Urgent : TDS - Cess Calculation on Basic + Surcharge

< MODERATOR: Message locked. Please read the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] before posting next time. >
Hi Sirji
I am trying to configure the following in tds
basic rate ( A1)
surcharge ( A2 )
cess ( A3 ) &
ecess ( A4 )
but the problem is cess is on basic + surcharge
and surcharge is applicable after 1,00,00,000.
so how to built the condition taking this value consideration.
I tried with "Define formulas for calculating Withholding tax" but didn't work.
my requirement is
If invoice value = 10,00,000
basic tds = 2,00,000
surcharge = 0
cess = 2000
ecess = 1000
If invoice value = 20,00,00,000
basic tds = 4,00,00,000
surcharge = 40,00,000
cess = 8,80,000
ecess = 4,40,000
kindly let me know if anything can be done on this.
my mob is 9821050905
thanks in advance

Hello Kambli,
First you need to configure wht types and codes for
- TDS
- Surcharge
- Cess
- Edu. Cess
Then after do the following settings
FA>****>wht>ewht>calculation>wht base amount>portray dependencies between wht types.
- Here you will give surcharge wht type no to tds wht type
- You will give cess wht type no to tds + surcharge wht types
- You will give edu. cess wht type no to tds + surcharge wht types
Try this if u have any querry pl revert
If useful pl assign points
Thanks
Para

Similar Messages

TDS certificate not showing Basic, surcharge and education cess separately

Hi
i created three codes as basic, surcharge and for education cess. I have also mantained the J_1IEWT_SURC table and J_1IEWTSURC. But i am getting error in mantaining table J_1IEWTECESS as View/table J_1IEWTECESS can only be displayed and maintained with restrictions.
Please suggest me how to mantain J_1IEWTECESS table.
Surender Kumar

Hi
Please maintain as follows:-
1) spro-> Financial Accounting Global Settings (New) -> Extended Withholding Tax -> Calculation ->India -> Surcharges -> Maintain Surcharge Calculation Methods - check box should blank
2) spro-> Financial Accounting Global Settings (New) -> Extended Withholding Tax -> Calculation ->India -> Surcharges ->Maintain Surcharge Tax Codes (Separate Tax Codes) - This place should be blank
3) spro-> Financial Accounting Global Settings (New) -> Extended Withholding Tax -> Calculation ->India -> Surcharges -> Maintain Surcharge Rates (Surcharges Combined with Basic WH Tax Codes) - At this place maintain surcharge rate e.g. 10% against each company code and tax type/tax code on which surchage applicable.
This will resolve ur problem. In case any problem pl write back.
Regards
DD

Urgent TDS issue

< MODERATOR: Message locked. Please read the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] before posting next time. >
I am trying to configure the following in tds
basic rate ( A1)
surcharge ( A2 )
cess ( A3 ) &
ecess ( A4 )
but the problem is cess is on basic + surcharge
and surcharge is applicable after 1,00,00,000.
so how to built the condition taking this value consideration.
I tried with "Define formulas for calculating Withholding tax" but didn't work.
my requirement is
If invoice value = 10,00,000
basic tds = 2,00,000
surcharge = 0
cess = 2000
ecess = 1000
If invoice value = 20,00,00,000
basic tds = 4,00,00,000
surcharge = 40,00,000
cess = 8,80,000
ecess = 4,40,000

Dear Akash,
You can make two separate codes for E cess one inclusive of surcharge and another excluding surcharge. Apply the respective code in the vendor master data or select the relevant code while entering any transaction (in case you enter both the codes in vendor master data).
I think that it wont be possible to enter such a condition using a formula.
Hope it helps.
Bye.
Anand

TDS,CESS, VAT

hi friends,
In INDIA any state is still using LST & CST( means not following VAT)??
and
can anybody send me TDS ,CESS,VAT configuration. steps and pre requisites.??
THANKS

