URGENT - need help with ansi/iso outer joins

Hi,
I am currently preparing for the OCP sql exam for the 9i developer track and I think a statement is printed wrong in my study book, please could somebody confirm the following:-
Oracle Outer Join syntax
from tab_a, tab_b
where a.col_1 (+) = b.col_1
ANSI/ISO Equivalent
from tab_a a left outer join tab_b b
on a.col_1 = b.col_1
Should n't the above be a right outer join
Please could somebody confirm or explain if I am wrong.
Thanks in anticipation.
Simon
Note. The book is OCP Introduction to 9i sql (1Z0-007) page 115 (table 3-1) - author Jason Couchman

It seems so....
See
http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96540/statements_103a.htm#2107297

Similar Messages

Urgently need help with this

Hi!!
I urgently need help with this:
When I compile this in Flex Builder 3 it says: The element type 'mx:Application' must be terminated by the matching end-tag '</mx:Application>'.
but I have this end tag in my file, but when I try to switch from source view to desgin view it says, that: >/mx:Script> expected to terminate element at line 71, this is right at the end of the .mxml file. I have actionscript(.as) file for scripting data.
This is the mxml code to terminate apllication tag which I did as you can see:
MXML code:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" backgroundGradientAlphas="[1.0, 1.0]" backgroundGradientColors="[#007200, #000200]" width="1024" height="768" applicationComplete="popolni_vse()">
<mx:HTTPService id="bazaMME" url="lokalnabaza/baza_MME_svn.xml" showBusyCursor="true" resultFormat="e4x"/>
<mx:Script source="dajzaj.as"/>
<mx:states>
<mx:State name="Galerije">
    <mx:SetProperty target="{panel1}" name="title" value="Galerije MME"/>
    <mx:SetProperty target="{panel2}" name="title" value="opis slik"/>
    <mx:SetProperty target="{panel3}" name="title" value="Opis Galerije"/>
    <mx:AddChild relativeTo="{panel1}" position="lastChild">
    <mx:HorizontalList x="0" y="22" width="713.09863" height="157.39436" id="ListaslikGalerije"></mx:HorizontalList>
            </mx:AddChild>
            <mx:SetProperty target="{text1}" name="text" value="MME opisi galerij "/>
            <mx:AddChild relativeTo="{panel1}" position="lastChild">
                <mx:Label x="217" y="346" text="labela za test" id="izbr"/>
            </mx:AddChild>
            <mx:SetProperty target="{label1}" name="text" value="26. November 2009@08:06"/>
            <mx:SetProperty target="{label1}" name="x" value="845"/>
            <mx:SetProperty target="{label1}" name="width" value="169"/>
            <mx:SetProperty target="{Gale}" name="text" value="plac za Galerije"/>
        </mx:State>
        <mx:State name="Projekti"/>
    </mx:states>
<mx:MenuBar id="MMEMenu" labelField="@label" showRoot="true" fillAlphas="[1.0, 1.0]" fillColors="[#043D01, #000000]" color="#9EE499" x="8" y="24"
         itemClick="dajVsebino(event)" width="1006.1268" height="21.90141">
       <mx:XMLList id="MMEmenuModel">
             <menuitem label="O nas">
                 <menuitem label="reference podjetja" name="refMME" type="check" groupName="one"/>
                 <menuitem label="reference direktor" name="refdir" type="check" groupName="one"/>
              <menuitem label="Kontakt" name="podatMME" groupName="one" />
              <menuitem label="Kje smo" name="lokaMME" type="check" groupName="one" />
             </menuitem>
             <menuitem type="separator"/>
             <menuitem label="Galerija">
                 <menuitem label="Slovenija" name="galSvn" type="check" groupName="one"/>
                 <menuitem label="Nemčija" name="galDeu" type="check" groupName="one" />
             </menuitem>
             <menuitem type="separator"/>
             <menuitem label="projekti">
                 <menuitem label="Slovenija" name="projSvn" type="check" groupName="one"/>
                 <menuitem label="Nemčija" name="projDeu" type="check" groupName="one" />
                 <menuitem label="Madžarska" name="projHun" type="check" groupName="one"/>
             </menuitem>
         </mx:XMLList>
         </mx:MenuBar>
    <mx:Label x="845" y="10" text="25. November 2009@08:21" color="#FFFFFF" width="169" height="18.02817" id="label1"/>
    <mx:Label x="746" y="10" text="zadnja posodobitev:" color="#FFFFFF"/>
    <mx:Panel x="9" y="57" width="743.02814" height="688.4507" layout="absolute" title="Plac za Vsebino" id="panel1">
        <mx:Text x="0" y="-0.1" text="MME vsebina" width="722.95776" height="648.4507" id="Gale"/>
    </mx:Panel>
    <mx:Label x="197.25" y="748.45" color="#FFFFFF" text="Copyright © 2009 MME d.o.o." fontSize="12" width="228.73239" height="20"/>
    <mx:Label x="463.35" y="748.45" text="izdelava spletnih strani: FACTUM d.o.o." color="#FBFDFD" fontSize="12" width="287.60565" height="20"/>
    <mx:Panel x="759" y="53" width="250" height="705.07043" layout="absolute" title="Plac za hitre novice" id="panel3">
        <mx:Text x="0" y="0" text="MME novice" width="230" height="665.07043" id="text1"/>
        <mx:Panel x="-10" y="325.35" width="250" height="336.61972" layout="absolute" title="začasna panela" color="#000203" themeColor="#4BA247" cornerRadius="10" backgroundColor="#4B9539" id="panel2">
            <mx:Label x="145" y="53" text="vrednost" id="spremmen"/>
            <mx:Label x="125" y="78" text="Label"/>
            <mx:Label x="125" y="103" text="Label"/>
            <mx:Label x="0" y="53" text="spremenljivka iz Menuja:"/>
            <mx:Label x="45" y="78" text="Label"/>
            <mx:Label x="45" y="103" text="Label"/>
        </mx:Panel>
    </mx:Panel>
    <mx:Label x="9.9" y="10" text="plac za naslov MME vsebine" id="MMEnaslov" color="#040000"/>
     </mx:states></mx:Application>

