Urgent!!!!Regarding Workflow mailer of iStore
Hi All,
I need to modify the body content of iStore user registration workflow email .
I tried to modify the file IBENOTIF,then after I generated email from istore, then it showed the old format..
How can I get new format of body content of email?
Please let me know is there any steps if I am missing?
Thanks
HTH
This can be achieved as below:
1. Create new message in IBENOTIF workflow. The id of this message should be prefixed by ACCTREG. As an example, the id could be ACCTREGB2B_MSG1. (Can't remember the exact details on prefix, search metalink)
2. Using iStore Administrator, modify the "User Registration" notification to create a mapping of user type with your new message. Please note that your message will appear in this list only if it conforms to the naming convention described in step 1.
It has been some time back I tried this so some of the information mentioned here might be incorrect. Please try and see.
Regards,
Gautam
Similar Messages
-
Regarding Workflow mailer error
Hi
Could anyone teach me how to troubleshooting these errors in log of mailer?
My customer made mailer available through OAM and could send notification.
However, a lot of errors were found in log of mailer.
Quote
[Nov 7, 2011 8:33:55 PM JST]:1320665635770:-1:-1:svdbdc006:10.140.102.13:-1:-1:1:20420:SYSADMIN(0):-1:Thread[BES Dispatch Thread,5,main]:10.140.102.13:73020:1320665633553:10:EXCEPTION:[SVC-GSM-WFALSNRSVC-133833 : oracle.apps.fnd.cp.gsc.SvcComponentContainer.onBusinessEvent(BusinessEvent)]:Successfully handled component event, oracle.apps.fnd.cp.gsc.SvcComponent.start, for component 10011
[Nov 7, 2011 8:33:54 PM JST]:1320665634490:-1:-1:svdbdc006:10.140.102.13:-1:-1:1:20420:SYSADMIN(0):-1:Thread[inboundThreadGroup1,5,inboundThreadGroup]:10.140.102.13:73020:1320665634490:11:ERROR:[SVC-GSM-WFALSNRSVC-133833-10005 : oracle.apps.fnd.wf.bes.AgentListenerProcessor.read()]:10consecutive errors occurred
[Nov 7, 2011 8:33:57 PM JST]:1320665637002:-1:-1:svdbdc006:10.140.102.13:-1:-1:1:20420:SYSADMIN(0):-1:Thread[inboundThreadGroup1,5,inboundThreadGroup]:10.140.102.13:73020:1320665634490:11:ERROR:[SVC-GSM-WFALSNRSVC-133833-10005 : oracle.apps.fnd.cp.gsc.Processor.performError(ProcessorException)]:Maximum number of errors have occurred for this processing thread.
<af type="tenured" id="106" timestamp="Nov 07 20:33:58 2011" intervalms="3796.734">
<minimum requested_bytes="98320" />
<time exclusiveaccessms="0.032" meanexclusiveaccessms="0.032" threads="0" lastthreadtid="0x3225CB00" />
<refs soft="399" weak="183" phantom="0" dynamicSoftReferenceThreshold="9" maxSoftReferenceThreshold="32" />
<tenured freebytes="0" totalbytes="18192896" percent="0" >
<soa freebytes="0" totalbytes="18192896" percent="0" />
<loa freebytes="0" totalbytes="0" percent="0" />
</tenured>
<gc type="global" id="106" totalid="106" intervalms="3796.788">
<expansion type="tenured" amount="3553280" newsize="21746176" timetaken="0.000" reason="insufficient free space following gc" />
<finalization objectsqueued="27" />
<timesms mark="22.192" sweep="0.514" compact="0.000" total="23.115" />
<tenured freebytes="6622496" totalbytes="21746176" percent="30" >
<soa freebytes="6405408" totalbytes="21529088" percent="29" />
<loa freebytes="217088" totalbytes="217088" percent="100" />
</tenured>
</gc>
<tenured freebytes="6524176" totalbytes="21746176" percent="30" >
<soa freebytes="6383376" totalbytes="21605376" percent="29" />
<loa freebytes="140800" totalbytes="140800" percent="100" />
</tenured>
<refs soft="214" weak="167" phantom="0" dynamicSoftReferenceThreshold="9" maxSoftReferenceThreshold="32" />
<time totalms="23.241" />
</af>
[Nov 7, 2011 8:34:29 PM JST]:1320665669022:-1:-1:svdbdc006:10.140.102.13:-1:-1:1:20420:SYSADMIN(0):-1:Thread[ComponentMonitor,5,main]:10.140.102.13:73020:1320665606034:1:EXCEPTION:[SVC-GSM-WFALSNRSVC-133833 : oracle.apps.fnd.cp.gsc.SvcComponentMonitor.startAutomaticComponents()]:Starting automatic component 10005