hi,
Yes, Some of the states are using LST till now. B
The configuration is done by CIN configuration.
which is
Country Version India
A Country Version is designed specifically to cater the business operations of that country over and above the generic SAP system functionalities. It comprises of functionalities degined for the laws and business practices pertaining to the country.
Most of the country-specific functions for India relate to Financials and Logistics.
The main areas are as follows:
Excise duty and the central value-added tax system (CENVAT)
Withholding tax (also known as tax deducted at source)
Sales tax
Maintenance and printing of statutory excise registers
In Indian Taxing procedure, Excise Duty plays a vital role in manufacturing scenario's. Excise related configuration is known as CIN configuration. CIN Configuration is a topic in itself.
Here is some information on CIN Configuration. While it may not appear understandable as given below, it will be understood better when you check on screen.
Country Version India comes with four pricing procedures as follows:
JINFAC (Sales from manufacturing plants)
JINEXP (Export sales)
JINDEP (Sales from depots)
JINSTK (Stock transfers
CIN:
IMG > Logistics - General > Tax on Goods Movement > India > Basic Settings >
Maintain Excise Registrations
Use
In this IMG activity, you maintain the data relating to your excise registrations.
Activities
Enter each of your excise registrations, specifying a four-character code for each
Excise Registration IDs
In this activity, you maintain excise registration IDs. You create one ID for each of your business's excise registrations.
Activities
For each excise registration in your business create a registration ID and state:
Which taxes the registration covers (additional excise duty, special excise duty, and cess)Fields for any taxes that are not covered will be hidden in transactions involving excise duty.
The maximum number of items to be printed on each excise invoice
Whether you are allowed partial CENVAT credits
Maintain Registration ID NUMBER, Excise code number, excise registration number
Excise Registration Number
A number assigned to each premises or location that has registered as a manufacturer with the excise authorities.
Every entity with an excise registration number is required to keep its own excise books.
ECC Number
Specifies the organization's ECC number.
Excise Registration Number
A number assigned to each premises or location that has registered as a manufacturer with the excise authorities.
Every entity with an excise registration number is required to keep its own excise books.
Excise range: Specifies the excise range in whose area the excise registration is located.
Excise Division
Specifies the excise division in whose area the excise registration is located.
Excise Collectorate
The code of the excise collectorate in whose area the excise registration is located.
Indicator for confirming AED usage
Additional Excise Duty Percentage. These are leviable under the additional duties of excise act. These duties are in addition to basic excise duty and special excise duty.
Example
Additional Excise duty is leviable in case of textile products, tobacco and sugar.
Similarly for SED CESS
Number of Items in Excise Invoice
Shows the maximum number of line items that the authorities allow per excise invoice.
Dependencies
This information is used when you create an excise invoice in Sales and Distribution (SD) for factory sales and for other movements.
This information is used to split the transfer postings' items into multiple subcontracting challans.
Excise register set description
Description of the excise registers set.
Partial CENVAT Credit
Indicates that the excise registration ID is allowed to credit only a portion of its input excise duty to its CENVAT account.
Dependencies
When you post a goods receipt, the system splits the input excise duty on the material into its deductible and nondeductible amounts. It posts the deductible duty to the appropriate CENVAT account, and adds the nondeductible duty to the material value.
This information is also shown when you post the vendor's excise invoice.
Maintain Company Code Settings
Use
In this IMG activity, you maintain the data relating to your company codes.
Document Type for CENVAT Postings
It controls, which document type the system uses when making CENVAT postings in Financial Accounting (FI). Here ED is document type for cenvat posting.
Indicator for providing debit account overwriting
Debit Account Overwrite Indicator. X - Indicates debit accounts can be overwritten. Use In excise journal voucher transaction. It provides the flexibility to the user to enter the debit account of his choice depending on the nature of transaction.
Automatic balance Indicator
Excise year start month
The calendar month marking the beginning of the excise year
Use
This start month represents the month for the start of the excise invoice number range. The month 04 is entered here indicating April of the calendar year as the start month for excise invoices. Any change by the Excise authorities regarding start month should be taken care of by an entry in this field and initialization.
Excise invoice selection procedure
Excise invoice selection type. To indicate the method opted by the company for selecting the excise invoice. It can be either earliest or latest invoices that were received.
Number of excise invoices to be selected
Indicates the number of excise invoices that needs to be selected in the excise invoice selection.
Days to be considered for excise invoice selection
Number of days from document date for excise invoice selection.
Example
If the value of this field is 20 and today is 28-03-97. The excise
invoice selection will show the related invoices only for the
period 08-03-97 to 28-03-97.
Document type for TDS FI posting
Financial accounting document type for TDS posting.
Document type for FI posting on Utilisation
Financial accounting document type for TDS posting.
Indicator for item level excise duty round off
This indicator is to be used for deciding whether Item level excise duty amount rounding off is required during procurement cycle. If marked 'X' then the excise duty amount will be rounded off to the nearest rupee at the Purchase order level. This will not round off the CENVAT credit to be taken. If the duty amount is less than one rupee then no rounding is done
Rounding off of Excise duty for outgoing excise invoice
You can round off the Excise amount to be paid during an outgoing Excise invoice by marking this indicator as 'X'. The rounding is done at the item level for each item where the amount is greater than 1 Rupee.
Immediate Credit on Capital Goods
Instructs the system, when you verify a goods receipt for capital goods, to immediately post half of the input excise duty to the appropriate CENVAT accounts.
The rest is posted the CENVAT on hold account, for use in the following year.
CVD Clearing Account
Specifies which G/L account the system credits when you take a CENVAT credit on countervailing duty in the Incoming Excise Invoices transaction.
Exchange rate type
Key representing a type of exchange rate in the system.
Use
