Urgent!!RSRT goes to DEBUG MODE !!

Hi All ,
RSRT Transaction goes to Debug Mode after I execute the VARIABLE SCREEN..
Why is it so happens often for me last few days???When I do some changes in Query & run in RSR...
the above problem occurs...
Thanks A lot.

hi
I found why it is coming for my report alone...??When I set some Key Figures to hide..It throws me this error.It says SOME RAISE EXCEPTION TYPE cx_rsr_x_message.
Is there any other options do u have to resolve this issue???Only for my report it is happening...And the Breakpoints are written Manually which cannot be removed also in The CODING..
pls give me some solutions...Really it is consuming my time due to this stupid error.

Similar Messages

Customer Exit var (basedOn 0P_KEYDT) ABAP error - Going into Debug mode

Hello All,
I have created a BEX Query based on Infoset, so i couldnt use '0P_KEYDT' SAP Exit in a variable.
Instead i created a Z 'Customer exit' with the same code.
But when i execute query in RSRT, query is going into Debug mode.
InfoProviders are all active, when i remove the Z 'Customer Exit' from the query then query is running fine. So i see that the problem is with the Z 'Customer exit' code.
Here is the 0P_KEYDT code:
FUNCTION RSVAREXIT_0P_KEYDT.
*"*"Lokale Schnittstelle:
*" IMPORTING
*"     VALUE(I_VNAM) LIKE RSZGLOBV-VNAM
*"     VALUE(I_VARTYP) LIKE RSZGLOBV-VARTYP
*"     VALUE(I_IOBJNM) LIKE RSZGLOBV-IOBJNM
*"     VALUE(I_S_COB_PRO) TYPE RSD_S_COB_PRO
*"     VALUE(I_S_RKB1D) TYPE RSR_S_RKB1D
*"     VALUE(I_S_RKB1F) TYPE RRO01_S_RKB1F
*"     VALUE(I_THX_VAR) TYPE RRO01_THX_VAR
*"     VALUE(I_STEP) TYPE I DEFAULT 0
*" EXPORTING
*"     VALUE(E_T_RANGE) TYPE RSR_T_RANGESID
*" EXCEPTIONS
*"      UNKNOWN_VARIABLE
*"      UNEXPECTED_VARTYPE
*"      VARIABLE_INITIAL
DATA:
      LS_RA_SID TYPE   RSR_S_RANGESID.
IF I_STEP EQ 0 OR                    " without popup or
     I_STEP EQ 1.                      " before popup
    REFRESH E_T_RANGE.
    CLEAR: LS_RA_SID.
    LS_RA_SID-SIGN = 'I'.
    LS_RA_SID-OPT = 'EQ'.
    LS_RA_SID-LOW = SY-DATUM.
    APPEND LS_RA_SID TO E_T_RANGE.
ENDIF.
ENDFUNCTION.
Here is Z 'Cusotmer Exit Code: (Defined I-STEP and E_T_RANGE)
method ZPKEYDT.
Data: ls_var_range TYPE rrs0_s_var_range,
        l_s_range TYPE rsr_s_rangesid.
IF I_STEP EQ 1.
REFRESH e_t_range.
    CLEAR: l_s_range.
    l_s_range-SIGN = 'I'.
    l_s_range-OPT = 'EQ'.
    l_s_range-LOW = sy-datum.
    APPEND l_s_range TO e_t_range.
ENDIF.
endmethod.
I could really appreciate your help!
Thanks in advance,
DC

Hi DeeCh.
If you want to populate the value before the variabel screen input.then please follow below code
case i_vnam.
when 'ZPKEYDT'.
if i_step = 1.
    l_s_range-low = sy-datum..
      l_s_range-sign = 'I'.
      l_s_range-opt = 'EQ'.
      APPEND l_s_range TO e_t_range.
      clear l_s_range.
          endif.
          endcase.
Regards,
Nanda.S

Short dump in debug mode

Hi All,
We have recently upgraded our server from SAP R/3 4.6b to ECC 5.0. Whenever we are debugging any program(Both standard and Z-programs) getting short dump
in the select and endselect statements. This is happening only when we are going on DEBUG MODE only Appreciate any lights on this issue.(All programs are Unicode enabled).
Regards,
Ameer.

