URL Proxy setting with good performance

Hi All,
I'm looking for URL proxy setting for my project.I have implemented code for that, but it's taking 200-500milliseconds.So I'm looking for any good performance code for proxy settings.If any body are worked on that .Can you please share your sample code?,Then it'll be helpful for me.
Thanks and Regards
Pattanaik

no ,it's depends upon network.but whatever I was tested my application it's taking minimum 200 ms

Similar Messages

Need advise on large file processing with good performance

Hi All,
I am working on a program in which I have to read millions of records from application server file.For this, I am reading 1 million records each time and uploading into the DB-table.
what is the best approach to process the millions of records.what I am currently doing is, I read 1 million records one by one , modify each and every record based on some conditions and store them in one internal table and update the DB table.
I am also thinking alternate approach is,read 1 million into one internal table and after that within the loop, modify each and every records for given condition and update the DB table.
which approach is the best one?
you can advise me any other alternate approches with good performance.
Regards,
Nivas
Edited by: Nivas4081 on Jul 24, 2008 2:55 PM

Hi Joshi,
Thanks for your reply reply. I have tested both ways as I mentioned in my query but reading record by reocrd and update data packets takes less time than reading into iternal table,then modify and update the DB table.
Hi ralph,
Thanks for the reply.
The modifications are similar in all the lines.I get related data from other class/method,do some calculation and modify each each record.
Are there any performnace tricks to be followed when processing large amount of data.by the way I am reading certail amount of records say 400K and updating DB table using parallel processing.
Apart from this, any suggestions on this?
Regards,
Nivas

Ipad/iphone accepts browser proxy setting with IPSEC but not PC or Mac

I have two ASA5505's in failover and set up the the IPSEC client group policy for non-inherited browser proxy settings. I have a manual IP address and the typical port 8080 configured.
What is not working are Windows and Macbook laptop clients. iPads and iPhones accept the policy even though the built-in Cisco IPSEC client does not have a proxy setting on the ipad/iphone.
On a Mac, under Network Preferences, I can set the proxy manually for that VPN profile under any of the "Locations" and it will use the proxy settings. But, if I leave everything blank, even on a Windows 7 PC (Internet Options, Connections, LAN Settings), neither platform seem to accept or maybe it should be "receive" those settings.
I turned up the packet capture on the ASA and saw the ipad/iphone pointing all their browser traffic to the proxy:8080. But the Mac and PC (multiple hardware tested) are sending their packets to the actual host IP. So, the result is that the ASA sees a packet from the "outside" interface that is trying to go to the "outside" interface instead of the inside interface. In effect, it is trying to do a hairpin. I don't want to configure hairpin, I would rather solve this issue.
I know there are some other work arounds that I could do but I really need to figure out why the group policy for an IPSEC client vpn connection is not working.
Any thoughts? Did I miss something?

Enable "Transparent Tunneling" and "Allow Local Accces", under Transport

How to acquire serial data on a digital input line with good performance?

Hello,
we have a performance problem with our realtime controller. Our objective is, to read a 24-bit long digital waveform from a digital input line. To do this, we supply a clock signal (236 KHz) to the PFI1 Line of our DAQ Board. On each rising edge of the clock, a new bit is set on the digital input DI0.
Our hardware which transmits the data, is triggered through a digital output from our realtime controller. On each edge on this output, the hardware starts a serial transmission of 24-Bits.
Everything works fine except the bad performance of our realtime controller. We want to acquire the 24-Bits in a 1ms timed loop. To measure performance we wrote a test program. In that, we only triggered the hardware and transfered the data to the realtime controller. The task which is doing this job, has a approx. CPU-Load of 30%, which is, in my humble opinion, very high. The task is not waiting for data or anything else! We have earlier implemented a control which is also using a 1ms timed loop. This control is sampling 2 analog input signals, 2 counters. Futhermore it's sending telegrams with CAN and doing many calculations. The strange thing is, this much huger program has a CPU-Load of 25%. Does anybody know where the problem is?
For the better understandig I attached our test-program to this text.
We're using:
PXI-8175 realtime controler
PXI-6221 Multifunction DAQ
Thanks!
Regards,
Crest!
Attachments:
dig_test.zip ‏51 KB

