URL from PushNotificationChannelManager cannot be found

I'm building a Windows Phone 8.1 app that communicates with a Windows Service with SignalR. The URL I recieve from:
PushNotificationChannelManager.CreatePushNotificationChannelForApplicationAsync()
Looks like: "http://notificationserver.microsoft.com/XXXXXXXXXX...
Here is my first problem. When I read about this on several webpages, it states that the URL-domain should contain with "notify.windows.com" or am I wrong?
When I try to post a push-notification to WNS with the URL I receive:
The remote name could not be resolved: 'notificationserver.microsoft.com'
Could the problem be something with my authentication when trying to send the notification or do I receive the wrong URL in the first place?
UPDATE:
After rebooting the computer I got the correct URL and it seems to work...
The one thing I can think about is that during that the emulator was running I noticed that the "Notificatiojn Service" in WMAppManifest.xml was set to "MPN" and I changed that to "WNS" without restarting the emulator (but I did
uninstall the app and re-run it)...

After rebooting the computer I got the correct URL and it seems to work...
The one thing I can think about is that during that the emulator was running I noticed that the "Notificatiojn Service" in WMAppManifest.xml was set to "MPN" and I changed that to "WNS" without restarting the emulator (but I did uninstall the app and re-run
it)...

Similar Messages

My Application logs "The description of Event ID 0 from MyApp cannot be found" event to application event log

Hello,
This is regarding the following event logged by my application (MyApp.exe) to the application event log:
Log Name:      Application
Source:        MyApp
Date:          03/2/2015 12:00:09 PM
Event ID:      0
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      Rajesh
Description:
The description for Event ID 0 from source MyApp cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
I have confirmed that the key "EventMessageFile" in HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\eventlog\Application\MyApp correctly specifies the "dll" responsible for displaying events.
I would appreciate suggestions on the above.
Best Regards,
Rajesh K Singh

Hi All,
can you provide solution on below error.
The description for Event ID 17052 from source MSSQLSERVER cannot be found
Severity: 16 Error:0, OS: 0 [Microsoft][SQL Server Native Client 10.0]Unable to complete login process due to delay in opening server connection
Thanks in advance.
Vijay
Check below thread, information is not complete to actually comment what were you doing when you got this message.refer errorlog for more details
http://social.msdn.microsoft.com/Forums/en-US/9a41ced9-19ad-4c4f-83ac-7e877b699a8f/login-failure-error-in-event-log-daily
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

Event ID 27 from sourese1 cannot be found

In server 2012 r2 In event viewer we are getting this warning error

Hi,
Based on my research, the event ID 27 would be due to the network adapter.
Please make sure that you have already installed the latest NIC drivers and BIOS update.In addition, please also check your network cable as when it is unplugged, it may issue the Event ID 27.
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

"URL cannot be found" prompt from iTunes with my podcast

I published the second episode of a new podcast of mine and iTunes is telling me that the URL cannot be found. When I go to the url, it cannot be found, but the feed is valid. Any suggestions?
http://terranovacast.com/feed/podcast
I did take out the "feed" and went to http://terranovacast.com/podcast and that worked fine.
The first episode uploaded to iTunes just fine and can still be accessed from within iTunes.
Any help is greatly appreciated.

iTunes is looking for a feed at http://terranovacast.com/feed/podcast . There is no file at this address. The other link you give leads to a directory index which is no use to iTunes.
Until you restore a feed at http://terranovacast.com/feed/podcast your podcast cannot be subscribed to and will not update in the Store when you add further episodes.
Your web page at http://terranovacast.com/ has a 'subscribe to iTunes' link but this simply leads to the same page. It would be best to link to the iTunes URL:
http://itunes.apple.com/gb/podcast/terra-novacast/id465808122

When i try to watch synced video on my itouch i get "the requested url cannot be found on this server". I am able to watch the video on my pc in itunes. however, i cannot watch it on my itouch.

When i try to watch synced video on my itouch i get "the requested url cannot be found on this server". I am able to watch the video on my pc in itunes. However, i cannot watch it on my itouch. It shows in the video window that the video is there but when i select it to watch it i get the message and then it goes back to the video menu. It's like it's not really syncing - even though it shows on my itouch. It doesn't seem to be specific to videos downloaded to the itouch directly or itunes directly. It's happening to both.

This is happening to me too. I recently purchased about 4 music videos from iTunes, 3 of them play on both my pc and my iPod Touch but there's one particular music video that will only play on my pc and gives me the same "The requested url cannot be found on this server" message when I try to play it on my iPod. Can someone please rectify?

