**URGENT** Scene button problem!
Why my 'maps' and 'video' buttons do not play the movie? I use this code:
on(release){gotoAndPlay("play");}
I have labelled "play" in other scene, but it does not play the movie!
I have tried this code:
on(release){gotoAndPlay("Scene 36", "play");}
Still, it does not work as well! I got deadline this week, so I need your help ASAP!
I got other button problems on every scene! It's frustrating!
Please download my flash file to look at my flash product!
http://www.4shared.com/file/24177440...6d/Maps_1.html
Nope it doesn't work , I got my deadline this week and if you got a spare time, would you please download my flash and check and repair it please! Only two buttons need refitting and nothing else! I asked my teachers, they tried their best and couldn't find what the problem is. I looked through other forum website, I tried the solutions and it doesn't work! I am really behind as there are many failure in my project! This is my first flash creation.
Similar Messages
-
Caller screen Buttons problem Z10STL100-1
I have Z10STL100-1 after official update Z10STL100-1/10.3.1.1565 having caller screen Buttons problem these are little above not like it's on 10.2 very below position. I security wipe and restart many times still same position of buttons? See pic attached
Hello,
Did you check if there are no objects on that index slide that have a fading transition? You should set the transition for every object to 'No transition'. The transition can be found in the Properties dialog, tab Options.
Lilybiri -
Apart from the lock button problem in iphone 5 the display brightness suddenly goes blank and becomes normal after locking and unlocking the iphone. The Apple service centre in India is denying to service the iphone as it was purchase in USA even though the iphone is in warranty.
iPhones do not have an international warranty. Warranty is valid only for the country of purchase. This is most likely because different countries require different iPhone models. Not reasonable to expect all countries to maintain stock for all models.
-
PrE9 - Dvd scene buttons not saving image (from MPG)
Hi All,
New user to PrE9, I've used Premiere 6 pretty extensively in the past and just bought PrE9.
Using PrE9 on Windows 7 Ultimate (64-bit). All latests drivers/patches/etc. are installed.
I've tried creating a Dvd made up of some videos I have laying around (generated using Premiere 6), mostly MPG. When I'm in preview mode and I set the in-point for the scene button it works as expected; well, most of the time.
After I burn the Dvd (or use one of the other sharing methods) a couple of the scene buttons are blank/black. I've tried a number of templates including Comicbook and Road Trip with the same results.
I see there are a couple other threads with similar issues, but I don't see any resolution. Has anyone gotten this fixed or working consistently?
It's really annoying to have everything work then end up burning a coaster.
Thanks.
DanielHi Bill,
Thanks for the quick response.
Yes, Premiere 6.x, the precursor to Premiere Pro.
My burns so far have been using Memorex Lightscribe DVD+R discs.
I 'burned to folder' as you suggested and then used the latest version of VLC (videolan.org) to play back the VIDEO_TS folder. The scene selection showed two of the buttons blank/black (as described before). Note: I'm still using the Comicbook template.
To clarify:
- I don't have the 'Motion menu button' option checked for the scene buttons in question; just trying to use a still from the video clip
- Sometimes the 'Scene Menu' editing window shows the buttons in question with images, other times they are blank/black. If I mess around with the 'In Point' (another whole post on how that is supposed to work) I can eventually get the image to show up. That's when I tried burning but the output still has the issue.
- I sometimes have the issue where the primary 'scrub' window doesn't show the video correctly; it's blank. Sometimes it comes back but usually requires a restart of the app.
My experience with PrE9 so far is disappointing. I'm not doing anything complicated, just trying to throw some video clips together and burn a dvd. If the app has trouble doing this what will it be like when I try and use all the features or do something more complicated? I could write it off as issues with the videos, but they were generated from an earlier Adobe product so that's no excuse.
Any other suggestions are appreciated.
- Daniel
Message was edited by: DCreeron to correct typo and 'Motion menu button' option name -
Naming Buttons - Problem with using Captivate 7 Buttons to Open URL or File
After spending too much time troubleshooting a button problem, I discovered the importance of naming each item in a Captivate project.
For some reason I have yet to figure out, publishing to SWF from Captivate causes buttons to function arbitrarily. In my case, I had eight buttons pointing to external URLs, three that worked and five that didn't. All of the buttons pointed to the same external website, only to different PDFs hosted on that site. Each button was named with the default "Button_X" convention as set by Captivate. After trying lots of different settings adjustments, On Enter and On Exit actions, and Play/Pause timings, I did what I should've done from the beginning; changed the names of the buttons.
Why this worked? I don't know. I've seen hints on other discussions as to SWFs not working well when there are a lot of unnamed or default-named items. If there's some logic to this I would be happy to know it, but for a default setting to cause such a bizarre problem is beyond my comprehension. I could understand if I had named the buttons incorrectly, but I didn't do anything to them; I left them with the names created by default.