hi
your problem will solve if you put the break point after <b>ENDSELECT</b> statement. let the cursor not go inside the select-endselect statement. it causes short-dump.
thx
murthy

Process chain repair going to Debugger mode

Hi everyone,
When I try to repair a failed DTP process in a process chain, it goes into debugger mode. After exiting from debug mode, I can see that DTP has been executed successfully.
Why process chain goes into Debug mode?
Secondly after successful execution of DTP process, other remaining succeeding processes are not executed.
any idea how to solve these issues.
thanks for help
Ahmad

hi guys,
Thank you all for taking time to reply.
@Muhammad: there are no breakpoint(s) in custom routines.
@Baskaran: DTP processing mode is set to Serial extraction, immediate parallel processing.
@Amit, Martin: at DTP process repair, the Debug stop at following code
* ==== Debugging ====
* Breakpoint after start routine
    if i_r_trfn_cmd is bound.
      READ TABLE i_r_trfn_cmd->n_th_bp
           TRANSPORTING NO FIELDS
           WITH TABLE KEY bpid    = 3
                          datapid = i_r_inbound->n_datapakid.
      IF sy-subrc = 0.
* --- Data ---
*     See datapackage below
* --- Debugging ---
        BREAK-POINT.                                       "#EC NOBREAK
      ENDIF.
    endif.
when I simply exit, I can see in the process chain that DTP has executed successfully, but remaining processes don't execute.
In the generated program of transformation of DTP, there are two breakpoints; one given above and the other is :
* ==== Debugging ====
* Breakpoint before end routine
    if i_r_trfn_cmd is bound.
      READ TABLE i_r_trfn_cmd->n_th_bp
           TRANSPORTING NO FIELDS
           WITH TABLE KEY bpid    = 4
                          datapid = i_r_inbound->n_datapakid.
      IF sy-subrc = 0.
* --- Data ---
*     See datapackage above..
* --- Debugging ---
        BREAK-POINT.                                       "#EC NOBREAK
      ENDIF.
    endif.
I have checked generated programs of other transformations both SAP delivered (business-content) and client custom transformations and they all have these two pieces of code.
on additional question:
when we do repair the below box appears. Can anyone explains what exactly is this? and if this has any thing to do repair going into the debug mode. What I read on
https://help.sap.com/saphelp_nw70ehp1/helpdata/en/67/13843b74f7be0fe10000000a114084/content.htm
"Specify how long (in seconds) you want the delay to be between one event being triggered and the next process starting."
I am thinking of deleting this DTP and using a new one in process chain.
regards
Ahmad

The program is automatically launching into the debug mode.

Hi,
I have written a small servlet program. When I try to run the program it automatically launches itself into the debug mode. I have tried all things but I am not able to prevent this from happening. Can anyone help me with this.
Regards,
Prashant

My guess is you have one or more breakpoints set in the application. When it its that breakpoint, it goes into debug mode. Run the application and not what file and what line it stops on. In Eclipse IDE, you will see a blue dot next to the line that the breakpoint is on. Click on the blue dot to remove it. If your code is not too large, look through all *.java files for that blue dot and remove them.

CRM proxy debug mode

Hi All,
I am trying to debug an inbound asynchronous CRM proxy by unregistering the queue. After sending message from Component monitoring in RWB, I went to CRM system for viewing my message. The message is still there in queue but when I debug LUW, the message is getting executed. Why the message is not going to debug mode?
Thanks

I hope you went to the que to execute the stopped message.
There set a breakpoint at the proxy method and then execute. This will make the code stop.
Cheers,
Himadri

I have Mac mini and there is partition of boot camp but some miss understanding the osx 10.8.2 is deleted and while I m going to recovery mode the portition can not removing and the also cant repaired what I do I need urgent help ???? Please ?????

I have Mac mini and there is partition of boot camp but some miss understanding the osx 10.8.2 is deleted and while I m going to recovery mode the portition can not removing and the also cant repaired what I do I need urgent help ???? Please ?????

Do you have a Time Machine backup or clone? If not,
all is lost if you have in fact deleted your OSX partition
and you will have to do a reinstall from Recovery HD
and install all else.

