URL Customization Using Experience Rules
We've got a bit of a sticky problem and am wondering if anyone can point me in the right direction.
We've used experience rules to point custom URLs to communities. However, when another user types in a URL to access a community on the portal, the previous URL appears as a link in every navigation link and login on the portal. In other words, the minute the user chooses a link from the dropdown menu or logs in, they are taken to the previous community. Thereafter, the header, footer and colors from the rules of the previous community show up in every community the user goes to.
This is extremely frustrating and confusing to our users. It appears that URLs are being cached in the navigation and/or experience rules configuration is overriding.
Has anyone else had this experience? Is there a way around this problem? Any ideas would be greatly appreciated.
Jo
PS - Please forgive if you see this twice - I think I posted to the wrong forum earlier
Edited by: user10368007 on Sep 26, 2008 9:19 AM
Can you give us a little bit of context on which product you've been working with?
Thanks in advance
Similar Messages
-
We've got a bit of a sticky problem and am wondering if anyone can point me in the right direction.
We've used experience rules to point custom URLs to communities. However, when another user types in a URL to access a community on the portal, the previous URL appears as a link in every navigation link and login on the portal. In other words, the minute the user chooses a link from the dropdown menu or logs in, they are taken to the previous community. Thereafter, the header, footer and colors from the rules of the previous community show up in every community the user goes to.
This is extremely frustrating and confusing to our users. It appears that URLs are being cached in the navigation and/or experience rules configuration is overriding.
Has anyone else had this experience? Is there a way around this problem?
JoCan you give us a little bit of context on which product you've been working with?
Thanks in advance -
Experience rule question (a possible limitation?)
Hi,
I am using experience rule/subportal to show users customized layout for our communities. I expect the users will see the customized layout right after they log into the portal. I achieved the customized layout/menus using adaptive tags in a custom header portlet.
The problem is many communities in our oganization has custom community header which will overwrite my subportal's header. So in my experience rule, I need to specify my experience definition only applies to certain users when they access certain communities(e.g. communities in this subportal).
However I found out that users will automaticly go to the My Page in the default experience definition and my customized exeperience definition only take effect when I go to my community. If I don't add the community constraints in my experience rule, the user will directly go to the correct definition. However this is not an option since many other communities' headers will overwrite my menu system and make the portal not navigatable.
I wish the community constraint also include "My Page" so my experience definition will always work.
Have you encountered the same problem? Any suggestions?
thanks!
-JimmyYou can create an experience rule against a particular portal URL by going into the Admin section: Select Utility: Experience Rules Manager.
Name the rule, add an experience definition, and then add your URL.
I haven't tried it but I assume this would solve your issue?
Let us know if it works, thanks! -
Getting an Experience Rule to work
I am building a demo site and have set up an new experience def - it has a custom header, footer, css.
This is on my development box and of course there is a default exp. def that is different.
The regular URL would be disco-dev.ads.net
and the demo site (same ip addresss) would be
disco-demo.ads.net
I then set up a custom experience rule in the experience manager that has only the URL rule set up it is
http://disco-demo.ads.net/portal/server.pt?
I am logging in as the admin (who is in the default exp def folder) and I do not get taken to the Demo experience.
When I look at the debug messages I have this:
Display Page Phase Begin
Evaluating expressions for action type: Experience Definition
Evaluating simple expression: Tango Demo -
Condition on Base URL returning false because the URL Domain: disco-demo.ads.net/portal/server.pt? does not match the one found in the user's environment: disco-demo.ads.net/portal/server.pt
Expression: Tango Demo returning false
Finished evaluating expressions for action type: Experience Definition. Resulting action value: No Action Value Found
Display Page Phase Ends
What does this mean???
Edited by laurie.kern at 03/04/2008 12:17 PMWhen you create a new rule, the portal URL section states: 'between the 'http(s)://' and '?' in 'server.pt?'. So don't include /portal/server.pt on the end or http(s):// at the beginning.<br>
Change your portal url to this: disco-demo.ads.net
<br>
We use wildcards a lot in our rules and they work just fine.
Many of ours also use this: mydomainname.com/ -
WCF Url Rewriting using global.asax
Hello,
I am doing Url Rewriting using global.asax but getting below error message.
Description: HTTP
404. The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable. Please review the following URL and make sure that it is spelled correctly.
Requested URL: /Services/MyService.svc/rest/CheckInternet
I tested service. its working fine without url rewriting.
please help me to solve this issue.
