[urgent] oracle-xe data failure, udump file generation resulted in fulldisk
Hi all - We've been running oracle-xe for some time, for the past week the trace files generated in udump peeked out and resulted in a full disk. After freeing up some diskspace and then rebooting the data written to the oradata /*.dbf seems to be lost for the last week. Our backups seems to be corrupt as well as this happened a few days ago.
Our database is relatively small ~6-7GB in datafiles /*.dbf, the trace files reached 129GB.
We are considering different disaster recovery alternatives offered by Oracle but would like to know if there is anything we can do? Would it be useful for a support technician to get access to the udump files, do they contain any useful information that might be recoverable?
Thanks in advance,
Mikael
version: oracle-xe 10.2.0.1.0
A few lines:
db_recovery_file_dest_size of 10240 MB is 0.98% used. This is a ...
Heap size 2208K exceeds notification threshold (2048K) ...
It doesn't say that much but I will keep monitoring it. Check details on the storage:
Space Allocated: 1.092 MB
Available: 4.028 MB
Physical Limit: 5.120 MB
Percent Used: 21%
Could this information be wrong?
Here's a ls -la from oradata:
-rw-r----- 1 oracle dba 7061504 Apr 10 16:54 control.dbf
-rw-r----- 1 oracle dba 597696512 Apr 10 16:46 sysaux.dbf
-rw-r----- 1 oracle dba 408952832 Apr 10 16:51 system.dbf
-rw-r----- 1 oracle dba 308289536 Apr 10 16:47 temp.dbf
-rw-r----- 1 oracle dba 183508992 Apr 10 16:46 undo.dbf
-rw-r----- 1 oracle dba 104865792 Apr 10 15:46 users.dbf
So, what if we run the database for 2 weeks and we fill up the remaining limit 21->100% does it mean that everything will be gone since the last start if we shut it down and perform a backup?
It would feel a lot better if we could take the storage issue out of the equation,
Thanks again, appreciate it!
Mikael
Similar Messages
-
How can i query oracle database data to xml file with c++?
I want query data to xml file directly in my c++ application .
I know the oracle XSU provide interferce for query data to xml
file directly.
But XSU for oracle8i does not support c++.
I do not know if XSU for oracle9i support c++.
can you tell me?
If i do not use XSU to finish my applicayion.
what interface that oracle provide can help me do my work?
thank you !BTW why do you want to migrate oracle database data to db2 database? Any specific project requirement like Parallel run with Oracle database (e.g data replication)? Or any other issues - Cost? Manageability? Availability? Business requirements?
Do you need to do a day-to-day data transfer or it is for permanent migration? -
Outbound oracle data into xml file
Hi Odie,
Your previous inputs for xml inbound was working fine, in the similar way now I need outbound the oracle apps data into .xml file format. For that I've written one sample script like this. I thought of making use of the utl_file option in Oracle apps.
declare
l_log_handle UTL_FILE.FILE_TYPE;
l_log_name varchar2(50);
l_path_2 varchar2(40);
l_global_file varchar2(50);
l_time number:=1;
cursor cur1 is
select xmltype(cursor(select * from fnd_menus where rownum <101)) a from dual;
--select menu_id from fnd_menus where rownum<100;
begin
BEGIN
SELECT DECODE (INSTR (VALUE, ','),
0, VALUE,
SUBSTR (VALUE, 1, (INSTR (VALUE, ',', 1)) - 1)
INTO l_path_2
FROM v$parameter
WHERE NAME = 'utl_file_dir';
EXCEPTION
WHEN OTHERS THEN
dbms_output.put_line('Error while getting Unix Path ' || SQLERRM);
END;
l_log_name := 'XGBIZ_'||TO_CHAR (SYSDATE, 'YYMMDD')||l_time;
l_log_name := CONCAT(l_log_name,'.xml');
l_global_file := l_log_name;
l_log_handle := UTL_FILE.FOPEN(l_path_2,l_log_name,'W');
