Urgent !!! Need help in modifying routine in transformation?

Hi
I am using following routine in a transformation for Location number characteristic.
    data: lv_country type /BIC/PZCUSTOMER-country.
    select single country
      into lv_country
      from /BIC/PZCUSTOMER
      where /BIC/ZCUSTOMER = SOURCE_FIELDS-CUSTOMER and
            objvers = 'A'.
    if sy-subrc = 0.
      RESULT = lv_country.
    endif.
The modification is
a.       Currently the ZLOCNO is set to be the country of demand, This is what I need it to be:
   i.      IF   Company Code = 70, then set ZLOCNO = VS,
           ELSE    set ZLOCNO = ZLOCNO__0COUNTRY from the ZLOCNO characteristics. Use the county code from the existing routine for lookup.
Please help me out to write a routine for this

Hi,
In 7.0, global declaration of start routine will be in a specific place. Declare the variable under this part in the start routine.
$$ begin of global - insert your declaration only below this line -
... "insert your code here
$$ end of global - insert your declaration only before this line -
Vivek

Similar Messages

Need help in modifying mapping parameters of out the box mapping

Hi There,
I am a new bee to dac.
Need help in modifying mapping parameters of out the box mapping, which is invoked by DAC task.
We got a requirement to edit mapping parameter. When I go and see parameter under mappings tab in a mapping, I could not see any values in it.
But when I set any value, and validate it. It is successful.
Is it right way to do it?
What my concern is, When I initially go and see parameter values under maapings tab in a mapping, they are blank.
Where is it storing these values?
Thanks,
Rag

If you modify mapping then u have to create new task in dac and dac itself craete parameter file at run time. if you want to add more parameters then do it in dac system parameters tab.
Thanks
Jay.

Urgently need help with this

Hi!!
I urgently need help with this:
When I compile this in Flex Builder 3 it says: The element type 'mx:Application' must be terminated by the matching end-tag '</mx:Application>'.
but I have this end tag in my file, but when I try to switch from source view to desgin view it says, that: >/mx:Script> expected to terminate element at line 71, this is right at the end of the .mxml file. I have actionscript(.as) file for scripting data.
This is the mxml code to terminate apllication tag which I did as you can see:
MXML code:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" backgroundGradientAlphas="[1.0, 1.0]" backgroundGradientColors="[#007200, #000200]" width="1024" height="768" applicationComplete="popolni_vse()">
<mx:HTTPService id="bazaMME" url="lokalnabaza/baza_MME_svn.xml" showBusyCursor="true" resultFormat="e4x"/>
<mx:Script source="dajzaj.as"/>
<mx:states>
<mx:State name="Galerije">
    <mx:SetProperty target="{panel1}" name="title" value="Galerije MME"/>
    <mx:SetProperty target="{panel2}" name="title" value="opis slik"/>
    <mx:SetProperty target="{panel3}" name="title" value="Opis Galerije"/>
    <mx:AddChild relativeTo="{panel1}" position="lastChild">
    <mx:HorizontalList x="0" y="22" width="713.09863" height="157.39436" id="ListaslikGalerije"></mx:HorizontalList>
            </mx:AddChild>
            <mx:SetProperty target="{text1}" name="text" value="MME opisi galerij "/>
            <mx:AddChild relativeTo="{panel1}" position="lastChild">
                <mx:Label x="217" y="346" text="labela za test" id="izbr"/>
            </mx:AddChild>
            <mx:SetProperty target="{label1}" name="text" value="26. November 2009@08:06"/>
            <mx:SetProperty target="{label1}" name="x" value="845"/>
            <mx:SetProperty target="{label1}" name="width" value="169"/>
            <mx:SetProperty target="{Gale}" name="text" value="plac za Galerije"/>
        </mx:State>
        <mx:State name="Projekti"/>
    </mx:states>
<mx:MenuBar id="MMEMenu" labelField="@label" showRoot="true" fillAlphas="[1.0, 1.0]" fillColors="[#043D01, #000000]" color="#9EE499" x="8" y="24"
         itemClick="dajVsebino(event)" width="1006.1268" height="21.90141">
       <mx:XMLList id="MMEmenuModel">
             <menuitem label="O nas">
                 <menuitem label="reference podjetja" name="refMME" type="check" groupName="one"/>
                 <menuitem label="reference direktor" name="refdir" type="check" groupName="one"/>
              <menuitem label="Kontakt" name="podatMME" groupName="one" />
              <menuitem label="Kje smo" name="lokaMME" type="check" groupName="one" />
             </menuitem>
             <menuitem type="separator"/>
             <menuitem label="Galerija">
                 <menuitem label="Slovenija" name="galSvn" type="check" groupName="one"/>
                 <menuitem label="Nemčija" name="galDeu" type="check" groupName="one" />
             </menuitem>
             <menuitem type="separator"/>
             <menuitem label="projekti">
                 <menuitem label="Slovenija" name="projSvn" type="check" groupName="one"/>
                 <menuitem label="Nemčija" name="projDeu" type="check" groupName="one" />
                 <menuitem label="Madžarska" name="projHun" type="check" groupName="one"/>
             </menuitem>
         </mx:XMLList>
         </mx:MenuBar>
    <mx:Label x="845" y="10" text="25. November 2009@08:21" color="#FFFFFF" width="169" height="18.02817" id="label1"/>
    <mx:Label x="746" y="10" text="zadnja posodobitev:" color="#FFFFFF"/>
    <mx:Panel x="9" y="57" width="743.02814" height="688.4507" layout="absolute" title="Plac za Vsebino" id="panel1">
        <mx:Text x="0" y="-0.1" text="MME vsebina" width="722.95776" height="648.4507" id="Gale"/>
    </mx:Panel>
    <mx:Label x="197.25" y="748.45" color="#FFFFFF" text="Copyright © 2009 MME d.o.o." fontSize="12" width="228.73239" height="20"/>
    <mx:Label x="463.35" y="748.45" text="izdelava spletnih strani: FACTUM d.o.o." color="#FBFDFD" fontSize="12" width="287.60565" height="20"/>
    <mx:Panel x="759" y="53" width="250" height="705.07043" layout="absolute" title="Plac za hitre novice" id="panel3">
        <mx:Text x="0" y="0" text="MME novice" width="230" height="665.07043" id="text1"/>
        <mx:Panel x="-10" y="325.35" width="250" height="336.61972" layout="absolute" title="začasna panela" color="#000203" themeColor="#4BA247" cornerRadius="10" backgroundColor="#4B9539" id="panel2">
            <mx:Label x="145" y="53" text="vrednost" id="spremmen"/>
            <mx:Label x="125" y="78" text="Label"/>
            <mx:Label x="125" y="103" text="Label"/>
            <mx:Label x="0" y="53" text="spremenljivka iz Menuja:"/>
            <mx:Label x="45" y="78" text="Label"/>
            <mx:Label x="45" y="103" text="Label"/>
        </mx:Panel>
    </mx:Panel>
    <mx:Label x="9.9" y="10" text="plac za naslov MME vsebine" id="MMEnaslov" color="#040000"/>
     </mx:states></mx:Application>

