BATCH-FTP-EWAY-OPERATION-ERROR

Hi all,
I get an error running my JCAPS application using an BatchFTP adapter. With the message subject BATCH-FTP-EWAY-OPERATION-ERROR.
The message is the following:
Message: Batch FTP eWay error when doing data transfer operation in [put()], message=[com.stc.eways.batchext.FtpFileException: BATCH-MSG-M0130: FtpFileClientImpl.doTransferPut(): put got exception [com.stc.eways.batchext.FtpFileException: BATCH-MSG-M0129: FtpFileClientImpl.doTransferPut(): Failed to storeFile. Reply from ftp server is [250 CWD command successful.].].].
The error message is:
<?xml version="1.0" encoding="UTF-8"?>
<Alert xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation=".\Alert.xsd">
<Id>0</Id>
<Type>Alert</Type>
<SeverityCode>2</SeverityCode>
<Severity>MAJOR</Severity>
<MessageCode>BATCH-FTP-EWAY-OPERATION-ERROR</MessageCode>
<Message>BATCH-FTP-EWAY-OPERATION-ERROR</Message>
<MessageDetails><![CDATA[Batch FTP eWay error when doing data transfer operation in [put()], message=[com.stc.eways.batchext.FtpFileException: BATCH-MSG-M0130: FtpFileClientImpl.doTransferPut(): put got exception [com.stc.eways.batchext.FtpFileException: BATCH-MSG-M0129: FtpFileClientImpl.doTransferPut(): Failed to storeFile. Reply from ftp server is [250 CWD command successful.].].].]]></MessageDetails>
<OperationalStateCode>7</OperationalStateCode>
<OperationalState></OperationalState>
<ObservationalStateCode>0</ObservationalStateCode>
<ObservationalState>UNOBSERVED</ObservationalState>
<ListenersNotified>0</ListenersNotified>
<PhysicalHostName>jcapsdr:19048</PhysicalHostName>
<EnvironmentName>BH_PROD</EnvironmentName>
<LogicalHostName>AD</LogicalHostName>
<ServerType>INTEGRATION</ServerType>
<ServerName>server</ServerName>
<ComponentType>EWAY</ComponentType>
<ComponentProjectPathName>prjBHToSATO</ComponentProjectPathName>
<ComponentName>BatchFTP2</ComponentName>
<TimeStamp>Tue Sep 06 11:16:23 EST 2011</TimeStamp>
</Alert>
What can be the problem?
Thanks for your help.
Cheers,
Andrew

If the File size is larger, then we encounter this exception.
Remedy: Restart of the service may solve
or split the file size and place them.

Similar Messages

Batch FTP eWay Error

Hi All,
I'm getting the following exception reported by an application making use of the Batch FTP eWay:
Batch FTP eWay error when doing data transfer operation in [put()], message=[com.stc.eways.batchext.FtpFileException: BATCH-MSG-M0130: FtpFileClientImpl.doTransferPut(): put got exception [com.stc.eways.batchext.FtpFileException: BATCH-MSG-M0129: FtpFileClientImpl.doTransferPut(): Failed to storeFile. Reply from ftp server is [250 CWD command successful.].].].Nested exception follows: ---
com.stc.eways.batchext.FtpFileException: com.stc.eways.batchext.FtpFileException: BATCH-MSG-M0130: FtpFileClientImpl.doTransferPut(): put got exception [com.stc.eways.batchext.FtpFileException: BATCH-MSG-M0129: FtpFileClientImpl.doTransferPut(): Failed to storeFile. Reply from ftp server is [250 CWD command successful.].].--- End of nested exception.
The FTP server seems to be up and responding when the error occurs; I can log on using the same credentials as those used by the eWay.
Has anyone seen this error and/or know what the issue may be?
Thanks in advance,
John