I know it's been a while but… did you fix this?
It looks to me like you are terminating the <mx:Application> tag at the top. The opening tag should end like this: resultFormat="e4x">, not resultFormat="e4x"/> (Remove the /).
Carlos

Urgent-Need help with code for Master data enhancement

hi Experts,
I have appended YMFRGR field(Table MARC) to 0MAT_PLANT_ATTR datasource.
The key fields in the MARC table are MATNR and WERKS.Can anybody help with the user exit to populate this field,as am pretty new to ABAP.
Thanks in advance

Hi,
go through this link which has the similar problem:
https://forums.sdn.sap.com/click.jspa?searchID=1331543&messageID=2794783
hope it helps.
Thanks,
Amith

URGENTLY NEED HELP WITH NESTED REPEAT REGION

Im using dreamweaver to deevelop a page that displays questions in ann assessment to the user. First of all the page shows the assessment name to the user and then it gets some information about the questions in the assessment from the table called Item. It gets the Question_ID and then there is a repeat region which uses the Question_ID to display the questions in the assessment. There is a nested repeat region inside this which displays the possible answers the user can respond to the question with It gets this information from a table called outcome. The page should display each question and then all the possible answers but i am having problems and im not sure wether i am doing this in the correct way. What is wrong with my code? PLEASE HELP! can someone tell me what is going wrong and how i can fix this problem thamks.
here is my code.
Driver DriverassessmentRecordset = (Driver)Class.forName(MM_connAssessment_DRIVER).newInstance();
Connection ConnassessmentRecordset = DriverManager.getConnection(MM_connAssessment_STRING,MM_connAssessment_USERNAME,MM_connAssessment_PASSWORD);
PreparedStatement StatementassessmentRecordset = ConnassessmentRecordset.prepareStatement("SELECT Assessment_ID, Assessment_Name, Time_Limit, Display_Random, Record_Answers FROM Assessment.assessment WHERE Assessment_ID = '" + session.getValue("AssessmentID") + "' ");
ResultSet assessmentRecordset = StatementassessmentRecordset.executeQuery();
boolean assessmentRecordset_isEmpty = !assessmentRecordset.next();
boolean assessmentRecordset_hasData = !assessmentRecordset_isEmpty;
Object assessmentRecordset_data;
int assessmentRecordset_numRows = 0;
%>
<%
Driver DriveritemRecordset = (Driver)Class.forName(MM_connAssessment_DRIVER).newInstance();
Connection ConnitemRecordset = DriverManager.getConnection(MM_connAssessment_STRING,MM_connAssessment_USERNAME,MM_connAssessment_PASSWORD);
PreparedStatement StatementitemRecordset = ConnitemRecordset.prepareStatement("SELECT Question_ID, Assessment_ID FROM Assessment.item WHERE Assessment_ID = '" + session.getValue("AssessmentID") + "' ");
ResultSet itemRecordset = StatementitemRecordset.executeQuery();
boolean itemRecordset_isEmpty = !itemRecordset.next();
boolean itemRecordset_hasData = !itemRecordset_isEmpty;
Object itemRecordset_data;
int itemRecordset_numRows = 0;
%>
<%
Driver DriverquestionRecordset = (Driver)Class.forName(MM_connAnswer_DRIVER).newInstance();
Connection ConnquestionRecordset = DriverManager.getConnection(MM_connAnswer_STRING,MM_connAnswer_USERNAME,MM_connAnswer_PASSWORD);
//PreparedStatement StatementquestionRecordset = ConnquestionRecordset.prepareStatement("SELECT Question_Type, Number_Outcomes, Question_Wording FROM Answer.question WHERE Question_ID = '" + (((itemRecordset_data = itemRecordset.getObject("Question_ID"))==null || itemRecordset.wasNull())?"":itemRecordset_data) +"' ");
//ResultSet questionRecordset = StatementquestionRecordset.executeQuery();
%>
<%
Driver DriveroutcomeRecordset = (Driver)Class.forName(MM_connAnswer_DRIVER).newInstance();
Connection ConnoutcomeRecordset = DriverManager.getConnection(MM_connAnswer_STRING,MM_connAnswer_USERNAME,MM_connAnswer_PASSWORD);
PreparedStatement StatementoutcomeRecordset = ConnoutcomeRecordset.prepareStatement("SELECT Outcome_Number, Outcome_Text, Score, Feedback FROM Answer.outcome WHERE Question_ID = '" +itemRecordset.getObject("Question_ID")+ "' ");
                 ResultSet outcomeRecordset = StatementoutcomeRecordset.executeQuery();
                 boolean outcomeRecordset_isEmpty = !outcomeRecordset.next();
                boolean outcomeRecordset_hasData = !outcomeRecordset_isEmpty;Object outcomeRecordset_data;
              int outcomeRecordset_numRows = 0;
%>
<%
int Repeat1__numRows = -1;
int Repeat1__index = 0;
itemRecordset_numRows += Repeat1__numRows;
%>
<%
int Repeat2__numRows = -1;
int Repeat2__index = 0;
assessmentRecordset_numRows += Repeat2__numRows;
%>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>