I know it's been a while but… did you fix this?
It looks to me like you are terminating the <mx:Application> tag at the top. The opening tag should end like this: resultFormat="e4x">, not resultFormat="e4x"/> (Remove the /).
Carlos

Urgently need help for parsing IP header

Hi, could anyone tell which class I should use to parsing the IP header of a packet?
Thanks many many times!

> Hi, could anyone tell which class I should use to
parsing the IP header of a packet?
DatagramPacket?
> Urgently need help for parsing IP header
Don't flag your question as urgent, even if it is for you.
* We all answer questions here voluntarily, in our leisure time. We do that because doing so is fun for us, because we enjoy helping people and having interesting discussions. Guess what, it is much less fun if it gets stressful. So the last thing you want to do to get us to answer your question is to pass your stress over to us.
* People who are stressed and want a fast answer often don't even find the time to do the necessary research or to formulate their question in an easy to comprehend way. That's even less fun to work with. So you really don't want us to feel your stress. Instead you want to take your time to write a well formulated post that is fun to answer. The less likely it is for us to know that your question is urgent, the more likely you are to get a fast answer!
* The simple notion that you want your post to be answered faster than those of the other members might feel rather unfair to some of us. Doubly so because often "urgent" questions actually are homework questions. Yours might be different, but someone who had bad experiences with this type of question might not read far enough to notice.

