URL_PIPELINE_NOT_FOUND

Hi Gurs
We are facing issue of transfering materials from SRM to CCM and in SXMB_MONI i found this error.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIProtocol</SAP:Category>
<SAP:Code area="MESSAGE">URL_PIPELINE_NOT_FOUND</SAP:Code>
<SAP:P1>/sap/xi/engine/</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Pipeline ID , which is expected as value of attribute "type" in the URL, does not exist in the Integration Engine (URL = /sap/xi/engine/)</SAP:Stack>
with regards
Manjunath

Hi Manjunath
This may be a configuration problem, entered the wrong URL for posting the meaasge to IS,
It should be, "/sap/xi/engine?type=entry"
Ur Integration Server Pipeline URL is not correctly set in SLD.
U log onto SLD, go to Business Systems and choose the Integration Server Business System (Business System of type Integration Server). In that chnage the pipeline URL so that it ends with "/sap/xi/engine?type=entry.
check with this link also
Re: Error in file-file scenario: HTTP response contains status code 503
Thanks!!

Similar Messages

Error in file-file scenario: HTTP response contains status code 503

Hi folks,
I've encountered the foll error in file-file scenario:
Testing file-file scenario (followed the blog: https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/flatFILETOFLATFILE&)
Initially i was hving problems with recvr comm channel, which are now resolved. File is sent successfully but not recvd. I tried to modify the scenario above and change the file type to 'Text' but still got the same error.
I've checked SICF -->default_host/xi/engine , we dont maintain logon data there. when i test the default_host/xi/engine service, it resolves into an ip addr as follows:
http://<hostname>.<domain.com>:8001/sap/xi/engine?sap-client=<clientNo>
(Also, we hv a BW system running on the same server ,which uses a fully qualified domain, while we dont which is why we get the above domain. Im not sure if there are any issues with that.)
and we get the foll error:
Error Code 10060: Connection timeout
If i remove the domain manually, im prompted for userid/pwd and get the foll result:
- <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP:Header />
- <SOAP:Body>
- <SOAP:Fault xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<faultcode>SOAP:Client</faultcode>
<faultstring>Pipeline specified in URL attribute (type) not existing</faultstring>
<faultactor>http://sap.com/xi/XI/Message/30</faultactor>
- <detail>
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIProtocol</SAP:Category>
<SAP:Code area="MESSAGE">URL_PIPELINE_NOT_FOUND</SAP:Code>
<SAP:P1>/sap/xi/engine?sap-client=<clientNo></SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Pipeline ID , which is expected as value of attribute "type" in the URL, does not exist in the Integration Engine (URL = /sap/xi/engine?sap-client=811)</SAP:Stack>
</SAP:Error>
</detail>
</SOAP:Fault>
</SOAP:Body>
</SOAP:Envelope>
also, we dont hv any overload issues as this is dev env and not many of us are using the xi server. Would really appreciate if any of you can share your inputs on how to resolve this. Thanks!!
cheers
Prachi

Hi ,
Look in to this for all errors
/people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
The server is currently unable to handle the request due to a temporary overloading or maintenance of the server. The implication is that this is a temporary condition which will be alleviated after some delay. If known, the length of the delay MAY be indicated in a Retry-After header. If no Retry-After is given, the client SHOULD handle the response as it would for a 500 response.
Note: The existence of the 503 status code does not imply that a server must use it when becoming overloaded. Some servers may wish to simply refuse the connection.
Possible Tips: Because of J2EE application com.sap.aii.af.ms.app not active
Try to (re)start the application using the Visual Administrator Choose Server --> Services --> Deploy --> View on Application or restart the J2EE engine
The problem is that not all J2EE services can be started by the J2EE. i.e Start the Visual Administrator and select Server->Services->Deploy in the tree on the left. On the right-hand side, choose the Runtime tab page. You see a tree in the right window with all applications if you select the APPLICATION radio button. Check if they are running, otherwise choose Start. Usually the J2EE engine starts all services automatically.
Refer SAP Note 803145,807000,791655
<b>Award Points if found usefull.</b>