<title>Assessment</title>

<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />


<link href="../css/style.css" rel="stylesheet" type="text/css" />
</head>
<body>
<table width="1000" border="0" cellpadding="0" cellspacing="0">

<tr>
    <td height="190"><img src="../img/assessment_login.png" alt="" name="navigation" width="1000" height="190" border="0" id="navigation" /></td>
</tr>
<tr>
    <td height="19"> </td>
</tr>
<tr>
    <td height="19">
    <table>
      <tr>
        <td width="990">Assessment Name:<%=(((assessmentRecordset_data = assessmentRecordset.getObject("Assessment_Name"))==null || assessmentRecordset.wasNull())?"":assessmentRecordset_data)%> </td>
        </tr>
      <tr>
        <td><% int count = 1; %> </td>
      </tr>
      <tr>
        <td valign="top"><table>
            <% while ((itemRecordset_hasData)&&(Repeat1__numRows-- != 0)) { %>
<tr>
              <td width="21">
                 </td>
              <td width="86">Question:<%= count %></td>
            </tr>
            <tr>
              <td></td>
              <td>
                 <%
                 PreparedStatement StatementquestionRecordset = ConnquestionRecordset.prepareStatement("SELECT Question_Type, Number_Outcomes, Question_Wording FROM Answer.question WHERE Question_ID = '" +itemRecordset.getObject("Question_ID")+"' ");
                 ResultSet questionRecordset = StatementquestionRecordset.executeQuery();
              boolean questionRecordset_isEmpty = !questionRecordset.next();
              boolean questionRecordset_hasData = !questionRecordset_isEmpty;
              Object questionRecordset_data;
              int questionRecordset_numRows = 0;
                 %> <%= questionRecordset.getObject("Question_Wording") %></td>
            </tr>
            <tr>
              <td></td>
              <td>
                 </td>
            </tr>
            <tr>
              <td></td>
              <td>
                <table>
                  <% while ((outcomeRecordset_hasData)&&(Repeat2__numRows-- != 0)) {%>
                  <tr>
                    <td><%=(((outcomeRecordset_data = outcomeRecordset.getObject("Outcome_Number"))==null || outcomeRecordset.wasNull())?"":outcomeRecordsetRecordset_data)%></td>
                    <td><%=(((outcomeRecordset_data = outcomeRecordset.getObject("Outcome_Text"))==null || outcomeRecordset.wasNull())?"":outcomeRecordsetRecordset_data)%></td>
                    <td><%=(((outcomeRecordset_data = outcomeRecordset.getObject("Score"))==null || outcomeRecordset.wasNull())?"":outcomeRecordsetRecordset_data)%></td>
                    <td><%=(((outcomeRecordset_data = outcomeRecordset.getObject("Feedback"))==null || outcomeRecordset.wasNull())?"":outcomeRecordsetRecordset_data)%></td>
                    <td><%=(((outcomeRecordset_data = outcomeRecordset.getObject("Question_ID"))==null || outcomeRecordset.wasNull())?"":outcomeRecordsetRecordset_data)%></td>
                  </tr>
                  <%
Repeat2__index++;
outcomeRecordset_hasData = outcomeRecordset.next();
%>
                </table>
                <table>
                  <tr> </tr>
                  <tr> </tr>
                </table></td>
            </tr>
            <%
Repeat1__index++;
itemRecordset_hasData = itemRecordset.next();
count++;
//questionRecordset.close();
//StatementquestionRecordset.close();
//ConnquestionRecordset.close();
%>
Here is the exception i am gettingorg.apache.jasper.JasperException: Unable to compile class for JSP
An error occurred at line: 115 in the jsp file: /delivery/session.jsp
Generated servlet error:
C:\Servers\Tomcat 5.0\work\Catalina\localhost\assessment\org\apache\jsp\delivery\session_jsp.java:220: cannot find symbol
symbol : variable outcomeRecordsetRecordset_data
location: class org.apache.jsp.delivery.session_jsp
out.print((((outcomeRecordset_data = outcomeRecordset.getObject("Outcome_Number"))==null || outcomeRecordset.wasNull())?"":outcomeRecordsetRecordset_data));
^
An error occurred at line: 116 in the jsp file: /delivery/session.jsp
Generated servlet error:
C:\Servers\Tomcat 5.0\work\Catalina\localhost\assessment\org\apache\jsp\delivery\session_jsp.java:223: cannot find symbol
symbol : variable outcomeRecordsetRecordset_data
location: class org.apache.jsp.delivery.session_jsp
out.print((((outcomeRecordset_data = outcomeRecordset.getObject("Outcome_Text"))==null || outcomeRecordset.wasNull())?"":outcomeRecordsetRecordset_data));
^
An error occurred at line: 117 in the jsp file: /delivery/session.jsp
Generated servlet error:
C:\Servers\Tomcat 5.0\work\Catalina\localhost\assessment\org\apache\jsp\delivery\session_jsp.java:226: cannot find symbol
symbol : variable outcomeRecordsetRecordset_data
location: class org.apache.jsp.delivery.session_jsp
out.print((((outcomeRecordset_data = outcomeRecordset.getObject("Score"))==null || outcomeRecordset.wasNull())?"":outcomeRecordsetRecordset_data));
^
An error occurred at line: 118 in the jsp file: /delivery/session.jsp
Generated servlet error:
C:\Servers\Tomcat 5.0\work\Catalina\localhost\assessment\org\apache\jsp\delivery\session_jsp.java:229: cannot find symbol
symbol : variable outcomeRecordsetRecordset_data
location: class org.apache.jsp.delivery.session_jsp
out.print((((outcomeRecordset_data = outcomeRecordset.getObject("Feedback"))==null || outcomeRecordset.wasNull())?"":outcomeRecordsetRecordset_data));
^
An error occurred at line: 119 in the jsp file: /delivery/session.jsp
Generated servlet error:
C:\Servers\Tomcat 5.0\work\Catalina\localhost\assessment\org\apache\jsp\delivery\session_jsp.java:232: cannot find symbol
symbol : variable outcomeRecordsetRecordset_data
location: class org.apache.jsp.delivery.session_jsp
out.print((((outcomeRecordset_data = outcomeRecordset.getObject("Question_ID"))==null || outcomeRecordset.wasNull())?"":outcomeRecordsetRecordset_data));
^
An error occurred at line: 119 in the jsp file: /delivery/session.jsp
Generated servlet error:
Note: C:\Servers\Tomcat 5.0\work\Catalina\localhost\assessment\org\apache\jsp\delivery\session_jsp.java uses or overrides a deprecated API.
An error occurred at line: 119 in the jsp file: /delivery/session.jsp
Generated servlet error:
Note: Recompile with -Xlint:deprecation for details.
An error occurred at line: 119 in the jsp file: /delivery/session.jsp
Generated servlet error:
Note: C:\Servers\Tomcat 5.0\work\Catalina\localhost\assessment\org\apache\jsp\delivery\session_jsp.java uses unchecked or unsafe operations.
An error occurred at line: 119 in the jsp file: /delivery/session.jsp
Generated servlet error:
Note: Recompile with -Xlint:unchecked for details.
5 errors
     org.apache.jasper.compiler.DefaultErrorHandler.javacError(DefaultErrorHandler.java:84)     org.apache.jasper.compiler.ErrorDispatcher.javacError(ErrorDispatcher.java:332)
org.apache.jasper.compiler.Compiler.generateClass(Compiler.java:412)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:472)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:451)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:439)
     org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:511)     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:295)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)