You enter the exchange rate type to store different exchange rates.
Example
You can use the exchange rate type to define a buying rate, selling rate, or average rate for translating foreign currency amounts. You can use the average rate for the currency translation, and the bank buying and selling rates for valuation of foreign currency amounts.
Exchange rate type to be used for Export excise duty converts
When you are creating an Excise invoice for export sales then the exchange rate for duty calculation will be picked up using this Exchange rate type.
Maintain Plant Settings
Use
In this IMG activity, you maintain excise information relating to your plants.
Plant Settings
In this activity, you maintain excise information relating to your plants.
Activities
For each plant:
? Specify whether it is a manufacturing site or a depot.
? Assign it an excise registration ID.
You can assign the same ID to more than one plant, if required.
Depot
Indicates that the plant in question is a depot.
Dependencies
Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
Number of goods receipt per excise invoice.
Multiple GR for one excise invoice, Single credit
Multiple GR for one excise invoice, Multiple credit
Maintain Excise Groups
Use
In this IMG activity, you define your excise groups. For each excise group, you can also control how various excise invoice transactions will work.
Excise Groups
In this activity, you define excise groups. An excise group allows you to maintain a separate set of excise registers and excise accounts. The RG 23A, RG 23C and PLA serial numbers are created for an excise group.
Recommendation
Under normal circumstances, excise authorities require every business to maintain only one set of excise registers and one set of accounts. But through exemption from the authorities, multiple books can be maintained.
If your company has only one set of excise registers, then you need to maintain only one excise group.
Activities
1. Create one excise group for each set of registers that you need to keep.
1. Assign the excise groups to plants.
2. Maintain whether this Excise group is for a depot or not.
3. If you receive only one consignment for an Excise challan then you can leave GR's per EI as blank. If you receive multiple GR's for a given Excise challan and would like to avail multiple credit mark the GRs per EI as 'Multiple GR's for one excise invoice, multiple credit'. Alternatively if you want to availa the credit only after all the goods receipts have been made mark it as ' Multiple GR for one excise invoice, single credit'.
4. If you want to automatically create Excise invoice during Sales cycle at the time of billing the tick the indicator 'Create EI'
5. During depot sales if you do not want to do RG23D selection and posting separately and would like to complete RG23D selection in one step mark the indicator 'RG23D Auto post'. This will post the selected records into RG23D automatically. You cannot cancel the selection later.
6. If the indicator 'Default GR qty' is marked system will default the Excise challan quantity on to the Goods receipt if the Excise invoice number is given in the pop-up.
7. If the indicator 'Folio no create' is marked system will generate Folio numbers for RG23D during receipt of excise invoice into depot.
8. 'Automatic posting' when ticked will post the Excise invoice other movements automatically along with creation in single step.
9. 'Create Part1 for Block Stock' when marked will create a Part1 during the receipt of material into Blocked stock .
10. 'Create Part1 for STO' when marked will create a Part1 during the receipt of material through inter plant transfers.
11. 'Create Part1 for consumption stock' when marked will create a Part1 during the receipt of material into consumption stock.
Excise Group
Governs which set of excise registers a business transaction will be included in.
Following is the relation between excise group, plant and registration.
Dependencies
In define excise groups in Customizing.
Then, in transactions involving excise duty, for example, when you post a vendor's excise invoice, you specify which excise group you are using. This information tells the system which G/L accounts to post the excise to.
At the end of the period, when you come to prepare your excise registers, you create different sets for each excise group.
Indicates that the plant in question is a depot.
Dependencies
Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
GR Per Excise Invoice
Multiple GR for one excise invoice , Multiple credit
Multiple GR for one excise invoice , Single Credit
Create Excise Invoice Automatically
Instructs the system to automatically create a Sales and Distribution (SD) excise invoice immediately you create a commercial invoice or a pro forma invoice.
The excise invoice is created in the background.
Dependencies
If you want to make use of this function, you must also define the default plant, excise group, and series groups in Customizing for Sales and Distribution (SD), by choosing Excise Group - Series Group Determination.
RG23D Sales Creation and posting option
RG23D Automatic Option if selected will create Depot excise invoice by posting the selection of excise invoices in single step.
If this is not selected then you need to separately do RG23D selection followed by PGI and then RG23D verification and posting.
If you need automatic posting of RG23D selection then the Post Goods Issue should have been completed before running RG23D selection.
Default excise qty in GR
If this indicator is ticked then while doing Goods Receipt using 'MB01' system will default the excise invoice quantity on to the Goods receipt document.
Folio number for depo
Posting
If this indicator is marked then while creating Excise invoice for other movements system automatically does the Verify and Post. You need not separately Post the excise invoice
Also we can set indicator for creation of part 1 for:
Blocked stock
Stock transport order
Consignment stock
Maintain Series Groups
Use
In this IMG activity, you define the different excise series groups within your company. Series groups allow you to maintain multiple number ranges for the outgoing excise documents.
Based on excise regulations and exemptions from the authorities you can maintain multiple number series for outgoing documents. But each of these series has to be declared to the excise authorities.
Activities
? Define excise series groups based on type of outgoing document
? Assign series group to excise registration ID
? If no financial postings are required for an Excise invoice in this seris group then you tick the 'No utilization' indicator.
? If the CENVAT has to be paid immediately and you need not wait for the Fort nightly payment then mark the 'Immediate Utilization' indicator.
Example
You could define two series groups, group 001 for excise invoices, and group 002 for 57 F4 documents.
No account postings for CENVAT in sales cycle
No utilization Flag
If you do not need any CENVAT utilization for an excise invoice but would like to just generate an excise invoice then you need to mark this indicator.
IF the flag is checked then system will create an Excise invoice in the given Series group but there will not be any account postings or Part2 postings.