Plain J2SE Adapter Engine

Sap Guru's
I'm trying to configure an adapter to recieve text files out of a specified directory and integrate and convert them into a single xml file, with no further processing.
I get the following log:
Mon Oct 24 01:02:22 GMT-08:00 2005 *****
01:02:22 (4012): "Guaranteed Delivery" operation for 2 file(s) pending
01:02:22 (4023): File adapter initialized successfully
01:02:22 (4007): File adapter started
01:02:22 (4051): Process 1 file(s):
01:02:22 : c:\XItext\myfile.txt
01:02:22 (4052): Start processing "TXT" file "c:\XItext\myfile.txt" size 38 in "EO mode
01:02:22 (4062): Sending text message "6b29c560-446b-11da-be97-e3950a0a0222" type "application/xml" to Integration Engine... (message size: 38 bytes, URL: "http://cic040.cice.cic.ae:50000/sap/xi/engine?sap-client=000")
01:02:23 (4076): ERROR: Finished sending to Integration Engine with error "java.net.ConnectException: Connection refused: connect". Skip confirmation and quit this loop
01:02:23 (4064): File adapter processing complete
My target url is XI.TargetURL=http://cic040.cice.cic.ae:50000/sap/xi/engine?sap-client=000 ....
i have activated the adapter_plain in SICF..
Is this because i need to configure the adapter_plain and/or a pipleine URL and if so how do I configure them and check they're fine????

Dear Hans;
Thanks for you're help i changed the port to 8000 but i got a different error...
07:00:19 (4076): ERROR: Finished sending to Integration Engine with error "com.sap.aii.messaging.net.TransportException: HTTP 500 Pipeline specified in URL attribute (type) not existing
http-Response:
set-cookie: sap-usercontext=sap-client=000; path=/
content-type: text/xml
content-length: 985
content-id: <[email protected]>
soapaction: 'http://sap.com/xi/XI/Message/30'
server: SAP Web Application Server (1.0;640)
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP:Header>
</SOAP:Header>
<SOAP:Body>
<SOAP:Fault xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/"><faultcode>SOAP:Client</faultcode><faultstring>Pipeline specified in URL attribute (type) not existing</faultstring><faultactor>http://sap.com/xi/XI/Message/30</faultactor><detail><SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1"><SAP:Category>XIProtocol</SAP:Category><SAP:Code area="MESSAGE">URL_PIPELINE_NOT_FOUND</SAP:Code><SAP:P1>/sap/xi/engine?sap-client=000</SAP:P1><SAP:P2/><SAP:P3/><SAP:P4/><SAP:AdditionalText/><SAP:ApplicationFaultMessage namespace=""/><SAP:Stack>Pipeline ID which is expected as value of attribute "type" in the URL, does not exist in the Integration Engine (URL = /sap/xi/engine?sap-client=000)
</SAP:Stack></SAP:Error></detail></SOAP:Fault>
</SOAP:Body>
</SOAP:Envelope>
". Skip confirmation and quit this loop
07:00:19 (4064): File adapter processing complete
I went to transaction SXMB_ADM but i can't seem to find a way to configure the pipeline id...
Also when i try to check the integration engine configuration the system tells me that its not configured yet....
2 Questions:
1. Do i need to configure the integration engine as im not using it for any kind of processing?
2. Given the error in the above log is it a pipeline configuration error and how do i solve it???
Thanks alot for youre help

HTTP adapter

i am getting HTTP 401 unthorized error when sending a file HTTP > XI > Fileadapter
when i go to SICF and test service "engine" i am getting the following resposne. Is this correct? I have tried to add a logon information within the service.
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP:Header />
- <SOAP:Body>
- <SOAP:Fault xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<faultcode>SOAP:Client</faultcode>
<faultstring>Pipeline specified in URL attribute (type) not existing</faultstring>
<faultactor>http://sap.com/xi/XI/Message/30</faultactor>
- <detail>
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIProtocol</SAP:Category>
<SAP:Code area="MESSAGE">URL_PIPELINE_NOT_FOUND</SAP:Code>
<SAP:P1>/sap/xi/engine?sap-client=100</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Pipeline ID which is expected as value of attribute "type" in the URL, does not exist in the Integration Engine (URL = /sap/xi/engine?sap-client=100)</SAP:Stack>
</SAP:Error>
</detail>
</SOAP:Fault>
</SOAP:Body>
</SOAP:Envelope>
regards,
tony

That is all you need to maintain. There is a sample http send message code.
Follow this thread.
XI http-adapter; http-post test tool?
regards
Shravan

RFC to SOAP - Internet

Hi
I am working on RFC to SOAP scenorio.
In the PI, if the internet access is closed.
The interface is not working, even though i am able to open the target URL from PI internet browser.
In the PI, if the internet access is provided.
The interface is working.
The target URL is residing on the same network, on different JBOSS server which uses AXIS2 application.
Is it possible to invoke a webservice, with out internet connection
Pls let me know your thoughts
Regards
Madhan D

I observed one more thing, in the PI trouble shooting guide, for the HTTP 403 error
It is mentioned to "Activate the service engine in transaction SICF"
I found that Service is active.
But when we right click on the service and test it.
We are getting the following response "URL_PIPELINE_NOT_FOUND"
Check the response of Bhavesh in this thread:
Re: Proxy --> R/3 http error 403
Regards,
Abhishek.