Hi,
Dont have much time to go through your code, but apparently i can see the error is becoz of the following reason.
In the following code, you have used "outcomeRecordset_data ", but its not declared. You need to declare the variable first before you can use it.
<% while ((outcomeRecordset_hasData)&&(Repeat2__numRows-- != 0)) {%>
                  <tr>
                    <td><%=(((outcomeRecordset_data = outcomeRecordset.getObject("Outcome_Number"))==null || outcomeRecordset.wasNull())?"":outcomeRecordsetRecordset_data)%></td>
                    <td><%=(((outcomeRecordset_data = outcomeRecordset.getObject("Outcome_Text"))==null || outcomeRecordset.wasNull())?"":outcomeRecordsetRecordset_data)%></td>
                    <td><%=(((outcomeRecordset_data = outcomeRecordset.getObject("Score"))==null || outcomeRecordset.wasNull())?"":outcomeRecordsetRecordset_data)%></td>
                    <td><%=(((outcomeRecordset_data = outcomeRecordset.getObject("Feedback"))==null || outcomeRecordset.wasNull())?"":outcomeRecordsetRecordset_data)%></td>
                    <td><%=(((outcomeRecordset_data = outcomeRecordset.getObject("Question_ID"))==null || outcomeRecordset.wasNull())?"":outcomeRecordsetRecordset_data)%></td>
                  </tr>
                  <%
Repeat2__index++;
outcomeRecordset_hasData = outcomeRecordset.next();
%>Try declaring the "outcomeRecordset_data " on top as an object
Hope it helps

Need help with a simple Rename/Join Domain/Install SCCM Client Task Sequence

Good morning everyone,
I need to create a very simple task sequence that will run an .exe that we have created that renames the computer based on a prefix-serialnumber...then restarts, adds it to our domain, restarts, and then installs the SCCM client.
1) run rename program
2) join to domain
3) install sccm client
Can someone help me with the steps that will be required for this?
Thank you very much!
**note, these will not be formatted/have an OS installation ran on it with this task sequence. The situation is that we are receiving 400+ custom configured laptops, and we're going to have to rename/join/install sccm on each...trying to simplify
this
any recommendations are greatly appreciated!

