URJECT - License (Restart Problem in the development system)......

Hi All,
After successfully installing Licence in ECC6, then getting following error when we attempt to re-start.
Faulting application dispwork.exe, version 7000.146.14.41964, faulting module dispwork.exe, version 7000.146.14.41964, fault address 0x000000000003b6af.
The application, E:\usr\sap\SDF\SYS\exe\run\disp+work.exe, generated an application error The error occurred on 09/30/2008 @ 17:17:31.889 The exception generated was c0000005 at address 000000000043B6AF (disp_work!DpVmcCheckDebugProxy)
Please investigate AND let me know.....ASAP.
With Regards,
Lolla.

Hi Brahmankar,
After installing we can able to enter via sap* for installing license.
But after installing when we restart the system then only problem is coming as above.....
please help in this regard.
With Regards,
Lolla.

Similar Messages

Problem in BW development system.

Hi Experts,
I have problem with BW development system, some of the loads are failed freuently in the BW development and test clients, but they never fail in the production client.
and the error message I am able to see in the Header tab is
"IDocs were found in the ALE inbox for Source System that are not updated.
Processing is overdue."
So I am resolving the issue by " updating manually in OLTP system"
So can any one help me out what will be the problem and how it will be prevented permanently.
regards
sekhar

Hi,
In the system, the Basis team will setup a number of processors for certain specific jobs (you can view them via SM51), and they're ENQUEUE (1), DIALOG (about 6-7), BACKGROUND (3?), SPOOL (2). Each of them serve specific usage. Now when a BI* job comes into the system, it tries to run the job through the Background processors, and also locking up certain tables using the Enqueue. However, if at the point of running the job, there's already someone locking up the table or taking up all the background processors, this BI* job will have to wait until the lock is released or that the background processors are freed up. Hence this could lead to time out on the BI* jobs. It is very common for DEV to be setup with minimal number of processors for each, since the usage is pretty much restricted to the Development team alone.
As for the number of dialog processors, I recalled that there's an OSS note advising on the number of processors to be setup in the environment as a basic setup.
Of course it is also wise to check on the BD87 and the dumps - ST22 and SM21 transactions to find out more information on the reasons of termination.
Thus, frequent termination of jobs is usually related to hardware constraint, or genuinely some configuration setting in the IDOC setup.
Hope this helps.
Cheers,
Gimmo

For one Urgent Change during performing the Approval(chnging the status to 'To be Tested') system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.

For one Urgent Change while performing the one of the Approval before changing the status to 'To Be Tested'
We are getting below error.
The system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.
COuld anyone please help us to know, How it can be resolved?
We also have this below error.
System Response
If the PPF action is a condition check, the condition is initially considered as not met, and leads to another warning, an error message, or status reset, depending on the configuration.
If the PPF action is the execution of a task in the task list, and the exception is critical, there is another error message in the document.
Procedure
The condition cannot be met until the cause is removed. Analyze all messages in the transaction application log.
Procedure for System Administration
Analyze any other messages in the task list application log, and the entries for the object /TMWFLOW/CMSCV
Additional Information:
System cancel RFC destination SM_UK4CLNT005_TRUSTED, Call TR_READ_COMM:
No authorization to log on as a trusted system (Tr usted RC=0).
/TMWFLOW/TU_GET_REQUEST_REMOTE:E:/TMWFLOW/TRACK_N:107
For above error Table /TMWFLOW/REP_DATA_FLOWwas refreshed as well but still the same error.

If you are in Test System, you can use function module AA_AFABER_DELETE to totally delete the depreciation area (tcode SE37, specify chart of depreciation and depreciation area), After that recreate your depreciation area and run AFBN. But before you do that, have you created a retirement transaction type that limits the posting on your new depreciation area? If not create one.
Hope this helps.
Thanks!
Jhero

'A problem with the cooling system' error message on Satellite A660

Hi all,
Hope I can get some help here. I've had about 5 HP laptops after all of them had problems and faults. I got sick of them and therefore got a refund and bought a high spec A660-1FH.
The A660 has been a great laptop for two days until yesterday when I started getting a warning message saying 'A problem with the cooling system has been detected. Please turn off the computer immediately, and return it for service'.
The cpu fan works fine as you can here it spinning and the temperature of the i5-460m processor is around 40 degrees for both cores - which seems normal to me. I've noted that it happens only when running on battery and if you switch from eco utility to power saver mode. Its fine when running on the 'balanced' power setting. The fan is louder before when this message appears.
As its under 28 days my retailer swapped it for a brand new one straight away. Got the new one home, and the same message appears again. Has anyone else experienced this. As two laptops have had this, I'm wondering if this is normal for the A660 series laptop or if there is really a hardware issue?!
I have tried to upgrade eco utility and the bios of the laptop but both are the latest versions. Can anyone help or share if they experience a similar issue with their laptop?
Thanks

In front of me I have Satellite A660-13Q (PSAW3E) and I have it about 6 weeks now. It runs almost 10 hours daily and until now I didnt notice such message or anything else that can be suspect for hardware functionality.
I really dont know why this happen on your notebook and dont think there is anything you can do about it.
I would exchange it again. What you can also try is to contact nearest Toshiba service. Make a call, explain the situation and ask if they can help you with this.

