URL Get HTTP Document Bug (LV2012)

I know the Internet Toolkit is deprecated, but since it's still available it should still work.
Unfortunately the URL Get HTTP Document.vi does not work in Internet TK 2012 for other than text files. It worked fine in LV8.5 with the corresponding Internet TK, but the 2012 version only returns the last part of the content.
I'm going to switch to the HTTP Client palette, but it's still a pain to find such problems in TKs that used to work fine - losing a lot of time to find the issue.
See attached snippet which reads a .rtf file from ni.com. HTTP client palette returns correct contents, URL Get HTTP Document only the last chunk.

Hi,
I managed to get the URL Get HTTP Document.vi from the ITK to download .tiff files (to save them to a hard-drive location) from a connected device in LV2012 32-bit.
But now I need to transfer this code over to a computer unsing LV2012 64-bit, hence no ITK - has anyone made/got a VI that will do the job of "URL Get HTTP Document.vi", without the need for the ITK libraries, in LabVIEW 2012 64-bit? Or can show me a way of doing this, with relative ease?
Many thanks!

Similar Messages

Can´t read page containing XML using GET HTTP Document

Hello forum users,
I'm have a problem with the LabVIEW Internet Toolkit and I'm woundering if its me that is doing something wrong or if it is a limitation of the VI.
I have a robotic application which comunicates with LabVIEW via internet.
the robots sends and receives information via XML which is posted on a webpage.
I've been trying to use the LabVIEW Internet Toolkit's GET HTTP Document. while I can obtain HTML data from any webpage when I try to access my webpage containing XML data I get an Error 66 (connection closed by peer message).
What is even stranger is that on two distinct occasions the program returned the XML data
The page is set up so that when accesed (for example http://192.168.0.102:4950/move.cgi?op=setVel&vel=300). It will define the robot's speed at 300 mm/s and return a page with a simple XML data such as
<result>true</result>
When I access the page in using the Get HTTP Document, the request is sent. the robot does the action required but the XML data I need isn't returned.
I have applications that do this in C++, python, and MatLab, without a problem and I didn't want to have to resort to low level TCP/IP functions.
any suggestions???
Is this a limitation of the GET HTTP Document VI (it only gets HTML documents)
Thanks in advanced
Bruno Noronha
Certified LabVIEW Associate Developer
Using LabVIEW 8.6

Hi, Bruno.
Maybe my case will help you. I've faced a problem similar than yours. I have a network camera whose API is HTTP based, I mean, I can control it using HTTP requests, i.e. http://myserver/axis-cgi/bitmap/image.bmp
takes a picture and returns it in bmp format.
There are other requests that can send data back, i.e.
http://<servername>/axis-cgi/com/ptz.cgi?query=position
retrieves pan and tilt degrees and zoom value (it is a PTZ camera or pan-tilt-zoom, it has two joints that rotate left-right and up-down, and a zoom). In this case, the information is sent in plain text. But I had like you an error 66 in TCP Read.vi.
After debugging "Get HTTP document.vi" I noticed this information is sent back, but due to the error in "TCP Read.vi", it's not transmitted to the remaining TCP functions in execution order, and finally is lost.
In order to debug "Get HTTP document.vi" you'll need to unmark "Reentrant execution" and mark "Allow debugging" in VI Properties->Execution.
The information string enters "TCP Read.vi" by the terminal "buffer in", and leaves it by "buffer out". The next function, "TCP Read Stream.vi" receives also this string, but it's lost in case there's an error in the entry error cluster. So I removed the wire the connects this two TCP VIs, and finally got the string at the "content" terminal.
It may not be the most orthodox solution, but at least it let me continue working. If anybody has fixed this issue conveniently, it'd would interesting to share it with us.
Regards,
Francisco
PS. I was with an internship in USP (Sao Carlos, Brazil) for three months in 2007. In this time I visited many times Campinas and its university. Nice place and really good moments :
Hi, Bruno.
Maybe my case will help you. I've faced a problem similar than yours. I have a network camera whose API is HTTP based, I mean, I can control it using HTTP requests, i.e.
http://myserver/axis-cgi/bitmap/image.bmp
takes a picture and returns it in bmp format.
There are other requests that can send data back, i.e.
http://<servername>/axis-cgi/com/ptz.cgi?query=position
retrieves pan and tilt degrees and zoom value (it is a PTZ camera or pan-tilt-zoom, it has two joints that rotate left-right and up-down, and a zoom). In this case, the information is sent in plain text. But like you I got an error 66 in "TCP Read.vi".
After debugging "Get HTTP document.vi" I noticed this text information is sent back, but due to the error in "TCP Read.vi", it's not transmitted to the remaining TCP functions in execution order, and finally is lost.
In order to debug "Get HTTP document.vi" you'll need to unmark "Reentrant execution" and mark "Allow debugging" in VI Properties --> Execution.
The information string enters "TCP Read.vi" by the terminal "buffer in", and leaves it by "buffer out". The next function, "TCP Read Stream.vi" receives also this string, but it's lost if there's an error in the entry error cluster. So I removed the wire that connects this two TCP VIs, and finally got the string at the "content" terminal.
It may not be the most orthodox solution, but at least it let me continue working. If anybody has fixed this issue conveniently, it'd would interesting to share it with us.
Regards,
Francisco
PS. I was with an internship in USP (Sao Carlos, Brazil) for three months in 2007. In this time I visited many times Campinas and its university. Nice place, nice people and really good moments

