Urgent:The PR was splited into two requirements in MRP list

Dear All,
I came across an strange scenario: when checked the material *** stock/requirements in MD04 within Plant A, i found
that it is different from relevant stock/requirements in Plant B, a PR was splited into two requirements in B which was not what
we wanted. But when MRP run again, the result was correct.
Process as follows:
Pr (plant A)-->(ALE)-->LSF(plant B)-->PR (plant B)
Now this cases had had a serious effort on our purchasing plan.
Could you please help me to analyse it? Thanks!

Hi,
From your post the understanding is :
You have two plants : Plant "A" the planning plant and Plant "B" the production plant
The demand in plant "A" creates a pland.order or pur.req which is a intercompany PR.
the PR from Plant "A" is transfered or ALE d through ( Background job ) as a requirement in plant "B" which after the MRP run in Plant "B" generates a PR.
this scenario would have serious business reasons ( Like Plant "A" can also be used for return materials or to have a planning data clarity or the configuration may be for both MTO and MTS scenario's )
If you can just give hint of your business type i can explain you the reasons and tell you about the settings.
thanks,
Prakash

Similar Messages

Selected "Edit in Audition," audio track was split into two files. Preference change?[image included]

I have no idea what kind of shortcut key or preference I changed.
When I select any video on any premiere timeline to "edit in audition" i end up with the audio getting split into two wav files instead of one, as the red rectangular shows. Instead of the single audio track to edit in which you can see in the blue rectangular.
***The blue rectangular I got when I dropped a video directly into audition.
Update: did some testing around in premiere, this issue only happens with clips that are on a timeline, but if I "edit in audition" from "project" (main folder with all material), I can edit it properly.

Its one file with two different dispalys.
You can pull the bottom one down by dragging it down or hit the very little triangle on the right side.

Why is the hard disk split into two data partitions (C:Vista and E:Data)?

I've just switched on a new A200-1V0 and found that the disk space is split into two equal sized partitions "C:Vista" and "E:Data" (and a small EISA one).
WHY? What is the logic and purpose? It's not even as if the the C:Vista partition is smaller and intended solely for "system" stuff as the the "Users" (User Documents) root is on it too.
Is this the default for Vista (my first use of it), if not, who said Toshiba could do this without asking me?
How do I move the "Users" root in Vista (to the Data partition) - if I've got two partitions I might as well use it?
Can I resize partitions in Vista without a 3rd-party utility (or a complete backup/restore)?
Thanks

Hello Just YOU
Please do not be upset because there is no reason for that. You have bought new product with factory settings. Toshiba and any other hardware manufacturer do not know each customer personally and, unfortunately, it was not possible to ask YOU how to configure YOUR notebook.
Because of that there is Product Recovery media that allows you to configure HDD according to your wishes and needs.
Please use this DVD and install OS how you want to have it. When recovery procedure starts you will see SETUP option on the right side. Click on it and choose the right option.
Install OS again and enjoy your life. I really do not have time to write about vantages of two partitions because it is basic stuff and you probably do not want to loose your time reading this.
Bye and good luck!

My Fusion Drive was splited in two

Hi to everyone.
I bought a mac mini late 2014 with fusion drive last month. My brother did the initial configuration with his apple id. When I tried to change to my apple id I didn`t get it. Then, I use ˜Find my Mac~to erase the mac mini and start over. But, when I tried to install OS X again the Fusion drive appeared splited in two: 120GB of SSD and 1TB of SATA HDD. I did the installation but now, I have two drive units in mac.
How can I join/merge these partitions? Am I need to reinstall OS X?
Thanks