A problem with the cooling system has been detected

I bought a new computer not to long ago, I've had it for almost a month now. It runs fine, and I've had no problems until not too long ago. I was playing a game, and I got a random error message: "A problem with the cooling system has been detected. Please turn off the computer immdiately, and return it for service." I don't understand how or why this came up, and I don't have any money to return it for any type of repairs. After I got this message, I left my computer off for about an hour. All seems well so far. Any suggestions?

What laptop do you have?
- Peter

Problem with the EFI system partition's file system.

I installed latest yosemite 10.10.2 update - did a verify disk on “WDC WD1001FALS-403AA0 Media” (internal HD on my iMac 21.5-inch, Mid 2011) and got
Problems were found with the partition map which might prevent booting
Error: The partition map needs to be repaired because there’s a problem with the EFI system partition’s file system.
However a verify disk on the volume partition gets a clean bill of health!
I haven't done a 'repair disk' yet. Thought I'd check if anybody else has same message first.
Cheers

I had issues where my MacPro 8-core would not boot after the 10.7.4 upgrade, but my MacBook Air 13" 2011 upgrade worked just fine.
I had to restore my MacPro HD from my TimeMachine back up. Apparently, the Softraid raid drivers that I use on my MacPro are not compatible yet with 10.7.4. See here for more info:
http://macperformanceguide.com/blog/2012/20120511_1-MacOSX-SoftRAID.html
I contacted Softraid and they are already aware of the issues and are working with Apple for a fix.
Cheers.
Bud

Has anyone had a problem with TapMedia File Manage on iPhone 5. I reported a WIFI functionality problem to the developer and asked for support. Instead they have been very unprofessional by name calling me instead of logically evaluate and troubleshoot th

Has anyone had a problem with TapMedia File Manage installed on iPhone 5? I reported a WIFI functionality problem to the developer and asked for support. Instead the company has been very unprofessional by name calling me instead of logically evaluate and troubleshoot the problem

Hi AKE1919,
Welcome to the Support Communities!
The following information should help you with this:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/HT1933?viewlocale=en_US
Cheers,
Judy

MacBookPro SSD Error- ALERT: The partition map needs to be repaired because there's a problem with the EFI system partition's file system.

MacBook Pro OS x Mavericks. I have Sandisk 256GB SSD and I am getting a below error message.
ALERT: The partition map needs to be repaired because there's a problem with the EFI system partition's file system.
Does anyone know how to resolve this error and fix it ? unfortunately I don't have a Time Machine backup. Thanks!

Have you tried to run the verify/repair permissions and verify/repair disk through the recovery disk? If that didn't work then I would reinstall the OS after backing up. If that still doesn't work I would take it in.

Want to know all the Details in the Development system

Hi Gurus
I have one requirement.
I want to know the list of available Custom:
1. Interfaces
2. Enhancements
3. Tables
4. Function Modules
5. BADI's
6. Reports
in the Development system
How we can achieve this.
Please let me know the needful.
Regards,
Sree

Hi Sree ram
Check the tables :
modsap (For Enhancements)
tfdir (For Function Modules)
tadir (For Reports)
dd02l (For Tables)
Regards,
Swapna.

TS1702 I just upgraded a full version of "ISO Fits" app from App Store 2 days ago but the upgrade wasn't successful. I reported the problem to the developer but had not received any reply. What should I do?

I just upgraded a full version of "ISO Fits" app from App Store 2 days ago but the upgrade wasn't successful. I reported the problem to the developer but had not received any reply. What should I do?

1. You did not get an error message telling you that your iPhoto library was getting full. You got a message telling you that your HD was getting full, right?
OS X needs about 10 gigs of hard drive space for normal OS operations - things like virtual memory, temporary files and so on.
Without this space your Mac will slow down as the OS hunts for space on the disk, files will be fragmented, also slowing things down, apps will crash and the risk of data corruption - that is damage to your files, photos, music - increases exponentially.
Your first priority is to make more space on that HD. Nothing else can be done until you do.
Purchase an external HD and move your Photos and Music to it. Both iPhoto and iTunes can run perfectly well with the Library on an external disk.
Your Library has been damaged from being run on an overfull disk.
How much free space on it now?

