Urgent ! Populate values into Attribute from ODS

Hie,
I have made 0SALES_DIST as a attribute of 0DOC_NUMBER
0SALES_DIST & 0DOC_NUMBER is currently in Sales Item ODS and is retrieved via standard data source
Although both values of 0SALES_DIST & 0DOC_NUMBER exist independantly in the ODS, I would like to make 0SALES_DIST as attribute of 0DOC_NUMBER
I attempted to create a Update Rule from the Sales Item ODS to feed 0DOC_NUMBER attribute - 0SALES_DIST.
However when I load the data, 6000 over records were transferred but NONE added hence I still do NOT see the values of 0SALES_DIST populated in the Master Data of 0DOC_NUMBER
Please advice if there is any other option to do this.
I was thinking I write a Routine in the UR of ODS to the Cube and push the data to the Master Data of 0DOC_NUMBER.
However, I do NOT know how to write the Routine

Dear Chris
I could not able to understand why you are attempting to create attribute in Update rule in this scenario.
If you want 0SALES_DIST as attribute of 0DOC_NUMBER.
Load master data for 0SALES_DIST separately.
Before mention this as navigation attribute in 0DOC_NUMBER.
Make a Try....
Friends let me correct. if i am wrong.
Regards
Raju Saravanan

Similar Messages

To populate values into single field in an internal table

Hi Friends,
How we need to populate values into single field in an internal table.
E.g itab consits of single field ( name)
       i need to assign values to this field name .like
      peter,
      john,
      abrahm,
      daneyal
Pls tell me i how i need to code for this
Thanks ,
Parnith

Hi,
Please look at the below code :
DATA : BEGIN OF itab OCCURS 0 ,
         name(20) TYPE c,
       END OF itab.
START-OF-SELECTION.
itab-name = 'Peter'.
APPEND itab.
CLEAR itab.
itab-name = 'John'.
APPEND itab.
CLEAR itab.
itab-name = 'Abrahm'.
APPEND itab.
CLEAR itab.
itab-name = 'Daneyal'.
APPEND itab.
CLEAR itab.
LOOP AT itab.
    WRITE : / itab.
ENDLOOP.
Thanks,
Sriram Ponna.

How to passing value into Captivate from html?

How to passing value into Captivate from html?
Or
How to communicate between objects in one slides?

Hi czhao0378 and welcome to the forums!
Captivate does not natively allow you to communicate your own
data, either internally or externally. The only way to make this
happen is to create your own functionality, either via custom-built
Flash objects or JavaScript code executed in the browser or a
combination of both.
The only example I've seen of any "data passing" inside
Captivate is a custom text input/output solution that was posted on
the Captivate Developer Exchange:
http://www.adobe.com/cfusion/exchange/index.cfm?event=extensionDetail&loc=en_us&extid=1253 021
This solution consists of an input box that takes information
from the user on one slide and a second box that displays that
information on another slide. The functionality was built in Flash
and is embedded in Captivate as a Flash "animation". Unfortunately,
since this is a custom functionality, the information is not
included in the user completion results Captivate can pass to a
Learning Management System.
Since the solution mentioned above relies on a Flash
Actionscript variable to hold the information that is displayed,
you can also pass the information from HTML to Captivate using the
"SetVariable" command in JavaScript. This would at least allow you
to display your own HTML-based data inside Captivate.
Beyond that, I'm not aware of any other way to gather and
pass data in Captivate.

Loadin Master data Attribute from ODS

Hi experts,
I have a Master data as Infoprovider:
CASE with attributes at1 and at2.
I loading master data.
Another infoArea, I have and ODS ( case, field1, field2) that is loading with DELTA.
After loading the delta, I want to update the AT2 from CASE master data.
Which is the best option to loading an attribute from ODS? FULL? DELTA? What happend if the duplicate key error appears??
I believe that with a DELTA Update from ODS to CASE will not be an error.
thanks a lot!