Please "Mark as Answer" if this post answered your question. :)
Kalpesh Chhatrala | Software Developer | Rajkot | India
Kalpesh 's Blog
VFP Form to C#, Vb.Net Conversion UtilityHi Kalpesh Chhatrala,
I wonder if you are using the WCF Soap Service or the WCF Rest Service.
Since your WCF Service works very well without the URI Rewriting, then it seems that you have do something wrong during the process of the URI Rewriting, so please try to refer to the following articles about how to do the URI Rewriting
for the WCF Service:
http://blogashwani.blogspot.com/2013/02/url-rewriting-for-wcf-service.html .
http://blogs.msmvps.com/abu/2008/12/22/url-rewriting/ .
http://blogs.msdn.com/b/endpoint/archive/2008/08/22/rest-in-wcf-part-ix-controlling-the-uri.aspx .
Best Regards,
Amy Peng
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
We are trying to use URL rewriting using JSTL. We have some problems facing URL
rewriting. The issues we have are
(1) We use absolute URLs
(2)Some times we have situations based on certain input field validations
we use
javascript to perform URL rewriting based on the input by the user.
Have anyone done URL rewriting using JSTL (absolute URL versus relative URLS)
Regds
Guna
Hi
Kalpesh Chhatrala,
If this issue still not resolved, please consider to post in WCF forum.
Here is the link
https://social.msdn.microsoft.com/Forums/en-US/home?forum=wcf
Now i will move your thread to Off-topic forum. If you have any other issues about C#, please feel free to post in this forum. Thanks for your understanding.
Thanks
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Help needed in using oracle rules SDK
Hi,
For testing my rulesets using oracle rules SDK I doing the following:
1. Creation of dictionary, ruleSet.
2. Declared two kinds of globalVariable variables in my datamodel :
Final and non-Final.(Type of these varaibles are String and Double only)
3. Final globalVaraibles are used in creating rule's patterns.
4. Non-Final globalVariables are used in creating rule's action.
5. Functions are created for asserting globalVariables values and
returning non-final varaibles, since those are required as action
results.
6. In java code I am testing my ruleset (dict.testRuleSet()). Before
testing i am populating my final global variables (since these are used
in rule's patterns),
and updating datamodel.
The above procedure is working fine and I rules are successfully working.
Now, first of all i want to know if the above mentioned approach is correct or it needs to be reframed??
secondly, when i update datamodel with values (in java code itself) it
takes 4-5 seconds in updating it. This is the main issue that why it is
taking this much time??
any comment would be of great help.
Thanks in advance.I will send up an alert for you, Colin. Even though I use iTunes for Mac, troubleshooting it isn't my forté.
-
Which URL to use to open a financial report from a Task list ?
Hi,
I've got a big issue in Hyperion Planning : I do not know which URL to use to open a financial report from a task list.
If I use the Smartcut (given when you do a right-click on the report, then Properties), a tab is opening (normal behaviour), but another tab is opening under the tab, which is very ugly, and moreover which prevent from using the PDF/HTML display icons !
Is someone know which URL to use to display correctly a financial report when opening it from a task list ?
It's an emergency, please help !
Thanks very much.
Virgile.
PS. : we use Internet Explorer 8 and we use 11.1.2.1 Hyperion Planning version
Edited by: 808808 on Jan 5, 2012 3:41 AMHi,
OK, thanks, it almost works !!
I've just a problem. 2 tabs are opening.
One is opening correctly and displays my report. I can display it in PDF/HTML.
But another tab is opening with this message : This window can now be closed since the application has been launched in a separate window. Note: Popup blockers may prevent this application from working properly.
Do you know why this tab is opening ?
Thanks very much for your help.
Virgile. -
How to tune data loading time in BSO using 14 rules files ?
Hello there,
I'm using Hyperion-Essbase-Admin-Services v11.1.1.2 and the BSO Option.
In a nightly process using MAXL i load new data into one Essbase-cube.
In this nightly update process 14 account-members are updated by running 14 rules files one after another.
These rules files connect 14 times by sql-connection to the same oracle database and the same table.
I use this procedure because i cannot load 2 or more data fields using one rules file.
It takes a long time to load up 14 accounts one after other.
Now my Question: How can I minimise this data loading time ?
This is what I found on Oracle Homepage:
What's New
Oracle Essbase V.11.1.1 Release Highlights
Parallel SQL Data Loads- Supports up to 8 rules files via temporary load buffers.
In an Older Thread John said:
As it is version 11 why not use parallel sql loading, you can specify up to 8 load rules to load data in parallel.