POST MIGRATION - Project Site cannot be found after migration from 2007 to 2010

Hi,
I have done full migration from Project Server 2007 to Project server 2010. All the databases have been restored. The details in the Project Center are coming correctly. But When I open the Project Site , I get error webpage cannot be
found.
I have done the Bulk update but it is not updating the URL to 2010 URL.
Please help.
Regards

Use PowerShell to list all the sites in your PWA site collection.
There are many examples online.. Here is a link that is useful
http://blogs.msdn.com/b/vijay/archive/2009/10/01/how-to-list-all-the-sub-sites-and-the-site-collections-within-a-sharepoint-web-application-using-windows-powershell.aspx
Cheers
Michael Wharton, MVP, MBA, PMP, MCT, MCTS, MCSD, MCSE+I, MCDBA
Website http://www.WhartonComputer.com
Blog http://MyProjectExpert.com contains my field notes and SQL queries

Midlet cannot be found at this url-1

Hi All,
I'm doing some work on my server by hosting some mobile java games. But when I try to download them to my phone I always get error as "Midlet cannot be found at this URL-1" could anyone please give me some advice on how to fix it?
Thanks a lot and look forward to hearing from you
Michele

Maybe someone over at one of the ME forums [1] can help you out.
When you start a new thread there, please make sure to come back here and link to that from this one so that people don't continue answering here.
[1] http://forum.java.sun.com/category.jspa?categoryID=23
People on the forum help others voluntarily, it's not their job.
Help them help you.
Learn how to ask questions first: http://www.catb.org/~esr/faqs/smart-questions.html
----------------------------------------------------------------

HT3281 Podcasts from Current Tv, since three weeks prior to the Nov 2012 election have had a url problem and cannot be played on my mac mini 2011 with 10.8.2 and the latest Itunes? anyone know why ? I am in contact with Itunes now and they wanted screensh

Podcasts from Current Tv, since three weeks prior to the Nov 2012 election have had a url problem and cannot be played on my mac mini 2011 with 10.8.2 and the latest Itunes? anyone know why> ? I am in contact with Itunes now and they wanted screenshots of the problem, I can get these current tv episodes with a vpn and my isp says they are not blocking them, but i was surprised that prior to the election they were blocked, ?
I also can get them on my Android Samsung Galaxy note 2 with no problem but on the Macmini cannot>/? I Unsubscribed and subscribed many times but still no luck, any ideas? I am waiting for the senior advisor to get back to me on this issue. I am in THailand now where the problem is happening and as I said the ISP says they do not block any podcasts.I also do not want it on my iphone 5, so I have to wait and see why the mac mini is not getting it.

I seem to have fixed it by putting <div class="clearfloat"></div> after the navigation bar?

I am trying to update ITunes from 10.4 to 10.5 I have tried from both the program, and from a download on Apple's website. Regardless, I get the following error messages: (1) Installation package for iTunes cannot be found. Try installing to find the inst

I am trying to update ITunes from 10.4 to 10.5 I have tried from both the program, and from a download on Apple's website. Regardless, I get the following error messages: (1) Installation package for iTunes cannot be found. Try installing to find the installation package 'iTunes.msi' in a folder from which you can install iTunes. I can't find this folder. I have tried to completely unistall iTunes through the Control Panel, but it wouldn't let me: I tried going directly to the files themselves, but cannot uninstall. Any help would be greatly appreciated. System OS: Win XP SP 3.

Set the permissions for Everyone in the folder in which CCPackager created, to "Read/Write" enabled. This is strange since there is only an administrator account on the Mac (and that account already has read/write), but it seems to resolve the issue.

Moved iTunes library to an ext hard drive to make space on my int drive... Followed steps from apple. Now I cannot access my music... It says: "File could not be used because the original file cannot be found. Would you like to locate it?"

Moved iTunes library to an ext hard drive to make space on my int drive... Followed steps from apple. Now I cannot access my music... It says: "File could not be used because the original file cannot be found. Would you like to locate it?"
I moved my iTunes library to my external hard drive some time ago and I followed the directions listed here on the apple support page. It did copy my library and now is on my hard drive... I can open iTunes and use it to sync all of my devices but I would like to play my music... I can see all of my music files but can not play them if I click on an album or song it says the following: "(file name) could not be used because the original file cannot be found. Would you like to locate it?" I click locate but do not know where to go from there? I need a way to access all files and not to hunt down one at a time on my hard drive... I am pretty sure I deleted the original library to make space on my internal drive which was the reason for moving it. I have tried and tried to fix it and do not have a lot of time to do so with a one and two year old at my house who do not like it whenI sit down at my computer. What to do??? Any help is much appreciated!!!