Immediate Utilization of CENVAT
Specifies that when you create an excise invoice, the system immediately pays the amount from CENVAT and creates the Part II entry. Such invoices will not be listed for fortnightly utilization.
If you have both fortnightly and immediate utilization for the same excise group, the account determination within CIN IMG should point to the ED interim account.
Account determination for immediate payment will be done exactly the same as being done for fortnightly utilization program.
Maintain Excise Duty Indicators
Use
In this IMG activity, you maintain the excise duty indicators.
IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
Select Tax Calculation Procedure
Use
In this IMG activity, you specify which tax procedure you want to use for determining excise duties and sales taxes on input materials in India.
? If you use condition-based excise determination, use a copy of the tax procedure TAXINN.
? If you use formula-based excise determination, use a copy of the tax procedure TAXINJ.
This tax procedure also supports condition-based excise determination, so that you can work with both concurrently.
We strongly recommend that new customers use condition-based excise determination. Note that once you have started using a tax procedure, you cannot switch to another one, otherwise you will not be able to display old documents.
Maintain Excise Defaults
Use
In this IMG activity, you define which tax procedure and pricing condition types are used in calculating excise taxes using formula-based excise determination.
Activities
If you use condition-based excise determination, fill out the CVD cond. field and leave all the others blank.
If you use formula-based excise determination, fill out all of the fields as follows:
? Enter the tax procedure and the pricing conditions that are relevant for excise tax processing.
? Specify the purchasing and sales conditions types used for basic excise duty, additional excise duty, special excise duty, and cess.
? Specify the conditions in the sales order that are used for excise rates.
? Specify the countervailing duty condition type used for import purchase orders.
See also
SAP Library -> Logistics -> Country Versions -> Asia-Pacific -> India -> Materials Management (MM) -> Condition-Based Excise Determination and -> Formula-Based Excise Determination.
IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
Condition-Based Excise Determination
Use
When you enter a purchasing document, for example, a purchase order, the R/3 System automatically calculates the applicable excise duties using the condition technique.
Features
The standard system comes with two tax calculation procedures. TAXINN is only supports condition-based excise determination, whereas TAXINJ supports condition-based excise determination and formula-based excise determination. Both tax procedures contain condition types that cover all of the excise duties and sales taxes applicable.
Since the exact rates of excise duty can vary on a large number of factors, such as which vendor you purchase a material from, or which chapter ID the vendor stocks the material under, you create condition records for every sort of excise duty.
When you come to enter a purchasing document, the system applies the excise duty at the rates you have entered in the condition records.
Activities
Customizing
Make the settings in Customizing Basic? India?for Logistics - General, by choosing Taxes on Goods Movements Account? Excise Duties Using Condition Technique and ...?Settings Determination.
These activities include one activity where you define a tax code for condition-based excise determination.
Master Data
Create condition records for all excise duties that apply, and enter the tax code for condition-based excise determination in each.
Day-to-Day Activities
When you enter a purchase order or other purchasing document, enter the tax code for condition-based excise determination in each line item. The system then calculates the excise duties using the condition records you have created.
When the ordered materials arrive, you post the goods receipt and the excise invoice. The system posts the excise duty to the appropriate accounts for deductible input taxes when you enter the excise invoice.
Creating Condition Records for Excise Duty
1. In the command field, enter FV11 and choose .
2. Enter the condition type that you want to create a condition record for and choose .
The Key Combination dialog box appears.
3. Select the combination of objects that you want to create the condition record for.
On the dialog box, Control Code means "chapter ID."
So, for example, to create a condition record for a tax that applies to a combination of country, plant, and chapter ID, select Country/Plant/Control Code.
4. Choose .
5. Enter data as required.
In the Tax Code field, enter the dummy tax code that you have defined.
6. Save the condition record.
Formula-Based Excise Determination
Use
When you execute a business transaction involving materials that are subject to excise duty, the system automatically calculates the duty for you.
Prerequisites
In order for the system to be able to determine which rate of excise duty to apply, you must have maintained all the data on the Excise Rate Maintenance screen, which you can Master Data?access from the SAP Easy Access screen by choosing Indirect Taxes Excise Rate Maintenance.?
You maintain the following types of data:
? Plant master data
You assign each of your plants an excise duty indicator. You can use the same indicator for all the plants with the same excise status from a legal point of view, such as all those that are in an exempt zone.
See also the information about manufacturers that are only entitled to deduct a certain portion of the duty (see Partial CENVAT Credit).
? Vendor master data
For each of your vendors with the same excise status from a legal perspective, you define an excise duty indicator. You must also specify the vendor type - for example, whether the vendor is a manufacturer, a depot, or a first-stage dealer. You must also stipulate if the vendor qualifies as a small-scale industry.
For each permutation of plant indicator and vendor indicator, you then create a final excise duty indicator.
? Customer master data
Similarly, you assign the same excise duty indicator to each of your customers that share the same legal excise status.
Again, for each permutation of plant indicator and customer indicator, you then create a final excise duty indicator.
? Material master data
Each material is assigned a chapter ID.
? Excise tax rate
For every chapter ID and final excise duty indicator, you maintain the rate of excise duty.
If your business only qualifies for partial CENVAT credit, you must customize your system accordingly.
Activities
Let us consider an example to illustrate how the system determines which rate of excise duty to apply to a material. Assume you are posting a sale of ball bearings to a customer. The system automatically determines the rate of excise duty as follows:
1. Looks up the customer master data to see what status you have assigned the customer.
Let's assume you've assigned the customer status 3.