This problem is occuring randomly.
I read a set of file files and write it to mainframes datasets. While writing to mainframes I am seeing the issue occuring, but when I retry for same set of file, it works fine.
Can anybody explain better where can I look for more details.
I have log level set to finest for Batch eWay but no additional information in logs.
Thanks
Sachin
Edited by: user8307912 on Mar 9, 2011 10:11 AM
Edited by: user8307912 on Mar 9, 2011 10:11 AM

Problem with FTP put operation..??

hi frendz,
i'm facing some problem with FTP put operation. The Get operation(reading a file) is working fine. i'm using Apache FTP server.FTP User is having all read/write permissions. When i putthe file using FTP command prompt then its working fine. But using BPEL/FTP adapter put operation is not working.
Main thing is its not giving any error but When i check the directory then i dont fine any file ther. In fact BPEL process is detecting directory where i'm going to write the file. But after completing the BPEL process i dont get any file.
i am using opaque fomat. n just passing some data into input string which i'm assigning to <invoke>'s variable.
Thanks a lot
-Mishit

Error itself indicates the potential issues -
Please ensure
1. Specified remote output Dir has write permission
2. Output filename has not exceeded the max chararters allowed by the OS and
3. Remote File System has enough spaceRegards,
Anuj

Getting " Not enough memory for the operation error " in BOE

Hi,
We are using BOE 11.0.
we try to schedule a new report with multiple database logins for testing in BOE. When we run the report we are getting error like "Not enough memory for the operation error"
The same report has been executed successfully when we run using Crystal reports developer. The report is fectching less than 10K records from all the databases together.
Please let me know which is causing the issue and also let me know is there any limit in the number of databases connecting for a single report.
many thanks in advance for all your help.
Cheers,
Suri ;-)

Hi Sarthan,
Sorry. I'm new to BOE. We know only scheduling the reports creating folders etc. :-)
I've seen one parameter "Maximum Cache Size Allowed (KBytes)" and the value for this parameter is 5000.
If we change it to a big number whether we can solve the issue ? Please suggest.
Cheers,
Suri ;-)

"You do not have enough access privileges for this operation" error message on iTunes startup?

So I cleaned up my Macbook recently, and now I am fearing that I may have deleted something important.
Whenever I start up iTunes, I am met with the "You do not have enough access privileges for this operation" error message. I have read forums that advised editing the Get Info page for the iTunes library to allow all users and staff to "Read/Write", but doing this has not eliminated this message.
Any tracks that were not purchased play normally, but purchased tracks now require additional sign-in that I do not believe was required before. Other than this, iTunes performs normally.
Did I mess something up permanentliy or is there a way to fix this?

The problem was that my account wasn't authorized. But when I tried to authorize it, I got an error message saying that the authorization could not be completed. Thankfully, THAT was something that Apple Support had previously addressed.
See http://support.apple.com/kb/ts1277
Thanks, Apple.

FTP_R3_TO_SERVER gives error " FTP SubCommand Local Error"

Hi
I have an issue with the transfer of data from SAP internal table to FTP server
I am using the function module FTP_R3_TO_SERVER.
Using this function module I am able to transfer data only some times.
Most of the time it gives the error message "FTP SubCommand Local Error" .
Could someone help me resolve this error.
Its quite urgent.
Help to resolve this is much appreciated.
Regards

Hi Sharayu,
Kindly give your mail id I will send the code to your mail id.
Regards
Sudheendra

Operations error occured when executing LDAP query to read members of AD group in windows 8 operating system using javascript and active-x

My code javascript script is
objConnection = new ActiveXObject("ADODB.Connection");
objConnection.Provider="ADsDSOObject";
objConnection.Open("ADs Provider");
objCommand = new ActiveXObject("ADODB.Command");
objCommand.ActiveConnection = objConnection;
objCommand.CommandText = "SELECT sAMAccountName,displayName, givenName, SN,CN, mail,distinguishedName,primaryGroupToken,member,ADsPath,MemberOf FROM 'LDAP://"+GrpDomain+".corp.com' WHERE objectCategory='group'
and objectClass='group' and sAMAccountName='"+GrpName+"'";
objRecordSet = objCommand.Execute();
This code executes successfully on window 2008 server machine,
but gives "Operations error occurred" on windows 8 operating system
on line of code highlighted above