Allan Eckert wrote:
There are command line instructions to create a Fusion Drive available on the web.
No need for any command lines.
Before doing any of below steps, if there is anything on the Mac Mini that needs to be saved, make sure that you have a valid backup of it: Mac Basics: Time Machine backs up your Mac - Apple Support
Start your mac and boot to Internet Recovery - power ON Mac Mini and after releasing power button (before mac's chime) press and hold ALT+CMD+R: let go buttons when you see spinning globe or - if you are using WiFi connection - when on the screen appears prompt to select WiFi network.
OS X: About OS X Recovery - Apple Support
When Interent Recovery is loaded, after prompt with choosing prefered language, select Disk Utility app and choose continue.
Next, select on the Disk Utility sidbar one of the disks that should be combined as Fusion Drive: Disk Utility will recognized that there is a problem with Fusion Drive and will prompt with question if you want to fix it. Selecting "FIX" button will re-create Fusion Drive and most likely erase all data on both drives.
More info: Mac mini (Late 2012 and later), iMac (Late 2012 and later): About Fusion Drive - Apple Support - check section "Lern More - Troubleshooting".
EDIT:
Learn more
Troubleshooting
The version of Disk Utility that comes with Fusion Drive is unique. Earlier versions of Disk Utility can't be used with a Fusion Drive.
If your system will not start because you see a flashing question mark or another alert:
Press the Power button and hold it down to power off your system.
Press the Power button again. After you hear the startup chime, press and hold Command-Option-R to start up to the Internet version of OS X Recovery.
A globe should appear with a "Starting Internet Recovery" message. It is now OK to release Command-Option-R.
A progress bar should appear and Internet Recovery should start and ask you to select a language.
Once you select a language, click Disk Utility in the window that appears and then click Continue.
If your Fusion Drive can be fixed with Disk Utility, you'll see a Disk icon with red lettering. Click the disk icon.
A dialog box appears offering to fix the Fusion Drive (shown above). Caution: Clicking Fix will erase your Fusion Drive. If you have a Time Machine backup of your Fusion Drive Mac, see Mac 101: Time Machine for information on how to restore from a Time Machine backup once the drive has been erased.
After the process is complete, the volume will change color to black. Quit Disk Utility, click Install OS X, then click Continue.

Can I split the contents of characteristic into two key figures?

Hi experts
I have a characteristic that represents a discount. It is entered into SAP as Nnn or Pnn where N means negative and P means positive and the nn is a two-digit number.
Within my query, I need to be able to add this discount to another discount type (which IS conveniently entered as -nn.nnn!) and get "total discount". If I can get the N/P and nn parts of the characteristic into separate key figures I'll be able to create my "total discount" formula.
This would be so simple to do in code, but can I do it within the query?
Thanks for any guidance
Brigitte

Ravi
I already tried that but couldn't get it to work. I thought the offset stuff would do the trick but it didn't work - I just got 0 instead of the two-digit number I was expecting. (I put in offset start = 1, offset length = 2 to try to get the nn part of the characteristic.) Also, I couldn't figure out how to get the N or P part of the characteristic as the formula variable dimension doesn't allow characters.
If you can be more specific about what I should be doing, please reply and I will try what you advise.
Thanks
Brigitte

The Same Album is Split Into Two On My iPod

Okay this may be hard to explain but here it goes...
I bought a CD, and imported it onto my iTunes library. No big deal. It imported fine. Then I tried importing it onto my 4th Generation iPod Touch (32GB). The album has 10 tracks, and it was split into two on my iPod. One album has all tracks 1-10, while the other has tracks 2-10. But when I search up the song on my iPod (on the songs list), it only comes up as one. I tried deleted the album that has tracks 2-10, but when I do, the tracks 2-10 on the other album get deleted, so I'm only left with Track 1.
This is starting to get really confusing for me and I don't know what to do. In my iTunes library it comes up as one album, on iTunes when I look at my songs list it comes up as one album, and even on my actual iPod on the songs list, there's only 1 version of each song, but on the albums list, there's 2 versions of the same album.
Please help! Thanks so much !!

In iTunes on your computer right click on the songs and select Get Info and look at the sorting. From iTunes Help
Tips for using song and CD info to organize your music
You can edit information in the Info window to make it easier to find and sort items in your library. For example, you can:
Group individual movements on a classical CD into one work by indicating the name of the work (for example, “Piano concerto in A Minor, Op. 54”) in the Grouping field.
Group songs that are part of a compilation together in your library by clicking Details and selecting the checkbox next to “Album is a compilation of songs by various artists”.
Identify the individual artists on a tribute album in the Artist field, and type “various” in the Album Artist field.
Create your own genre category by clicking Details and typing the category in the Genre field.
Change the order in which tracks on a CD play by changing the numbers in the Track fields.
Create a Smart Playlist that includes only songs that are just the right speed for your workout by typing the number of beats per minute in the BPM field. For instructions, see Create a Smart Playlist.
Identify a movie as a music video (click the Options button, and choose Music Video from the Media Kind pop-up menu).
Identify an item that you imported from a CD as an audiobook, so it appears under Audiobooks instead of Music (click the Options button and choose Audiobook from the Media Kind pop-up menu). If you do this, iTunes also remembers your place in the audiobook.
Enter custom sorting criteria for an item. Select the item, choose File > Get Info, click Sorting, and enter the custom text.

I purchased an album recently, and one of the songs was not recorded into the folder with the rest of the songs. How do I get that corrected?

I recently purchased and downloaded an album from the itunes store. One of the songs (#2) was not stored correctly with the rest of the songs and now my album is missing one song. The song was stored into a separate folder, under a generic file name; not associated with the orignal album. How do I get this corrected?