Proxy -- R/3 http error 403

Hello all,
I have a problem sending data from XI to R/3 backend through an abap proxy. (xi adaptor)
I get http error code 403 (Forbidden).
I am pretty sure my logon is correct and I have the right user profile as well.
Does anyone have an idea?
Thank you
/Thomas Nørmark

Hi -
I could see that se xi service was not active. it is now
When i test the xi engine service i get this: "URL_PIPELINE_NOT_FOUND"
And when I test it from XI (xml moni) i get: "System not configured as Integration Engine"
what could this be?
Tank you
/THomas

Transmitting the message to endpoint error

Hi all,
I am getting following error while doing the File to RFC Scenario:
Error is;
SOAPFault received from Integration Server. ErrorCode/Category: XIProtocol/URL_PIPELINE_NOT_FOUND; Params: /sap/xi/engine?type=entry., ENTRY.; AdditionalText: ; ApplicationFaultMessage: ; ErrorStack: Pipeline ID ENTRY., which is expected as value of attribute "type" in the URL, does not exist in the Integration Engine (URL = /sap/xi/engine?type=entry.)
Transmitting the message to endpoint http://sapxidev.tatatel.co.in:8000/sap/xi/engine?type=entry. using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Received HTTP response code 500 : Pipeline specified in URL attribute (type) not existing.
Please, provide the solution for this
Thanks In Advance
Mahesh

Hi Ganesh,
It is opening properly.
the result is like this:
SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP:Header />
- <SOAP:Body>
- <SOAP:Fault xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<faultcode>SOAP:Client</faultcode>
<faultstring>Empty HTTP request received</faultstring>
<faultactor>http://sap.com/xi/XI/Message/30</faultactor>
- <detail>
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIProtocol</SAP:Category>
<SAP:Code area="MESSAGE">EMPTY_HTTP_REQUEST_RECEIVED</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Empty HTTP query received; message processing not possible</SAP:Stack>
</SAP:Error>
</detail>
</SOAP:Fault>
</SOAP:Body>
</SOAP:Envelope>

HTTP to SOAP scenario error

Hi guys,
I have developed an HTTP to SOAP scenario, in order to invoke a Web Service.
I am trying to test the scenario by using an HTTP client.
However, I am getting the following message, in the result:
Result:
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP:Header>
</SOAP:Header>
<SOAP:Body>
<SOAP:Fault xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/"><faultcode>SOAP:Client</faultcode><faultstring>Pipeline specified in URL attribute (type) not existing</faultstring><faultactor>http://sap.com/xi/XI/Message/30</faultactor><detail><SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1"><SAP:Category>XIProtocol</SAP:Category><SAP:Code area="MESSAGE">URL_PIPELINE_NOT_FOUND</SAP:Code><SAP:P1>/sap/xi/engine?type=entrynamespace=http%3A//famar.gr%3ADemoSOAP&interface=GetStockQuote_Sync_OB&service=HTML_Service&party=&agency=&scheme=&QOS=BE&sap-user=xiappluser&sap-password=++++&sap-client=100&sap-language=EN</SAP:P1><SAP:P2>ENTRYNAMESPACE=HTTP%3A//FAMAR.GR%3ADEMOS</SAP:P2><SAP:P3/><SAP:P4/><SAP:AdditionalText/><SAP:ApplicationFaultMessage namespace=""/><SAP:Stack>Pipeline ID ENTRYNAMESPACE=HTTP%3A//FAMAR.GR%3ADEMOS which is expected as value of attribute &quot;type&quot; in the URL, does not exist in the Integration Engine (URL = /sap/xi/engine?type=entrynamespace=http%3A//famar.gr%3ADemoSOAP&amp;interface=GetStockQuote_Sync_OB&amp;service=HTML_Service&amp;party=&amp;agency=&amp;scheme=&amp;QOS=BE&amp;sap-user=xiappluser&amp;sap-password=++++&amp;sap-client=100&amp;sap-language=EN)
</SAP:Stack></SAP:Error></detail></SOAP:Fault>
</SOAP:Body>
</SOAP:Envelope>
Do you have any ideas?
Also, I am not able to see in SXMB_MONI the messages that are generated.
This is only possible in Message Monitoring in RWB.
Thank you
Evaggelos