[Nov 7, 2011 8:34:36 PM JST]:1320665676474:-1:-1:svdbdc006:10.140.102.13:-1:-1:1:20420:SYSADMIN(0):-1:Thread[BES Dispatch Thread,5,main]:10.140.102.13:73020:1320665676474:12:EXCEPTION:[SVC-GSM-WFALSNRSVC-133833 : oracle.apps.fnd.cp.gsc.SvcComponentContainer.onBusinessEvent(BusinessEvent)]:(BusinessEvent{name=oracle.apps.fnd.cp.gsc.SvcComponent.start, key=SVC:07-NOV-2011, priority=50, correlationId=null, sendDate=Mon Nov 07 20:34:29 JST 2011, receiveDate=null, From Agent: , To Agent: , Last Subscription= , Error Message=null, Error Stack=null, CONTAINER_TYPE=GSM, CONTAINER_PROCESS_ID=133833, COMPONENT_ID=10005, [email protected], BES_PAYLOAD_OBJECT=false})
[Nov 7, 2011 8:34:46 PM JST]:1320665686481:-1:-1:svdbdc006:10.140.102.13:-1:-1:1:20420:SYSADMIN(0):-1:Thread[BES Dispatch Thread,5,main]:10.140.102.13:73020:1320665676474:12:EXCEPTION:[SVC-GSM-WFALSNRSVC-133833 : oracle.apps.fnd.cp.gsc.SvcComponentContainer.handleComponentEvent(int, String, String)]:Successfully retrieved component details from the database
[Nov 7, 2011 8:34:46 PM JST]:1320665686614:-1:-1:svdbdc006:10.140.102.13:-1:-1:1:20420:SYSADMIN(0):-1:Thread[BES Dispatch Thread,5,main]:10.140.102.13:73020:1320665676474:12:EXCEPTION:[SVC-GSM-WFALSNRSVC-133833 : oracle.apps.fnd.cp.gsc.SvcComponentContainer.onBusinessEvent(BusinessEvent)]:Successfully handled component event, oracle.apps.fnd.cp.gsc.SvcComponent.start, for component 10005
[Nov 7, 2011 8:34:46 PM JST]:1320665686772:-1:-1:svdbdc006:10.140.102.13:-1:-1:1:20420:SYSADMIN(0):-1:Thread[inboundThreadGroup1,5,inboundThreadGroup]:10.140.102.13:73020:1320665686772:13:ERROR:[SVC-GSM-WFALSNRSVC-133833-10005 : oracle.apps.fnd.wf.bes.AgentListenerProcessor.read()]:10consecutive errors occurred
[Nov 7, 2011 8:34:46 PM JST]:1320665686812:-1:-1:svdbdc006:10.140.102.13:-1:-1:1:20420:SYSADMIN(0):-1:Thread[inboundThreadGroup1,5,inboundThreadGroup]:10.140.102.13:73020:1320665686772:13:ERROR:[SVC-GSM-WFALSNRSVC-133833-10005 : oracle.apps.fnd.cp.gsc.Processor.performError(ProcessorException)]:Maximum number of errors have occurred for this processing thread.
[Nov 7, 2011 8:35:29 PM JST]:1320665729053:-1:-1:svdbdc006:10.140.102.13:-1:-1:1:20420:SYSADMIN(0):-1:Thread[ComponentMonitor,5,main]:10.140.102.13:73020:1320665606034:1:EXCEPTION:[SVC-GSM-WFALSNRSVC-133833 : oracle.apps.fnd.cp.gsc.SvcComponentMonitor.startAutomaticComponents()]:Starting automatic component 10005
<af type="tenured" id="107" timestamp="Nov 07 20:35:36 2011" intervalms="98237.510">
<minimum requested_bytes="98320" />
<time exclusiveaccessms="0.024" meanexclusiveaccessms="0.024" threads="0" lastthreadtid="0x330E6900" />
<refs soft="483" weak="329" phantom="0" dynamicSoftReferenceThreshold="9" maxSoftReferenceThreshold="32" />
<tenured freebytes="0" totalbytes="21746176" percent="0" >
<soa freebytes="0" totalbytes="21605376" percent="0" />
<loa freebytes="0" totalbytes="140800" percent="0" />
</tenured>
<gc type="global" id="107" totalid="107" intervalms="98237.593">
<expansion type="tenured" amount="1048576" newsize="22794752" timetaken="0.000" reason="insufficient free space following gc" />
<finalization objectsqueued="25" />
<timesms mark="20.137" sweep="0.800" compact="0.000" total="21.178" />
<tenured freebytes="6998816" totalbytes="22794752" percent="30" >
<soa freebytes="6623520" totalbytes="22419456" percent="29" />
<loa freebytes="375296" totalbytes="375296" percent="100" />
</tenured>
</gc>
<tenured freebytes="6900496" totalbytes="22794752" percent="30" >
<soa freebytes="6671632" totalbytes="22565888" percent="29" />
<loa freebytes="228864" totalbytes="228864" percent="100" />
</tenured>
<refs soft="215" weak="169" phantom="0" dynamicSoftReferenceThreshold="9" maxSoftReferenceThreshold="32" />
<time totalms="21.265" />
</af>
I have checked the below notes,but I'm not clear.