Example:
import database AsoSamp.Sample data
connect as TBC identified by 'password'
using multiple rules_file 'rule1','rule2'
to load_buffer_block starting with buffer_id 100
on error write to "error.txt";
But this is for ASO Option only.
Can I use it in my MAXL also for BSO ?? Is there a sample ?
What else is possible to tune up nightly update time ??
Thanks in advance for every tip,
ZeljkoThanks a lot for your support. I’m just a little confused.
I will use an example to illustrate my problem a bit more clearly.
This is the basic table, in my case a view, which is queried by all 14 rules files:
column1 --- column2 --- column3 --- column4 --- ... ---column n
dim 1 --- dim 2 --- dim 3 --- data1 --- data2 --- data3 --- ... --- data 14
Region -- ID --- Product --- sales --- cogs ---- discounts --- ... --- amount
West --- D1 --- Coffee --- 11001 --- 1,322 --- 10789 --- ... --- 548
West --- D2 --- Tea10 --- 12011 --- 1,325 --- 10548 --- ... --- 589
West --- S1 --- Tea10 --- 14115 --- 1,699 --- 10145 --- ... --- 852
West --- C3 --- Tea10 --- 21053 --- 1,588 --- 10998 --- ... --- 981
East ---- S2 --- Coffee --- 15563 --- 1,458 --- 10991 --- ... --- 876
East ---- D1 --- Tea10 --- 15894 --- 1,664 --- 11615 --- ... --- 156
East ---- D3 --- Coffee --- 19689 --- 1,989 --- 15615 --- ... --- 986
East ---- C1 --- Coffee --- 18897 --- 1,988 --- 11898 --- ... --- 256
East ---- C3 --- Tea10 --- 11699 --- 1,328 --- 12156 --- ... --- 9896
Following 3 out of 14 (load-) rules files to load the data columns into the cube:
Rules File1:
dim 1 --- dim 2 --- dim 3 --- sales --- ignore --- ignore --- ... --- ignore
Rules File2:
dim 1 --- dim 2 --- dim 3 --- ignore --- cogs --- ignore --- ... --- ignore
Rules File14:
dim 1 --- dim 2 --- dim 3 --- ignore --- ignore --- ignore --- ... --- amount
Is the upper table design what GlennS mentioned as a "Data" column concept which only allows a single numeric data value ?
In this case I cant tag two or more columns as “Data fields”. I just can tag one column as “Data field”. Other data fields I have to tag as “ignore fields during data load”. Otherwise, when I validate the rules file, an Error occurs “only one field can contain the Data Field attribute”.
Or may I skip this error massage and just try to tag all 14 fields as “Data fields” and “load data” ?
Please advise.
Am I right that the other way is to reconstruct the table/view (and the rules files) like follows to load all of the data in one pass:
dim 0 --- dim 1 --- dim 2 --- dim 3 --- data
Account --- Region -- ID --- Product --- data
sales --- West --- D1 --- Coffee --- 11001
sales --- West --- D2 --- Tea10 --- 12011
sales --- West --- S1 --- Tea10 --- 14115
sales --- West --- C3 --- Tea10 --- 21053
sales --- East ---- S2 --- Coffee --- 15563
sales --- East ---- D1 --- Tea10 --- 15894
sales --- East ---- D3 --- Coffee --- 19689
sales --- East ---- C1 --- Coffee --- 18897
sales --- East ---- C3 --- Tea10 --- 11699
cogs --- West --- D1 --- Coffee --- 1,322
cogs --- West --- D2 --- Tea10 --- 1,325
cogs --- West --- S1 --- Tea10 --- 1,699
cogs --- West --- C3 --- Tea10 --- 1,588
cogs --- East ---- S2 --- Coffee --- 1,458
cogs --- East ---- D1 --- Tea10 --- 1,664
cogs --- East ---- D3 --- Coffee --- 1,989
cogs --- East ---- C1 --- Coffee --- 1,988
cogs --- East ---- C3 --- Tea10 --- 1,328
discounts --- West --- D1 --- Coffee --- 10789
discounts --- West --- D2 --- Tea10 --- 10548
discounts --- West --- S1 --- Tea10 --- 10145
discounts --- West --- C3 --- Tea10 --- 10998
discounts --- East ---- S2 --- Coffee --- 10991
discounts --- East ---- D1 --- Tea10 --- 11615
discounts --- East ---- D3 --- Coffee --- 15615
discounts --- East ---- C1 --- Coffee --- 11898
discounts --- East ---- C3 --- Tea10 --- 12156
amount --- West --- D1 --- Coffee --- 548
amount --- West --- D2 --- Tea10 --- 589
amount --- West --- S1 --- Tea10 --- 852
amount --- West --- C3 --- Tea10 --- 981
amount --- East ---- S2 --- Coffee --- 876
amount --- East ---- D1 --- Tea10 --- 156
amount --- East ---- D3 --- Coffee --- 986
amount --- East ---- C1 --- Coffee --- 256
amount --- East ---- C3 --- Tea10 --- 9896
And the third way is to adjust the essbase.cfg parameters DLTHREADSPREPARE and DLTHREADSWRITE (and DLSINGLETHREADPERSTAGE)
I just want to be sure that I understand your suggestions.