Hi,
I dont think so there sould be problem in further update from ODS to Attribute.
It would be better to keep the Delta in Further update.
Regards,
Sharayu

How to populate values into a Listbox on selection screen

Hi All,
Please any one let me know how to populate values (for ex.01,02 and 03) in a list box of selection screen..
Thanks,
Vijay

Try this code ...
REPORT ZLISTBOX.
TYPE-POOLS: VRM.
TABLES SPFLI.
TABLES SSCRFIELDS.
DATA flag.
DATA: NAME TYPE VRM_ID,
LIST TYPE VRM_VALUES,
VALUE LIKE LINE OF LIST.
PARAMETERS PS_PARM LIKE SPFLI-CARRID AS LISTBOX VISIBLE LENGTH 5
USER-COMMAND fcodex.
data: i_spfli type spfli occurs 0 with header line.
PARAMETERS PQ_PARAM LIKE SPFLI-connid AS LISTBOX VISIBLE LENGTH 15
USER-COMMAND
fcodey.
*DS AS CHECKBOX USER-COMMAND FLAG.
INITIALIZATION.
NAME = 'PS_PARM'.
DATA T TYPE I VALUE 0.
SELECT DISTINCT carrid into corresponding fields of table i_spfli FROM
SPFLI.
loop at i_spfli.
VALUE-KEY = i_spfli-CARRID.
VALUE-TEXT = i_spfli-CARRID.
APPEND VALUE TO LIST.
endloop.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
ID = NAME
VALUES = LIST.
AT SELECTION-SCREEN.
if sy-ucomm eq 'FCODEX'.
REFRESH LIST.
CLEAR LIST.
PQ_PARAM = ' '.
NAME = 'PQ_PARAM'.
SELECT * FROM SPFLI WHERE CARRID = PS_PARM.
VALUE-KEY = SPFLI-connid.
VALUE-TEXT = SPFLI-connid.
APPEND VALUE TO LIST.
ENDSELECT.
endif.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF SY-UCOMM NE 'FCODEX' OR SY-UCOMM NE 'FCODEY'.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
ID = NAME
VALUES = LIST.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
START-OF-SELECTION.
clear i_spfli.
refresh i_spfli.
select * into table i_spfli from spfli where carrid = ps_parm and connid
= pq_param.
loop at i_spfli.
WRITE: / 'CITY FROM:', I_SPFLI-CITYFROM, 'CITY TO :',I_SPFLI-CITYTO,
'DEPARTURE TIME :', I_SPFLI-DEPTIME.
ENDLOOP.

Import text values into Attribute ( Edit---- Text)

Dear MDM Gurus,
Kindly let me know how to import Text values into the Text Value of a ttribute.
If we get into Data Manager ---> Taxonomy Mode ---> attribute -
> Text Value -
> right click to get the "Edit Text".
Believe the TEXT can old more info than the TEXT Value itself.
Appreciate any inputs.
Thanks.
Hari
Message was edited by:
Guest 001

Guys,
Any inputs appreciated.
Pls treat this as urgent.
Thanks.
Hari

Populate value into dropdownlist

Is it possible to populate value of a dropdownlist?
I will want what is inside my dropdownlist to have values according to this SQL statement.
Select distinct PROGRAM_ID from ZPROGRAM_TABLE
How am I suppose to do this? Any codes example?

I got an error when I put this codes:
data: itab type standard table of ZPROGRAM_TABLE WITH HEADER LINE,
wa_itab type ZPROGRAM_TABLE.
DATA : K TYPE I VALUE 1.
START-OF-SELECTION.
CALL SCREEN 1000.
MODULE STATUS_1000 OUTPUT
MODULE STATUS_1000 OUTPUT.
SET PF-STATUS 'SCREEN_1000'.
SET TITLEBAR 'TITLE_1000'.
select DISTINCT PROGRAM_ID from ZPROGRAM_TABLE
into table itab.
loop at itab.
clear wa_itab.
wa_itab-PROGRAM_ID = K .
wa_itab-PROGRAM_CODE = itab-PROGRAM_CODE.
append wa_itab to itab.
K = K + 1.
endloop.
call function 'VRM_SET_VALUES'
exporting
id = 'ZDROPDOWNLIST' "Here use your input box name in which you need dropdown
values = itab
exceptions
id_illegal_name = 1
others = 2.
ENDMODULE. "STATUS_1000 OUTPUT
Here is the link of how the error look like:
http://img529.imageshack.us/img529/9650/screenee6.png
Can someone tell me how to solve it and where is the error?