Narcoticoo : Which boot image am i supposed to be using to insure that it boots into Standard Windows, NOT WinPE? I have a standard x86 package / boot image i've been using. If it boots up with this, it goes into WinPE (correct me if I'm wrong,
for this seems to be what happens each time it boots off the boot image...it does not go into windows standard/full)
When I go into properties of the one i'm using, and take the check off of "Use a boot image", where it will not boot to WinPE, it will not even show up in my list of available task sequences for
1) when I PXE boot to try the task sequence, or
2) when I try to make stand-alone media for this task sequence as you have suggested
When I run the standalone media, the only log files I find are the following with errors:
PackageID = 'MPS0014E' InstallSoftware
12/8/2014 12:28:36 PM 2344 (0x0928)
BaseVar = '', ContinueOnError='' InstallSoftware
12/8/2014 12:28:36 PM 2344 (0x0928)
ProgramName = 'MPHS - Rename Computer' InstallSoftware
12/8/2014 12:28:36 PM 2344 (0x0928)
SwdAction = '0002' InstallSoftware
12/8/2014 12:28:36 PM 2344 (0x0928)
IsSMSV4PlusClient() == true, HRESULT=80004005 (e:\nts_sccm_release\sms\client\osdeployment\installsoftware\main.cpp,332)
InstallSoftware 12/8/2014 12:28:36 PM
2344 (0x0928)
Configuration Manager client is not installed
InstallSoftware 12/8/2014 12:28:36 PM
2344 (0x0928)
Process completed with exit code 2147500037
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
Failed to run the action: Install Package.
Unspecified error (Error: 80004005; Source: Windows)
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
Failed to run the action: Install Package. Execution has been aborted
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
Do not send status message in full media case
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
Failed to run the last action: Install Package. Execution of task sequence failed.
Unspecified error (Error: 80004005; Source: Windows)
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
Do not send status message in full media case
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
Execution::enExecutionFail != m_eExecutionResult, HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmanager\tsmanager.cpp,866)
TSManager 12/8/2014 12:43:48 PM
1544 (0x0608)
Task Sequence Engine failed! Code: enExecutionFail
TSManager 12/8/2014 12:43:48 PM
1544 (0x0608)
TSManager 12/8/2014 12:43:48 PM
1544 (0x0608)
Task sequence execution failed with error code 80004005
TSManager 12/8/2014 12:43:48 PM
1544 (0x0608)

Need help with program for Inner join

Hello Experts,
I need to create a list from table sbook containing booking number (sbook-bookid), customer number (sbook-customid), customer name (scustom-name) , customer class (sbook-class) and ticket price (sflight-price). I am new to ABAP and am very confused I tried reading up some examples and came up with the attached program
Attached is my program for inner join
Kindly Help
Thanks Su

Hi Su K
          You May use key fields , Foreign keys for joining , Here
SELECT SBOOK~BOOKID SBOOK~CUSTOMID SBOOK~CLASS
SCUSTOM~ID SCUSTOM~NAME FROM SFILGHT
   INNER JOIN SBOOK ON   SBOOK~CARRID EQ SFILGHT~CARRID
                                          SBOOK~CONNID EQ SFILGHT~CONNID
                                          SBOOK~FLDATE EQ SFILGHT~FLDATE
INNER JOIN SCUSTOM ON SCUSTOM~ID = SBOOK~ID

Urgent - Need help with Lighting Effects Filter

Hi,
I need urgent help on something regarding the Lighting Effects filter in Adobe Photoshop CS5. I need lighting effect urgently to complete a project.
I am using Photoshop CS5 on a Windows Vista computer in 64-bit mode.
On the net it is given that you can run photoshop CS5 in 32-bit mode to use the lighting effects filter - both on Mac and PC.
My Problem:
While on the net it is given how to change from 64-bit to 32-bit and vice-versa, I have my Photoshop CS5 installed on 'E - Drive' and not on 'C - Drive' due to lack of space. I have followed all the instructions on how to open it in 32-bit mode on the net, but I still cannot use the lighting effects plugin.
What I need is if someone could give simple and clear instructions on how to open Photoshop CS5 32-bit version instead of opening the default 64-bit version on Windows Vista - that would be great.
Looking forward to answers.
Thanks.

That advice about running the 32 bit version of cs5 for the Render> Lighting Effects filter
only pertains to the mac version of photoshop cs5.
The lighting effects filter does work in the 64 bit version of photoshop cs5 on windows, your
document just has to be 8 bits/channel and in the RGB Color mode (Image>Mode) same
for using the lighting effects filter in the 32 bit version of cs5.
Added: In general it's frowned upon installing photoshop on drives other than C drive.
MTSTUNER
Message was edited by: MTSTUNER

Urgent - need help with ring gradient

Does anyone know how do I apply spectrum gradient to this circle as on pic (its a dry brush stroke that comes with illustrator)
Please help, i tried everything

this is in CS5. in CS6 and above you can make life much easier by using a gradient along a stroked circle.
these are your ingredients: circle with the appropriate brush and a line with a stroke.
rotate the line about one end however many steps you need for each colour (rotate tool, alt-click on the bottom of the path, use smart guides to pinpoint it).
change each path to your colours. make a copy of the first colour (orange here) and paste in front (ctrl+F).
select all the lines. make a blend (ctrl + alt + B).
select the brushed circle. expand appearance (object > expand appearance). this particular one was a group, and we want a compound path, so I ungrouped it and made a compound path (ctrl + 8). position it over your colour wheel. make sure its in front.
select both and make a clipping path (ctrl + 7).