2. Looks up the plant master data to see what status you have assigned the plant.
Similarly, your plant has status 2.
3. The system looks up the table under Excise Indicator for Plant and Customer to see what the final excise duty indictor is for customer status 3 and plant status 2: It is 7.
4. The system determines the chapter ID of the ball bearing for the plant.
Let's assume the chapter ID at plant for the ball bearings is 1000.01.
5. Finally, the system looks up the table under Excise Tax Rate to see what rate of duty applies to chapter ID 1000.01 under status 7.
Define Tax Code for Purchasing Documents
Use : In this IMG activity, you define a tax code for the purposes of calculating excise duty when you enter purchasing documents.
Only carry out this activity if you use condition-based excise determination.
Activities: Create a new tax code, and set the tax code type to V (input tax). Do not make any other settings for it.
Assign Tax Code to Company Codes
Use
In this IMG activity, assign the tax code for purchasing documents to the company codes where it will be used.
Only carry out this activity if you use condition-based excise determination.
Classify Condition Types
Use
In this IMG activity, you specify which condition types you use for which sort of tax. Note that this only applies to condition types that you use with the new excise determination method.
The system uses this information when you create a document from another one. For example, when you enter an incoming excise invoice from a purchase order, or when you create an outgoing excise invoice from a sales order, the system determines the various excise duties in the excise invoice using the information that you have entered here.
In addition, when you create a purchasing document, the system only uses the condition types that you enter here.
? For taxes on purchases, use the condition types contained in the tax procedure.
? For taxes on sales, use the condition types contained in the pricing procedures.
Standard settings
The standard system comes with sample settings for the tax calculation procedures and pricing procedures.
Use these settings as a basis for your own.
IMG > Logistics - General > Tax On Goods Movement > India > Account Determination
Define G/L Accounts for Taxes
Use
In this IMG activity, you specify which G/L accounts you will use to record which taxes.
Requirements
You have set up G/L accounts for each of the processing keys listed below.
Activities
Assign an account to each of the following posting keys. The accounts for VS1, VS2, and VS3 are used as clearing accounts during excise invoice verification.
? VS1 (basic excise duty)
? VS2 (additional excise duty)
? VS3 (special excise duty)
? VS5 (sales tax setoff)
? MWS (central sales tax)
? MW3 (local sales tax)
? ESA (service tax)
? ESE (service tax expense)
Specify Excise Accounts per Excise Transaction
Use
In this IMG activity, you specify which excise accounts (for excise duty and CENVAT) are to be posted to for the various transaction types. Enter all the accounts that are affected by each transaction type.
If you use subtransaction types, enter the accounts for each subtransaction type as well.
Activities
Transaction type UTLZ is used for determining accounts only while posting excise JVs and also if the payment of excise duty has to be done fortnightly.
The fortnightly CENVAT payment utility picks up the credit side accounts from the transaction types of GRPO, EWPO, and TR6C for determining the CENVAT and PLA accounts. There is no separate transaction type for fortnightly payment.
Example
Excise TT DC ind Account name
GRPO CR CENVAT clearing account
GRPO CR RG 23 BED account
GRPO DR CENVAT on hld account
Specify G/L Accounts per Excise Transaction
Use
In this IMG activity, you assign the excise and CENVAT accounts to G/L accounts.
When you come to execute the various transactions, the system determines which G/L accounts to post to by looking at the:
? Excise group
? Company code
? Chart of accounts
Furthermore, if you want separate account determination settings within an excise group, you can also use sub transaction types.
Requirements
You have already:
? Defined the G/L accounts
? Defined the excise groups
? Maintained the transaction accounts
Activities
For each excise group, assign the excise and CENVAT accounts to G/L accounts. For most businesses, one set of accounts will suffice for alltransactions.
Note
You need not remit the CENVAT to the excise department immediately, so maintain the credit account for transaction type DLFC as an excise duty interim account. This will be set off when you remit the duty.
Config setting needed to be done in order to get the Excise Details Screen in Material Master.
Even though this functionality is available in enterprise version, a small config step has to be made in Screen Sequences for Material Master.
Following document helps you to do this configuration.
? Material Master ? Logistics General ?1. Go to IMG Define Structure of Data Screen for each?Configuring the Material master Screen Sequence.
2. Select your screen sequence. Usually it would be 21. Select the same and click on Data Screen in the left frame.
3. Once the data screens are exhibited, select data screen no. 15, ie. SSq. 21and Scrn 15, which is "Foreign Trade: Import Data". Select the same and click on Subscreens in the left frame.
4. Go to the last sub screen i.e. 21-15-6 - SAPLMGD1- 0001 and select the same. Click on tab view subscreen and ensure that the subscreen is blank.
5. Now in the last sub screen i.e. no.6 you delete SAPLMGD1 - 0001 and instead add SAPLJ1I_MATERIAL_MASTER and in the screen no. 2205.
6. Save the setting.
7. Create a Material Master and check whether in Screen Foreign Trade - Import, Excise related subscreen appears.
Back to ERP Operation Home.
Transaction Codes for India
Transaction
Action
J1I2
Prepare a sales tax register
J1I3
Create outgoing excise invoices in batches
J1I5
Update the RG 1 and Part I registers
J1IEX
Incoming Excise Invoices (central transaction)
J1IEX_C
Capture an incoming excise invoice (excise clerk)
J1IEX_P
Post an incoming excise invoice (excise supervisor)
J1IF01
Create a subcontracting challan
J1IF11
Change a subcontracting challan
J1IF12
Display a subcontracting challan
J1IF13
Complete, reverse, or recredit a subcontracting challan
J1IFQ
Reconcile quantities for subcontracting challans
J1IFR
List subcontracting challans
J1IH
Make a CENVAT adjustment posting
J1IIN
Create an outgoing excise invoice
J1IJ
Assign excise invoices to a delivery for sales from depots
J1INJV
Adjust withholding tax Item
J1INREP
Reprint a withholding tax certificate for a vendor
J1IQ
Year-End Income Tax Depreciation Report
J1IR
Download register data
J1IS
Process an excise invoice (outgoing) for other movements
J1IU
Process exemption forms
J1IW
Verify and post an incoming excise invoice
J1IX
Create an incoming excise invoice (without reference to purchase order)
J2I8
Transfer excise duty to CENVAT account
J2IU
Remit excise duty fortnightly
J2I9
Monthly CENVAT return
J1IG
Excise invoice entry at depot
J1IGA
Create additional excise entry at depot
J2I5
Extract data for excise registers
J2I6
Print excise registers
Hope this will help.
Reward point if heful.
Thanks,
Raja