Hello,
First of all 30% CPU-Load is normal because the DAQmx-driver needs a lot of resources.
In your programm you should place a wait (for example with 1ms) into the while-loop which causes
lower CPU-Load.
If this is not enough you should build your vi like in the following example.
Regards,
Christian
Attachments:
Read Dig Port.vi ‏51 KB

PROXY SETTING ERROR - LOADING JAVA APPLET FAILED

I have the most current version of Java (confirmed) installed l.5.0. When I do the Java Virtual Test, I fail at the proxy setting with the red X. I have tried everything recommended at "Configuration Check List" and I have also chatted with microsoft techs who recommended that I register certain .dll's among other things. Nothing has worked. Is the Java Control Panel the same thing as the Java Plug-in Control Panel? I only have the JCP. Could that be the problem? I also get a message in other areas that scripting is not enabled. Is this all related?

Thought I should add this to further explain what is happening ... Hope you can help!
Java Plug-in 1.5.0_06
Using JRE version 1.5.0_06 Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\Compaq_Owner
network: Loading user-defined proxy configuration ...
network: Done.
network: Loading proxy configuration from Internet Explorer ...
network: Done.
network: Loading direct proxy configuration ...
network: Done.
network: Proxy Configuration: No proxy
basic: Cache is enabled
basic: Location: C:\Documents and Settings\Compaq_Owner\Application Data\Sun\Java\Deployment\cache\javapi\v1.0
basic: Maximum size: unlimited
basic: Compression level: 0
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
o: trigger logging
p: reload proxy configuration
q: hide console
r: reload policy configuration
s: dump system and deployment properties
t: dump thread list
v: dump thread stack
x: clear classloader cache
0-5: set trace level to <n>
basic: Registered modality listener
liveconnect: Invoking JS method: document
liveconnect: Invoking JS method: URL
basic: Referencing classloader: sun.plugin.ClassLoaderInfo@f73c1, refcount=1
basic: Added progress listener: sun.plugin.util.GrayBoxPainter@19a0c7c
basic: Loading applet ...
basic: Initializing applet ...
basic: Starting applet ...
network: Connecting http://www.java.com/applet/testvm.class with proxy=DIRECT
network: Connecting http://www.java.com/applet/testvm.class with cookie "JSESSIONID=E4C78C2C09A916295DDBD9EAEE101C10.tomcat4; s_cc=true; s_sq"
basic: Loading http://www.java.com/applet/testvm.class from cache
TestVM 3.1 kc
Copyright (c) 2005 Sun Microsystems, Inc.
All Rights Reserved.
basic: Loaded image: http://www.java.com/en/img/download/t1.gif
basic: Loaded image: http://www.java.com/en/img/download/t2.gif
basic: Loaded image: http://www.java.com/en/img/download/t3.gif
basic: Loaded image: http://www.java.com/en/img/download/t4.gif
basic: Loaded image: http://www.java.com/en/img/download/t5.gif
basic: Loaded image: http://www.java.com/en/img/download/t6.gif
basic: Loaded image: http://www.java.com/en/img/download/t7.gif
network: Connecting http://www.java.com/en/img/download/t1.gif with proxy=DIRECT
network: Connecting http://www.java.com/en/img/download/t1.gif with cookie "JSESSIONID=E4C78C2C09A916295DDBD9EAEE101C10.tomcat4; s_cc=true; s_sq"