Need help with creating multi out instruments...

What do I do wrong here… I tried to figure this out already since at least 1 year. I am desperate!
Here is what I do while trying to make a multi output instrument in logic studio 9:
1:I create 1 software instrument:
2: I choose a multi output stereo AU Instrument:
3: I load 5 software instruments, each on its own channel, all in the same Logic Instrument:
4: In the mixer, I created 5 Aux channels by clicking on the + sign of the Instrument:
5: In the arrange window, I create 5 new channels from the Track menu with New with Next Midi Channel:
Now when playing the 1st instrument track, still the sound goes directly to the output 1/2, the Aux sliders don't have any control over the volume. What do I do wrong?
Hope to find some help,
André

Hi
Depending on which version of Kontakt you are using, there are some "automated" ways of creating additional outputs, and assigning each sound to a different output:
Pic show Kontakt 4
Once you have done that, and (in Logic) loaded a Multi-Out instance of Kontakt, all you have to do is create the additional Aux channels in the mixer (using the small +) at the bottom of the Instrument Channel Strip).
CCT

Need help with digital audio out on qip7232

Have seen lots of posts about digital and optical outputs from the QIP 7232. I want to run a digital, stereo, 2 channel LPCM signal out to a stereo receiver. There are posts on this forum that say that both outputs are disabled by Verizin. There are other posts that suggest various settings that could be tried but none of these have been confirmed to work. I have set the output to Stereo in the regular menu. I have set the output to LPCM in the hidden menu. Still, no audio output. I do have analogue output from the stereo left and right but want to get digital. Can anyone help ? Does anyone have either the digital or optical outputs working? Thank you Jim {Edited for privacy}

toslink cable will also work with MBP.

URGENT Need Help with Login - "Skype can't connect"

Hello, I've been trying to log into Skype for the past 2 hours and it just keeps coming up with an error message, "Skype can't connect". It does not provide any other information on how to fix the issue. I use Skype for work and it is not too helpfuly right now that it is not working. PLEASE HELP! Thank you so much!

Kevazy wrote:
Ruwim, could you please read my message I have sent you? Regards,KevazyTry to reset all Skype settings. Quit Skype or use Windows Task Manager to kill any Skype.exe process. Go to Windows Start and in the Search/Run box type %appdata% and then press Enter or click the OK button. The Windows File Explorer will pop up. There locate a folder named “Skype”. Rename this folder to something different, e.g. Skype_old. Next go to Windows Start and in the Search/Run box type %temp%\skype and then press Enter or click the OK button. Delete the DbTemp folder. Restart Skype. N.B. If needed, you will still be able to re-establish your call and chat history. All data is still saved in the Skype_old folder.

I need help with the cut out filter.

I have taken photos of a face with bright make up on and i need the filter cutout on the image because i'm trying to use a pop art style. But cut out has one colour scheme so I lose all the bright make up and it becomes all skin tones. After hours of fiddling with the image I managed to get the red lips on the picture in cut out style, but i don't know how i did it and i need to do it to the rest of the eye make up. Can you please tell me how?

try something like this:
http://www.catosplace.net/blogs/personal/?tag=cartoon-effects
For your image you might want to try to add Image->Adjustments->Vibrance and add +100 Vibrance to bring out the makeup, then add a Curves adjustment to increase the contrast through the roof and then add both Poster Edges and Cutout from Filter->Artistic

Urgent: Need Help with Substring/Instring

I am taking a user input P_User_Name.
P_User_Name is firstname/middlename/lastname
Some examples:
'James/Earl/Jones'
'//Madonna'
'Alec//Baldwin'
Can someone tell me the code in PL/SQL to extract first name, middlename, lastname for a given P_User_Name.
I would really appreciate your help.
Thanks
Home722

Duplicate/triplicate posting... pathetic!!
Urgent: SQL Gurus: Please Help
Substring

Urgently need help with webservices

I really really need to get a simple webservice working But all I'm getting is errors I have a second post describing my problems I'd be forever gratefully if someone would help!
cumminsD

