &SYMBOL(5)&
If symbol is initial ,output nothing - &SYMBOL(I)&
Suppress Leading zeroes - &SYMBOL(Z)&.
And many more such symbols.
Hence, you dunt need to write the code in your driving program and pass to the Script.
You can directly use these symbols in your script and get things done in simple manner.
Hope this helps...
Regards,
Samreen...
Maybe you are looking for
-
Filename in Save As dialog when saving PDF file
I have a web site serving up PDF files. Without going into details, the URLs of the PDFs are not just your basic URL but look simething like this: http://www.domain.com/WorkFlowApp/Clients/demo1/secure/Promo%20Cover%20Cool-MedH i.pdf?userId=55b64ad5-
-
A message came up on my desktop asking me to click on it and it warned me about my toolbars would no longer work. I believe I had just deleted Google Chrome. Now every time I want to go online I have to wait a minute or so before a message comes up a
-
I purchased a tv show, but Itunes says I don't have access privileges
I tunes has suddenly said I do not have enough access privileges. I have purchased items before without any hang up.
-
Why won't my Set Dynaminc Data Attributes timestamp my data
Using LabView 2011. Built a program that uses a DAQ Assistant to read some sensors. Output is a Dynamic Data Array. Using the Write to Measurement File Express vi to log the data. Set the X Value (time) Columns to One Column only. Result: I get the d
-
ORA-30926: unable to get a stable set of rows in the source table
When user are trying to open a form getting below error. com.retek.platform.exception.RetekUnknownSystemException:ORA-30926: unable to get a stable set of rows in the source tables Please advice Edited by: user13382934 on Jul 9, 2011 1:32 PM