Need help to modify a report written using Field-Groups Concept. - Part1

Hello ABAP Experts,
I need your help to modify the following report with following requirement as I have least knowledge
about the field-group concept. Thats is the reason, I am pasting the whole code. As it is part of our
production requirement. I really appreciate your help, If its sent modifying the code required.
Modification required in the report.
To allow the sales representatives to see billed shipments and open orders for the current month.
1) Selection Screen Changes:
u2022     Add selection by Sales group and Customer group
u2022     Add sort by:     3. Ship-to / Material
u2022     Add another selection box
[ ] Open Orders and Shipments with the current month
2)      For the new selection box, subtotal sales quantity and delivery quantity.
     If delivered, make the sales quantity zero in the subtotal
Current report displays, in Selection Screen
Sales org:
Person Name:
Material:
Plant:
Sales Office:
Ship to Name:
Ship to Number:
Sorts Report by : 1. Person Name 2. Material
Check Boxes : 1. Open Orders 2. Delayed Orders.
report zorder LINE-SIZE 170
                  LINE-COUNT 58
                  MESSAGE-ID zv
                  NO STANDARD PAGE HEADING.
TABLES:
cdhdr,                                 "Change Doc Header
cdpos,                                 "Change Doc Item
kna1,                                  "Customer master
likp,                                  "Delivery Header
lips,                                  "Delivery Item
*lips,                                 "Delivery Item
zvbpa_lfa1,                            "Vendor Master
makt,                                  "Material Desc
t001w,                                 "Plant
tvkbt,                                 "Sales Office
tvko,                                  "Sales Organizations
vbak,                                  "Sales Header
vbap,                                  "Sales Item
zvvbak,                                "Sales Hdr - Time calc
vbup,                                  "Item status
vbep,                                  "Sales Schedule Line
vbfa,                                  "Flow documents
vbpa,                                  "Partners
vbrk,                                  "Billing Header
vbrp.                                  "Billing Item
SELECT-OPTIONS:
s_vkorg FOR vbak-vkorg OBLIGATORY,
s_ernam FOR vbak-ernam,
s_matnr FOR vbap-matnr,
s_werks FOR vbap-werks,
s_vkbur FOR vbak-vkbur,
s_name1 FOR kna1-name1,
s_kunnr FOR kna1-kunnr.
SELECTION-SCREEN ULINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(49) text-c20.
PARAMETERS: p_sort TYPE n DEFAULT '1'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 19(40) text-022.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 19(40) text-023.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 19(40) text-024.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN COMMENT 19(40) text-070.
SELECTION-SCREEN ULINE.
SELECTION-SCREEN BEGIN OF BLOCK b20 WITH FRAME.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS:p_open AS CHECKBOX DEFAULT 'X'.
SELECTION-SCREEN COMMENT 5(48) text-072.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS:p_delay AS CHECKBOX DEFAULT 'X'.
SELECTION-SCREEN COMMENT 5(48) text-073.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK b20.
DATA:
vbeln(11),                             "Document number
cancel_dt TYPE d,                      "Cancellation Date
BEGIN OF tabkey,                       "Tabkey
mandant LIKE sy-mandt,
vbeln LIKE vbap-vbeln,
posnr LIKE vbap-posnr,
END OF tabkey,
name1_sp1 LIKE lfa1-name1,             "Sales Carrier Name
name1_sp2 LIKE lfa1-name1,             "Delivery Carrier Name
datum-1 TYPE d,                        "Current Dt Less 1
datum-14 TYPE d,                       "Current Dt Less 14
datum-90 TYPE d,                       "Current Dt Less 90
rpt_hdr1(170),                         "Report Header 1
rpt_hdr2(170),                         "Report Header 2
rpt_hdr3(170),                         "Report Header 3
cb_hdr1(170),                          "Control Break Header 1
line_pos1 TYPE i,                      "Line Print Position HDR1
line_pos2 TYPE i,                      "Line Print Position HDR2
line_pos3 TYPE i,                      "Line Print Position DET2
status,                                "Order Status
open,                                  "Open Order
delayed VALUE 'D',                     "Delayed Order
v_comp(30).                            "Company Text Field
DATA: v_flagh2. " Flag for header 2 & 3
DATA: ls_comwa LIKE vbco6. "Structure for flow information
DATA: t_vbfa_tab TYPE STANDARD TABLE OF vbfa WITH HEADER LINE."Itab
for flow information
data: g_trans_id type vttk-tdlnr. "get transport id from flow
information
data v_sales_org_cpimex type vkorg value '3300'.
FIELD-GROUPS:
header,
order.
INSERT
status                                 "Status
vbak-vkbur                             "Sales Office
vbak-ernam                             "Created By
kna1-kunnr                             "Customer
kna1-name1                             "Customer Name
vbap-matnr                             "Material
vbap-werks                             "Plant
vbep-lddat                             "Load Dt
vbap-vbeln                             "Sales Document
INTO header.
INSERT
kna1-ort01                             "City
kna1-regio                             "Region
likp-traid                             "Transport ID
lips-vbeln                             "Delivery Document
lips-ntgew                             "Net Wt
lips-gewei                             "Unit of Weight
vbap-kwmeng                            "Order Qty
vbap-vrkme                             "Sales Unit
vbak-bstnk                             "Customer PO
vbak-erdat                             "Sales Create Dt
vbak-ihrez                             "PO Release
vbak-vdatu                            "Req Delivery Dt
vbak-vzeit                            "Req Delivery Time
vbfa-vbeln                             "Goods issue doc
vbrk-vbeln                             "Billing Document
name1_sp1                              "Sales Carrier
name1_sp2                              "Delivery Carrier
INTO order.
INITIALIZATION.
AT SELECTION-SCREEN.
IF NOT p_sort BETWEEN 1 AND 2.
    MESSAGE e022 WITH p_sort.
ENDIF.
* Report 1 or more of cancelled, delayed or open
IF p_open IS INITIAL AND
     p_delay IS INITIAL.
    MESSAGE e023.
ENDIF.
START-OF-SELECTION.
* Load Company Name
WRITE 'XYZ INC'(000) TO v_comp.
* Calculate Date Range
datum-1 = sy-datum - 1.
datum-14 = sy-datum - 14.
datum-90 = sy-datum - 90.
* Compose Parameter Header
PERFORM parm_hdr.
** Compose Report Header
v_flagh2 = 1.
PERFORM data_selection.
END-OF-SELECTION.
* Determine Sort
CASE p_sort.
    WHEN 1.
      SORT BY status vbak-ernam kna1-name1 kna1-kunnr
              vbep-lddat vbap-vbeln.
    WHEN 2.
      SORT BY status vbap-matnr vbap-werks vbep-lddat
              vbap-vbeln.
ENDCASE.
LOOP.
    AT NEW status.
      CASE status.
        WHEN delayed.
          WRITE 'Delayed Orders'(061) TO rpt_hdr1.
        WHEN OTHERS.
          WRITE 'Open Orders'(062) TO rpt_hdr1.
      ENDCASE.
      NEW-PAGE.
    ENDAT.
    AT NEW vbak-ernam.
      IF p_sort = 1.
        CLEAR cb_hdr1.
        WRITE 'CAA:'(064) TO cb_hdr1.
        WRITE vbak-ernam TO cb_hdr1+5.
        NEW-PAGE.
      ENDIF.
    ENDAT.
    AT NEW vbap-matnr.
      IF p_sort = 2.
        CLEAR makt.
        SELECT SINGLE * FROM makt
            WHERE spras = sy-langu AND
                  matnr = vbap-matnr.
        CLEAR cb_hdr1.
        WRITE 'Material:'(042) TO cb_hdr1.
        WRITE vbap-matnr TO cb_hdr1+10.
        WRITE makt-maktx TO cb_hdr1+21.
        NEW-PAGE.
      ENDIF.
    ENDAT.
    AT NEW vbap-werks.
      AT order.
        RESERVE 3 LINES.
        SKIP 1.
        NEW-LINE.
* Indicate new open item
        WRITE vbap-vbeln TO vbeln.
* Find Transport ID
* Fill the structure LS_COMWA
        ls_comwa-mandt = sy-mandt.
        ls_comwa-vbeln = vbap-vbeln.
        CALL FUNCTION 'RV_ORDER_FLOW_INFORMATION'
          EXPORTING
            comwa    = ls_comwa
          TABLES
            vbfa_tab = t_vbfa_tab.
        IF sy-subrc EQ 0.
          READ TABLE t_vbfa_tab WITH KEY vbtyp_n = '8'.
          IF sy-subrc EQ 0.
            SELECT SINGLE tdlnr INTO g_trans_id
              FROM vttk WHERE tknum = t_vbfa_tab-vbeln.
            CONDENSE g_trans_id.
          ENDIF.
        ENDIF.
        IF vbak-erdat >= datum-1.
          vbeln+10 = 'N'.
        ENDIF.
        CASE p_sort.
          WHEN 1.
            WRITE 1 vbak-vkbur.
            WRITE 8 kna1-name1.
            WRITE 44 vbeln.
            WRITE 56 vbap-matnr.
            WRITE:
                75 vbap-kwmeng LEFT-JUSTIFIED,
                 vbap-vrkme,
                100 vbak-bstnk,
                 vbak-ihrez,
                134 vbak-vdatu,
                    vbak-vzeit,
                154 vbep-lddat.
            WRITE 166 vbap-werks.
            NEW-LINE.
            WRITE:
              5 kna1-ort01,
              41 kna1-regio.
            IF name1_sp2 IS INITIAL.
              WRITE:
                45 name1_sp1,
            ELSE.
              WRITE 45 name1_sp2.
              IF name1_sp1 = name1_sp2.
                WRITE ' '.
              ELSE.
                WRITE '*'.
              ENDIF.
            ENDIF.
            IF vbak-vkorg = v_sales_org_cpimex .
              WRITE 81 g_trans_id.
            ELSE.
              WRITE 81 likp-traid.
            ENDIF.
            WRITE:
              102 lips-vbeln,
              115 lips-ntgew NO-ZERO LEFT-JUSTIFIED,
                  lips-gewei,
              140 vbfa-vbeln,
              152 vbrk-vbeln.
          WHEN 2.
            WRITE 1 vbak-ernam.
            WRITE 14 vbak-vkbur.
            WRITE 21 kna1-name1.
            WRITE 57 vbeln.
            WRITE:
                69 vbap-kwmeng LEFT-JUSTIFIED,
                    vbap-vrkme,
                92 vbak-bstnk,
                    vbak-ihrez,
                126 vbak-vdatu,
                  vbak-vzeit,
                146 vbep-lddat.
            WRITE 162 vbap-werks.
            NEW-LINE.
            WRITE:
              5 kna1-ort01,
              41 kna1-regio.
            IF name1_sp2 IS INITIAL.
              WRITE:
                45 name1_sp1,
            ELSE.
              WRITE 45 name1_sp2.
              IF name1_sp1 = name1_sp2.
                WRITE ' '.
              ELSE.
                WRITE '*'.
              ENDIF.
            ENDIF.
            IF vbak-vkorg = v_sales_org_cpimex .
              WRITE 81 g_trans_id.
            ELSE.
              WRITE 81 likp-traid.
            ENDIF.
            WRITE:
               102 lips-vbeln,
               115 lips-ntgew NO-ZERO LEFT-JUSTIFIED,
                   lips-gewei,
               140 vbfa-vbeln,
               152 vbrk-vbeln.
        ENDCASE.
      ENDAT.
    ENDLOOP.
*       FORM PARM_HDR                                                 *
FORM parm_hdr.
WRITE 'Program selections'(101) TO rpt_hdr1.
WRITE 'Sign'(102) TO rpt_hdr1+29.
WRITE 'Option'(103) TO rpt_hdr1+34.
WRITE 'From'(104) TO rpt_hdr1+41.
WRITE 'To'(105) TO rpt_hdr1+77.
ENDFORM.                    "PARM_HDR
*       FORM RPT_HDR                                                  *
FORM rpt_hdr.
CASE p_sort.
    WHEN 1.               "When sort by CAA
      WRITE 1'SOff'(066).
      WRITE 8'Customer'(009).
      WRITE 44'Sales Doc'(010).
      WRITE 56'Material'(031).
      WRITE 75'Sales Qty'(011).
      WRITE 100'Customer PO'(012).
      WRITE 134'Req.Del.Dt & Tm'(014).
      WRITE 154'Load Dt'(015).
      WRITE 166'Plnt'(016).
      NEW-LINE.
      WRITE 5'City'(017).
      WRITE 41'Reg'(069).
      WRITE 45'Carrier'(018).
      WRITE 81'Transport ID'(019).
      WRITE 102'Dlvry Doc'(021).
      WRITE 115'Dlvry Qty'(025).
      WRITE 140'PGI Doc'(026).
      WRITE 152'Billng Doc'(027).
    WHEN 2.               "When sort by Material
      WRITE 1'Created By'(008).
      WRITE 14'SOff'(066).
      WRITE 21'Customer'(009).
      WRITE 57'Sales Doc'(010).
      WRITE 69'Sales Qty'(011).
      WRITE 92'Customer PO'(012).
      WRITE 126'Req.Del.Dt & Tm'(014).
      WRITE 146'Load Dt'(015).
      WRITE 162'Plnt'(016).
      NEW-LINE.
      WRITE 5'City'(017).
      WRITE 41'Reg'(069).
      WRITE 45'Carrier'(018).
      WRITE 81'Transport ID'(019).
      WRITE 102'Dlvry Doc'(021).
      WRITE 115'Dlvry Qty'(025).
      WRITE 140'PGI Doc'(026).
      WRITE 152'Billng Doc'(027).
ENDCASE.
ENDFORM.                    "RPT_HDR
INCLUDE zrpthdri.
WRITE:
/ rpt_hdr1.
ULINE.
IF v_flagh2 <> 0.
PERFORM rpt_hdr. "Write secondary header
ULINE.
* Control Break Header
WRITE / cb_hdr1.
ENDIF.
Continued in Part-2
Thanks a ton in advance.
Mythili Sharma
Edited by: Mythili sharma on Mar 30, 2009 3:32 AM
Edited by: Rob Burbank on Mar 30, 2009 10:46 AM