Hopefully this helps someone else resolve a similar issue and, if anything, encourages everyone to follow best practices and use a clear file naming conventions for all projects.Hi there
Perhaps the link below will help?
Click here to view
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks -
K button problems on keyboard. Has to be pressed harder than all the other butons on the keyboard. Ive tried going on command prompt and pressing it, and its the same. I am running windows 7 pro.
you probably need to get a new keyboard if you have a model number i can send you a link on what you need thanks
-
HT1688 iPhone 4 home button problem
Good afternoon,
I have an iPhone 4 and it still in good condition but sometimes, the Home button doesn't respond quickly or doesn't respond at all. What to do?I seem to have fixed my iPhone 4 home button problems.
1. Sync phone and back up.
2. Go back and resync phone but uncheck all the apps you have purchased/downloaded so that your iphone will have no additional apps on it.
3. Now reset your phone as a NEW PHONE.
4. When reset as NEW, unplug it and try home button functions. I'll bet they work just fine, like mine did.
5. Now that you are satisfied you can resync your apps, but be choosey. Re-install only a couple at a time, and test your home button each time. You'll soon find out which of your apps is causing the problem. It's time consuming and irritating, but it certainly works.
So far - no problems with my selected re-installed apps. My home button works fine.
However, I recently purchased several photography apps and an emoticon app and that was when the problems appeared to have started.
So I've been very selective in putting only the apps I want back on ... for now.
Hope this helps.
I will report back to tell you if this complicated but effective solution has worked for me. -
Home button problem in iphone 3g 3.0
After upgrading my iphone 3g to 3.0 software, the home button has become so unresponsive, i have to click it 6-10 times sometimes to awake it. I mean what is it, dont you check the update before making it available to public, i mean its annoying, my 2 other friends have same problem as mine, they are on iphone 3g too. even 3.0.1 behaves the same way. comeon folks, become professional, kindly fix this thing in next firmware release.
I had exactly the same problem - I bought my iphone 3gs last week, upgraded it and had the 'home button' problem. I tried all the fixes - restarting, resetting to factory settings, reloading update, etc. Then, a few days later, it all sorted itself out - no idea what happened, but since then my home button has been working perfectly! I have a feeling the factory reset and reload of update might have been the one that eventually did the trick...but since then, touch wood, it has been working perfectly. I would suggest trying the factory reset and see if that helps...make sure you back up first though!
-
Mega 865 - HiFi Button problems !
Mega 865 - HiFi Button problems.
Hi,
I recently had some problems with the LCD display on the 865 and after
following the very technical (wiggle the power cable) instructions, i got
the LCD display working again, but now my HiFi button doesn't work
has anyone experienced this before ??
The radio/lcd display works fine in media centre
cheers.I refer to this post https://forum-en.msi.com/index.php?threadid=66148
I did this and the LCD display came back on again but now the hifi button doen't work -
Anti virus's and home button problem
Hi
1)i want to
We Need antiviruse in My iPhone 5s ?
2)how to understand my iPhone when produce???
Due to home button problem .
ThanksThere is no home button problem, the problem is with the power button on some iPhone 5 devices: https://ssl.apple.com/support/iphone5-sleepwakebutton/
-
Hi guys,
So the problem with my laptop is that when I press the power button, the power button itself and the two leftmost lights below the touchpad- power and battery- they light up for a second or two. But the laptop doesn't start up and the lights go off. If I long press the power button, the laptop starts, though.
Now this is not a severe problem as of now, I know. But I'm pretty sure this will escalate into something else. Does anyone know what the problem actually is and what I can do to solve it?
P.S.: Unlike people with power button problems, I didn't do anything with the hardware or software.Hi Sanjana,
Welcome to Lenovo Community!
I’m sorry to hear that the Power button is not working as expected in your G750 Laptop. I would suggest you to perform the Flee-Power, below are the steps to perform the same:
Remove the battery and any other peripheral device connected to the computer.
Hold the power button for 10-15 seconds and then connect only the AC Adapter and try to turn ON the computer.
If the issue persists even after performing Flee-Power, I would suggest you to contact our Technical Support for further Assistance to get the details of the nearest Authorized Service Center to get the issue analyzed.
Click here to open a link where you can select the country and get the exact contact support number. I’m sure they will be a great help.
Do post us back for further queries.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
Power Button Problem NO MORE HP!!!
Tried everything to fix my power button, but no way,NO MORE HP.
Today, one of my friends also had power button problem, even his laptop was one of the newest model.Model?