Inserting the column values into table from view through procedure!!!

below is my example code
Create or replace procedure test_proc
is
cursor test_cur is
select a.col1 , b.col2, c.col3, d.col4, e.col5
from tableA a, tableB b, tableC c, tableD d, tableE e;
test_cur_rec test_cur%rowtype;
Begin
insert into test_stg ( col1, col2, col3, col4, col5, col6, col7)
Values ( test_cur_rec. col1,
test_cur_rec .col2,
test_cur_rec .col3,
test_cur_rec .col4,
test_cur_rec .col5
-- col6, col7 );
create view test2 (
select f.col6, g.col7 from tableF f,tableG g);
I m trying to insert values into the table test_stg but for col6 and col7 i need to get the data from the view test2.
In simple word, all i need to do is get the 2 columns data from view and insert into a table through procedure. The above code is the example which looks very much like my actual code.
How do i accomplish this task ??

well there is joining condition for a, b,c ,d, e tables, i have not mentioned here. The where condition has nothing to do with the other two columns of the view.
There is no relation ship between the these tables the view. The col 6 and 7 i m inserting from view is sysdate timestamp and the job_id number.
so its pretty straight forward insertion into the table from view columns. These two columns has just one row with id number and timestamp. so i need to insert these data into the the table when i run a procedure.
Thank you so much!!!

How to populate value into textboxes

Hi,
I'm working with oracle forms for portlet and need help populating a certain value into textboxes. There are 40 textboxes, 40 checkboxes, and a textbox for a user to enter a value. When a user checks the preferred checkboxes then enters the value into the textbox, I want this value to be populated into those 40 textboxes.
Please help...
Thx in advance,
Thuly2

Hi Adi
If ZVal is your value node then,
DATA: lref_entity    TYPE REF TO cl_bsp_wd_value_node,
        lref_bo_coll   TYPE REF TO if_bol_bo_col,
        lref_data TYPE REF TO <<your ZStructure>>,
         ls_data type <<your ZStructure>>.
ls_data-<<field1>> = 'XYZ'
ls_data-<<field2>> = 'XYZ'
     CREATE OBJECT lref_bo_coll TYPE cl_crm_bol_bo_col.
      CREATE DATA lref_data.
      CREATE OBJECT lref_entity
        EXPORTING
          iv_data_ref = lref_data.
      lref_entity->set_properties( ls_data ).
      lref_bo_coll->add( lref_entity ).
      typed_context->ZVal->set_collection( lref_bo_coll ).
Hope this was helpful.
Best Regards,
Lakshminarayana

Saving values into table from Interactive Form

Hallo together,
iam trying to do the example "Include Tables" (SAP Interactive Forms by Adobe - Galileo Press).
It works, but not as described. When i want to change data in the interactive_forms ui element and press the webdynpro native button send, the value at the webdynpro table does not change. When i change the value at the webdynpro table and press the send button at the form or change the line at the webdynpro, the value in the adobe formular changes too. Thats one problem.
The other problem is that i want to save the changed/added data from the formular at the database. What to do? The form layout is "ZCI Layout" and i added the script:
DO NOT MODIFY THE CODE BEYOND THIS POINT - 800.20070708051308.406522.403406 - ContainerFoundation_JS
I also added this into "wddomodifyview":
METHOD wddomodifyview .
DATA: lr_interactive_form TYPE REF TO cl_wd_interactive_form,
             lr_method_handler TYPE REF TO if_wd_iactive_form_method_hndl.
CHECK first_time = abap_true.
lr_interactive_form ?= view->get_element( 'FORM' ).
lr_method_handler ?= lr_interactive_form->_method_handler.
lr_method_handler->set_legacy_editing_enabled( abap_true ).
ENDMETHOD.
I selected also:
execute at: "Server and Client"
I dont know what to do anymore.
Best regards
Philip