Many thanks for awesome help,
Zeljko -
How can I remove a flag using a rule in Mail.app?
I'm using Mail Act-On to flag messages that are important. I also have got a smart mailbox that displays only those messages that are flagged, this is my "To Do" mailbox.
Once I've read and answered the message I want to remove the flag, preferrably via a rule using Mail Act-On as well. However in the rules dialog in the Mail.app preferences there's only the option to set a flag, not to remove one.
Can anyone help: how can I remove a flag using a rule?? Maybe via Applescript as the last resort?
Thanks for any advice JanHi Jan
I haven't gotten around to put unread and unflag into Mail-ActOn but MailTags has the functionality. MailTags also allows you to mark a message unread via act-On rule.
It is interesting to note that apple doesn't include unflag and unread as the rules were originally intended to apply only to new messages (of which none should be read or flagged) with that logic, there would be no need for unread, unflagg.
@David: The reason to do it via Act-On rule would be to set up a sequence of events, one of which is to unflag, others may be to set keywords, move messages, set colors etc.
Scott -
is there a way to address email (i.e. a word or some code) that would place that email in a specified inbox folder? not using internal rule, rather the beginning of this sort happening as it comes in?
In other words
I tell a friend if he is emailing me on a particular subject, is there something he can do at his end ([email protected]/research)
like adding the word research at the end of my eamil address that would tell my inbox to place that in the inbox/research folder?
If I have to use a rule on my end, then do I tell him to just place the word research in the subjct line and then I write a rule to place anything with the word research in the subject line in my inbox/research folder?
will the subject line be required to only have the one word research to work, or will the rule look for any presense of that word in the subject line?
thanks
ericiCloud email supports 'plus' addressing. http://en.wikipedia.org/wiki/Email_address#Address_tags
So your friend could just add '+research' to the username part of your email address, and you setup a rule at icloud.com to put all emails sent to that address into a particular folder.
For example:
[email protected]
There's no way to do it without rules on the server though. -
Performance Issue in using Oracle Rules SDK!!!!
Hi,
I am using Oracle rules SDK. I have created a dictionary and declared 9 global variables in it. Now, before testing my ruleset in my code, I populate those variables and update datamodel.
Date startDate = new Date();
try
this.dataModel.update();
*}catch (Exception e) {*
e.printStackTrace();
Date endDate = new Date();
long duration = endDate.getTime() - startDate.getTime();
System.out.println("Time Taken : "+duration);
Now the issue is that time taken by dataModel.update() is freaking 4210 milliseconds, i.e 4.2 seconds. Any idea why this is slow??
oracle.rules.sdk.editor.datamodel.DataModel = new DataModel(ruleDictionary);When your query takes too long ...
Thanks,
Karthick. -
Dynamic URL Configuration using variable range - WAD
Hi,
I am trying to configure a URL dynamically using variable range values. There are two variables which I pass to the URL, Sales Document Number and Posting Date. Sales Document Number has a single value and Posting Date is a range variable. The single value for sales document is passed to the URL but the date range is not passed and hence the web template gets the blank value for the date and shows the variable screen as this is mandatory. The URL is as follows.