I'm trying to read some XML data from temperature logger over my network. I'm using LabView version 2009 sp1. I'm using the URL Get Document Vi. It works fine when using Internet sites like google or foxnews etc...

I'm trying to read some XML data from temperature logger over my network. I'm using LabView version 2009 sp1. I'm using the URL Get Document Vi. It works fine when using Internet sites like google or foxnews etc...
When I use it with my temperature logger most of the time I get an Error 66...but some times it does work and actually retrieves the document.
I can use the same address "http://172.22.21.68/XMLfeed.rb" (Internet Explorer or Google Chrome) in my browser and get a response every time. When accessing from my browser the server in the temperature logger does take around 6 seconds to respond, but it does respond every time.
Is the URL Get Document Vi exceeding a timeout? If so, where can I set it to wait longer?
Attachments:
Error 66.jpg ‏183 KB

It looks like the TCP Buffered Read has a 2.5 sec timeout, I believe that is where I had trouble as well. Try creating your own URL Get HTTP Doc vi in which you call URL Get Document in normal mode, with an appropriate number of characters to fetch (enough characters so that you capture all the important data in the XML file).
Attachments:
ex1.PNG ‏33 KB

Get HTTPS URL for Web dynpro application

We are using SSL. By default the URL generated for the Web dynpro application is HTTP.
We went to SICF, and deactivated the HTTP service. That made the URL point to HTTPS.
But few problems started coming because of it:
- Our Content server became inaccessible.
- Every time server is re-started, we need to manually go and de-activate HTTP Service.
We even tried to set the parameter icm/icm/HTTP/redirect_0. But problem is not solved.
I know this question is asked before, but every time the answer is to read the help document on ICM.
What's the correct way for any webdynpro application to point to HTTPS? I don't think de-activating HTTP service is the right way.
Any suggestions please?
Thanks in adv.

Thanks a lot Thomas. I'd ask the Portal Admin to try it out.
There is another similar problem we are facing: I have embedded Webdynpro in R/3 screen. Then used the cl_gui_wdr_viewer class's load_application method passing HTTPS protocol.
It returns HTTPS URL only, but is not showing up on users' laptops.
Earlier we were not passing HTTPS protocol, so generated URL was HTTP, and it was not showing on users' screen (can show in ours). Reason we found out is that users' site has HTTP port blocked. They cannot show any HTTP url.
So we changed to get HTTPS URL, but that also gives the same problem. It is still trying to get HTTP url.
Here is the URL that the users got: (when they right click to see the URL generated)
res://ieframe.dll/dnserrordiagoff_webOC.htm#http://abc.def.jil:8000/sap/public/myssocntl?sap-client=220
Can give any clues on why this is going wrong? Cannot raise OSS as I know embedding Webdynpro in R/3 is not supported
Thanks in adv.