Hi,
To make an input enabled table. I would suggest to use TABLE element from the PDF library and then binding the columns from your context.
Step 1: Library -> Standard ->Table
Select create using assistance.
Select body rows vary depending on data .
Select number of Columns in your case it will be 4.
Then proceed further and finish as per your need.
Step 2:
Select a table Column .
Select Pallets->Object then chnage the cell type from Text to text field.
Then click on binding tab and bind it to the respective field from hierarchy.
Select upgrade the following properties radio button and check only "default value" option.
This will create binding something like this $record.SCARR.DATA[*].CARRID
Follow this for all other columns.
Step 3:
Now create a button in the View holding your form(you can also use SUBMIT button of form). On action event of this button right the following code to get all the changed values from Table.
data lt_scarr type wd_this->elements_scarr.
call method lo_nd_scarr->get_static_attributes_table
    importing
      table = lt_scarr.
LT_SCARR will contain all the new values from Form. Then use this table to update ur database table.
Thanks,
Abhishek

How to populate values into DFF

hi all
kindly tell me how to create a LOV for a DFF field based on some other field in the form?
for ex:
i created a DFF to catch supplier site based on supplier name entered in the form , how to correlate both?
kindly answer
--regards
--raj

Hi Ghattamaneni,
Issue resolved?
if not, try with this.
Create a Value set based on suppplier name to get supplier site.
then go to DFF.
either Sys Admin/Application/DFF or AP/Set-up/DFF.
Then create DFF with Context Prompt or with context.
add the attributes and add Value set to each attribute.
try with this.
--Basava.S

Passing dynamic value into HTML from webforms

We're setting up an imaging application on the web, and I need the ability to read an image path from the database with forms (or a stored PL/SQL procedure I can call from forms), and have that open an HTML file in a web browser and pass it the name of the file I need opened. The HTML file is mostly static, but needs to accept the filename parameter at runtime.

For our application, we're using an image viewer called Spicer Image a.X 7.20 for the web.
What I had to do was build a procedure named web_image in pl/sql to be called from a webform with web.show_document('server/pls/portal30/web_image?filename_in='||<oracle_file_id>,'_blank')
That call worked just fine and I get a new instance of the web browser with the HTML I set up in my web_image procedure.
Here's the procedure.
create or replace procedure web_image(filename_in varchar) as
begin
htp.p('<HTML>');
htp.p('<HEAD>');
htp.p('<TITLE>AEC Web Image Integration</TITLE>');
htp.p('</HEAD> ');
htp.p(' <BODY>');
htp.p('');
htp.p('<OBJECT');
htp.p(' CLASSID="clsid:1120C1B3-8768-11D1-8108-020701190C00"');
htp.p(' ID="SpicerViewControl"');
htp.p(' ALIGN="center" WIDTH="800" HEIGHT="500" BORDER="0" VSPACE="0" HSPACE="0">');
htp.p('</OBJECT> ');
htp.p('');
htp.p('<OBJECT');
htp.p(' CLASSID="clsid:895CDC65-8837-11D1-8109-020701190C00"');
htp.p(' ID="SpicerDocumentControl"');
htp.p(' ALIGN="center" WIDTH="1" HEIGHT="1" BORDER="0" VSPACE="0" HSPACE="0">');
htp.p('</OBJECT> ');
htp.p('');
htp.p('<SCRIPT LANGUAGE="JavaScript">');
htp.p('  ');
htp.p(' </SCRIPT>');
htp.p(' </BODY>');
htp.p(' </HTML>');
end;

How to populate value node with values?

Hi Experts,
I have created a new view with a vlaue node of table type.
How can I populate values into the value node?
Which method will be useful?
Is there any material for Web UI Programing?
Please help me in this.
Thanks,
Adi.