See Make a split library portable. Move all of the bits of the library together in the the correct shape and it should work. Or undo exactly what you did and then start over.
If you're a former Windows user don't try merging two folders together that have the same name by dropping one into the same folders as the other, as that goes badly on a Mac.
tt2

Purchased books from iTune store and downloaded it. Now, when I try to send it to my iPod nano, I get an error message saying the title cannot be found. I cannot find a screen that offers an option to re-download. What gives?

I purchased a box set of books on iTunes, and downloaded them. The title shows up in the "purchased" section, but when I try to send it to my iPod nano, I get an error message telling me it cannot be moved because it cannot be found. I can't find a screen anywhere offering the option to re-download either. I've paid for the books, but cannot access them! Every time I upgrade iTunes, it gets more confusing and harder to use.

Also I now can`t access any of my itunes library and am concerned that if I remove it from my computer I will lose everything as I have no option of accessing and therefore backing anything up. Any ideas?

I just bought the MacBook Air and tried to transfer my songs from my external hard drive to my mac. now i cannot open iTunes and it said that the file cannot be found or created.

i just bought a macbook air. ive been transfering all my songs from my external harddrive that i had on my previous laptop for itunes. now that i got them transfered. my itunes wont open. it says "the itunes library file cannot be found or created. the default location for this file is in the itunes folder in the music folder." what do i do!?!

How did you move the music? You have to do it in a specific way:
iTunes: How to move your music to a new computer [or another drive] - http://support.apple.com/kb/HT4527
do not confuse moving your whole folder and library with moving just media files as in
iTunes for Mac: Moving your iTunes Media folder - http://support.apple.com/kb/HT1449
Quick answer if you let iTunes manage your music: Copy the whole iTunes folder and all its subfolders and files intact to the other drive. Start iTunes with the option key held down and guide it to the new location of the library.

The description for Event ID 0 from source VSTTExecution cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

Hi,
Can any one help me on the below issue ?
while executing automated test case in test center it is showing as test case is in progress, then i navigated to virtual machine (where the test agent is online), there Internet
explore has opened automatically and my test case execution started, but with in a seconds IE has closed . However, in test center, test case status is showing as in
progress, after 2 or 3 min some of test cases getting passed and some are failed.
Here my question is in lab center-->virtual machine, IE has opened automatically and navigated the 2 or 3 links and with in seconds IE has getting closed. Why IE is getting closed without completing execution?
Error Message :
The description for Event ID 0 from source VSTTExecution cannot be found. Either the component that raises this event is not installed on your local computer or the
installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
(mtm.exe, PID 5240, Thread 4) FileAggregatorSessionInfo: Error occurred while deleting temporary directoryException: System.IO.DirectoryNotFoundException: Could not find a part of the path
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.Directory.Delete(String fullPath, String userPath, Boolean recursive, Boolean checkHost)
at Microsoft.VisualStudio.TestTools.Execution.Aggregation.FileAggregator.FileAggregatorSessionInfo.DeleteTemporaryDirectory(String temporaryDirectory)
the message resource is present but the message is not found in the string/message table
Thanks
Suresh
Suresh

Hi,
Can any one help me on the below issue ?
while executing automated test case in test center it is showing as test case is in progress, then i navigated to virtual machine (where the test agent is online), there Internet
explore has opened automatically and my test case execution started, but with in a seconds IE has closed . However, in test center, test case status is showing as in
progress, after 2 or 3 min some of test cases getting passed and some are failed.
Here my question is in lab center-->virtual machine, IE has opened automatically and navigated the 2 or 3 links and with in seconds IE has getting closed. Why IE is getting closed without completing execution?
Error Message :
The description for Event ID 0
from source VSTTExecution cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
(mtm.exe, PID 5240, Thread 4) FileAggregatorSessionInfo: Error occurred while deleting temporary directoryException: System.IO.DirectoryNotFoundException:
Could not find a part of the path
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.Directory.Delete(String fullPath, String userPath, Boolean recursive, Boolean checkHost)
at Microsoft.VisualStudio.TestTools.Execution.Aggregation.FileAggregator.FileAggregatorSessionInfo.DeleteTemporaryDirectory(String
temporaryDirectory)
the message resource is present but the message is not found in the string/message table
We are using VS 2013 (premium) and IE 10.0, scripts have been created on the same versions. It is working fine on
developers command prompt but the same tests are getting failed in lab center test agent machine
test agent log:
QTAgentService.exe, AgentService: calling AgentObject.RunEndFileCopyComplete
QTAgentService.exe, AgentProcessManager.WaitForDataCollectionAgentProcessToStart: waiting for agents to start.
QTAgentService.exe, AgentProcessManager.WaitForDataCollectionAgentProcessToStart: Agents started.
QTAgentService.exe, AgentProcessManager.PerformActionIgnoringExceptions: Successfully called 'Cleanup' on the test agent
QTAgentService.exe, AgentProcessManager.PerformActionIgnoringExceptions: Calling 'StopDataCollection(int)' on the data collection agent
QTAgentService.exe, AgentProcessManager.IsDataCollectionAgentNeeded: IsExecutedOutOfProc? True
QTAgentService.exe, AgentPro
QTAgentService.exe, AgentProcessManager.WaitForDataCollectionAgentProcessToStart: Agents started.
QTAgentService.exe, AgentService: Connection to controller is up.
Thanks
Suresh