How to get the url of the document in quick parts?

I have document library in which there is one content type with the document template uploaded. In the footer of the document, I want to show the URL of the document which is opened in word application.
Is there any way to get the URL? I am not able to see the field in Quick Parts while configuring footer of document template.

Alexdu_,
You can create a single line text site column in that content type to hold URL information.
Create a SPD workflow to populate URL field using update field of current list.
This custom column will be available as Quick part in word.
This could be an alternate approach as URL is not available as quick part field.
Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

Getting error when connecting to url via https

I am connecting to a url via https. Everything seems to work when I open the connnect as follows.
conn = (HttpsURLConnection)theURL.openConnection();
//Set the proper connections properties
conn.setRequestMethod("POST");
conn.setRequestProperty("Content-type", "application/x-www-form-urlencoded");
conn.setDoOutput(true);
conn.setDoInput(true);
But when I try to send data with the following code:
StringBuffer sendThis = new StringBuffer();
sendThis.append( URLEncoder.encode("uid=", "UTF-8") );
sendThis.append( URLEncoder.encode("This is the UID", "UTF-8") );
/* PrintWriter pout = new PrintWriter( new OutputStreamWriter( conn.getOutputStream(), "8859_1"), true);
pout.print (sendThis.toString());
pout.flush();
I get an error that says "could not find trusted certificate"
Could not find trusted certificate
javax.net.ssl.SSLHandshakeException: Could not find trusted certificate
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.b(DashoA6275)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(DashoA6275)
at com.sun.net.ssl.internal.ssl.ClientHandshaker.a(DashoA6275)
at com.sun.net.ssl.internal.ssl.ClientHandshaker.processMessage(DashoA62
75)
at com.sun.net.ssl.internal.ssl.Handshaker.process_record(DashoA6275)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(DashoA6275)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(DashoA6275)
at com.sun.net.ssl.internal.ssl.AppOutputStream.write(DashoA6275)
at java.io.OutputStream.write(OutputStream.java:58)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.startHandshake(DashoA6275)
at sun.net.www.protocol.https.HttpsClient.afterConnect(DashoA6275)
at sun.net.www.protocol.https.AbstractDelegateHttpsURLConnection.connect
(DashoA6275)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLCon
nection.java:562)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getInputStream(Dash
oA6275)
What am I missing ?
thanks in advance.
kris.

You have to make sure that the cert for the CA which signed the server's
certificate is in your keystore (cacerts) file.
Check out 'keytool' and the JSSE readme.
Cheers,
Billy.

Web Service URL length limits, LV2013 vs LV2012

(* CROSS POST: http://lavag.org/topic/18435-web-service-url-length-limits-lv2013-vs-lv2012/ *)
(* Please reply in this forum. I have marked the other thread to put replies here. *)
Has anyone noticed a reduction to the limit on URL length for Web Services between LV versions 2012 and 2013?
Under LV2012, a RESTful web service appears to accept URL with lengths at least as long as 4096 characters. With LV2013, the max URL length appears to be 511 characters for both RESTful and Project Item web services. Unfortunately for me the project I just converted trips over this issue. My goal with posting this query to here is to improve my understanding of this limitation before I decide how best to modify my code. Certainly using POST rather than GET with a long URL is an option, but again, I'm looking to understand the change in limitation before I choose a solution.
To illustrate I have attached three mostly identical projects which demonstrate the issue. In each case the project contains a webservice consisting of a single VI, "ComputeLength", which takes a String as an input parameter and which outputs the length of the string. The three projects are as follows.
1. LV2012 RESTful web service.
2. LV2013 RESTful web service.
3. LV2013 Project item web service.
The web service contains a single VI. For the RESTful examples, the web service is started by selecting Deploy from the Build specification right click menu. For the Project Item example, the web service is started by selecting Start from the MyComputer/WebService right click menu. The use of this example is demonstrated with the following URL:
(note that the port is 8080 for the two RESTful examples and is 8001 for the Project item web service if used in Debug mode, which is the default for the above instruction.)
http://localhost:8080/webservice/computelength?string=1234567890
And the output looks like this.
<Response>
<Terminal>
<Name>StringLength</Name>
<Value>10</Value>
</Terminal>
</Response>
To see the issue, extend the string parameter such that the URL contains more than 511 characters beyond the port number. For example something like this, http://localhost:8080/webservice/computelength?string=1234567890123456789012345678901234567890....(keep repeating)
For the LV2012 example the string parameter may be at least as long as 4000 characters, which I've demonstrated using Chrome as my browser. For both of the LV2013 examples the URL is limited to 511 characters after the localhost and the port number.
Anyone know whether this is a bug or this is an intentional design change? How about whether the URL length limit is configurable?
I am also consulting NI tech support and will report back their response.
Any advice appreciated.
Thanks,
Martin
Solved!
Go to Solution.
Attachments:
mywebservice.LV2012.RESTful.zip ‏12 KB
mywebservice.LV2013.RESTful.zip ‏12 KB
mywebservice.LV2013.ProjectItem.zip ‏11 KB