761434.1 Workflow Mailer fails to star : Maximum Number Of Errors (100) Have Been Reached : WebSession.isSessionRecreated
333017.1 OWF.G Mailer just started dumping a OutOfMemoryError
Please teach me what's the meaning of errors and what we should deal with them.
Best Regards
LiyingPlease post the details of the application release, database version and OS.
Please see these docs.
Java.Lang.Outofmemoryerror On Large Inbound XML Message [ID 560680.1]
Intermittently Notification Emails are not Received [ID 1315344.1]
OWF.G Mailer just started dumping a OutOfMemoryError [ID 333017.1]
Output Post Processor is Down With Error "Insufficient Free Space Following GC" [ID 885607.1]
Thanks,
Hussein -
NEED INFO REGARDING WORKFLOW MAILER &MAPI
HI,
Need information
our workflow mailer is configured with LOTUS NOTES now we wanna to
move to OUTLOOK and we use IMAP4 protocol now we wanna to
replace this with MAPI.
So please let me know how to configure in OUTLOOK and also
MAPI is a oracle certificated protocol and how to configure it.
Thanks in Advance,
VandanaPlease see these docs.
What Mail Server Types Can Be Used To Configure The Workflow Java Mailer In R11i and R12.+ [ID 943578.1]
A System Administrators' Guide: Oracle Applications 11i Workflow [ID 139745.1]
WF 2.x: Configuring the Notification Mailer v 2.0.3 - 2.6.2 (not OAM) - MAPI [ID 104197.1]
Thanks,
Hussein -
Regarding Workflow - eApprovel mail
Hello Experts,
I am new at SAP workflow..
This is regarding Workflow issue,
before upgradation (4.6 to 6.0) means in 4.6,
prior to upgrade the eApproval mail showed the approver and the status of PO in the approval cycle like below
Vendor : vendor name
Approval log Date Status
Scott Loyet 11/01/2007 Approve
Scott Loyet Pending approval
001 Supplier Portal Support/Functional 10,000 EA 1.00 USD
now after upgradation (in 6.0)
eApproval mail message is only showing the PO number and the PO line items
At present the workflow mail does not contain the current status of the PO
means it showing like this
001 Contract Investigations 75,000 EA 1.00 USD
002 Contract Investigations 30,000 EA 1.00 USD
At present the workflow mail does not contain the current status of the PO,
can you please tell me what needs to be done and what changes to be made...in 6.0,can you please help me on thishello experts,
can you please help me on this...please...
Thanks and regards
Durga.K -
Receiving so many e-mails for the workflow mailer
Hi,
One of the user received thousands of e-mails(same emails) from the Workflow Mailer. Do you know why is this happening?
We changed the statuses from 'null' to 'sent' and entered an end date. The user has stopped receiving the duplicated e-mails.
Please let me know if there was a problem with that user or anything else?
it's urgent.
Regards,
PrasadPrasad,
Does this user have any end-dated responsibilities?
I suspect that the user-responsibilities related data is corrupted, so I would suggest you refer to the following note and try the suggested solution outlined there.
Note: 406892.1 - Missing/Corrupted User-Role Responsibilities
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=406892.1 -
How to configure oracle alerts to use Workflow mailer?
Hello Guys:
We were trying to setup oracle alerts using workflow mailer. I have created a dedicated mailer for handling oracle alerts related mail.