Hello ABAP Experts,
I need your help to modify the following report with following requirement as I have least knowledge about the field-group concept. Thats is the reason, I am pasting the whole code. As it is part of our production requirement. I really appreciate your help, If its sent modifying the code required.
Modification required in the report.
To allow the sales representatives to see billed shipments and open orders for the current month.
1) Selection Screen Changes:
u2022     Add selection by Sales group and Customer group
u2022     Add sort by:     5. Ship-to / Material
u2022     Add another selection box
[ ] Open Orders and Shipments with the current month
2)      For the new selection box, subtotal sales quantity and delivery quantity.
     If delivered, make the sales quantity zero in the subtotal
Current report displays, in Selection Screen
Sales org:
Person Name:
Material:
Plant:
Sales Office:
Ship to Name:
Ship to Number:
Sorts Report by :
1. Person Name
2. Material
3. Plant
4. Sales Office
Check Boxes :
1. Open Orders
2. Delayed Orders
3.Cancelled Orders
PLEASE DOWNLOAD THE COMPLETE REPORT FROM THE FOLLOWING LINK
<< Link removed >>
It would be a great help, If the program is modified according to the requirement and snd it back through send space and send link, even if u send the necessary changes to be done in the report is also appreciable.
Thanks a ton in adanvce
Mythili
I wanted to close this thread as I could not put my question in a proper format. So please reply in the new thread which is posted.
Edited by: Mythili sharma on Mar 30, 2009 2:16 PM
Edited by: Rob Burbank on Mar 30, 2009 4:24 PM