Hi Adi
If ZVal is your value node then,
DATA: lref_entity    TYPE REF TO cl_bsp_wd_value_node,
        lref_bo_coll   TYPE REF TO if_bol_bo_col,
        lref_data TYPE REF TO <<your ZStructure>>,
         ls_data type <<your ZStructure>>.
ls_data-<<field1>> = 'XYZ'
ls_data-<<field2>> = 'XYZ'
     CREATE OBJECT lref_bo_coll TYPE cl_crm_bol_bo_col.
      CREATE DATA lref_data.
      CREATE OBJECT lref_entity
        EXPORTING
          iv_data_ref = lref_data.
      lref_entity->set_properties( ls_data ).
      lref_bo_coll->add( lref_entity ).
      typed_context->ZVal->set_collection( lref_bo_coll ).
Hope this was helpful.
Best Regards,
Lakshminarayana

Lost Decimal Places when extracting value from ODS into Cube

Hi,
In short, we wish to transfer data from an ODS to a custom cube. One of the Key Figures is becoming an integer in the process.
Both the ODS and Cube use the same InfoObject which is defined as a Number with a Data Type of FLTP.
If I set a break-point in the update rules, I can see that it is reading the value into the communication structure correctly. Yet, when I browse the data in the Cube, it seems to have lost the decimal places in the update.
More details:
We have a custom ODS and cube which needs to store a Unit Price to four decimal places. In creating the InfoObject for Unit Price, we could not use a Data Type of Currency (Type = Amount) as this is limited to 2 decimal places.
Instead, I used a Data Type of FLTP (Floating Point) and a type of Number. All decimal places are loading correctly into the ODS, but are being lost when transferred to Cube.
Many thanks
Adrian

Hi Simon and Emmanuel,
Thanks for the suggestions.
Unfortunately the Query is returning the same integers as LISTCUBE.
Also, my key figure has the same definition in both the ODS and cube (uses the same InfoObject), and there is no transformation - just transfer.
I'd prefer not to create another currency. It could get a bit messy if I'm having to include the figure in calculation with other figures that use the real currency.
I had thought of making the key figure a standard type of Currency and multiplying the value by 100 before storing them in the cube - then I would simply divide the figures by 100 in the query. But again, not ideal.
I have logged a OSS note with SAP to see if there is any known issue with transferring a floating point number between the ODS and Cube.
Thanks
Adrian

Inserting a Value into otherTable using an App. Proc. from a Date Picker

I'm trying to call an Application Process that will insert an Attribute of a Row, into another table, after selecting a date from a Date Picker cell.
I don't know why this shouldn't be possible. I think I've got all of my "Ducks in a Row", so to speak,
but the Value that is being inserted into the other table is this:.. [object HTMLTableCellElement]
(Ultimately, I'd like my Application Process to include Page element values with the insert as well, but I'm trying to handle one problem at a time)
Here's a list of all the steps I've covered:
1. I've Created an Application Process, (popDevices). The Process Point is "On-Demand". The Type is "PL/SQL Anonymous Block".
The Process is defined as such:
BEGIN
Insert into P_DEVICES
NAME,
IP_ADDRESS,
MODEL
) values
'Unassigned',
'Unassigned',
:P153_MODEL
COMMIT;
END;
2. I've Included the Javascript in the Page HTML Header.
The Javascript is written as such: (minus the tags)
function popDevices(PART_NO)
var get = new htmldb_Get(null,$x('pFlowId').value,'APPLICATION_PROCESS=popDevices',0);
get.add('P153_MODEL',PART_NO);
gReturn = get.get();
get = null;
3. I've included the following in the "Element Attributes" field of the Date-Picker Item (Date_Delivered).
The Region Type is "SQL Query (Updatable Report)"
onChange="javascript:popDevices(PART_NO);"
THE RESULTS
A. A row does get inserted into the other (P_Devices) table,
But the value of the Attribute from the Page Region is not valid.
The Inserted value is this: [object HTMLTableCellElement]
B. I have tried Every conceivable combination of characters in the "Element Attributes" field, such as:
...(PART_NO), (#PART_NO#), (||PART_NO||), (+PART_NO+)
C. The Javascript in the Page HTML Header appears to be correct, since I have written it this same way for other applications without any problems.
D. If this simply cannot be done by referencing the "onChange" Javascript from the "Element Attributes" field,
Then can you help me to write the code into the Select statement of the region.
Thanks for any help you can give me.
-Gary