Can any body see why this won't work ???
ME ~]$ setenv CLASSPATH $AXIS_HOME
[ME ~]$ setenv CLASSPATH "$CLASSPATH":$AXIS_LIB/axis.jar
[ME ~]$ setenv CLASSPATH "$CLASSPATH":$AXIS_LIB/commons-logging.jar
[ME ~]$ setenv CLASSPATH "$CLASSPATH":$AXIS_LIB/jaxrpc.jar
[ME ~]$ setenv CLASSPATH "$CLASSPATH":$AXIS_LIB/log4j-1.2.4.jar
[ME ~]$ setenv CLASSPATH "$CLASSPATH":$AXIS_LIB/commons-discovery.jar
[ME ~]$ setenv CLASSPATH "$CLASSPATH":$AXIS_LIB/wsdl4j.jar
[ME ~]$ setenv CLASSPATH "$CLASSPATH":$AXIS_LIB/xerces.jar
[ME ~]$ setenv CLASSPATH "$CLASSPATH":$AXIS_LIB/saaj.jar
[ME ~]$ setenv CLASSPATH "$CLASSPATH":$AXIS_LIB/axis-ant.jar
[ME ~]$ setenv CLASSPATH "$CLASSPATH":$WEBSERVICES_HOME/junit3.8.1/junit.jar
[ME ~]$ echo $CLASSPATH
foo/axis-1_1RC2:foo/axis-1_1RC2/lib/axis.jar:foo/axis-1_1RC2/lib/commons-logging.jar:foo/axis-1_1RC2/lib/jaxrpc.jar:foo/axis-1_1RC2/lib/log4j-1.2.4.jar:foo/axis-1_1RC2/lib/commons-discovery.jar:foo/axis-1_1RC2/lib/wsdl4j.jar:foo/axis-1_1RC2/lib/xerces.jar:foo/axis-1_1RC2/lib/saaj.jar:foo/axis-1_1RC2/lib/axis-ant.jar:foo/junit3.8.1/junit.jar
[ME ~]$
[ME ~]$ cd $AXIS_HOME
[ME axis-1_1RC2]$ java samples.userguide.example2.CalcClient -p8080 add 2 5
Exception in thread "main" java.lang.NoClassDefFoundError: samples/userguide/example2/CalcClient
[ME axis-1_1RC2]$
[ME axis-1_1RC2]$ ls -l
total 28
drwxr-xr-x 5 ME ME 4096 mar 5 21:07 docs
drwxr-xr-x 5 ME ME 4096 mai 27 14:52 lib
-rw-r--r-- 1 ME ME 502 mar 5 21:07 README
-rw-r--r-- 1 ME ME 3095 mar 5 21:07 release-notes.html
drwxr-xr-x 19 ME ME 4096 avr 29 15:46 samples
drwxr-xr-x 3 ME ME 4096 mar 5 21:07 webapps
drwxr-xr-x 2 ME ME 4096 mar 5 21:07 xmls
[ME axis-1_1RC2]$ cd ..
[ME ~/foo]$ cd ..
[ME ~]$ cd $WEBSERVICES
WEBSERVICES: Undefined variable.
[ME ~]$ cd $WEBSERVICES_HOME
[ME ~/foo]$ ls -l
total 142236
drwxr-xr-x 7 cummins cummins 4096 mar 5 21:07 axis-1_1RC2
-rw-rw-r-- 1 cummins cummins 34652160 avr 25 18:35 axis-1_1rc2.tar
-rwxrwxr-x 1 cummins cummins 26532079 avr 24 16:06 j2sdk-1_3_1_07-linux-i586.bin
drwxr-xrwx 12 cummins cummins 4096 avr 24 15:00 jakarta-tomcat-4.0.6
-rw-rw-r-- 1 cummins cummins 20736000 avr 24 11:48 jakarta-tomcat-4.0.6.tar
drwxr-xr-x 9 cummins cummins 4096 d�c 6 20:53 jdk1.3.1_07
drwxrwxr-x 5 cummins cummins 4096 sep 4 2002 junit3.8.1
-rw-rw-r-- 1 cummins cummins 441665 mai 9 12:34 junit3.8.1.zip
-rw-rw-r-- 1 cummins cummins 35824515 avr 29 12:34 jwsdp-1_1-unix.sh
drwxr-xr-x 13 cummins cummins 4096 avr 28 04:01 mod_perl-1.99_09
-rw-rw-r-- 1 cummins cummins 3092480 mai 2 17:52 mod_perl-2.0-current.tar
drwxr-xr-x 3 cummins cummins 4096 mai 9 16:59 myjavafiles
drwxr-xr-x 5 cummins cummins 4096 mai 9 11:55 xerces-1_4_4
-rw-rw-r-- 1 cummins cummins 24156160 mai 9 10:44 Xerces-J-bin.1.4.4.tar
[cummins@pclx11 ~/foo]$ cd $AXIS_LIB
foo/axis-1_1RC2/lib: No such file or directory.
[cummins@pclx11 ~/foo]$ cd ..
[cummins@pclx11 ~]$ cd $AXIS_LIB
[cummins@pclx11 lib]$ ls -l
total 4224
-rw-r--r-- 1 cummins cummins 384889 mar 5 21:07 axis-ant.jar
-rw-r--r-- 1 cummins cummins 1224774 mar 5 21:07 axis.jar
-rw-r--r-- 1 cummins cummins 67334 mar 5 21:07 commons-discovery.jar
-rw-r--r-- 1 cummins cummins 26388 mar 5 21:07 commons-logging.jar
drwxrwxr-x 2 cummins cummins 4096 mai 27 14:51 data
drwxrwxr-x 3 cummins cummins 4096 mai 27 14:51 docs
-rw-r--r-- 1 cummins cummins 35658 mar 5 21:07 jaxrpc.jar
-rw-r--r-- 1 cummins cummins 2693 nov 15 2001 LICENSE
-rw-r--r-- 1 cummins cummins 378778 mar 5 21:07 log4j-1.2.4.jar
-rw-r--r-- 1 cummins cummins 478 nov 15 2001 Readme.html
-rw-r--r-- 1 cummins cummins 18402 mar 5 21:07 saaj.jar
drwxrwxr-x 6 cummins cummins 4096 mai 27 14:52 samples
-rw-r--r-- 1 cummins cummins 113178 mar 5 21:07 wsdl4j.jar
-rw-r--r-- 1 cummins cummins 1812019 nov 15 2001 xerces.jar
-rw-r--r-- 1 cummins cummins 193032 nov 15 2001 xercesSamples.jar
[ME lib]$
[ME ~]$ cd $AXIS_HOME
[ME axis-1_1RC2]$ cd samples/userguide/example2
[me example2]$ ls -l
total 20
-rw-rw-r-- 1 cummins cummins 1534 mai 22 16:50 CalcC.java
-rw-r--r-- 1 cummins cummins 2484 mar 5 21:07 CalcClient.class
-rw-r--r-- 1 cummins cummins 4202 mar 5 21:07 CalcClient.java
-rw-r--r-- 1 cummins cummins 2797 mar 5 21:07 Calculator.java