for cur2 in cur1 loop
UTL_FILE.PUT_LINE(l_log_handle, cur2);
end loop;
utl_file.fclose_all;
EXCEPTION
WHEN UTL_FILE.INVALID_OPERATION THEN
dbms_output.put_line('Invalid Operation For '|| l_global_file);
UTL_FILE.FCLOSE_ALL;
WHEN UTL_FILE.INVALID_PATH THEN
dbms_output.put_line('Invalid Path For '|| l_global_file);
UTL_FILE.FCLOSE_ALL;
WHEN UTL_FILE.INVALID_MODE THEN
dbms_output.put_line('Invalid Mode For '|| l_global_file);
UTL_FILE.FCLOSE_ALL;
WHEN UTL_FILE.INVALID_FILEHANDLE THEN
dbms_output.put_line('Invalid File Handle '|| l_global_file);
UTL_FILE.FCLOSE_ALL;
WHEN UTL_FILE.WRITE_ERROR THEN
dbms_output.put_line('Invalid Write Error '|| l_global_file);
UTL_FILE.FCLOSE_ALL;
WHEN UTL_FILE.READ_ERROR THEN
dbms_output.put_line('Invalid Read Error '|| l_global_file);
UTL_FILE.FCLOSE_ALL;
WHEN UTL_FILE.INTERNAL_ERROR THEN
dbms_output.put_line('Internal Error');
UTL_FILE.FCLOSE_ALL;
WHEN OTHERS THEN
dbms_output.put_line('Other Error '||'SQL CODE: '||SQLCODE||' Messg: '||SQLERRM);
UTL_FILE.FCLOSE_ALL;
end;
when running this script I am getting error
ERROR at line 30:
ORA-06550: line 30, column 2:
PLS-00306: wrong number or types of arguments in call to 'PUT_LINE'
ORA-06550: line 30, column 2:
PL/SQL: Statement ignored
if in the cursor declaration happen to use 'select menu_id from fnd_menus ' a plain record then it is successfully creating.
If tried again revert to actual select statement ' select xmltype(cursor(select * from fnd_menus where rownum <101)) a from dual'
then its erring out as above said.
Please give me your valuable inputs in this regard.
Thanks & Regards
NagendraHi,
There are multiple ways to generate XML documents from relational data.
Here are some :
-- SQL/XML functions : XMLElement, XMLAgg, XMLAttributes etc.
-- DBMS_XMLGEN package
select dbms_xmlgen.getXML('SELECT * FROM scott.emp')
from dual;-- XMLType constructor over a REF CURSOR (the one you chose)
select xmlserialize(document
xmltype(
cursor(
select *
from scott.emp
as clob
from dual;-- From a DBUriType
select xmlserialize(document
dburitype('/SCOTT/EMP').getXML()
as clob
from dual;-- From XQuery using ora:view function
select xmlserialize(document
xmlquery('<ROWSET>{ora:view("SCOTT","EMP")}</ROWSET>' returning content)
as clob indent size = 1
from dual;If a column is NULL in the result set, those methods (except XMLElement) won't create the corresponding element.
There's an option available for the XQuery method, but only in version 11.2.
So if you want to output empty elements, you'll have to use DBMS_XMLGEN with setNullHandling method :
DECLARE
ctx DBMS_XMLGEN.ctxHandle;
v_out CLOB;
rc SYS_REFCURSOR;
BEGIN
OPEN rc FOR
SELECT *
FROM scott.emp
ctx := DBMS_XMLGEN.newContext(rc);
DBMS_XMLGEN.setNullHandling(ctx, DBMS_XMLGEN.EMPTY_TAG);
v_out := DBMS_XMLGEN.getXML(ctx);
DBMS_XMLGEN.closeContext(ctx);
CLOSE rc;
DBMS_XSLPROCESSOR.clob2file(v_out, 'TEST_DIR', 'test_out.xml');
END;
I thought of making use of the utl_file option in Oracle apps.You could, but you might find DBMS_XSLPROCESSOR.clob2file procedure more convenient for that (see above).
All you have to do is serializing the XML in a CLOB variable, and call the procedure.
WHERE NAME = 'utl_file_dir';The "utl_file_dir" init. parameter is deprecated since 10g, use directory objects instead. -
Upload data from excel file to Oracle table
Dear All,
I have to upload data from excel file to Oracle table without using third party tools and without converting into CSV file.
Could you tell me please how can i do this using PLSQl or SQL Loader.
Thnaks in Advance..Dear All,
I have to upload data from excel file to
Oracle table without using third party tools and
without converting into CSV file.