Hi,
In regard to scripts related issue, I suggest you refer to The Official Scripting Guys Forum to get professional support:
The Official Scripting Guys Forum
http://social.technet.microsoft.com/Forums/scriptcenter/en-US/home?forum=ITCG
Thank you for your understanding and support.
Best Regards,
Amy Wang

"FTP Subcommand: local error' in DMS

Hi Forum..
I have a problem with DMS while i'm doing Check in As 'Vault'
i'm getting an error "FTP Subcommand: local error'
wat r the settings tht i hav to do to overcum this error.
i have already checked with reports like
RSFTP002 & MCDOKVAULT.
itz wrking fine wit those reports but in DMS its throughing da above error.
Regards,
Vijay.
P.S: Useful info will be awarded with Points

Hi Vijay,
Is your system a Unicode system?
If so the problem can be resolved if you have a unicode version of
SAPFTP program in your desktop according to note 93042.
Please follwo the note 93042 and download the latest sapftp.
Execute sapftp -V on your command prompt. This should show you the ftp
version stating if it is unicode.
Best regards,
Christoph
P.S.: Please reward points for useful information.

Trying to install Square to accept credit cards and get KQHTTP Operation Error Error Domain error 442 What is this?

Trying to install Square to accept credit cards on my ipad. I get the following message. KQHTTP Operation Error Domain error 422. What is this?

I am having same problem. Did you find a solution?

Unable to complete this operation error

Hi,
I installed Firefox 4 and when I go to my HP printer properties and click on Printer Services I get "Unable to complete this Operation" error. If I uninstall Firefox it works fine. When I reinstall Firefox I get the same error. Any help would be appreciated because I would like to use Firefox.
Thanks,
Phil

Hi,
According to the error message, please use performance monitor to diagnose if it is a memory-related bottleneck and you can use the counters of the memory part in the article below:
https://technet.microsoft.com/en-us/magazine/2008.08.pulse.aspx
In addition, it may be due to thousands of open connections to the server are in a TIME_WAIT state. You can run "netstat -an" command on the affected server and client. If you see mutiple connections in the TIME_WAIT state, you can follow the article
to increase the number of TCP/IP connections:
https://msdn.microsoft.com/en-us/library/ee377084(v=bts.70).aspx
Furthermore, if you are running windows server 2003, please make sure that you have installed the KB 948496 and stop all services that you don't need.
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Why do I receive Offending Operator Error when opening illustrator created charts??

I have created a pie chart in illustrator and after I save and close I receive Offending Operator errors when reopening and my chart information is gone. This has happened to me twice between a six month period. I thought it was just corupt files, but sure enough I am having the same issue when trying to create again.
Can anyone offer suggestions as to what i am doing wrong?

Check your firewall, because some firewalls monitor secure connections (https) and send their own certificate instead of the website's certificate.
http://kb.mozillazine.org/Firewalls
otherwise see if this happen in a new profile :
http://kb.mozillazine.org/Profile_Manager
thank you

'Runtime Operation Error' on BPM/Workspace

Hi all,
When I'm logging into the BPM 11 G Work space I'm getting a error indicating *" Runtime Operation Error''* .
This error occurs only for my login. Other users not getting this and their logins are working properly...
What can be the issue?
Thank You..

Check the server log for the name of the of the task or process that this happens. Then in the soa dehydration store, check the status of this process via the query. select processId, processName, compositeName, revision, status from dev_soainfra.BPM_CUBE_PROCESS;
for the process set the status='-1'.
Restart the soa server and try again.
Hope this helps..cheers!