TDS not calculating at the time of advance payment to vendor

hello gurus,
need urgent help ,
TDS not calculating for advance payment made to vendor, checked configuration in detail. payment WT type is marked as central invoicing prop.all other config is o.k.
regards,
Anand

Hi Anand,
Mark the WT type as No central invoicing. U can still deduct TDS. Central Invoicing concept is mandatory only in Argentina.
what u have to do is, configure the WHT code and the WHT type for "Define Withholding Tax Type for Payment Posting".
Then include the same in the vendor master in FK02 under "withholding Tax accounting" tab. mark it as liable.
these settings in the master are enough.
then when u run the f-48 for downpayment, after entering the details in the first screen and u press enter, the system will give a msg that the vendor is liable for WHT.
this is how u can do it.
award points if helpful.
Regards,
CA. Karthik Narayan N S
SAP-FICO Consultant

Pricing procedure mm Packing and forwarding to be calculated on Basic price

Hi experts
we are having one pricing procedure where in details are as follows.
basic price                                                 100
excise                                                           12.36
total                                                             112.36
P & F 2 % 0n (112.36)                                   2.24
total                                                             114.60
Vat 5 % 0n (114.60)                                       5.73
Grand total                                                   120.33
Now we require new pricing procedure wherein Packing & forwarding to be calculated on basic price & not on basic + excise
so can we change in same pricing procedure or we have to create new ?
Can you elaborate with the configuration steps ? Any changes required in Tax procedure also or not ?
Thanks in advance
regards

Hi,
No need you can add the condition type to the pricing procedure at spro--mm---purchasing--pricing procedure ---calculation schema with proper calculation to get the percentage on base price and add to the total .
Regards,

RE:Education cess calculation Slab Rate change to 3%

Hi Friends,
I have one requirement changeing the Education cess slab Rate to 3% on TAX Payable amount ,Present my system is Calculating
Education cess 2% on TAX Payable kindly Any body Knows the solution send the details how to Change the configuration level
steps for indian payroll .
with regards,
Gopalrao

Hi!
There is an increase in education cess in both direct and indirect taxes.
in which part? that is in central excise, With holding tax or in service tax you require the procedure?
In case of central excise sap has relased notes for the increase in cess.
Regarding the with holding tax (TDS) and service tax both are GL based configaration need to configared accordingly.
1)In with holding tax you need to create new tax type for the higher edcuational cess and attach the same to vendor master.
2) Assign GL accounts in obww.
With respect to service tax you need to create a condition type, account key and go on creating a new tax code in FTXP.
Regrds

Calculation of basic dates and schedule dates

I update material master from routing with CA97 to material master
work scheduling data with base quantity 1000
When MRP running, planned order for 54000 PCS is schedule with work scheduling data.
when i schedule planned order (change)
the calculation basic date & schedule date differs for 19 days
cause basic start shift
why is this happend?
is this cause by rounding when transforming minute from routing to days in material master?
is this because i used shift sequence and scheduling with breaks?
some strage case again is
for base qty 1000 processing time is 0.97
for base qty 10000 processing time is 6.93
is there any solution for this case?
please help.
Best regards,
Freddy Ha

i forgot i used overlapping
sorry

Calculation of basic date and schedule date

I update material master from routing with CA97 to material master
work scheduling data with base quantity 1000
When MRP running, planned order for 54000 PCS is schedule with work scheduling data.
when i schedule planned order (change)
the calculation basic date & schedule date differs for 19 days
cause basic start shift
why is this happend?
is this cause by rounding when transforming minute from routing to days in material master?
is this because i used shift sequence and scheduling with breaks?
some strage case again is
for base qty 1000 processing time is 0.97
for base qty 10000 processing time is 6.93
is there any solution for this case?
please help.
Best regards,
Freddy Ha
Edited by: Freddy Halim on Jan 28, 2010 7:40 AM

Hi,
Yes. The schedule date is generated considering your factory calender also in addition to the routing data. For eg.. Suppose if Saturday and sunday are holidays, the schedule date will be extended to 2 days.
Pl. check the unit in your routing for the second query.
Pl. refer the link
http://help.sap.com/saphelp_47x200/helpdata/en/b1/c042b7439a11d189410000e829fbbd/frameset.htm
Madhava