Solution found. Apparently starting in LV 2013, there is a default limit of 512 to the URL length. The default limit may be overridden as described below.
Martin
This is Brian in Applications Engineering from National Instruments. I am following up regarding the 511 character limit in your Web Service HTTP request following the port number. After some research I've figured out that the issue is related to a default web server setting called "LimitUri," which limits the maximum length of a URL. The default setting is 512 characters which is why we are seeing this issue.
There are multiple ways of changing the URL length limit depending on how you are using your web service. If you are publishing the web service using the Application Web Server then modify "C:\Program Files (x86)\National Instruments\Shared\NI WebServer\NIWebAppServer.conf" and add "LimitUri 4096" to the end of the file without the quotes.
If you are running the Debug Web Server by just clicking start on the web service then modify "C:\Program Files (x86)\National Instruments\LabVIEW 2013\resource\webserver\niwsdebugserver.conf" and add "LimitUri 4096" to the end of the file without the quotes.

Any way to get HTTP header in web dynpro Java?

Is there any way to get HTTP header in web dynpro java? This method gives me the params. Is params same as header? It doesn't have any way to retrieve header data. I am on NW 7.0.19
WDProtocolAdapter.getProtocolAdapter().getRequestObject().getParameter("param");

Dear Faraz,
I'm afraid the code you've pasted is only to retrieve URL parameters.
Have you tried this document to see if it offers any good hint:
[http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0446f5c-fcb9-2910-e082-88becbe3ddc9]
Not sure if you can process the HTTP header with a WD4J.
An alternative could be to develop some Portal component in plain JAVA working as a proxy to call your WD4J afterwards.
That portal component would process your HTTP header and forward any parameter to your WD4J.
But this is me just guessing.
Kind Regards
/Ricardo