I need help to modify my AS script

I have the following script and I would like to modify it:
1.On this file I need to type the name of some video Albums in order to be displayed in the SWF file.
2. What I wanr is that this file read the specific folder and read the directories which they will be the names of the Albums
How can I do this?
One more thing is that this file was created to work with Flas CS3 and I am trying to test it with CS5.
I really appreciate the whole help I can get.
I don't know anything about AS2 nor AS3, I only know hoe to modify the files by following comments and other samples from all around the web.
Thanks and I hope someone can help me, I've been trying few thing but I just stuck. So I really need help.
// Set the path to the External Parameters file relative to the *.swf file.
// If this file cannot be found or if it contains errors, the
// Internal Parameters(the parameters below) will be used.
//var ParametersFile = "MyControls.xml";
var ParametersFile = "XML_Files/MyControls.xml";
// Set the path to the Theme file relative to the *.swf file.
// If this file cannot be found or if it contains errors, the
// Default Grey skin will be used instead.
// To learn how to edit Themes, please refer to the 'Help' folder.
// next line commented by SAMY
//var ThemeFile = "Theme.xml";
// NEXT LINE ADDED BY SAMY
var ThemeFile = "FLASH_DIR/3D_GALLERY/BlueTheme.xml";
// To learn more about how to add albums, please refer to the
// 'Help' folder. This line says that replace and modify the name of the title album and the xml file which is as shown here
var AlbumLabel_1 = "Pastor Alejandro Bullon";//<-- This is the typical line that I want to be input from the external folder name *
//var AlbumDataFile_1 = "Videos/Alejandro_B/Alejandro_Bullon.xml";
// next line for website configuration typical
//var AlbumDataFile_1 = "Media/Media.xml";
//next line works fine locally
//var AlbumDataFile_1 = "Videos/Videos_website.xml";
var AlbumDataFile_1 = "FLASH_DIR/3D_GALLERY/Videos/Alejandro_B/Alejandro_B.xml";
var AlbumLabel_2 = "Pastor Stephen Bohr";// <-- *
// next line commented by samy
var AlbumDataFile_2 = "FLASH_DIR/3D_GALLERY/Videos/Stephen_B/Stephen_Bohr.xml";
// next line added by samy for website configuration typical for all albums
//var AlbumDataFile_2 = "Videos/Videos.xml";
var AlbumLabel_3 = "Pastor Caleb Jara";
var AlbumDataFile_3 = "FLASH_DIR/3D_GALLERY/Videos/Caleb_Jara/Caleb_Jara.xml";
//var AlbumDataFile_3 = "City/City.xml";
var AlbumLabel_4 = "Pastor Doug_Batchellor";
var AlbumDataFile_4 = "FLASH_DIR/3D_GALLERY/Videos/Doug_B/Doug_Batchellor.xml";
//var AlbumDataFile_4 = "FLASH_DIR/3D_GALLERY/City/City.xml";
var AlbumLabel_5 = "Musica";
var AlbumDataFile_5 = "FLASH_DIR/3D_GALLERY/Musica/Musica.xml";
//var AlbumDataFile_5 = "Landscape/Landscape.xml";
var AlbumLabel_6 = "Powerpoint";
var AlbumDataFile_6 = "FLASH_DIR/3D_GALLERY/Powerpoint/Powerpoint.xml";
var AlbumLabel_7 = "Escuela Sabatica '10";
var AlbumDataFile_7 = "FLASH_DIR/3D_GALLERY/Escuela_Sab/Esc_Sab_2010.xml";
var AlbumLabel_8 = "Escuela Sabatica '11";
var AlbumDataFile_8 = "FLASH_DIR/3D_GALLERY/Escuela_Sab/Esc_Sab_2011.xml";
var AlbumLabel_9 = "Test Nature";
var AlbumDataFile_9 = "Nature/Nature.xml";
// Select wether to enable or disable error messages created
// due to 'file not found' , 'format not supported' or 'corrupted
// XML files' type of errors.
// Note: There error messages are automatically disabled when you
// export your *.swf file.
var EnableErrorMessages = "yes";//[Yes , No]
// Set parameters for items.
var ItemWidth = 170;
var ItemHeight= 130;
var ShowItemNumber = "yes";
//var ShowItemNumber = "no";
// Select fitting technique , stretch the thumb picture to fit the item
// or crop it from the top left.
var ThumbFittingMethod = "stretch";
// Select what to do when the file preview is clicked, either to enlarge
// the preview or navigate to the URL provided for the current item in
// the XML data file of the current album
var WhenPreviewIsClicked = "Enlarge";//[Enlarge , GetUrl]
// Select the window target, '_blank' to open a new window or '_self' to
// navigate to the URL in the same window
var WindowTarget = "_blank";
// Select wether to show the information of the item or not
var ShowItemInfo = "yes";
// Select wether to show the albums menu or not
var ShowAlbumsMenu = "yes";
// Select wether to show the video controller or not
var ShowVideoController = "yes";
// Select wether to show the autoplay option or not
//var ShowAutoplayButton="no";
var ShowAutoplayButton="yes";
// Set the delay time for autoplay, this will be used for pictures only
var AutoplayDelayTime = 5;
// Set the spinning speed of a single wheel
//var WheelSpinningSpeed = 5;
var WheelSpinningSpeed = 2;
// Select direction of scrolling of pages
var DefaultDirection = "LeftToRight";
// Select wether you want to disable one of the wheels
var DisableWheel = "none";
// Set the maximum number of items to be loaded on a single wheel
var MaximumLoadOnEachWheel = 10;
// Select how you want the wheel to interact with the mouse
// Refer to the 'Help' folder for more information.
var ScrollingStyle = "2";
// Select wether to enable tool tips or not.
var EnableToolTips = "yes";
// Set the delay time for the tool tips to appear
var ToolTipsDelayTime = 1;
// This is like a shortcut, set this parameter to 'Name' to display
// the name of the item as a tool tip.......
var ToolTipsContent = "tooltips";//[ToolTips , Name , FileType]
// Select wether to enable or disable visual effects.
var EnableDepthOfField = "yes";
var EnableMotionBlur = "yes";
Message was edited by: samy4movies

This is a web-based app. And the application is for a carrousel video gallery.
I already figure out the auto XML generator with php, but I think I want to get all in one process. Meaning that I only want to upload my videos and run php codes by themselves and not to worry in adding or modifying the *.fla file everytime that I insert a new folder ("Album").
This is the link for the project I am working
http://anaheimspanish.net/index.php?option=com_content&view=article&id=98&Itemid=124
It's called 3D Video Gallery, I bought the component through a website for flash components, but their support is not very good, that's why I want to fix as much as I need.
Thanks in advance for your help
If you need a full zip project to test it, let me know.