Could you tell me please how can i do this
using PLSQl or SQL Loader.
Thnaks in Advance..As billy mentioned using ODBC interface ,the same HS service which is a layer over using traditional ODBC to access non oracle database.Here is link you can hit and trial and come out here if you have any problem.
http://www.oracle-base.com/articles/9i/HSGenericConnectivity9i.php[pre]
Khurram -
Unable to find file error while loading data from text file to Oracle
Hi,
I am having a interface where i am loading a data of Text file to Oracle.
But when i am trying to do this i am getting following error.
ODI-1227: Task SrcSet0 (Loading) fails on the source FILE connection SAPMM.
Caused By: java.sql.SQLException: File not found: d:/mdb/#General.get_filename
at com.sunopsis.jdbc.driver.file.FileResultSet.<init>(FileResultSet.java:160)
at com.sunopsis.jdbc.driver.file.impl.commands.CommandSelect.execute(CommandSelect.java:57)
at com.sunopsis.jdbc.driver.file.CommandExecutor.executeCommand(CommandExecutor.java:33)
SAPMM is connection name.
I am using get_filename to get the filename and it is fetching correct value as the this variable refreshes in previous step of this interface.
KM used for loading is File to SQL
What would be cause of this error?
Thanks,
MaheshHi,
Did a testing and following are the result
I have
A> created package having steps like
1. Declaration of variable v_filename.
2. Refreshing variable v_filename.
3. Execution of Interface which gets the file name from v_filename and load into target table
Package executes successfully.
B> created package having steps like
1. Declaration of variable v_filename.
2. Refreshing variable v_filename.
3. Scenario of Interface which gets the file name from v_filename and load into target table
Package executes with erre as it is not able to find the file
C> created package having steps like
1. Declaration of variable v_filename.
2. Refreshing variable v_filename.
3. Execution of Interface which gets the file name from v_filename and load into target table
4. Now create a scenario of the package , use the generated scenario in another package say main_package
Execution of main_package is successful.
Thanks,
Sutirtha -
Loading data from .csv file into Oracle Table
Hi,
I have a requirement where I need to populate data from .csv file into oracle table.
Is there any mechanism so that i can follow the same?
Any help will be fruitful.
Thanks and regardsYou can use Sql Loader or External tables for your requirement
Missed Karthick's post ...alredy there :)
Edited by: Rajneesh Kumar on Dec 4, 2008 10:54 AM -
How to export data from a Oracle table to a delimited file?
I know how to load delimited file into a table, but how to export
data from a Oracle table to a delimited file?
Thanks in advance.Try looking at this link, it's long but there's three different solutions discussed in it. If you look at Barbara Boehmer's
solution in her posts in the link below you'll see that she's addressed your concerns with spool files.
Re: utl_smtp and triggers -
How to load the data from .csv file to oracle table???
Hi,
I am using oracle 10g , plsql developer. Can anyone help me in how to load the data from .csv file to oracle table. The table is already created with the required columns. The .csv file is having about 10lakh records. Is it possible to load 10lakh records. can any one please tell me how to proceed.
Thanks in advance981145 wrote:
Can you tell more about sql * loader??? how to know that utility is available for me or not??? I am using oracle 10g database and plsql developer???SQL*Loader is part of the Oracle client. If you have a developer installation you should normally have it on your client.
the command is
sqlldrType it and see if you have it installed.
Have a look also at the FAQ link posted by Marwin.
There are plenty of examples also on the web.
Regards.
Al -
How to load the data from excel file into table in oracle using UTL_FI
How to load the data from excel file into table in oracle
and from table to excel file
using UTL_FILE package
Please give me some exampleThis is something i tried in oracle apex
http://avdeo.com/2008/05/21/uploading-excel-sheet-using-oracle-application-express-apex/
Regards,
CKLP -
Import data from a file into oracle db
Hello!
The problem is the following: data within a file must be placed
into several tables in a oracle server. For that a program has
to be written. It4s not done with executing a program cause the
data in the file can vary and depending on different flags the
import into oracle must be done. Now we tried the classes of
oo4o to access the db, but this only works for integer values,
the samples from oracle also only work for integer. We don4t
need to use oo40, is there a better / other way to write the
programm ? Has anybody a free sample ?