Hello Kent
The easiest way to correct it would be modify the song so that it matches the same information as the rest of the album. The following article will assist with that process.
iTunes: Adding or modifying information about songs
http://support.apple.com/kb/ts2530
Thanks for using Apple Support Communities.
Regards,
-Norm G.

ORDERS Idoc splitting into two

Hi,
   I have requiremnt where i need to Split Orders idoc into messages.
   1. Orders XML file 2.XML file only with control record fields.
i have seen all the discssion on this and deceiced to implement the scenario as per
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible   blog. But the problem is need to use two message types on the target side.. for splitting the message..
ORDERS and Contrlo record Fields message type... i can't change the standard idoc..
Can i add the Control record fields to Standard IDOC in any way....   like exporting file...if so..
tell me whether the Idoc will split into two messaged or not....
Regards,
Deep

My doubt is in the mentioned blog target msg type was created one.. here i need to take with ORDERS idoc(ED in our case). I need to split the IDOC everytime when it triggers based on RCVPRN field value.. this value is always so there should be 2 values everytime.
you will need to duplicate the IDOC at the target side to achieve this...if you are successful in doing the 0...unbounded thing for your IDOC....
1) Duplicating:
Duplicating is not Multimapping.....Multimapping is what you saw in the blog and duplicating is right-clicking on the node and choosing Duplicate Subtree....no two messages will be created in this process (duplicating).....
2) Multimapping:
it is used to create two (or more) different messages at the target end...
Does it split into two message ( ORDERS XML and Control Record XML)
No it wont split the IDOC into two messages.....
So if your requirement is to have only one target message with seperate IDOC nodes..having ORDERS and Control data individually...then go for duplication method...apply the condition for RCVPRN to generate the nodes...
If your req is to have two different messages at the target then use multimapping apply the condition for RCVPRN to generate the two different messages.....
Hope it helps...
Regards,
Abhishek.

How do i set an appointment into my iphone and get a warning sign for the appointment to date into my agenda ?

Since IOS5.1 , I been having a hard time getting my agenda to show my appointments and give me a warning sign like alarm or a reminder alarm for them .
Now since the new update we have had one app split into two and gotten reminder and agenda .
Now i have been using o r better said been trying to use the reminder , to get my appointments set right .
But it seems to be that i do not get a warning of any type from my phone about the coming date , i set up the reminder for in the first place .
Before ios5.1 the reminder was intergrated into the agenda and for more easy to use since the new .
Now the agenda has no more option to also add birthdays and other handy reminders which are on a yearly bases .
I have been trying to find out if i missed something or other , and come to the conclusion that i see no options aviable to either enable or disable anything of the sort to change this .
Also i have been reading the manual and i notest that in there is no reminder of how this new stationary app from apple itself works and explained .
Anyone can enlighten me about this please , thank before hand and greetings from verbodentoegang

So I have bought a couple of apps on my iphone and would like to transfer them to my itunes library, but not sure how.
iTunes > File > Transfer purchases
When I plug in my iphone and try and sync the two, I get a warning from itunes that everything on my iphone will be wiped and everything from my itunes library will be moved to it.
Have you changed the computer you are syncing with?

Break sap standard role into two sub roles

hi,
i have one SAP standard role. now i want to break this role into two sub roles. how shall do it.
please suggest me.
regards
ramesh
Edited by: Ramesh Sammiti on Jul 31, 2008 11:00 AM

Hi Ramesh,
When you say that you want to split the SAP Standard role into two roles:
1.Do you mean to say that you want to split the transactions and authorization data of the SAP Standard role into two separate Z* or Y* roles?
2.Do you want to copy the SAP Standard role into two different Z* or Y* roles and then modify the authorization data according to your company's requirements?
In the above two scenarios you must copy the SAP Standard role into Z* or Y* roles in PFCG transaction with the appropriate naming convention and make necessary changes in both the transaction data and the authorization data.
Please be clear which SAP Standard role you are willing to split into roles and i can provide more details.
Hope this helps.
Regards,
Kiran Kandepalli

How will I be able to make the TestStand UI objects into XP theme?

Hi, I am using TestStand UI in .net, How will I be able to make the UI objecys of TestStand to adapt the XP theme?
Is there any example code that you can give me? Thanks!
Solved!
Go to Solution.