Getting the document ID of an uploaded document

Hello All,
Perhaps someone out there can help with this assumingly simple task of getting the document id of a file that was uploaded.
Back ground:
I have a separate system which retains records of transactions. Paperwork is often received as a part of these transactions and my intention is to store those documents into SharePoint. I want to store the document id on the record to facilitate easy retrieval
of the document. No need to search by meta tags or the like; I will have the specific document id which will point to the document.
Environment:
I currently have SharePoint 2013 online. The program that creates and maintains the records is an in-house VB.Net application running on 4.5 framework. The document repository is defined as a record center and contains several content types and meta tags
(columns) already defined. Again the application is written in VB.
Goal:
Upload a given document, get the document id, and store that id to the record.
What I have done:
I have created a function that will take a given file name and proceed to upload the document to the given SharePoint list. It then proceeds to update the meta tags with information that will help find it using alternative methods. I have also spend hours
upon hours researching every corn of every forum to find an answer. But to no avail.
The problem:
I cannot find how to get the document id of the document that I uploaded. Either it is so easy that no-one has bothered to post how it is done. Or it is not doable. I say this because I can find absolutely no reference to how to get the document id. There
is lots of references on how to get the name, the url, the meta tags, etc... But NO example on getting the document id. Very frustrating. Below is the code that I am using. Can someone suggest how I can go about getting the document id. Please treat me like
I am a noob and spell it out. Sample code would be great! I have already burnt way too much time on this seemingly simple task. I would greatly appreciate any help.
Thanks
Mike
Imports Microsoft.VisualBasic
Public Class Class1
Private mVarTitle As String
Private mVarStockCode As String
Public Property DocTitle() As String
Get
Return mVarTitle
End Get
Set(value As String)
mvartitle = value
End Set
End Property
Public Property StockCode() As String
Get
Return mVarStockCode
End Get
Set(value As String)
mVarStockCode = value
End Set
End Property
Public Function UploadFile(FileName As String, Path As String, ListName As String, ContentType As String)
'For each record, copy the file from knowledgetree to the local directory and then upload it with the metatags.
Dim mKTFile As String = String.Empty
Dim mFileName As String = String.Empty
Dim mSource As String = String.Empty
Dim mTarget As String = String.Empty
Dim mTitle As String = String.Empty
Dim mStockCode As String = String.Empty
Dim mDocId As String = String.Empty
Dim mCTid As String = String.Empty
Dim mBaseKTFolder As String = "\\<computerName>\c$\Program Files\ktdms\documents\"
mFileName = FileName
mKTFile = Path
mTitle = mVarTitle
mStockCode = mVarStockCode
mKTFile = Replace(mKTFile, "/", "\")
mSource = mBaseKTFolder & mKTFile
mTarget = ".\temp\" & mFileName
UpdateStatus("uploading " & lrows.ToString)
' Copy the file to a new folder and rename it.
My.Computer.FileSystem.CopyFile(
mSource,
mTarget,
Microsoft.VisualBasic.FileIO.UIOption.AllDialogs,
Microsoft.VisualBasic.FileIO.UICancelOption.DoNothing)
Dim mpassword As New System.Security.SecureString()
Dim mp As String = "<adminPassword>"
For k = 1 To Len(mp)
mpassword.AppendChar(Mid(mp, k, 1))
Next
Dim mycred As New Microsoft.SharePoint.Client.SharePointOnlineCredentials("<AdminUserId>", mpassword)
Dim url As String = "https://<SharePoint URL>/sites/rms"
Dim listTitle As String = ListName
Using clientContext = New ClientContext(url)
clientContext.Credentials = mycred
Using fs = New System.IO.FileStream(mTarget, System.IO.FileMode.Open)
Dim fi = New System.IO.FileInfo(mTarget)
Dim list = clientContext.Web.Lists.GetByTitle(listTitle)
clientContext.Load(list.RootFolder)
clientContext.ExecuteQuery()
Dim fileUrl = [String].Format("{0}/{1}", list.RootFolder.ServerRelativeUrl, fi.Name)
fileUrl = Replace(fileUrl, "#", " ")
Microsoft.SharePoint.Client.File.SaveBinaryDirect(clientContext, fileUrl, fs, True)
Dim web As Web = clientContext.Web
Dim newFile As Microsoft.SharePoint.Client.File = web.GetFileByServerRelativeUrl(fileUrl)
clientContext.Load(newFile)
clientContext.ExecuteQuery()
'*****this section finds the content type and sets
Dim contentTypeColl As ContentTypeCollection = clientContext.Web.ContentTypes
clientContext.Load(contentTypeColl)
clientContext.ExecuteQuery()
mCTid = String.Empty
'/ Display the content type names that are available in the website
For Each ct As ContentType In contentTypeColl
If ct.Name = ContentType Then
mCTid = ct.Id.StringValue
End If
Next
'***************End content type find.
newFile.ListItemAllFields("ContentTypeId") = mCTid
newFile.ListItemAllFields("Title") = mTitle
newFile.ListItemAllFields("StockCode") = mStockCode
'******This is the section where I have tried to get the uploaded document Id.
'******None of these statements work.
mDocId = newFile.ListItemAllFields("Document ID").ToString
mDocId = newFile.ListItemAllFields("_dlc_DocId").ToString
mDocId = newFile.ListItemAllFields("DocID").ToString
newFile.ListItemAllFields.Update()
clientContext.Load(newFile)
clientContext.ExecuteQuery()
End Using
End Using
' Delete the file .
My.Computer.FileSystem.DeleteFile(mTarget)
UploadFile = mDocId
End Function
End Class