SSIS is not running in 64 bit production server - Error Class cannot be found while running from c# web application

Full error message:
An Integration Services class cannot be found. Make sure that Integration Services is correctly installed on the computer that is running the application. Also, make sure that the 64-bit version of Integration Services is installed if you are running a 64-bit
application
I have developed SSIS package in my development machine where the OS is 64 bit and sql server 2012 is installed.
The package has excel source and oledb destination. Excel files can be both .xls and .xlsx format. Since i want to run both xls and xlsx format i have installed
32 bit Microsoft Acess database engine form the below link, then both xls and xlsx format worked.
.xls - 32 bit
.xlsx - 32 bit and 64 bit is available. So in common i have to run it in 32 bit.
I have set Run64BitRuntime to False and ran package. it is working fine. I cannot set Run64BitRuntime to True and run the packages. Because i have office products installed on my machine which is 32 bit. if try to install 64 bit Microsoft Acess
database engine redistributable pacakage from below link , it is throwing error saying that, already office 32 bit product is installed so uninstall 32 bit product and install 64 bit.
Excel connection string is Ace database engine only. everything works fine.
microsoftcom/en-us/download/details.aspx?id=13255
Now i am trying to invoke package from c# code by using Microsoft.SqlServer.ManagedDTS.dll and it is also working fine in my dev machine.
When i deploy the web application in production am getting the error while invoking package. the full error message is posted in 1st line of this thread.
Then i tried to execute the package in production server by using dtexec utility, it is working fine. I tried both 32 bit and 64 bit dtexec utility by going to specific path (program files(x86) and Program files) via command prompt.
It is all working fine. So the error coming when i invoke from web application. My guess is ManagedDTS causing problem.
Where can i find 64 bit Microsoft.SqlServer.ManagedDTS.dll
or is it because of any other problem. i have checked below links, still problem not resolved.
social.msdn.microsoftcom/Forums/sqlserver/en-US/491384d2-02f7-4178-a1c3-bcbd58e57fce/an-integration-services-class-cannot-be-found-make-sure-that-integration-services-is-correctly?forum=sqlintegrationservices
forums.aspnet/t/1990417.aspx?Issue+deploying+SSIS+Package+in+production+web+server

1) "I have set Run64BitRuntime to False and ran package" -> this is not valid outside of your development environment, it is made for simulation purposes as all the dev tools are 32 Bit
2) "Where can i find 64 bit Microsoft.SqlServer.ManagedDTS.dll " is basically SSIS. It is quite possibly the culprit. I am inclined to think you attempt to run the package where there no SSIS installed.
Arthur
MyBlog
Twitter

Receive message after importing serveral songs from CD into iTunes (latest ver 11.1.5.5)... "Error occurred while converting the file 'songname'. The required folder cannot be found." CD/DVD ROM is no longer recognized until restart.

Consistently receive the following message after importing serveral songs from CD into iTunes (latest ver 11.1.5.5)...
"Error occurred while converting the file 'songname'. The required folder cannot be found."
CD/DVD ROM is no longer recognized until computer is restarted.

I have the same problem. I recently moved my music from a Vista PC to a new Laptop with an external CD drive. It will copy one song from the CD and it will show in the Music file and then I get the message ' Error importing a CD - Folder not found'. I must unplug the CD drive and plug it back in. I have seen no fix for this problem.

URL from PushNotificationChannelManager cannot be found

Similar Messages

Maybe you are looking for