CONCATENATE
l_web_protocol
l_portal_server
Initial URL
'/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?TEMPLATE='
l_web_template
'&BI_COMMAND_1-BI_COMMAND_TYPE=SET_VARIABLES_STATE'
'&BI_COMMAND_1-VARIABLE_VALUES-VARIABLE_VALUE_1-VARIABLE_TYPE=VARIABLE_INPUT_STRING'
'&BI_COMMAND_1-VARIABLE_VALUES-VARIABLE_VALUE_1-VARIABLE_TYPE-VARIABLE_INPUT_STRING='
l_var_value "variable value
'&BI_COMMAND_1-VARIABLE_VALUES-VARIABLE_VALUE_1-VARIABLE='
l_var_name "Variable for info object
'&BI_COMMAND_2-BI_COMMAND_TYPE=SET_SELECTION_STATE_SIMPLE'
'&BI_COMMAND_2-RANGE_SELECTION_OPERATOR=INTERVAL_SELECTION'
'&BI_COMMAND_2-RANGE_SELECTION_OPERATOR-INTERVAL_SELECTION-INTERVAL_SELECTION_LOW_MEMBER-ATTRIBUTE_MEMBER_SELECTION-
INFO_OBJECT=0PSTNG_DATE'
'&BI_COMMAND_2-RANGE_SELECTION_OPERATOR-INTERVAL_SELECTION-INTERVAL_SELECTION_LOW_MEMBER=MEMBERS_EXIT'
'&BI_COMMAND_2-RANGE_SELECTION_OPERATOR-INTERVAL_SELECTION-INTERVAL_SELECTION_LOW_MEMBER-MEMBERS_EXIT='
l_range_var_name "Customer Exit Variable
'&BI_COMMAND_2-RANGE_SELECTION_OPERATOR-INTERVAL_SELECTION-INTERVAL_SELECTION_LOW_MEMBER-MEMBER_NAME='
l_range-low "Variable Value - Low
'&BI_COMMAND_2-RANGE_SELECTION_OPERATOR-INTERVAL_SELECTION-INTERVAL_SELECTION_HIGH_MEMBER-ATTRIBUTE_MEMBER_SELECTION- INFO_OBJECT=0PSTNG_DATE'
'&BI_COMMAND_2-RANGE_SELECTION_OPERATOR-INTERVAL_SELECTION-INTERVAL_SELECTION_HIGH_MEMBER=MEMBERS_EXIT'
'&BI_COMMAND_2-RANGE_SELECTION_OPERATOR-INTERVAL_SELECTION-INTERVAL_SELECTION_HIGH_MEMBER-MEMBERS_EXIT='
l_range_var_name "Customer Exit Variable
'&BI_COMMAND_2-RANGE_SELECTION_OPERATOR-INTERVAL_SELECTION-INTERVAL_SELECTION_HIGH_MEMBER-MEMBER_NAME='
l_range-high "Variable Value - High
'&BI_COMMAND_2-RANGE_SELECTION_SIGN=INCLUDING'
'&BI_COMMAND_2-TARGET_DATA_PROVIDER_REF_LIST=DP_TAB' "Tab in the Web Template
into l_url.
Can someone tell me asto what's going wrong with this URL? I passed single value for Posting Date and it worked fine.
Thanks and Regards,
AryaThanks for the reply. However I did not understand couple of things. Should I try the URL like below?
BI_COMMAND=&
BI_COMMAND-TARGET_DIALOG_REF=l_var_name&
BI_COMMAND-BI_ADVANCED=DLG_VARIABLE_vsc_DropdownVariants& "Which value to be passed?
BI_COMMAND-BI_COMMAND_TYPE=PASSIVE_VALUE_TRANSFER& "Which value to be passed?
BI_COMMAND-PASSIVE_ID=DLG_VARIABLE_vsc_DropdownVariants_combobox& "Which value to be passed?
BI_COMMAND-PASSIVE_VALUE=l_var_value&
BI_COMMAND_1=&
BI_COMMAND_1-TARGET_DIALOG_REF=l_range_var_name&
BI_COMMAND_1-BI_ADVANCED=DLG_VARIABLE_vsc_CommonVariablesList_VAR_1_VARINPUT& "Which value to be passed?
BI_COMMAND_1-BI_COMMAND_TYPE=PASSIVE_VALUE_TRANSFER&
BI_COMMAND_1-PASSIVE_ID=DLG_VARIABLE_vsc_CommonVariablesList_VAR_1_VARINPUT_inp& "Which value to be passed?
BI_COMMAND_1-PASSIVE_VALUE=l_range_low-l_range_high&
BI_COMMAND_2=&
BI_COMMAND_2-TARGET_DIALOG_REF=l_range_var_name&
BI_COMMAND_2-BI_COMMAND_TYPE=OK
Thanks and Regars,
Arya -
How to use the rule in workflow
Hi ,Guy ,
I am implementing the workflow project nowaday ,and when I use the rule to determine the step's agent , I often come across all kinds of strange problem and I do not know how to slove it goodly ,for example I do not know how to get the agent from orgainization unit etc .
can anybody give me some advices or some relevant docments(I have read the SAP standard material BIT601/BIT603/BIT610) .thank a lot .