Thanxur problem is to import the data from file with different conditions which needs to be taken care programitically
Pls mail me your file and ur logic
my id is [email protected] -
Error while loading data from flat file to Oracle DB
I am new to ODI. I am trying to load data from a flat file to Oracle DB using the LKM File to Oracle (External Table) and using the IKM Oracle Incremental Update. I am getting the following exception during the "Create External Table" stage:
org.apache.bsf.BSFException: exception from Jython:
Traceback (most recent call last):
File "<string>", line 44, in <module>
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:462)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)
at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:931)
at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:481)
at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:205)
at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:548)
at oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:202)
at oracle.jdbc.driver.T4CStatement.executeForRows(T4CStatement.java:1110)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1488)
at oracle.jdbc.driver.OracleStatement.executeInternal(OracleStatement.java:2251)
at oracle.jdbc.driver.OracleStatement.execute(OracleStatement.java:2192)
at oracle.jdbc.driver.OracleStatementWrapper.execute(OracleStatementWrapper.java:347)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
java.sql.SQLException: java.sql.SQLException: ORA-30088: datetime/interval precision is out of range
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:322)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2473)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:48)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2913)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2625)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:561)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:464)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2093)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:366)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:300)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:292)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:855)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)
at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:83)
at java.lang.Thread.run(Thread.java:662)
Caused by: Traceback (most recent call last):
File "<string>", line 44, in <module>
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:462)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)
at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:931)
at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:481)
at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:205)
at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:548)
at oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:202)
at oracle.jdbc.driver.T4CStatement.executeForRows(T4CStatement.java:1110)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1488)
at oracle.jdbc.driver.OracleStatement.executeInternal(OracleStatement.java:2251)
at oracle.jdbc.driver.OracleStatement.execute(OracleStatement.java:2192)
at oracle.jdbc.driver.OracleStatementWrapper.execute(OracleStatementWrapper.java:347)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
java.sql.SQLException: java.sql.SQLException: ORA-30088: datetime/interval precision is out of range
at org.python.core.PyException.fillInStackTrace(PyException.java:70)
at java.lang.Throwable.<init>(Throwable.java:181)
at java.lang.Exception.<init>(Exception.java:29)
at java.lang.RuntimeException.<init>(RuntimeException.java:32)
at org.python.core.PyException.<init>(PyException.java:46)
at org.python.core.PyException.<init>(PyException.java:43)
at org.python.core.Py.JavaError(Py.java:455)
at org.python.core.Py.JavaError(Py.java:448)
at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java:177)
at org.python.core.PyObject.__call__(PyObject.java:355)
at org.python.core.PyMethod.__call__(PyMethod.java:215)
at org.python.core.PyMethod.instancemethod___call__(PyMethod.java:221)
at org.python.core.PyMethod.__call__(PyMethod.java:206)
at org.python.core.PyObject.__call__(PyObject.java:397)
at org.python.core.PyObject.__call__(PyObject.java:401)
at org.python.pycode._pyx1.f$0(<string>:50)
at org.python.pycode._pyx1.call_function(<string>)
at org.python.core.PyTableCode.call(PyTableCode.java:165)
at org.python.core.PyCode.call(PyCode.java:18)
at org.python.core.Py.runCode(Py.java:1204)
at org.python.core.Py.exec(Py.java:1248)
at org.python.util.PythonInterpreter.exec(PythonInterpreter.java:172)
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:144)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:322)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2472)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:47)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2913)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2625)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:558)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:464)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2093)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:366)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:300)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:292)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:855)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)
at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
... 1 more
Caused by: java.sql.SQLException: ORA-30088: datetime/interval precision is out of range
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:462)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)
at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:931)
at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:481)
at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:205)
at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:548)
at oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:202)
at oracle.jdbc.driver.T4CStatement.executeForRows(T4CStatement.java:1110)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1488)
at oracle.jdbc.driver.OracleStatement.executeInternal(OracleStatement.java:2251)
at oracle.jdbc.driver.OracleStatement.execute(OracleStatement.java:2192)
at oracle.jdbc.driver.OracleStatementWrapper.execute(OracleStatementWrapper.java:347)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java:175)
... 33 more
Could anyone please provide any pointers.