Transaction goes to display mode after an error message / POPUP - Urgent

Hi All,
    We have a requirement that, in the Service order transaction IW31/ IW32 in the components tab , based on the material numbers entered by the user we need to call a Popup and inform user to fill in the correct value for special stock indicator.
   I tried using the BADI Workorder_update , but within that I could not call a pop up or a message. I tried using the exit EXIT_SAPLCOMK_014 where
   in I collect the incorrect components and call a POP UP with all of them. But once I call the POP UP the IW31/IW32 screen in the background goes
   to display mode and then we are not able to change the value as per information from the POP UP. This is the same problem that we faced with the
   BADI.
Please let me know if this could be handled in any other way.
Regards,
Prabaharan.G

check with exit
Transaction Code - IW31                     Create Order
Exit Name           Description
IWO10012            Maintenance order: Priority handling on central header
No of Exits:          1
Transaction Code - IW32                     CHANGE ORDER
Exit Name           Description
IWO10012            Maintenance order: Priority handling on central header
No of Exits:          1
USER EXIT
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
http://www.sap-img.com/ab038.htm
http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci982756,00.html
Rewards if useful.........
Minal

Using search on a webpage start debug mode , also goes to full screen

firefox 31, 32
How to put off

How do you start searching? For example:
* Press Ctrl+f (find)
* Press / (quick find)
I'm not sure what you mean by debug mode: is one of Firefox's Developer Tools opening up?
Maybe it would help to post a screen shot. This article has tips on that: [[How do I create a screenshot of my problem?]] Please block out or fuzz any personal/confidential information.

BEX Report Veriable is goin in Debug Mode

Dear Experts,
Hi
I created BEX Report on Multiprovider, for this report input veriable is Key date & Company Code. When I am executing this report from RSRT input screen is comming & Key date selection is properly working but when I clicking on Comp Code slelction button it is going in ABAP Debug mode & I am executing this ABAP coding screen with F8 key report is showing below error.
An error occurred when getting data from the processor.
>> Row: 83 Inc: LRRMSU13 Prog: SAPLRRMS
Please provide solution it is very very urgent basis..
Thanks & Regards,
Sayyad Irfan

Hi,
Try giving a input on comapny code variable instead of selection a value form selection and also check the properties of that variable.
Also see if its giving any error message while saving the query in designer.
Hope it helps.
Regards,
AL

FlashBuilder 4.7 will not run in Debug mode with BlackBerry 10 simulator

We have developed an app that has been released both for Apple and Android working well.
When trying to do the same for BlackBerry it was rejected because it did not start at all.
The App that runs fine on the BlackBerry simulator in the "run configurations mode".
However when I try to run it in Debug mode it will not start at all. Just flashes and simulator goes back to main menu.
The debugger will after a while time out since it cannot connect to the app running on the simulator.
BlackBerry 10 Simulator runs under vmWare Fusion.
Anyone seen this before?

Hi, Silence04. Welcome to the Discussions.
You had serious disk directory corruption. That can also cause corruption in OS files: while Disk Utility or DiskWarrior may fix the directory, if the directory corruption resulted in OS files being damaged — as it appears to be in this case — then you can't avoid an Archive and Install. For important tips on this, see my "General advice on performing an Archive and Install" FAQ. Perform the steps therein in the specified order.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Debugging mode - sql query not showing up in console

Hi,
I have turned on the debugging mode via Admin->Server Configuration->Debug Level. Set it to debug mode.
I restarted the server. I wanted to test if the query will show up if there was an error in the query.
However I am not seeing any query. It complains that there is some error, but doesn't show what query string it is using.
Anyone got any idea how I can get query to show up on console (BI Publisher web interface) as opposed to
going and seeing the log files on the server.
Please let me know.
Thanks
Girija

Thankyou Vetsrini.
I will try out custom log table approach.
I see that there is a way to test pl/sql scripts via the DBMS output
and for that we need some invoking program like SQL PLUS to get the
log out into a file.
However, we wanted to see if there is a way to set Pl/SQL log files
and get PL/SQL logs when the calling program is BI Publisher.
regards
Girija