TDS also calculated on Partial as well as Full PAyment

Dear All
I have a Vendor which is subject to TDS. After an invoice is being raised, TDS is calculted properly.
But the problem is that, when I go to pay him either in Full or in Partial , the system is calculating the TDS on the balance amount.
But it should not do double TDS for the same transaction.
Please guide me.
Thanks and Regards
Kanwaljit

Hi
Remove the payment tax codes from vendor master. then system will not deduct TDS automatically the time of payment nor you will be required to remove payment TDS code at the time of payment.
At the time of Down Payment system will give pop up message to enter the TDS code.
Regards
Vikas Gupta

TDS not calculating in Down Payment

Dear All,
I have done the config for TDS for Both Invoice & Payment. while doing FB60(invouice), its calculating TDS perfectly. But while doing F-48 (DP Payment) its not at all calculating TDS. Kindly please guide me where I am going wrong.
regards,
R.Ramakrishnaraj

hi,
1) Check the GL field status group (G067)for that Reconciliation account and make with holding tax field optional.
2) Check your vendor master that whether You have assigned the Withholding tax type and tax code are assigned or not .
3) The check box LIABLE for withholding tax should be tricked
4) Please note that while printing the TDS certificate you have to apply SAP Notes.
Regards,
Anish

Rebate calculation from Basic Price PR00

Hi,
This query is related to rebate conditions. At present the rebate base is calculated from the subtotal, that is Basic price - discount(The subtotal 7 is assigend to the step 300).
As per the requirement from the business, the rebate should be calculated from the 'Basic Price'. They don't want the discount value should be considered in the rebate calculation. I explained them regarding the burden which company has to bear, but the business still want to go with the changes.
My plan is to create another step in the pricicng procedure right after the basic price and assign subtotal 7 to it and delete the exting reabte subtotal step, and assign the new step number to rebate conditions, so the reabte will be calculated based on this.
My questions are:-
1. Can I edit the existing pricing procedure to make these changes?
2) Will there be any impact on the existing rebate agreements (open) and its settlements on a later date?
3) Will there be any impact on the process of billing of open sales orders/deliveries (not billed) after the change in pricing procedure?
Please guide me.
Regards,
SAM

Hi Ivano,
Thnak you very much for your suggestion.
As the note says, the best way is to copy the existing pricing procedure and create another and assign it in OVKK.
Will there be any effect for partially billed delivery items? (at the time of creation of billing document for the unbilled items in the delivery)
OR
when we create a billing document from the delivery (in the case of sales order and delivery created with old pricing procedure and the billing document is getting created after the assignment of new pricing procedure)
Your valuable suggestions will be highly appreciated.
Regards,
SAM

[Urgent] Need help calculating difference between two dates

I'm trying to write a code to display the current day and time, then accept two dates from the user and display the difference between the two dates. To display the current date and time, I've used the SimpleDateFormatter library but I'm having difficulty calculating the difference between two dates. Could someone please help me with this?
Below is my code so far
import java.util.Date;
import java.util.Scanner;
import java.text.SimpleDateFormat;
public class DateFormatter {
     public void displayNow()
          Date todaysDate = new Date();
          SimpleDateFormat formatter = new SimpleDateFormat("yyyy-MMM-dd HH:mm:ss");
          String formattedDate = formatter.format(todaysDate);
          System.out.println("Today's date and time is: "+formattedDate);
     public void calculateDifference(Date startDate, Date endDate)
          /* This is whre i need help! */
     public static void main(String[] args)
          DateFormatter df = new DateFormatter();
          Scanner sc = new Scanner(System.in);
          df.displayNow();
          System.out.println("Please enter a date: ");
          String date1 = sc.next();
          System.out.println("Please enter another date: ");
          String date2 = sc.next();
}The methods displayNow() and calculateDifference(Date startDate, Date endDate) are essential and cannot be skipped out.

tarahmarie101 wrote:
Dude. I've tried doing assignments under pressure, and it doesn't work. Here's a piece of free advice. Start earlier next time, don't put "urgent" in the title of your post b/c it just pisses people off around here--and is a sure sign of an overdue homework assignment which no one around here likes helping with, and try to ask intelligent questions--don't just say "Help me!"
Of course, it takes some time to learn what the intelligent questions are. You have my sympathy. Try asking questions about how to do a particular task, instead of asking people to tell you what to do. It starts to get easier after a while.
actually dude i started on this on monday.. but there were so many other stuff to do along with this.. and i did try referring up the Calendar utility but it was a bit confusing actually.. it was only after that did i come to this forum.. nor am i very good at Java.. anyhoo thanks for your sympathies :P