Here is what I need to clarify:
1. Having setup a new mailer for Oracle alert do I have to still configure the Options in Oracle Alerts. This is where you choose which type of mail u want to use ( like Unix mail,Windows NT mail )
2.How do I tell oracle alert to use the new mailer that I created exclusively for this? While creating the mailer at some point I remember putting ALR in configuration form.
I am on 11.5.10 CU2. I am on 11i.ATG_PF.H
Regards,
BalaHi Hussain:
Based on the note I realised that my oracle alerts will user unix sendmail. But then If u go to " Oracle Alert Options "
-- > Mail systems -- I check Unix send mail
-- > Mail server options ( Do I have to fill this section? )
My guess is that the send mail will post the email to a IMAP account ( I created oraclealert account ) and IMAP account will push the alert email to Recipient
Mail Database/Server Name --- imap.mydomain.com
Mail Priority --- Normal
Accounts
Application Installation username Password
Blank ** Blank ** oraclealert pwd
Blank ** Blank ** oraclealert pwd
** - It wont allow me to choose an application.
Is there a simple test to make sure that my oracle alert is working or not? I appreciate your help.
Regards,
Bala -
Issue in workflow mailer configuration
Hi all,
I have to configure notification mailer, for that I have an IP address of smtp server and an email username and password. Using these 3 details I can configure the mail in MS Outlook and send/recieve mails. When I give the same details in Notification mailer page, I am getting relaying denied error. Please help me in resolving this.
Our environment is R12.1.3 on AIX 6.1
Regards,
CharanHi,
Thanks for the reply. Error is below
FAILURE: javax.mail.SendFailedException: Sending failed; nested exception is: class javax.mail.SendFailedException: Invalid Addresses; nested exception is: class javax.mail.SendFailedException: 554
5.7.1 <[email protected]>: Relay access denied Parameters {{OUTBOUND_USER=test@gov.***, FROM=Workflow Mailer, REPLYTO=test@gov.***, OUTBOUND_SERVER=10.10.10.10, OUTBOUND_PASSWORD=*****,
COMPONENT_ID=10006}}
Regards,
Charan -
Additional workflow Mailer setup on Purchase Order
Dear All,
We are running on R12 on 11.0.1.7 database. We have configured Workflow mailer notification and it seems to be running properly.. And the approver/approvee gets appropriate mails on appropriate time.
But our management requires additional customization on how this function should work, The requirement is as follows:
Problem Description: When a PO is raised it goes to his immediate superior who can approve the PO for less than Rs.100,000 and if it is above the stated amount, the respective PO requires further approval from the next superior in the hierarchy.
The workflow standard setup is such a way so that the user who has raised the PO gets a mail notification alerting that the PO has been approved if so.
Could you guide me a way in Oracle Ebiz R12 so that not only user who has raised the PO is alerted through mail if the PO is approved but also the immediate approver is also notified via mail for POs which is above Rs.100,000.
Note: PO above Rs.100,000 goes through immediate approver and then to the next approver in the hierarchy.
Thanks in advance for all ur support
and Regards,
AsifPlease see if (How to create a custom copy of the seeded Purchasing PO Approval Workflow POAPPRV [ID 1270010.1]) helps.
Thanks,
Hussein -
Workflow mail shows junk character in outlook where arabic
Hi all
We have EBS R12 12.0.4. I am facing the problem with workflow mails.
whenever the workflow mails comes in outlook it show junk characters instead of arabic letters.
regards
MusaddaqI have done following steps but no changes have the same issue.
1. Navigate to OAM->Workflow Manager->Notification Mailer->View details in this page
2. Look for parameter called RESET_NLS change this value from 'YES' to 'NO'.
3. Bounce Notification Mailer.
Regards
Musaddak. -
How to configure workflow mail service..
Hi Experts,
How to configure the workflow mail server.
I will tell you my requirement,
i have to configure email notification for oracle application R12.1.2 , all the emails related to administration should go to one email id, this email id is of gmail. I am not able configure it.
Oracle application : 12.1.2
Oracle Database : 11.1.0.7
Please help me.
Regards,
Mohd Mohtasham JeelaniPlease also see:
How To Configure Workflow Notification Mailer To Send Email Notification For Only One Workflow Item type/Process? (Doc ID 786647.1)
Configuring A Notification Mailer Based On A Specific Item Type. (Doc ID 415723.1)
After Upgrade R12.1.3 All Alerts Are Completing With Signal 11 (Doc ID 1438919.1)
Oracle Alert Response Processing Is Not Working After R12.1.3 Upgrade (Doc ID 1505620.1)
Thanks,
Hussein -
Hi Guys,
Im busy setting up a workflow mailer thru a metalink note guide but I'm a bit confused..