The shipped TestStand .NET Operator Interface has a manifest file included in the project. This manifest file includes the Micrsoft.Windows.Common-Controls which is needed to identify the XP theme that has been configured on the operating system. In the shipped .NET Operator interface, this .manifest file is being embedded into the executable and formats the TestStand Operator Interface to display the XP theme that has been configured on the operating system. in the shipped TestStand 4.1.1 Operator Interface, the manifest file is embedded into the executable in a Project post-build event.
There are three things that the manifest file is required to have in order to allow the TestStand Operator Interface executable to adapt to the XP theme. They are as follows:
The manifest file must have the same name as the executable. For example, if your executable is named MyExecutable.exe, your manifest file is required to have the name MyExecutable.exe.manifest.
The manifest file must include the Micrsoft.Windows.Common-Controls in order to identify the XP theme that has been configured on the operating system.
The manifest file must reside in the same directory as the executable.
If you are building on an existing Operator interface that ships with TestStand 4.1.1, make sure that the manifest file meets these two requirements. If it does you can test that the theme is properly adapting by selecting Debug»Start Without Debugging.
If this works properly, you can rest assured that when building a release version of the TestStand Operator Interface, it will adapt to the XP theme that has been configured on the operating system.
NOTE: that you can only test this feature if you launch the executable without debugging because this allows the executable to run its own process. If you run the executable with debugging, the Visual Studio environment will host the process and will not allow the manifest file to be embedded into the executable.
-Adri
Message Edited by Adri K. on 03-04-2009 04:15 PM
Adri Kruger
National Instruments
LabVIEW Product Marketing
Attachments:
matching names.jpg ‏27 KB
debug.jpg ‏20 KB
manifest.jpg ‏65 KB

Merging video clip separated into two clips in camera

Working with a Canon 5D mk3 and a single clip was separated into two clips by the camera. Trying to merge them back into a single clip so that I can then merge into a multiclip arrangment with footage from second camera and off camera audio. Have followed the following process from support:
http://documentation.apple.com/en/finalcutpro/usermanual/index.html#chapter=29%2 6section=4%26tasks=true
When dragging the selection back into the Browser, a single file is not created but rather the two separate files.
Suggestions?
Thank you.

The only way for FCP to stitch separate shots is if it is shot in a format that is supported by the Log and Transfer function, and if the camera is designed to merge the clips into one shot via the metadata. For example, P2 breaks up the footage into 4GB chunks, due to the P2 card format's 4GB file size limit. AVCHD will do the same thing, as will XDCAM. But the metadata recorded by the camera informs the NLE that they are essentially one clip, so when you convert via Log and Transfer, FCP (And Avid, and Adobe) will stitch them together.
But this only works with supported formats. H.264 from DSLRs...not supported...by any NLE. Even though you can L&T Canon 5D Mark 2 footage (Mark 3 is unsupported, as it is a newer camera, and FCP was discontinued before it came out), it still keeps the media separate. Sorry...that's the drawback to shooting DSLRs. The ones that shoot AVCHD...will be stitched, because they have advanced metadata support.
FCP-X will multiclip these separate files, however. Because it doesn't have issue with broken clips. It's the best multicam function of any NLE.

Movie and iTunes Extras Split into Two FIles

I download most movies on my Windows 7 machine. It downloads just fine as does downloading movies on my two Macs. Things get a little weird when I use the iTunes feature "Show items not in my library" to keep all the copies of iTunes with the same downloads. When I copy from one machine to another, the movie icon in the Movies Library on the receiving machine breaks into two identical icons with different file names. For example, The Last Airbender - iTunes Extras & The Last Airbender. Is there any way for me to get these things to fuse back together?
Thanks,

Try this:
When you download iTunes Extras movies, the extras will be downloaded to your iTunes Music/Downloads/Movie_Subfolder. The actual movie usually is in the iTunes Music/Movies/Movie_Name folder. Go back to the Downloads/Movie_Subfolder and cut and paste the files from the .tmp folder into the same folder as the iTunes Music/Movies/Movie_Name folder.

Split ALV Column heading into two

Hello All,
I have a ALV Column Header - ALV LIST - SAP 46C.
Material   | Info Type | Quantity | Price etc..
Due to space contraints and other reason client needs to split the Info type column into two.
Material   | Info | Quantity | Price etc..
           | Type   |
The data records should not have any additional blank lines.
How to achieve this?
Thanks,

You have to assign X to layout property no_colhead.
Then write your heading using write statements.
Here is the exact example you are looking for [Create Multiple Lines Header In ALV List Report|http://www.freesaptutorial.com/create-multiple-lines-header-in-alv-list-report/]

Battary from the laptop was not her turn

The laptop was plugged into the socket. I staked the adapter from the socket, the screen become black. although I did everything gently, I could not start the laptop. when I press the power button LED lights up very quickly and out but the screen remains black. my laptop has no warranty. what should I do? how can I fix this problem?

Sasi,
There are many different g6's, so that is not the product number. I'd suggest calling in and speaking to a live rep, since you should still be in warranty if you purchased new.
If you live in the US, contact HP Here.
If you are in another part of the world, begin Here.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Urgent:The PR was splited into two requirements in MRP list

Similar Messages

Maybe you are looking for