Thanks Micheal for confirming SharePoint version.
Is your VB code working with SharePoint 2010 Client Object model? It would give the idea that there is some poroblem in SharePoint 2013 CSOM.
By the way, I tried the below code in C# and I was able to print the Document ID and it worked for me.
using (ClientContext clientContext = new ClientContext("http://<<Server Name>>:2425/sites/test/"))
 Web site = clientContext.Web;
 // Change your document library name
 List docLib = site.Lists.GetByTitle("tester");
 clientContext.Load(docLib);
 CamlQuery caml = new CamlQuery();
 ListItemCollection items = docLib.GetItems(caml);
 clientContext.Load(items);
 clientContext.ExecuteQuery();
 // Iterate through all items in the document library
 foreach (ListItem item in items)
 Console.WriteLine("File Name:: " + item.FieldValues["Title"]);
 Console.WriteLine("Document Id : " + item.FieldValues["_dlc_DocId"]);
 Console.ReadLine();
Output:
File Name:: Remove_URL
Document Id : TEST-1-1
File Name:: Request
Document Id : TEST-1-2
Please check that your code is working with SP2010 or not?
Thanks
Ashish
Ashish Gupta Click "Vote As Helpful"! if you think that post is helpful in responding your question click "Mark As Answer, if you think that this is your answer for your question.

URL Link to Documents in Other systems

Hi,
Is it possible to have a url link saved as a document in OCS? We have somme documents that cannot be moved to OCS( business decision). These documents reside in various systems and are raccessible through a web url. Is there any way to create this web URL as a document in OCS?
what we are looking is if we click on this document link, it should open the document which is in other systems..
Please let me know

You can create a blank html page with a meta refresh tag that redirects user to the link in the other system, e.g.
<META HTTP-EQUIV=Refresh CONTENT="10; URL=http://www.myothersystem.com/my_link.htm'">
Optionally, you can accomplish the same with a blank page that includes a javascript redirect function, e.g.
<script language="JavaScript" type="text/javascript">
location.replace('http://www.myothersystem.com/my_link.htm');
</script>
Upload the blank page to Content Services. When users clicks on the page, they will get redirected to the document in the other system.
-- George

This is showing up on videos I try to view. I have latest update. It is a box that displays over video that says, get video URL, get embed code, etc. how do I correct it?

A Box has just started showing up that has the following.
get video url
get video URL at current time
Get embed code
report playback issue
get debug info
stats for nerds
about the HTML.5 player
this is on every video on face book. How to fix?

I had the same issue.
I had a youtube downloader app that had a plug-in installed on my Home Safari. I deleted that app. and the plugin. Not sure if that was the culprit, but I figured I'd try.Thought maybe some bug crossed over when syncing the two safaris.
Anyway, I ended up unlinking my Mobile Safari to my Home Safari (iPad; iCloud/Safari/OFF)
A prompt will come up asking what you want to do with previously synced data: Delete from My iPad (don't worry, you'll get it back)
Your bookmarks should disappear.
Reset HOME Safari : Safari/Reset Safari (everything checkmarked)
Turn ON the Mobile Safari again (if you want to relink to the Home version) or keep off (and rebuild it from scratch on iPad alone)
Personally, I turned it on, got my bookmarks back then turned it off and pressed Keep on my iPad.
Now the two aren't linked and I have the bulk of my bookmarks back.
There might be variations of this solution so play around with the process and be sure to refresh your Mobile Safari browser on a video clip to see if it takes.

How do I get pages documents to share between a PC and an IPad?

I have read the instructions for both the IPad and the PC cloud installation and the document sharing portion. I did everything that the apple website said to do but my documents aren't sharing. Everything is up to date: itunes, pages. How do i get the documents to share between my two devices?

In an attempt to be helpful in this thread, I present you with this:
http://www.insanelymac.com/forum/index.php?showtopic=43983
The keyboard drivers are in the first post.