Need help with modifying IDS Sensor in WLC; Null Probe Response problem.

I need help in figuring out how to handle a NULL Probe Response report we are getting from our WCS.
We are getting the following alert from our WCS:
1. Message: IDS 'NULL probe resp 2' Signature attack cleared on AP 'XXXAP_#2' protocol '802.11b/g' on Controller '161.201.97.8'. The Signature description is 'NULL Probe Response - No SSID element'. - Controller Name: XXX-XXXX-XX
And
1. Message: IDS 'NULL probe resp 2' Signature attack detected on AP 'XXXAP#2' protocol '802.11b/g' on Controller '161.201.97.8'. The Signature description is 'NULL Probe Response - No SSID element', with precedence '3'. The attacker's mac address is 'ac:86:74:1e:15:5f', channel number is '5', and the number of detections is '1'. - Controller Name: XXX-XXXX-XX.
Is this something to be concerned with in terms of a potential attack, or should I ignore these types of emails?
According to a previous post here: https://supportforums.cisco.com/discussion/10731846/wireless-system-has-detected-possible-intrusion-attack-signature I need to modify my IDS Signature folder in the WLC. I have no idea how to modify the file itself into the format needed to prevent these intrusions. Could somebody please help me correctly enter the right format needed for this file, or correct me in my thinking. I assume I'm in the right direction but if anyone has further information that could be helpful it would be greatly appreciated. Thanks in advance.

The IDS signatures are stored in a file called wlc-sig_std.sig. That file can be edited via GUI by navigating to Security > Wireless Protection Policy > Standard Signatures. The links that you shared contain links to Cisco documentation that leave out the important parts of the documentation. The only way to get that documentation is to pull the existing signatures from the WLC using Commands > Upload File. Read that file for details on the syntax, then adjust your values in the GUI. I've attached a text document with the standard signature file.

Error 1057 URGENT Need Help

Hi my friends and Labview Application Engineers,
I need help urgently.
I need to map my table control into a multicolumn listbox.
However, I get Error 1057 as shown in attached photo.
How should I get rid of the error? Thank you very much!
Attachments:
Error Msg.jpg ‏84 KB

-You want to get more views??? I think if your post is important and valid automatically many will view the post and try to help. But if you simply post the same thing 2 times doesn't mean you get more views.
-Coming to solve problem can elaborate your problem little more and post your vi if possible in LV12.
Thanks
Thanks
uday,
Please Mark the solution as accepted if your problem is solved and help author by clicking on kudoes
Certified LabVIEW Associate Developer (CLAD) Using LV13

On my MacBook Pro I forgot my user password and I didn't enable Apple ID recoveries and I urgently need help finding a way to recover the password.

I urgently require help in recovering my user password for my MacBook Pro on OS X Lion, I forgot my password and Apple ID recoveries aren't enabled and I can't enable them as I don't know my password and my hint didn't help me at all, I really, really need help!

Also, a solution may be found if you search in the "More Like This" section over in the right column.Solution may be found if you search in the "More Like This" section over in the right column.

Need help with transfer routine.

I am doing this enhancement in BW 3.5 version.
There is an object in ODS - > ZPATHNM (Pathname)
It gets data from ZPTDIR object.
Now, 0MATERIAL infoobject has text data. For PATH type materials it has descriptions like pt/dat/fafg.2.0 , pt/dat/ovg.2c ... so on.
The content after pt/dat/ for example fafq.2.0, ovg.2c is available in ODS object ZPATHNM (Pathname)
Since I have to extract PATH material numbers. So I created another object ZPATHMAT and mapping it to ZPTDIR.
I have to write a transfer routine when the 0MATERIAL text description had description beginning with pt/dat/ and the text after pt/dat/ is equal to data in ZPATHNM. i should get material number in ZPATHMAT.
This is the transfer routine, I have written between ZPATHMAT and ZPTDIR . This is working fine.
Data : ZDIRNAM type String,
            ZCONT1 type string,
            ZCONT2 type string,
            ZMATERIAL(18) type C.
ZDIRNAM = TRAN_STRUCTURE-ZPTDIR.
IF ZDIRNAM is not Initial.
Concatenate 'pt/dat/' ZDIRNAM into ZCONT1.
Select single MATERIAL
    into ZMATERIAL from /BI0/TMATERIAL
where TXTMD = ZCONT1.
RESULT = ZMATERIAL.
ENDIF.
Now there is another requirement, where I have to create one more object, ZPATHDES. This object should get Material description for path type materials from 0PROD_HIER text table.
This object, 0PROD_HIER is an attribute of 0MATERIAL.
So the logic to get the material description into ZPATHDES, is when the material number in 0MATERIAL is equal to material number in ZPATHMAT (generated from above routine), I should get description (TXTMD) from text table of 0PROD_HIER (/BI0/TPROD_HIER) into this ZPATHDES object.
I able not to connect this logic in the code and it is throwing errors.
I need help in coding.
Thanks.