I've run the following scripts
SQL> select target_node
from fnd_concurrent_queues where concurrent_queue_name like 'WFMLRSVC%';
2
TARGET_NODE
CIBPRD01
SQL> SELECT b.component_name,
2 c.parameter_name,
3 a.parameter_value
4 FROM fnd_svc_comp_param_vals a,
5 fnd_svc_components b,
6 fnd_svc_comp_params_b c
7 WHERE b.component_id = a.component_id
8 AND b.component_type = c.component_type
9 AND c.parameter_id = a.parameter_id
10 AND c.encrypted_flag = 'N'
11 AND b.component_name like '%Mailer%'
12 AND c.parameter_name in ('OUTBOUND_SERVER', 'REPLYTO')
13 ORDER BY c.parameter_name;
COMPONENT_NAME
PARAMETER_NAME
PARAMETER_VALUE
Workflow Notification Mailer
OUTBOUND_SERVER
mailhost
Workflow Notification Mailer
REPLYTO
[email protected]
COMPONENT_NAME
PARAMETER_NAME
PARAMETER_VALUE
The problem is the OUT_BOUND_SEVER is set to mailhost.
where do I get the right name for the out_buond_server??
Thanks
SibusisoHi Sibusiso;
Pelase check below notes which could you helpful for your issue:
How to Troubleshoot 'Validation failed' Errors when Starting the Mailer [ID 463354.1] *<< part 1) Regarding OUTBOUND_SERVER related error:*
PS: If you dont your SMTP Ip connect wiht your local system admin
Regard
Helios -
Hi Guru's,
I have inititally configured workflow mailer.
Now i need to add the imap feature. I have set up keystore for SSL certificate authentication and added it the applications by running @$FND_TOP/sql/afsvcpup.sql
When i send testmail from OAM, it reaches the user's inbox and i am able to send acknowledgement back from the user's inbox. I am also able to see the acknolwedgement mail in the inbox of the imap user's inbox.
But now how will it actually update the R12 applications from the imap inbox.
Shouldnt the the mails be arriving in PROCESS or DISCARD folders?
Will i get back a mail if the request has been processed or discarded?
Regards,
Sri>
But now how will it actually update the R12 applications from the imap inbox.
>
This is the functionality of inbound email processing.
>
Shouldnt the the mails be arriving in PROCESS or DISCARD folders?
>
Once the workflow mailer receives a notification and acts on it, the message will be automatically moved to the PROCESS or DISCARD folders.
>
Will i get back a mail if the request has been processed or discarded?
>
I do not believe this functionality of confirmation exists.
MOS Doc 831982.1 - 11i/R12 - A guide for troubleshoting Workflow Notification Emails - Inbound and Outbound
HTH
Srini -
Workflow Mailer Service not starting
Hi Friends,
My Environment
OS : OEL4U5
Application Vers : R12.1.3
Db Version : 11.1.0.7
Hostname : erptest01
Here we configuring the Workflow Notification Mailer Service in our R12 instance. When we trying to start services in the workflow service componenets every service was started except the below Workflow Document Web Services Service
Select Name Status State Node Actual Processes Target Processes
1 Workflow Document Web Services Service Down Activated ERPTEST01 *0* *1*
2 Workflow Agent Listener Service Up Activated ERPTEST01 1 1
3 Workflow Mailer Service Up Activated ERPTEST01 1 1
Kindly find the error in Log file FNDCPGSC2064585.txt,
[Nov 17, 2011 10:01:39 AM IST]:1321504299198:-1:-1:erptest01.4iapps.com:172.16.1.11:-1:-1:1:20420:SYSADMIN(0):-1:Thread[BES Dispatch Thread,5,main]:172.16.1.11:1942:1321504289045:29:ERROR:[SVC-GSM-WFMLRSVC-2064585 : oracle.apps.fnd.cp.gsc.SvcComponentContainer.onBusinessEvent(BusinessEvent)]:java.lang.RuntimeException: 172.16.1.11.4iapps.com
at oracle.apps.fnd.wf.mailer.MailerUtils.isSocketConnectableNew(MailerUtils.java:300)
at oracle.apps.fnd.wf.mailer.SMTPUtils.isValidOutbound(SMTPUtils.java:522)
at oracle.apps.fnd.wf.mailer.Mailer.validateParameterValues(Mailer.java:1238)
at oracle.apps.fnd.cp.gsc.SvcComponent.performValidateParameterValues(SvcComponent.java:233)