Pbm with document name while generating URL for created document

Hi Gurus, 
 
When we upload a document and generate the URL for that document, and then while we paste the same in the explorer window to access it, I was able to see the dialog asking me whether to save or open the document with the actual document name. 
 
But, when I create a document using the template which we uploaded in SOLAR_PROJECT_ADMIN, and then generate the URL for that document, and then when I paste it in the explorer window to access it, the dialog now asks me to save or open the document, but it is not with the name of the actual document, but with the name of the template. e.g Business_Blueprint_template. 
 
Can anyone say why such a problem? and how to solve it. 
 
Useful answers will certainly be greatly appreciated. 
 
best regds, 
Alagammai. 

Hi Gerry,
try content matrix it gives you free 25 GB and it keeps metadata
http://www.metalogix.com/Products/Content-Matrix/Features.aspx
Kind Regards, John Naguib Technical Consultant/Architect MCITP, MCPD, MCTS, MCT, TOGAF 9 Foundation

Urgent requirement : security error accessing url and http error: standalone flex

Hi,
I have a requirement to create record from standalone flex. I am using Flex builder 3.
I used Flex-force toolkit to login to salesforce. The swf file generated when used internal to salesforce it works great.
But my requirement is to run it from public sites page / standalone pages. How will I configure it? I am getting error 'security error accessing url', default HTTP
The requirement is on priority, please help me to resolve this issue.
The login code is also furnished below. please help.
Full error details:
(com.salesforce.events::ApexFaultEvent)#0
bubbles = false
cancelable = true
context = (null)
currentTarget = (null)
eventPhase = 2
fault = (mx.rpc::Fault)#1
 content = (null)
 errorID = 0
 faultCode = "Channel.Security.Error"
 faultDetail = "Destination: DefaultHTTP"
 faultString = "Security error accessing url"
 message = "faultCode:Channel.Security.Error faultString:'Security error accessing url' faultDetail:'Destination: DefaultHTTP'"
 name = "Error"
 rootCause = (flash.events::SecurityErrorEvent)#2
 bubbles = false
 cancelable = false
 currentTarget = (flash.net::URLLoader)#3
 bytesLoaded = 0
 bytesTotal = 0
 data = (null)
 dataFormat = "text"
 eventPhase = 2
 target = (flash.net::URLLoader)#3
 text = "Error #2170: Security sandbox violation: file:///C|/Users/R/DOCUME%7E1/FLEXBU%7E1/TESTLO%7E1/BIN%2DRE%7E1/TESTLO%7E1.SWF cannot send HTTP headers to https://login.salesforce.com/services/Soap/u/14.0?1000.1153011256829."
 type = "securityError"
headers = (null)
message = (mx.messaging.messages::ErrorMessage)#4
 body = (null)
 clientId = "DirectHTTPChannel0"
 correlationId = "B8A1B02E-CE17-DCBA-4894-F2E4CBEB7C04"
 destination = ""
 extendedData = (null)
 faultCode = "Channel.Security.Error"
 faultDetail = "Destination: DefaultHTTP"
 faultString = "Security error accessing url"
 headers = (Object)#5
 DSStatusCode = 0
 messageId = "41F6A90D-ECAE-EA2D-7C84-F2E4DABD72F3"
 rootCause = (flash.events::SecurityErrorEvent)#2
 timestamp = 0
 timeToLive = 0
messageId = "41F6A90D-ECAE-EA2D-7C84-F2E4DABD72F3"
statusCode = 0
target = (null)
token = (mx.rpc::AsyncToken)#6
 message = (mx.messaging.messages::HTTPRequestMessage)#7
 body = "<se:Envelope xmlns:se="http://schemas.xmlsoap.org/soap/envelope/"><se:Header xmlns:sfns="urn:partner.soap.sforce.com"/><se:Body><login xmlns="urn:partner.soap.sforce.com" xmlns:ns1="sobject.partner.soap.sforce.com"><username>uname</username><password>pwdandsec token</password></login></se:Body></se:Envelope>"
 clientId = (null)
 contentType = "text/xml; charset=UTF-8"
 destination = "DefaultHTTP"
 headers = (Object)#8
 DSEndpoint = "direct_http_channel"
 httpHeaders = (Object)#9
 Accept = "text/xml"
 SOAPAction = """"
 X-Salesforce-No-500-SC = "true"
 messageId = "B8A1B02E-CE17-DCBA-4894-F2E4CBEB7C04"
 method = "POST"
 recordHeaders = false
 timestamp = 0
 timeToLive = 0
 url = "https://login.salesforce.com/services/Soap/u/14.0?1000.1153011256829"
 responders = (Array)#10
 [0] (::SalesForceResponder)#11
 result = (null)
type = "fault"
Login code:
[Bindable] public var sfdc:Connection = new Connection();
private function login():void {
Security.loadPolicyFile("http://salesforce.com/services/crossdomain.xml");
var lr:LoginRequest = new LoginRequest();
lr.username = "uname";
lr.password = "pwdtoken";
sfdc.protocol = "https";
sfdc.serverUrl = "https://login.salesforce.com/services/Soap/u/14.0";
lr.callback = new AsyncResponder(loginSuccess, loginFault);
sfdc.login(lr);