Very hard to understand the logic in a thread. Can you please write your code, which is throwing errors? May be that will help us.
Regards
amandeep sharma

[Urgent] Need help calculating difference between two dates

I'm trying to write a code to display the current day and time, then accept two dates from the user and display the difference between the two dates. To display the current date and time, I've used the SimpleDateFormatter library but I'm having difficulty calculating the difference between two dates. Could someone please help me with this?
Below is my code so far
import java.util.Date;
import java.util.Scanner;
import java.text.SimpleDateFormat;
public class DateFormatter {
     public void displayNow()
          Date todaysDate = new Date();
          SimpleDateFormat formatter = new SimpleDateFormat("yyyy-MMM-dd HH:mm:ss");
          String formattedDate = formatter.format(todaysDate);
          System.out.println("Today's date and time is: "+formattedDate);
     public void calculateDifference(Date startDate, Date endDate)
          /* This is whre i need help! */
     public static void main(String[] args)
          DateFormatter df = new DateFormatter();
          Scanner sc = new Scanner(System.in);
          df.displayNow();
          System.out.println("Please enter a date: ");
          String date1 = sc.next();
          System.out.println("Please enter another date: ");
          String date2 = sc.next();
}The methods displayNow() and calculateDifference(Date startDate, Date endDate) are essential and cannot be skipped out.

tarahmarie101 wrote:
Dude. I've tried doing assignments under pressure, and it doesn't work. Here's a piece of free advice. Start earlier next time, don't put "urgent" in the title of your post b/c it just pisses people off around here--and is a sure sign of an overdue homework assignment which no one around here likes helping with, and try to ask intelligent questions--don't just say "Help me!"
Of course, it takes some time to learn what the intelligent questions are. You have my sympathy. Try asking questions about how to do a particular task, instead of asking people to tell you what to do. It starts to get easier after a while.
actually dude i started on this on monday.. but there were so many other stuff to do along with this.. and i did try referring up the Calendar utility but it was a bit confusing actually.. it was only after that did i come to this forum.. nor am i very good at Java.. anyhoo thanks for your sympathies :P

URGENT: Need help reading URL of current page

Hello kind people!
I need help, and its very simple:
How do i read the URL of a web page?
For example, the URL of this page is:
http://forums.sun.com/thread.jspa?threadID=5327796
So how can i be able to read in this URL in my java program?
thanks SO MUCH
P.S. I HAVE searched the java docs and everything, the closest thing i found was request.getRequestURL().? but i have no idea how to use it. you have NO IDEA how appreciative i would be if you could simply show me exactly how to read in the URL of a given page.
thanks SO MUCH
Edited by: homegrownpeas on Aug 31, 2008 5:19 PM

Going by what I understand here is a simple version of how you can read data from over HTTP.
This expects the "page" to be text (hence an InputStreamReader instead of an InputStream.)
import java.io.BufferedReader;
import java.io.IOException;
import java.io.InputStreamReader;
import java.io.OutputStreamWriter;
import java.net.HttpURLConnection;
import java.net.URL;
import java.net.URLConnection;
import java.util.HashMap;
* GPLv2.
* @author karlm816
public class HomeGrownPeas {
      * @param args
     public static void main(String[] args) {
          HashMap<String, String> params = new HashMap<String, String>();
          params.put("threadID", "5327796");
          System.out.println(loadHttpPage("http://forums.sun.com/thread.jspa", params));
     public static String loadHttpPage(String sUrl, HashMap<String, String> params) {
          // Build the HTTP request string
          StringBuilder sb = new StringBuilder();
          if (params != null) {
               for (String key : params.keySet()) {
                    if (sb.length() > 0) {
                         sb.append("&");
                    sb.append(key);
                    sb.append("=");
                    sb.append(params.get(key));
          System.out.println("params: " + sb.toString());
          try {
               URL url = new URL(sUrl);
               URLConnection connection = url.openConnection();
               connection.setDoOutput(true);
               connection.setRequestProperty("Content-Length", "" + sb.length());
               connection.setUseCaches(false);
               if (connection instanceof HttpURLConnection) {
                    HttpURLConnection conn = (HttpURLConnection) connection;
                    conn.setRequestMethod("POST");
               OutputStreamWriter osw = new OutputStreamWriter(connection.getOutputStream());
               osw.write(sb.toString());
               osw.close();
               // Now use sb to hold the resutls from the request
               sb = new StringBuilder();
               BufferedReader in = new BufferedReader(
                     new InputStreamReader(
                     connection.getInputStream()));
               String s;
               while ((s = in.readLine()) != null) {
                    sb.append(s);
                    // To make it more "human readable"
                    sb.append("\n");
               in.close();
         } catch (IOException e) {
              e.printStackTrace();
              return null;
        return sb.toString();
}

Urgent : Need help in parsing XML from Sharepoint and save it into DB

Hi ,
I am Sharepoint guy and a newbie in Oracle . PL/SQL
I am using UTL_DBWS Package to call a Sharepoint WebService " and was sucessfull , Now the xml has to be parsed and stored into a Table. I am facing the issue as the XML has a different namesoace and normal XPATH query is not working
Below is the XML and need help in parsing it
declare
responsexml sys.XMLTYPE;
testparsexml sys.XMLTYPE;
begin
responsexml := sys.XMLTYPE('<GetListItemsResponse xmlns="http://schemas.microsoft.com/sharepoint/soap/">
<GetListItemsResult>
<listitems xmlns:s="uuid:BDC6E3F0-6DA3-11d1-A2A3-00AA00C14882" xmlns:dt="uuid:C2F41010-65B3-11d1-A29F-00AA00C14882" xmlns:rs="urn:schemas-microsoft-com:rowset" xmlns:z="#RowsetSchema">
<rs:data ItemCount="2">
<z:row ows_MetaInfo="1;#" ows__ModerationStatus="0" ows__Level="1" ows_Title="Test Title 1" ows_ID="1" ows_owshiddenversion="1" ows_UniqueId="1;#{9C45D54E-150E-4509-B59A-DB5A1B97E034}" ows_FSObjType="1;#0" ows_Created="2009-09-12 17:13:16" ows_FileRef="1;#Lists/Tasks/1_.000"/>
<z:row ows_MetaInfo="2;#" ows__ModerationStatus="0" ows__Level="1" ows_Title="Testing Tasks" ows_ID="2" ows_owshiddenversion="1" ows_UniqueId="2;#{8942E211-460B-422A-B1AD-1347F062114A}" ows_FSObjType="2;#0" ows_Created="2010-02-14 16:44:40" ows_FileRef="2;#Lists/Tasks/2_.000"/>
</rs:data>
</listitems>
</GetListItemsResult>
</GetListItemsResponse>');
testparsexml := responsexml.extract('/GetListItemsResponse/GetListItemsResult/listitems/rs:data/z:row/@ows_Title');
DBMS_OUTPUT.PUT_LINE(testparsexml.extract('/').getstringval());
end;
The issue is with rs:data , z:row nodes.... please suggest how to handle these kind of namespaces in Oracle
I need the parse the attribute "ows_Title" and save it into a DB
this script would generate "Error occured in XML Parsing"
Help is appriciated, thanks for looking