Thanks,
Srini.The code that is executed is as follows:
createTblCmd = r"""
create table ODITEMP.C$_0PARTNER
C1_C1 NUMBER(14),
C2_C2 VARCHAR2(12),
C3_C3 VARCHAR2(18),
C4_C4 NUMBER(7),
C5_C5 TIMESTAMP(11)
ORGANIZATION EXTERNAL
TYPE ORACLE_LOADER
DEFAULT DIRECTORY dat_dir
ACCESS PARAMETERS
RECORDS DELIMITED BY 0x'0D0A'
CHARACTERSET 'WE8ISO8859P1'
STRING SIZES ARE IN CHARACTERS
BADFILE 'partners.txt_%a.bad'
LOGFILE 'partners.txt_%a.log'
DISCARDFILE 'partners.txt_%a.dsc'
SKIP 0
FIELDS
MISSING FIELD VALUES ARE NULL
C1_C1 POSITION(1:14) ,
C2_C2 POSITION(15:26) ,
C3_C3 POSITION(27:44) ,
C4_C4 POSITION(45:51) ,
C5_C5 POSITION(52:62)
LOCATION ('partners.txt')
PARALLEL
REJECT LIMIT UNLIMITED
# Create the statement
myStmt = myCon.createStatement()
# Execute the trigger creation
myStmt.execute(createTblCmd)
myStmt.close()
myStmt = None
# Commit, just in case
myCon.commit() -
Create flat file from oracle table data
d_adp_num char(10)
d_schd_date char(8)
d_sched_code char(25)
d_pay_code char(50)
d_mil_start char(4)
d_mil_end char(4)
d_duration char(5)
d_site_code char(4)
d_dept_id char(6)
select payroll_id,
schedule_date,
reason_code ,(sched_code)
reason_code, (pay_code)
start_time,
end_time,
total_hours,
site_code,
department_id
from dept_staff
where schedule_date between (sysdate+1) and (sysdate+90)
loading some data instead for the date range.
sched_code - 'Unavailable' if reason_code = 'OD' and 'LA'
pay_code - 'BD Berevevement' if reason_code = 'BD'
'UP Unexcused PTO' if reason_code = 'UP'
'RG' if reason_code = 'SH'
'PTO' if reason_code = 'VA'
these are a few.....
start_time and end_time - convert into military time
based on start_ampm and end_ampm
Based on this, I need help to create a flat file. Attaching sample of flat file and data from dept_staff
If site_code is there then no need to get department_id( see sample flat file)
sample data for flat file
ZZW002324006072012 PTO
0800160008.00
ZZW002428106072012 RG
1015174507.50HM34
ZZW002391606072012 RG
1100193008.50
ZZW002430406072012 RG
1100193008.50 130000
dept_staff table data
PAYROLL_ID SCHEDULE_DATE REASON_CODE REASON_CODE_1 START_TIME START_AMPM END_TIME END_AMPM TOTAL_HOURS SITE_CODE DEPARTMENT_ID
ZZW0024468 6/8/2012 SH SH 730 A 400 P 850 12
ZZW0000199 6/8/2012 SH SH 730 A 400 P 850 14
ZZW0023551 6/8/2012 SH SH 1145 A 930 P 975 GH08 95
ZZW0024460 6/8/2012 SH SH 515 A 330 P 1025 GH08 95
ZZW0023787 6/8/2012 SH SH 630 A 300 P 850 24
ZZW0024595 6/8/2012 TR TR 730 A 400 P 850 90
ZZW0023516 6/8/2012 OD OD 800 A 400 P 800 95
ZZW0023784 6/8/2012 OD OD 800 A 400 P 800 5
ZZW0024445 6/8/2012 SH SH 1145 A 930 P 975 GH08 5
ZZW0024525 6/8/2012 OD OD 800 A 400 P 800 23
ZZW0024592 6/8/2012 TR TR 730 A 400 P 850 5
ZZW0024509 6/8/2012 SH SH 830 A 330 P 700 MK21 95
ZZW0023916 6/14/2012 SH SH 1100 A 730 P 850 27user_anumoses wrote:
Any examples, please provide? Thankshttp://www.lmgtfy.com/?q=oracle+utl_file+example
Handle: user_anumoses
Status Level: Newbie
Registered: Jun 9, 2009
Total Posts: 155
Total Questions: 60 (55 unresolved)
why so MANY unanswered questions? -
Load data from xml file in oracle data base
Hi all,
I'd like to know if is posible to load data from a file xml into a table of oracle data base through SQL*LOADER, loaded only in a normal column no with type XMLType , for example
I have a xml file
<person name="kate" surname="fari" city="new york" >
<son name="faus" age="18"/>
<son name="doly" age="10"/>
</person>
and I load in table :
table :person
column
name surname city
kate fari new york
table : son
name age
doly 10
faus 18
thank you for your return !!!!!!!!!