Need help with GUI lay out HELP PLEASE

hi iam trying to design this GUI for an assignment i cant seem to post pictures so i uploaded the picture of how its suppose to look
http://ca.geocities.com/shamtu4life2000/layout.jpg
i believe i got the code down correct but the layout is messed up also my teacher specified that the open color area be set at 400x300 i believe i did that correct my problem is the layout i get is jumbled and i dont know if i got the open area panel set correctly
this is my code
import java.awt.*;
import javax.swing.*;
public class colorFrame extends JFrame{
     public colorFrame(){
          //get the content pane of the frame
          //JPanel radio = JPanel();
          Container container = getContentPane();
          //set flowlayout
          container.setLayout(new FlowLayout());
          //create panel p1 set grid
          JPanel p1 = new JPanel();
          p1.setLayout(new GridLayout(1,3)) ;
          //add check boxes
          p1.add(new JCheckBox("RED"));
          p1.add(new JCheckBox("GREEN"));
          p1.add(new JCheckBox("BLUE"));
          //Create panel p2 set grid
          JPanel p2 = new JPanel();
          p2.setLayout (new GridLayout(1,3));
          //Add radio buttons
          p2.add(new JRadioButton("Light"));
          p2.add(new JRadioButton("Normal"));
          p2.add(new JRadioButton("Dark"));
          //Create panel p3
          JPanel p3 = new JPanel();
          p3.setLayout (new GridLayout());
          //add button
          p3.add(new JButton("Show"));
          //Create panel p4
          JPanel p4 = new JPanel();
          p4.setLayout (new GridLayout());
          Dimension d = new Dimension(400,300);
          p4.setPreferredSize(d);
          //Add panels to frame
          container.add(p1, BorderLayout.SOUTH);
          container.add(p2, BorderLayout.SOUTH);
          container.add(p3, BorderLayout.EAST);
          container.add(p4, BorderLayout.NORTH);
     //Main Method
     public static void main(String[] args){
          colorFrame frame = new colorFrame();
          frame.setTitle("Color Frame");
          frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
          frame.setSize(500,400);
          frame.setVisible(true);
}if any one got anyideas please let me know below i posted the assignment as background information thanks
The GUI has a JPanel in the center region that displays different colors. All of the other components (3 JCheckboxes, 3 JRadioButtons, and one JButton) are on a JPanel in the south region of the JFrame. We haven�t yet learned how to make a GUI do anything in response to user generated events, such as mouse clicks. For this question, we just want to practice controlling the appearance of the GUI using layout managers.
In the constructor of your ColorFrame class, create three JCheckbox objects, three JRadioButtons, and one JButton. All you need to know about these classes is that each
one has a constructor that takes one String argument:
new JCheckbox(�Red�)
new JRadioButton(�Light�)
new JButton(�Show�)
We want to use JPanels and layout managers to control the appearance of the GUI. We want the three JCheckboxes to remain together, so we put them on a JPanel. Similarly for the three JRadioButtons � put them on another JPanel. We want the JButton to retain its preferred size � not to grow to fill an entire region of the GUI --so put it on another JPanel. These JPanels should use FlowLayout.
We want to put all of these JPanels in the south region of the JFrame, but if we just add them to the frame, one will go on top of the other and we�ll only see the last one that was added. Instead, use one or more additional JPanels with GridLayout to hold the first set of JPanels, then add the JPanels holding all the other components to the JFrame.
You also want to create another instance of JPanel to add to the center region of the JFrame. Unlike the other JPanels, this one won�t hold other components; it will display different colors. (You don�t have to implement this color display.) When you pack the JFrame, the other JPanels will become large enough to hold the other components they contain, but since this one holds no components, it would shrink to zero by default. To prevent this, you should set its preferred size to some non-zero value, say 400 x 300 pixels.
Your class should have a main method that calls the constructor tocreate an instance of this class, sets its size using pack, sets its default close operation, and makes it visible.

You have set the container layout to FlowLayout, but you then try to place panels using the BorderLayout constants, you should use BorderLayout on the container.

URGENT - need help with ansi/iso outer joins

Similar Messages

Maybe you are looking for