Satellite A40- Warning: problem with the cooling system has been detected

Hello guys,
I'm getting the following message from time to time:
Warning: a problem with the cooling system has been detected Toshiba
Please turn off the computer immediately, and return it for servise.
I have Windows XP on it.
I opened the cooling fan and clean it. Off course, I found it rally dirty.
But, still I'm getting this message!!!
What I shall to do ??
I'm living in north Germany.
Any advise is most welcome and thanks in advance.
Ibraheem

Hi
The message says everything!!!
In such case you have to contact the authorized service provider in you country!
>I opened the cooling fan and clean it. Off course, I found it rally dirty.
Possibly the cooling modules dont as should and therefore the message appears again!
Nothing to do buddy... you need an help from notebook technician

Satellite P500-12D - A problem with the cooling system has been detected

hi there everyone,
I have bought a Satellite P500-12D which was a retail return. When I start it up it runs a couple of mins and then this comes up on the screen:
Warning: A problem with the cooling system has been detected. please turn off the computer immediately and return it for service.
In the toshiba health monitor the cpu is under 50% temp and if it goes much above that the cooling fan comes on and lowers it back down and the fan stops again, I have noticed that only the r/h fan runs to cool the cpu, should both them come on together? Could it be a software problem?
Tthe unit is new without even the plastic off the screen surround or webcam. Any help or even point me in the right direction would be very appreciated, gary

The fact that the pc is a retail return would indicate that there was a fault at day one and the customer returned it. At some point the retailer turned it on and since it appeared to work re-sold it.
This is the cooling/fan report from a P500 produced by pc wizard 2010 - free from cpuid.com. Perhaps a comparison against the faulty laptop will point to the problem
<<< Voltage, Temperature and Fans >>>
> Hardware Monitoring : National LM79
> Voltage CPU : 1.02 V
> +3.3V Voltage : 1.02 V
> +5V Voltage : 0.43 V
> +12V Voltage : 1.02 V
> Chassis Fan : 42187 rpm
> Power/Aux Fan : 21093 rpm
> Processor Temperature : 64 C
> Mainboard Temperature : 16 C
> Hardware Monitoring : ACPI
> Thermal Zone : 48 C
> Processor :
> Intel Mobile Core 2 Duo (Core 1) : 57 C
> Intel Mobile Core 2 Duo (Core 2) : 58 C
> NVIDIA GeForce GT 230M : nVidia Driver
> GPU Temperature : 35 C
> GPU Diode : 35 C
> GPU Fan : 100.0%
> Hard Disk Monitoring : S.M.A.R.T
> Hard Disk TOSHIBA MK5055GSX (Assembly) : 38 C
> Hard Disk TOSHIBA MK5055GSX (Assembly) : 27 C

I upgraded the OS on my iMac to Lion from the App store; and after installation, it restarted and now the operating system won't start up.... it keeps displaying the apple/folder with a question mark and a circle with a line through it! Please help!

I upgraded the OS on my iMac to Lion from the App store; and after installation, it restarted and now the operating system won't start up.... it keeps displaying the apple/folder with a question mark and a circle with a line through it! Please help!

Try starting up with your Snow Leopard DVD and see if the disk can be repaired. Once you are at the installer screen go to the Utilities Menu and choose Disk Utility and choose repair disk. You might also want to try Diskwarrior.
Hope this helps.
Ben

Has anyone else had problems with the latest system updates to Mac OS X v10.6.8 with the java virus patch?

After installing the latest updates to Snow Leopard the system hangs up and will not open properly. This is the update to Java, etc after the virus was discovered. I have done the updates on four different systems with the same result.

No problems with the Java update here, although I have Java disabled. Might try reapplying the Java standalone while in Safe Boot (Shift at startup chime), if you did it from Software Update.
http://support.apple.com/kb/DL1516

Problems with the File System Repository & User Mapping!

Hi All
I am having a problem with a file system repository, and setting up user mapping for that repository.
I have done the following:
Created a File System Repository
Created a Network Path
Created a System (Including the alias)
Now when I go into User Administration and select my user the is no user mapped systems to select.
All this system is doing is connecering to a folder on our File System.
Any help would be great as this is really frustrating!
Thanks
Phil

I am using EP7 Stack 11 and unfortunately the only options I have are:
user
admin
admin,user
It is currently set to admin, user and does not seem to work!
Phil
Message was edited by:
Phil Wade

URJECT - License (Restart Problem in the development system)......

Similar Messages

Maybe you are looking for