Runtime Operation Error in Workspace

Assigned users(jcooper) unable to see the list of deployed application assigned to him in the workspace. "Runtime Operation Error" is displayed when the workspace loads. Any reasons for the same? and how do we fix this?

user12963822,
What do you see in the weblogic console window when you try to login? What happens when other users login to the workspace?
Since a deployed application is not the thing that is assigned to a user, do you mean that there is an Initiate task in the swimlane to which jcooper is assigned that role?
Can you login to workspace as weblogic? If so, check the Roles assignments to make sure they are set correctly. This doesn't always come over during deployment the way you expect.
If you can't login to workspace at all, for any user, there is something more fundamental going wrong. What error messages do you see in the weblogic console window?
Heidi.

Error re-trying Stalled Operation Error

Hi,
We have a solution that uses Workspace and assigns tasks to users/queues. Sometimes we get stalled operation errors and we re-try them after fixing whatever may have been wrong in our solution. We currently have one stalled operation error that does not re-try successfully.
We instead get the below error from adminui:
When looking at the error in the server log, this is the error we get:
ERROR [com.adobe.idp.jobmanager.execution.workadapter.JobStoreAdapter] (http-0.0.0.0-8080-1) Job not found for job id f05f87640a8b04077cc5f27ad1a1e817
Does anyone have an idea what may cause this kind of an error? Your input will be much appreciated.
Thanks,
Enock

There are a lot of different opinions about partitioning in Mac OS X and you can read some of them here:
http://forums.cnet.com/5208-7592_102-0.html?forumID=25&threadID=44865&messageID= 530144
and here
http://forums.appleinsider.com/archive/index.php/t-8096.html
My opinion is that partitions cam be useful when:
1. the OS can't manage big volumes (as it was in the past)
2. the OS can't optimize the space on big volumes
3. want to install 2 or more separate OSes
4. organization (like in your case).
Now, OS X filesystem (HFS+) is robust and reliable and OS X is a multitasking system that parallelizes I/O operations like reading or writing a disk.
So if you have 2 separate hard disk the system can parallelize the operations (i.e. reading from one and writing into another one) but if you have 2 partitions the system (or better the disk subsystem) have to jump back and forth among the partitions.
About the linking schema of the Audio interfaces and the FW hard disks it can change: I connect my FW disk to the MOTU and the MOTU to the mac while a friend of mine have to put the disk before of his Presonus.
Thanks for the beer!
cheers
rob

Cannot load large CSV files in SignalExpress("Not enough memory to complete this operation" error)

Hi guys,
I'm new here and just have browsed
some of the related topics here regarding my problem but could not seem
to find anything to help me fix this problem so I decided to post this.
I currently have a saved waveform from an oscilloscope that is quite
big in size(around 700MB, CSV file format) and I want to view this on
my PC using SignalExpress. Unfortunately when I try to load the file
using "Load/Save Signals -> Load From ASCII", I always get the "Not
enough memory to complete this operation" error. How can we view and
analyze large waveform files in SignalExpress? Is there a workaround on
this?
Thanks,
Louie
P.S.>I'm very new to Signal Express and haven't modified any settings on it.

Hi Louie,
Are you encountering a read-only message when you tried to save the boot.ini file? If so, you can try this method: right-click on My Computer >> Select "Properties", and go to the "Advanced" tab. Select "Settings", and on the next screen, there is a button called Edit. If you click on Edit you should be able to modify the "/3GB" tag in boot.ini. Are you able to change it in this manner? After reboot, you can reload the file to see if it helps.
To open a file in SignalExpress, a contiguous chunk of memory is required. If SignalExpress cannot find a contiguous memory chunk that is large enough to hold this file, then an error will be generated. This can happen when fragmentation occurs in memory, and fragmentation (memory management) is managed by Windows, so unfortunately this is a limitation that we have.
As an alternative, have you looked at NI DIAdem before? It is a software tool that allows users to manage and analyze large volumes of data, and has some unique memory management method that lets it open and work on large amounts of data. There is an evaluation version which is available for download; you can try it out and see if it is suitable for your application.
Best regards,
Victor
NI ASEAN
Attachments:
Clipboard01.jpg ‏181 KB

BATCH-FTP-EWAY-OPERATION-ERROR

Similar Messages

Maybe you are looking for