at oracle.apps.fnd.cp.gsc.SvcComponent.start(SvcComponent.java:314)
at oracle.apps.fnd.cp.gsc.SvcComponentContainer.handleComponentEvent(SvcComponentContainer.java:2212)
at oracle.apps.fnd.cp.gsc.SvcComponentContainer.onBusinessEvent(SvcComponentContainer.java:301)
at oracle.apps.fnd.wf.bes.DispatchThread.run(DispatchThread.java:57)
[Nov 17, 2011 10:01:39 AM IST]:1321504299198:-1:-1:erptest01.4iapps.com:172.16.1.11:-1:-1:1:20420:SYSADMIN(0):-1:Thread[BES Dispatch Thread,5,main]:172.16.1.11:1942:1321504289045:29:UNEXPECTED:[SVC-GSM-WFMLRSVC-2064585 : oracle.apps.fnd.cp.gsc.SvcComponentContainer.onBusinessEvent(BusinessEvent)]:An unexpected RuntimeException or other Throwable occurred -> java.lang.RuntimeException: 172.16.1.11.4iapps.com
[Nov 17, 2011 10:01:39 AM IST]:1321504299198:-1:-1:erptest01.4iapps.com:172.16.1.11:-1:-1:1:20420:SYSADMIN(0):-1:Thread[BES Dispatch Thread,5,main]:172.16.1.11:1942:1321504289045:29:EXCEPTION:[SVC-GSM-WFMLRSVC-2064585 : oracle.apps.fnd.cp.gsc.SvcComponentStateMachine.updateComponentStatus(Logger, Connection, int, String, String)]:BEGIN (Logger{mLog=[$Header: AppsLog.java 120.4.12010000.2 2009/06/17 15:14:37 rsantis ship $ @2216507 {oracle.apps.fnd.profiles.ExtendedProfileStore@7124af}],mUniqueId=SVC-GSM-WFMLRSVC-2064585,mLevel=4}, oracle.jdbc.driver.T4CConnection@19fe451, 10006, STOPPED_ERROR, Could not handle the control event -> java.lang.RuntimeException: 172.16.1.11.4iapps.com)
[GC 16930K->11874K(18016K), 0.0007370 secs]
Kindly suggest us,
Thanks,
AthishHi Hussein
We Followed the above mentioned docuement but its not fixed. And atlast we resolved and fixed issue by following steps.
1) Downed the Apps services.
2) Runned the cmclean.sql as a apps user.
3) Rebounce the DB.
4) Started the every services.
Select Name Status State Node Actual Processes Target Processes
1 Workflow Document Web Services Service UpActivated ERPTEST01 *1 1*
2 Workflow Agent Listener Service Up Activated ERPTEST01 1 1
3 Workflow Mailer Service Up Activated ERPTEST01 1 1
Now the Notification Mailer is Up and running with out any issues
Thanks & Regards
Athish -
PO Create - Workflow - Mail Problem
Hi experts,
I have an workflow that trigers after PO creation.(BUS2012). Then it sends a mail. But, mail does not work correctly. In SBWP , if i run the workflow, mail comes to inbox. I want it works directly.
Waiting for helps.
Regards,
OrhanHi,
Can I know which event and method you are using to send mail after the PO creation.
Is the workflow instance is created or not on the PO creation.
Regards,
Aditya -
How to configure workflow mailer?
hai dbas
could u please tell me how u configure the server for putting workmail mailer.
regards
madhuCheck Note: 234436.1 - How To Setup Workflow Mailer in an Oracle Applications 11i Environment
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=234436.1
Maybe you are looking for
-
BADI for MIGO update - Data not getting saved in table sometimes
Hi, This is regarding automatic update of material document number to our Z Table for Gate entry in MM. Steps for Generating GR throu2019 MIGO:- 1) the user has to key in the gate entry number and plant, 2) then after giving i/p values the user has
-
Missing episodes - Nikita (Warner TV)
Missing episodes - Nikita (Warner TV) - should be 22 episodes in series 1, only 14 listed? Solved! Go to Solution.
-
Request for MCID and Access code.
Hi I lost have my MCID and Access code. Please let me what are details required.
-
Errors when installing Photoshop CS6
Errors when installing Photoshop CS6
-
Firefox doesn't show/display/load my addressbook within my hotmail account anymore, it worked previously well, so has nothing to do with the change from hotmail to outlook. Since a week or so, I realized a slowness in loading my recently used address