Urgent due date calculation in vendor ageing(plz solve)

hi everybody there
i have to calculate the due on date
which is calculated as
dueon = BLINE Date (BSIK-ZFBDT) + No of Days(BSIK-ZBD1T)
for this i am using fm
RP_CALC_DATE_IN_INTERVAL
but it is not working .
could u suggest that what is going wrong with this
fm.
i am calling this fm in following code but it is not working , it is going to dump.
could any one suggest me how to use the above fm in my following code so that i will be able to calculate due on date based on above formula.
my code is as follows
*& Report Z_VENDOR AGEING *
*& in this repoet I am calculating the vendor ageing
 which is depending on formula
 AGEING = Current Date(or any date entered by user) Bline Date(BSIK-ZFBDT) *
REPORT z_vendor NO STANDARD PAGE HEADING
 LINE-SIZE 200
 LINE-COUNT 65(3).
TABLES : bsik.
DATA : BEGIN OF t_out OCCURS 0,
 bukrs LIKE bsik-bukrs,
 saknr LIKE bsik-saknr,
 bldat LIKE bsik-bldat,
 wrbtr LIKE bsik-wrbtr,
 lifnr LIKE bsik-lifnr,
 zfbdt like bsik-zfbdt,
 zbd1t like bsik-zbd1t,
 ageing type i,
 END OF t_out.
parameters : p_date1 type d.
SELECT-OPTIONS : s_bukrs FOR bsik-bukrs,
 s_saknr FOR bsik-saknr,
 s_lifnr FOR bsik-lifnr.
SELECT bukrs saknr bldat wrbtr lifnr zfbdt
 FROM bsik
 INTO TABLE t_out
 WHERE saknr IN s_saknr
 AND bukrs IN s_bukrs
 AND lifnr IN s_lifnr.
Loop at t_out.
CALL FUNCTION 'DAYS_BETWEEN_TWO_DATES'
EXPORTING
 i_datum_bis = p_date1
 i_datum_von = t_out-zfbdt
I_KZ_EXCL_VON = '0'
I_KZ_INCL_BIS = '0'
I_KZ_ULT_BIS = ' '
I_KZ_ULT_VON = ' '
I_STGMETH = '0'
I_SZBMETH = '1'
IMPORTING
 E_TAGE = t_out-ageing
EXCEPTIONS
DAYS_METHOD_NOT_DEFINED = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Modify t_out.
Clear t_out.
Endloop.
LOOP AT t_out.
WRITE : / t_out-saknr,
 t_out-lifnr,
 t_out-wrbtr,
 t_out-zfbdt,
 t_out-ageing.
ENDLOOP.

hi sanjeev,
chnage ur code.
note the bolded part.
TABLES : bsik.
DATA : BEGIN OF t_out OCCURS 0,
bukrs LIKE bsik-bukrs,
saknr LIKE bsik-saknr,
bldat LIKE bsik-bldat,
wrbtr LIKE bsik-wrbtr,
lifnr LIKE bsik-lifnr,
zfbdt LIKE bsik-zfbdt,
zbd1t LIKE bsik-zbd1t,
ageing TYPE i,
END OF t_out.
PARAMETERS : p_date1 TYPE d.
SELECT-OPTIONS : s_bukrs FOR bsik-bukrs,
s_saknr FOR bsik-saknr,
s_lifnr FOR bsik-lifnr.
SELECT bukrs saknr bldat wrbtr lifnr zfbdt zbd1t
FROM bsik
INTO corresponding fields of table t_out
WHERE saknr IN s_saknr
AND bukrs IN s_bukrs
AND lifnr IN s_lifnr.
if sy-subrc <> 0.
message 'no data' type 'S'.
endif.
LOOP AT t_out.
 CALL FUNCTION 'DAYS_BETWEEN_TWO_DATES'
 EXPORTING
 i_datum_bis = p_date1
 i_datum_von = t_out-zfbdt
I_KZ_EXCL_VON = '0'
I_KZ_INCL_BIS = '0'
I_KZ_ULT_BIS = ' '
I_KZ_ULT_VON = ' '
I_STGMETH = '0'
I_SZBMETH = '1'
 IMPORTING
 e_tage = t_out-ageing
 EXCEPTIONS
 days_method_not_defined = 1
 OTHERS = 2
 IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
 ENDIF.

data : dueon like t_out-zfbdt.
dueon = t_out-zfbdt + t_out-zbd1t.
write dueon.
 MODIFY t_out.
 CLEAR t_out.
ENDLOOP.
rgds
anver.
if hlped mark points
LOOP AT t_out.
 WRITE : / t_out-saknr,
 t_out-lifnr,
 t_out-wrbtr,
 t_out-zfbdt,
 t_out-ageing.

Need Urgent Help on Calculation items issue In Discoverer Plus

Dear Discoverer Experts,
I would need help on the below scenario:
A
147644.08
147644.08
Maximum: 147,644.08
B
142494.65
5149.43
Sum: 147,644.08
C
5149.43
142494.65
0
Here A, B, C are columns and C column is Calculated Item(A-B) and Maximum and Sum are Totals items, everything working fine.
The intent is that I would need the difference between totals items I mean Maximum and Sum , i.e Maximum-Sum (147,644.08 - 147,644.08) =0(in this case), but I am not able to get it, can anyone help me on this that would be greatly appreciated.
Thanks
skat

Thanks Tamir for your response, i am getting ZERO
But when i create new calculation item for examle TEST with calculation MAX(A) over () - SUM(B) over ()
then i am getting new column next to C with name TEST and with two rows of data with 0 (Zero)
like this
TEST
0.00
0.00
why am getting two rows of data, and that too can't we get this ZERO under C column at the same Row as MAX and SUM
(Or)
if not possible then after adding coumn TEST next to C column can we get ZERO in the row as MAX and SUM
either way would be fine, can any one hlep on this issue.
Thank you
skat

Urgent : TDS - Cess Calculation on Basic + Surcharge

Similar Messages

Maybe you are looking for