This is resolved.
I have copied the crossdomain.xml file to tomcat Root folder
and the issue is resolved.

Parameter of Source-portion of url gets lost

Hi Expert,
following Situation:
Default List-View-WebPart from a custom List added to a Enterprise-Wiki-Page.
First column in the List-View is the edit button to open the related edit-Form.
Because of a custom Edit-Form which is not set as the default for edit i have to relink to my specific Form.
I have done this by this script which is included by Script-Editor-WebPart:
var tags = $('a[onclick*="84858E12"]');
if(tags)
tags.each(function ()
var att = $(this).attr('onclick');
if(att)
if(att.match(/ID=([0-9]*)/))
var id = $(this).attr('onclick').match(/ID=([0-9]*)/)[1];
var bo = $(this).closest('td').next('td').find('a').text();
if(bo)
$(this).removeAttr('onclick');
$(this).attr('href', '/Lists/Leads/LeadEdit.aspx?ID=' + id + "&BO=" + encodeURIComponent(bo));
$(this).attr('onclick', 'GoToLink(this);return false;');
If i click a edit button to open my edit form everything works fine and the URL has correct values. The source Portion works fine if i close the edit form (save or cancel). So far so good.
In last mentioned edit form i have another List-View-WebPart (Added through SharePoint-Designer) which holds data of a related list. Filter is working fine here. For this List-View i also have to relink the edit button to another specific edit form. I have
done this in the same way as i did it before. The important part of the script:
$(this).click(function(e)
e.preventDefault();
var currentid = $(this).attr('href').match(/ID=([0-9]*)/)[1];
var encbo = encodeURIComponent(getBO());
$s = "/Lists/Com2Know/Edit.aspx?ID=" + currentid + "&BO=" + encbo+ "&Source=" + source + "&BO=" + encbo;
location.href = $s;
This also works fine. Source Portion is shown and correct. If i copy the source Portion and paste it to a new browser tab it is working fine. But if i Close this edit form (save or cancel) a Parameter of the source portion of the URL gets lost somehow and
now i'm not there where i wanted to be. The URL is as follows (changed hostheader to ...)
http://.../Lists/Com2Know/Edit.aspx?ID=86&BO=LE%2F2014%2F2000084&Source=http://.../Lists/Leads/LeadEdit.aspx?ID=84&BO=LE%2F2014%2F2000084
So i should go to http://.../Lists/Leads/LeadEdit.aspx?ID=84&BO=LE%2F2014%2F2000084
but i end up here: http://.../Lists/Leads/LeadEdit.aspx?ID=84
So my Parameter BO is missing.
Do i miss something from specification?
With Kind regards,
Ronny

Sorry Folks, i got it myself and i hope it is useful for somebody else.
Just mask the ampersand for Parameters in source Portion with %26
So in my case: source + "%26BO="
Kredits to Marc D Anderson. Thanx!
Ronny

URL Get HTTP Document Bug (LV2012)

Similar Messages

Maybe you are looking for