SQL> SELECT *
FROM XMLTABLE (
          xmlnamespaces ('http://schemas.microsoft.com/sharepoint/soap/' as "soap",
                         '#RowsetSchema' AS "z"
          'for $i in //soap:*//z:row return $i'
          PASSING xmltype (
                     '<GetListItemsResponse xmlns="http://schemas.microsoft.com/sharepoint/soap/">
<GetListItemsResult>
<listitems xmlns:s="uuid:BDC6E3F0-6DA3-11d1-A2A3-00AA00C14882" xmlns:dt="uuid:C2F41010-65B3-11d1-A29F-00AA00C14882" xmlns:rs="urn:schemas-microsoft-com:rowset" xmlns:z="#RowsetSchema">
<rs:data ItemCount="2">
<z:row ows_MetaInfo="1;#" ows__ModerationStatus="0" ows__Level="1" ows_Title="Test Title 1" ows_ID="1" ows_owshiddenversion="1" ows_UniqueId="1;#{9C45D54E-150E-4509-B59A-DB5A1B97E034}" ows_FSObjType="1;#0" ows_Created="2009-09-12 17:13:16" ows_FileRef="1;#Lists/Tasks/1_.000"/>
<z:row ows_MetaInfo="2;#" ows__ModerationStatus="0" ows__Level="1" ows_Title="Testing Tasks" ows_ID="2" ows_owshiddenversion="1" ows_UniqueId="2;#{8942E211-460B-422A-B1AD-1347F062114A}" ows_FSObjType="2;#0" ows_Created="2010-02-14 16:44:40" ows_FileRef="2;#Lists/Tasks/2_.000"/>
</rs:data>
</listitems>
</GetListItemsResult>
</GetListItemsResponse>')
columns ows_MetaInfo varchar2(20) path '@ows_MetaInfo',
         ows_Title varchar2(20) path '@ows_Title',
         ows__ModerationStatus varchar2(20) path '@ows__ModerationStatus'
OWS_METAINFO         OWS_TITLE            OWS__MODERATIONSTATUS
1;#                  Test Title 1         0
2;#                  Testing Tasks        0
2 rows selected.

Error while transporting transformations and datasource Urgent need Help

Hi all,
I have been working on this problem for a few days now. I created an ODS object, transformations, DTP and I am using a R/3 datasource for extraction. The ODS populates fine in the Dev box, the tranformations and the datasource are fine only in the Dev box. I tried to tranport the objects to the QA box from the Dev Box. Only the ODS transports properly. The transformations are not transported at all. Here is the error I get:
Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)
No rule exists
Rule 1 of transformation   () is not valid and is being deleted
Rule 2 of transformation   () is not valid and is being deleted
Error occurred during post-handling RS_After_import for TRFN L
Ended with return code : ==> 8 <===
Please do let me know what could be the problem. Please do respond ASAP......
if you experienced this issue please let me know how you solved it or a possible work around. any help will be greatly appreciated....
So far we have been using only 3.5 objects. This is the first 7.0 (end to End) transport.

Hi voodi,
I just followed the exact sequence that you mentioned. I transported the
DataSource first....then ODS(write optimized)....then transformations....then Dtp & infopackage.
data source ... no errors
2) ODS ..... no errors
3) Transformations .... Error....same as mentioned in my earlier post....
4) DTP and Infopackage ....Error similar to whats mentioned ...and it says that transformation does not exist.
Could it be an issue with Source System Translation ..... I dont know much about it .....could you please tell me what it could be and how to resolve it.   I am thinking in these lines because the source system in QA3 exists in the Data Souces Folder and it has translated properly to QA3Client300. But under the Infoproviders folder (in Q03)...under my DSO the data source still shows Dev3Client 200(client not changed). If this is the issue do you think I need to talk to Basis support for asking them to modify the transport(internally)......can it be done....
please do give me your feedback....thank you.

Need help to write Routine

Hi Gurus,
I need your urgent help on one requirement. I have to write a routine and the requirement is to bring data for K.F. "B" via comparing Materials between 0Material and 0MAT_UNITS.
0Material is already present in my flow and being loaded from DSO1 to DSO2 but 0MAT_UNITS not present. So I have to use a look-up on it using Materials from 0Material.
Materials has to be taken from 0Material and using condition as Observer-A(active) have to match with the materials of 0MAT_UNITS. If the material is present in 0MAT_UNITS with observer 'A' then take the Denominator and Numerator value for that material and produce a conversion factor for that material i.e. (Denominator/Numerator).
Now this factor need to be multiply with a K.F. "A" (already present in my DSO1) and assign the value to K.F. "B" as output (DSO2).
So pls guide me how should I code it in routine and which type of routine should I prefer.
Any effective help will be highly appreciated!!!!

Dear Ravi,
Thanks for the promt response.
Actually no as such user exit is found for this requirement.
U know in the transaction VOFM we can create formula for example in my case for condition value..this is achieved by routine(some form in the include program) and then the routine number can be assigned in the configuration setting for the particular transaction. This is what info so far I have searched..but how to crete the routine and all.still i'm searching. Hope I gave you some ground abt the prob??
So if any body have ever come across this requirement..please suggest.
Thanks.
Anup.

Urgent !!! Need help in modifying routine in transformation?

Similar Messages

Maybe you are looking for