Ninova
Edited by: user10474037 on 30 mai 2011 08:47
Edited by: user10474037 on 30 mai 2011 08:48
Edited by: user10474037 on 30 mai 2011 08:48
Edited by: user10474037 on 30 mai 2011 08:49
Edited by: user10474037 on 30 mai 2011 08:50Hi
This May be found at
SQL Loader to upload XML file -
How do you import data base dmp file in oracle 10g
How do you run data base dmp file in oracle 10g
Examples..
Table Exports/Imports
The TABLES parameter is used to specify the tables that are to be exported. The following is an example of the table export and import syntax:
expdp scott/tiger@db10g tables=EMP,DEPT directory=TEST_DIR dumpfile=EMP_DEPT.dmp logfile=expdpEMP_DEPT.log
impdp scott/tiger@db10g tables=EMP,DEPT directory=TEST_DIR dumpfile=EMP_DEPT.dmp logfile=impdpEMP_DEPT.log
For example output files see expdpEMP_DEPT.log and impdpEMP_DEPT.log.
The TABLE_EXISTS_ACTION=APPEND parameter allows data to be imported into existing tables.
Schema Exports/Imports
The OWNER parameter of exp has been replaced by the SCHEMAS parameter which is used to specify the schemas to be exported. The following is an example of the schema export and import syntax:
expdp scott/tiger@db10g schemas=SCOTT directory=TEST_DIR dumpfile=SCOTT.dmp logfile=expdpSCOTT.log
impdp scott/tiger@db10g schemas=SCOTT directory=TEST_DIR dumpfile=SCOTT.dmp logfile=impdpSCOTT.log
For example output files see expdpSCOTT.log and impdpSCOTT.log.
Database Exports/Imports
The FULL parameter indicates that a complete database export is required. The following is an example of the full database export and import syntax:
expdp system/password@db10g full=Y directory=TEST_DIR dumpfile=DB10G.dmp logfile=expdpDB10G.log
impdp system/password@db10g full=Y directory=TEST_DIR dumpfile=DB10G.dmp logfile=impdpDB10G.log -
Import data from oracle database table into csv file
Hi
I have to import data from a table into a csv file. Could anyone suggest the best method to do it? My application is JSP as frontend and have put business logic in servlet.
Thanks in advance.FastReader from wisdomforce will help you quickly export data into csv file. http://www.wisdomforce.com
fastreader can be called and executed as an external process ( Runtime.exec(..) ) to extract data from Oracle tables into flat file
Maybe you are looking for
-
Frustration has sunk in. . .CSS in Dreamweaver help needed!
I just took over a website that was previously built. When trying to update I really messed it up> I am not that familiar w/ CSS and am attempting to learn . . . My problem is the background on the page should go down to the footer (leaving the foote
-
how to convert an excel file to a fillable pdf?
-
TOC navigation controls - random behavior
My landscape-only book is structured in iBooks Author as a Preface followed by a sequence of Sections. The result works fine, including the TOC, which consists of nothing but a horizontal scrolling set of thumbnail page images. However, after I use t
-
Posting only posisble error in periods 2009/08 and 2009/07 in company code
Hi Experts, When my user do GI for this month he got error as mentioned below, Posting only possible error in periods 2009/08 and 2009/07 in company code Already i have done it but still am not confident. Also this particular corrections i need to do
-
Change Layout in ScrollContainer
Hi, I would like to change dynamically the layout of a ScrollContainer that I created dynamically: IWDScrollContainer shlpcontainer = (IWDScrollContainer)view.createElement(IWDScrollContainer.class, "name"); I would like to set the layout to GridLayo