This may not be the most direct approach to the solution. But, none the less, it is a solution.
For those other novices, like myself, I hope this can be useful at some point in your development:
MY DESIRED RESULT:
A. To Insert into another tablle values derived from both; Page Item (i.e. P153_x) and Attributes of a Row in an Updatable Report from which I have selected the Date-Picker.
B. I want the insert to occur automatically after the user Selects the date from the Date-Picker.
SOLUTIONS:
1. I usea Javascript prompt window to prompt for information and store the information in Pre-Created Page Items.
This is the Javascript as I've entered it into the Page HTML Header region: (Minus the Tags)
function received_javaprompt () {
var Serial_Number = prompt("Enter the Serial Number");
var Bldg_Id = prompt("Enter the Bldg_Id");
var Clst_Id = prompt("Enter the Clst_Id");
$x('P153_SERIAL_NO').value = Serial_Number;
$x('P153_BLDG_ID').value = Bldg_Id;
$x('P153_CLST_ID').value = Clst_Id;
2. I needed to identify the (Manufacturer and Part_No) Column Attribute in the Row from which I selected the Date-Picker.
A. To do this, I enumerated the Columns in the order they were listed in the Select Statement of the region (Click on the Region Definition Tab).
B. Then (Click on the Report Attributes Tab). Count, In the numerical order which these columns are selected, ONLY the columns that are Editable.
C. When I counted down as far as the Column I wanted to capture the value of, Then I made a mental note of that number and used it in the following (2) Javascripts (findMaker and findModel).
3. findMaker (Minus the tags)
function findMaker (pThis) {
var vRow = pThis.id.substr(pThis.id.indexOf('_')+1);
var Maker = html_GetElement('f15_'+vRow).value
$x('P153_MAKER').value = Maker;
4. findModel (Minus the tags)
function findModel (pThis) {
var vRow = pThis.id.substr(pThis.id.indexOf('_')+1);
var Model = html_GetElement('f16_'+vRow).value
$x('P153_MODEL').value = Model;
5. I added one more Javascript, to the Page HTML Header, that references the Application Process which will Insert the values into the "Other" table:
function popDevices(P153_SERIAL_NO,P153_BLDG_ID,P153_CLST_ID,P153_MAKER,P153_MODEL)
var get = new htmldb_Get(null,$x('pFlowId').value,'APPLICATION_PROCESS=popDevices',0);
get.add('P153_SERIAL_NO',P153_SERIAL_NO);
get.add('P153_BLDG_ID',P153_BLDG_ID);
get.add('P153_CLST_ID',P153_CLST_ID);
get.add('P153_MAKER',P153_MAKER);
get.add('P153_MODEL',P153_MODEL);
gReturn = get.get();
get = null;
6. I added the "onChange" process to the Element Attributes field of the Table item which utilizes the Date-Picker:
A. Click on the Report Attributes Tab of the Region.
B. Click on the Edit icon of the column which utilized the Date-Picker
C. I added this "onChange" reference to the Element Attributes field, which is found in the Tabular Form section.
onChange="javascript:received_javaprompt();findModel(this);findMaker(this);popDevices((P153_SERIAL_NO).value,(P153_BLDG_ID).value,(P153_CLST_ID).value,(P153_MAKER).value,(P153_MODEL).value);"
7. The Application Process which inserts the collected data into the table is as follows:
(Name= popDevices: Process Point= On-Demand: Type= PL/SQL Anonymous Block)
BEGIN
Insert into P_DEVICES
BLDG_ID,
CLST_ID,
NAME,
IP_ADDRESS,
SERIAL_NO,
MAKER,
MODEL
) values
:P153_BLDG_ID,
:P153_CLST_ID,
'Unassigned',
'Unassigned',
:P153_SERIAL_NO,
:P153_MAKER,
:P153_MODEL
COMMIT;
END;
Well, I hope this may help someone else like me.
I usually arrive at my solutions by getting help here on the Discussion Forum and also Google. Google inevitably points me to a previous Apex Discussion Forum session.
Edited by: garyNboston on Mar 15, 2010 10:55 AM

Urgent ! Populate values into Attribute from ODS

Similar Messages

Maybe you are looking for