Jialiang.QiuYes , you can define your own rule. You need to populate the table of type SWHACTOR with whatever agents you want to maintain . See the below code :
function z_cvwf_dwnam_approver_get.
""Local Interface:
*" IMPORTING
*" VALUE(ACT_PLVAR) LIKE P1208-PLVAR DEFAULT SPACE
*" VALUE(ACT_ISTAT) LIKE P1208-ISTAT DEFAULT '1'
*" VALUE(ACT_BEGDA) LIKE P1208-BEGDA DEFAULT SY-DATUM
*" VALUE(ACT_ENDDA) LIKE P1208-ENDDA DEFAULT SY-DATUM
*" TABLES
*" AC_CONTAINER STRUCTURE SWCONT
*" ACTOR_TAB STRUCTURE SWHACTOR
*" EXCEPTIONS
*" NO_ACTIVE_PLVAR
*" OBJTYP_NOT_VALID
*" NO_ACTOR_FOUND
data: l_user like draw-dwnam, "User
l_dokar like draw-dokar, "Document type
l_doknr like draw-doknr, "Document number
l_dokvr like draw-dokvr, "Document version
l_doktl like draw-doktl. "Document part
data: xausp like ausp.
*Data for AUSPC_V1 selection
data: xatinn(12) value 'APPROVER',
xklart like ausp-klart value '017',
xobjek like ausp-objek.
include <cntain>.
swc_get_element ac_container 'DOCUMENT' l_doknr.
swc_get_element ac_container 'DOCUMENTPART' l_doktl.
swc_get_element ac_container 'DOCUMENTTYPE' l_dokar.
swc_get_element ac_container 'DOCUMENTVERSION' l_dokvr.
Create objek from DRAW key fields
write: l_dokar to xobjek,
l_doknr to xobjek+3(25),
l_dokvr to xobjek+28(2),
l_doktl to xobjek+30(3).
Get Approver number
call function 'CONVERSION_EXIT_ATINN_INPUT'
exporting
input = xatinn
importing
output = xatinn.
From table AUSP
clear sy-subrc.
select single * from ausp
into xausp
where objek = xobjek
and atinn = xatinn
and klart = xklart.
Assign ATWRT to USER RESPONSIBLE FOR APPROVAL
if sy-subrc > 0.
raise no_actor_found.
endif.
actor_tab-otype = 'US'.
actor_tab-objid = xausp-atwrt.
append actor_tab.
endfunction. -
Building arguments of URL when using HTTP Adapter
I am using the HTTP adapter in one of my interfaces and need to call an url that has arguments. For e.g.
http://dpw6716.roseville.mycompany.com:8058/accelis/servlet/publish?type=create&ItemId=1018&Name=Harshad&Desc=FromXI
In the above URL the <b>ItemID</b> and the <b>Description</b> are dynamic. Is it possible to build such dynamic urls and used in the http adapter configuration? if so how? Can context objects be used here for the dynamic part?
Thanks,
HarshadHi Harshad,
it is possible to build up dynamic URLs, but the way is quite complex. You have to configure a XI-mandant as "Application System" to use it as allocator. Your message will be received there in an inbound-proxy (ABAP), where you have to implement a dynamic WAS-Request (class CL_HTTP_CLIENT).
Regards Udo
Maybe you are looking for
-
Idoc execution in Scheduling Agreement with Delivery Schedule
Hi all, Can anybody please explain the importance of the field name "LABKY" in Idoc execution for Forecaste/JIT Delivery Schedule. My requirement is that when i send a new Idoc i do not want the old schedule line which are not yet released , to be de
-
Does the light on the power cord always mean connected?
I have a PowerBook with a very finicky power supply and an almost totally dead battery. When the battery is in and the power supply is connected (green light), the machine turns off after about a second and a half after flashing a low battery message
-
I am connected to the internet but my facetime will not activate
So I tried to log into my apple id to turn on my facetime but a pop up will say that I need to check my network connection and try again but Im fully connected to the internet. What do i do? Please help me.
-
Hi, I have done coding where I have to convert a Remittance advice into PDF and mail it to Vendors. The only problem is that I am not able to retrieve the spool id using Structure : itcpp-tdspoolid and hlp_pdfspoolid... One more thing is I am usi
-
When copying a drawing element or text item, SO8 initiates some communication over the network (StarOffice 8 running on Windows XP). This slows down normal copy/paste capability and reduces productivity. Why is this happening - and how does one contr