-
Hello, i own a Hp Dv7t Notebook, in the past week my laptop has been acting differnet, My promblem starts with the volume slider button. The volume slider button is located at the top of my notebook and is touch sensitie when you run your finger over it. Before my problem the button when used would adjust the volume and make a "clicking" sound while displaying a window showin g the current volume level......Now, for some reason the button doesnt work in the same fashion as before......now when u use it the button makes no clicking sounds nor displays a windows that it used to, this problem is rather small but it has also enabled my volume to be lower than normal.......but i must say that the button does still work, it adjusts the volume as it should but doesnt do the other things..........i am computer literate and do no how to fix many of my system malfunctions, but this one has me stumped........Sorry for such a long post but i would really appriciate some help, THANK YOU!!!!!!!!
HP Customer;
Evan C. Ford
Email Me Please <text removed for privacy>
Message Edited by WendyM on 10-26-2009 12:05 PMIt sounds like my problem was very similar to tlee's.
All it took was doing a cold reboot, I found the solution here: http://h30434.www3.hp.com/t5/Hardware/HP-dv4-1225dx-Quick-Launch-Button-Problems/m-p/272053#M29072
When tech support couldnt fix it I asked for the number to call and return my laptop. Finding that thread changed my mind. -
Updating/Adding Scene Button
Created basic iDVD movie (my first -yes!). Subsequently added new chapter in iMovie, and would like to update/add scene button to iDVD project. In reading posts, apparently I need to "delete existing movie and re-import." If this is the correct procedure, how is delete - reimport safely and cleanly done? Thank you very much.
MacbookPro Mac OS X (10.4)If I were doing this, i'd burn a disc image first of the existing/working iDVD simply as a safegaurd (provided one has the available HD space to do this plus a brand new modified project). If not, at least burn it to DVD as a backup.
Delete the encoded assets in iDVD. Now drag the entire iDVD project to the trash. Empty it. Restart the computer.
Now go back into the original iMovie project and make the necessary modifcations. Once it's completed & previews exactly as you want it with all the correct/amended chapters & buttons then create a disc image and burn to Verbatim DVD-R at 4x or slower using Apple's DU or Roxio Toast.
Note: To use chapter markers set in iMovie in your iDVD project, you can add the iMovie to iDVD using the export features built into iMovie and iMovie HD. You can also use the Media pane in iDVD to add iMovies with chapter markers.
IMPORTANT: If you share an iMovie project as a QuickTime movie using the Full Quality option, iMovie HD doesn't include chapter markers in the QuickTime movie.
Hope this is Helpful and good luck.
(3) G4 PM's/(3) S-Drives/Sony TRV900/Nikons/6FWHD's/PS7/iLife06/FCPHD/DVDSP/etc. Mac OS X (10.4.8) My ichatav AIM account is: SDMacuser1 (Please use Text chat prior to video) -
Modifying iDVD 6 Themes: increasing scene buttons
For some reason iDVD themes is missing the most useful and simplest theme of all:
A blank, full frame where you can place your own image or movie clip with the required buttons.
I have figured out how to modify in iDVD 6 the Full Frame theme, eliminating the useless bands.
This theme limits the number of scene buttons to 6, but I would like to have all the buttons on one page/panel in some case when there more than 6 chapters/scenes. What in the resources do I need to modify?
Even more useful would be a document that describes the structure of the theme resources.
Andycan't help you with the themes resources. Perhaps someone else can. But take a look at Karten's web site and also his replies on this forum for forcing more buttons per page in iDvd. For example:
http://discussions.apple.com/thread.jspa?messageID=9936102�
http://sites.google.com/site/idvdmodding/
http://sites.google.com/site/idvdmodding/no-theme
Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software / products that may be mentioned in this topic. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information above at your own discretion.
Maybe you are looking for
-
Is there a way to quickly make CC notes out of the TTS?
Hello, My project has TTS notes that are marked up with VTML tags. (For every line, I have at least 2 VTML tags to slow the speed of the spoken text because there is no way to change the spoken-text speed of the entire slide at once, let alone the e
-
I am unable to transfer music from iTunes on my PC to my iPad2. Recently I have upgraded iTunes and iPad to latest versions of software. Can you help with a solution?
-
Can Lightroom 5 save catalogs in Lightroom 4 format
I'm taking a College course in digital photography. The school only has Lightroom 4. I use Lightroom 5 at home. Is there a way to open Lightroom 5 catalogs in Lightroom 4? Or, can I tell Lightroom 5 to save my catalogs in Lightroom 4 format? Than
-
How to move photos in Events?
Once a group of photos are placed in an album, I note that a new Event is created. When I open the Event, I cannot move the photos. For example, if I want to move the last photos in the series to be the 1st photo, nothing happens. However, if I go in
-
Can Multiclip Feature Display All Clips Simultaneously In Final Video?
I want to use the multiclip feature not only to cut from one angle to another, but also to display all the 4 angles simultaneously on occasions. I know I can display 4 tracks by stacking them and using the Motion sliders to cut each one down to a qua