ABAP Runtime error in debug mode

Hi all,
I am facing foll. run time error in debug mode
Runtime Error          DBIF_RSQL_INVALID_CURSOR
Except.                CX_SY_OPEN_SQL_DB
Possible causes in the application program:
Within a loop (SELECT/LOOP/EXEC SQL), one of the following
statements is used:
- MESSAGE (apart from MESSAGE S...)
- COMMIT WORK
- ROLLBACK WORK
- CALL SCREEN
- CALL DIALOG
- CALL TRANSACTION
- SUBMIT
- BREAK-POINT
- WAIT
In debugging mode, a program sometimes triggers
a "COMMIT WORK" during the database selection. As a result
this termination may also occur in debugging mode with a correct
program.
A "COMMIT WORK" during debugging may be due to the following reason
1. A program or screen was regenerated
   and updated in the database.
2. Each user needs a private process in debugging mode, but
   the number of available processes is restricted. If this
   limit is exceeded, each debugging step then requires a
   "COMMIT WORK".
its urgent.
if i run the prg directly to tcode der is not ne error.
but i want to execute the prg. in the debug mode.
its a ZPRG.
with regards,
Purva.

hi,
You need to change your logic.
Then , i hope your problem wil be solved.
Because of nested select statements, you are getting that error.
Declare seperate Internal tables for VBRK,VBRP, KNA!,j_1iexchdr, j_1imtchid.
Declare Itab_final with all required fields from all tables.
Dont use select-endselect anywhere.
I am giving Pseudo code here.
Try to use this logic.
I used question mark in code : there you need to use ur required field names.
Hope it wil help you.
select vbeln kunrg zterm bukrs knumv netwr kunrg from vbrk into corresponding fields of table itab1
where vbeln = docno.
select matnr posnr arktx fkimg meins netwr werks aubel from vbrp into corresponding fields of table itab2 for all entries in itab1
where vbeln = itab-vbeln.
select name1 stras pstlz ort01 land1 from kna1 into corresponding fields of table itab3 for all entries in itab1
where kunnr = itab1-kunrg.
select preprn exdat docno from j_1iexchdr into corresponding fields of table itab4 for all entries in itab1
where rdoc = itab1-vbeln.
select j_1ichid from j_1imtchid into corresponding fields of table itab5 for all entries in itab2
where matnr = itab2-matnr.
Loop at itab1 into wa_itab1.
read table itab2 into wa_itab2 index sy-tabix.
read table itab3 into wa_itab2 index sy-tabix.
read table itab4 into wa_itab2 index sy-tabix.
read table itab5 into wa_itab2 index sy-tabix.
itab_final = itab1-?
itab_final = itab1-?
itab_final = itab2-?
itab_final = itab3-?
itab_final = itab4-?
itab_final = itab5-?
append itab.
endloop.
select eikto from knb1 into table wa_knb1
where kunnr = itab_fianl-kunrg
and bukrs = itab-bukrs.
select kawrt kbetr kwert kschl kposn knumv from konv into corresponding fields of wa_konv
where knumv = itab_fianl-knumv
and kposn = itab_final-posnr.
append wa_konv.
endselect.
Regards
Sandeep Reddy

Call function in debug mode

Hi,
when I´m on the test function screen of se37, I can run the function in debugging mode and it´s starting with the debugger on the first code line.
Is it also call a function from a report in this debugging mode?
thank you!
reward points guaranteed

Thank you for your answers...
Let me explain a little bit more in detail, what I want to do.
I have an XML interface function which is going to be called by an
external application about RFC, reading binary data,
interpreting that as XML and doing something in the SAP system afterwards.
As the system is a 4.6C I can´t debug externally, I want to provide
a debugging function in a monitoring application for that.
As people are using the monitoring, which are not familiar with all
the code behind that, I want to start the debugging mode by myself,
without setting a breakpoint.
Let me describe it like this:
When you type in /H in the transaction field in the SAP menu bar, the
debugging mode is going to be started for further actions.
All I want to do is starting that /h debug mode without typing anything
in the transaction field, just inside of the report.
How can I do that?
Michael

Running in Debug Mode

Hi All,
If I run my OAF page in debug mode and keep pressing F8, the control tends to reach classes like OAWebBeanHelper etc.
Are we suppose to look into the code for these classes for debugging ?
How do I skip these seeded classes code when I am in debug mode ?
I want to see, where the control is going from the end of my current method..
-Amit

What exactly are you trying to debug. At the end of your method it will go back to the next line on the calling method. You can check that in the stack window(next tab to the structure pane) where you will find the entire stack of flow. You can also use Step out of the current method in to the calling method.

Urgent!!RSRT goes to DEBUG MODE !!

Similar Messages

Maybe you are looking for