Hi Evaggelos,
The URL you used to generate the WSDL for your webservice is wrong:
URL = /sap/xi/engine?type=entrynamespace=http%3A//famar.gr%3ADemoSOAP&interface=GetStockQuote_Sync_OB&service=HTML_Service&party=&agency=&scheme=&QOS=BE&sap-user=xiappluser&sap-password=+++++&sap-client=100&sap-language=EN
It should be of the type:
http://host:port/XISOAPAdapter/MessageServlet?channel=<party>:<service>:<channel>
Thanks,
Varun

Unable to find channel ID

Hello,
I am running into some problems testing out a scenario using the test tool in the rwb that is supposed to do a simple map and write to a table using the JDBC adapter.
The error I get in the message monitor are:
Message Data - Error catagory: XI_J2EE_ADAPTER_ENGINE
Message Data - Error code: CHANNEL_DETERMINATION_FAILED
Audit Log - Error: Unable to find channel ID
Audit Log - Error: Delivery of the message to the application using connection AFW failed, due to: Couldn't find delivery channel for message:
Using the test configuration tool in the Configuration Bulider test is successful, it finds Rec Det, Interface Det, Interface Mapping and Rec Agreement etc.
If anyone can give me any pointers would be very appreciated!
Thanks
Nam

Hello!
Wow, that was quick!
I originally tried clicking directly on the adapter engine (central) and sending from there. That sends the message to http://ac4sap02:58100/MessagingSystem/receive/AFW/XI.
That generates the errors I listed below.
I tried following your weblog and clicking on the Integration Server and testing from there. Message is sent to:
http://ac4sap02:58100/sap/xi/engine?type=entry
This generates an error: Error when sending message: 404 Not Found.
When testing the engine service in SICF I get the errors below:
Pipeline specified in URL attribute (type) not existing
URL_PIPELINE_NOT_FOUND
Pipeline ID , which is expected as value of attribute "type" in the URL, does not exist in the Integration Engine (URL = /sap/xi/engine?sap-client=510
Thanks!
Nam

R3-XI-SRM Scenario

Hi there,
We want to routhe orders05 from our R3 system to SRM via XI. We tried by using receiver IDOC adapter, but it failed because XI wasn't able to get the metadata from SRM. What is the best way of sending orders05 from xi to SRM?
Any help is appreciated.
Thanks.
Karma

Hi there,
We created HTTP destination on XI to point to SRM, but while testing we get the following error.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIProtocol</SAP:Category>
<SAP:Code area="MESSAGE">URL_PIPELINE_NOT_FOUND</SAP:Code>
<SAP:P1>/sap/xi/engine</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Pipeline ID which is expected as value of attribute "type" in the URL, does not exist in the Integration Engine (URL = /sap/xi/engine)</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Does anyone know why is this happening?
Thanks,
Karma

SICF - Test Service

Hi,
In the SICF, during test service of SAP/XI/Engine, I am getting the following error:
- <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP:Header />
- <SOAP:Body>
- <SOAP:Fault xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<faultcode>SOAP:Client</faultcode>
<faultstring>Pipeline specified in URL attribute (type) not existing</faultstring>
<faultactor>http://sap.com/xi/XI/Message/30</faultactor>
- <detail>
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIProtocol</SAP:Category>
<SAP:Code area="MESSAGE">URL_PIPELINE_NOT_FOUND</SAP:Code>
<SAP:P1>/sap/xi/engine?sap-client=100</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Pipeline ID which is expected as value of attribute "type" in the URL, does not exist in the Integration Engine (URL = /sap/xi/engine?sap-client=100)</SAP:Stack>
</SAP:Error>
</detail>
</SOAP:Fault>
</SOAP:Body>
</SOAP:Envelope>
Could anyone please help me in resolving this issue?
Thank you in anticipation

Hi Andrews,
When tried testing from the SICF, the url shown is http://yhsapdev05:8000/sap/xi/engine?sap-client=100, but I understand that this should be changed to http://yhsapdev05:8000/sap/xi/engine?type=entry.
How to change this configuration?

URL_PIPELINE_NOT_FOUND

Similar Messages

Maybe you are looking for