basic: Loading http://www.java.com/en/img/download/t1.gif from cache
network: Connecting http://www.java.com/en/img/download/t2.gif with proxy=DIRECT
network: Connecting http://www.java.com/en/img/download/t2.gif with cookie "JSESSIONID=E4C78C2C09A916295DDBD9EAEE101C10.tomcat4; s_cc=true; s_sq"
basic: Loading http://www.java.com/en/img/download/t2.gif from cache
network: Connecting http://www.java.com/en/img/download/t3.gif with proxy=DIRECT
network: Connecting http://www.java.com/en/img/download/t3.gif with cookie "JSESSIONID=E4C78C2C09A916295DDBD9EAEE101C10.tomcat4; s_cc=true; s_sq"
basic: Loading http://www.java.com/en/img/download/t3.gif from cache
network: Connecting http://www.java.com/en/img/download/t4.gif with proxy=DIRECT
network: Connecting http://www.java.com/en/img/download/t4.gif with cookie "JSESSIONID=E4C78C2C09A916295DDBD9EAEE101C10.tomcat4; s_cc=true; s_sq"
basic: Loading http://www.java.com/en/img/download/t4.gif from cache
network: Connecting http://www.java.com/en/img/download/t5.gif with proxy=DIRECT
network: Connecting http://www.java.com/en/img/download/t5.gif with cookie "JSESSIONID=E4C78C2C09A916295DDBD9EAEE101C10.tomcat4; s_cc=true; s_sq"
basic: Loading http://www.java.com/en/img/download/t5.gif from cache
network: Connecting http://www.java.com/en/img/download/t6.gif with proxy=DIRECT
network: Connecting http://www.java.com/en/img/download/t6.gif with cookie "JSESSIONID=E4C78C2C09A916295DDBD9EAEE101C10.tomcat4; s_cc=true; s_sq"
basic: Loading http://www.java.com/en/img/download/t6.gif from cache
network: Connecting http://www.java.com/en/img/download/t7.gif with proxy=DIRECT
network: Connecting http://www.java.com/en/img/download/t7.gif with cookie "JSESSIONID=E4C78C2C09A916295DDBD9EAEE101C10.tomcat4; s_cc=true; s_sq"
basic: Loading http://www.java.com/en/img/download/t7.gif from cache
basic: Stopping applet ...
basic: Removed progress listener: sun.plugin.util.GrayBoxPainter@19a0c7c
basic: Finding information ...
basic: Releasing classloader: sun.plugin.ClassLoaderInfo@f73c1, refcount=0
basic: Caching classloader: sun.plugin.ClassLoaderInfo@f73c1
basic: Current classloader cache size: 1
basic: Done ...
basic: Joining applet thread ...
basic: Destroying applet ...
basic: Disposing applet ...
basic: Quiting applet ...
basic: Joined applet thread ...
basic: Unregistered modality listener
basic: unique id: com_sun_deploy_AboutJava-1.5.0
basic: server port at: 2309
basic: getSingleInstanceFilename: C:\Documents and Settings\Compaq_Owner\Application Data\Sun\Java\Deployment\tmp\si\com_sun_deploy_AboutJava-1.5.0_2309
basic: waiting connection
network: Connecting socket://127.0.0.1:2309 with proxy=DIRECT
basic: recv: javaws.singleinstance.stop
basic: getSingleInstanceFilename: C:\Documents and Settings\Compaq_Owner\Application Data\Sun\Java\Deployment\tmp\si\com_sun_deploy_AboutJava-1.5.0_2309
basic: getSingleInstanceFilename: C:\Documents and Settings\Compaq_Owner\Application Data\Sun\Java\Deployment\tmp\si\com_sun_deploy_AboutJava-1.5.0_2309
basic: removed SingleInstanceFile: C:\Documents and Settings\Compaq_Owner\Application Data\Sun\Java\Deployment\tmp\si\com_sun_deploy_AboutJava-1.5.0_2309
basic: Registered modality listener
liveconnect: Invoking JS method: document
liveconnect: Invoking JS method: URL
basic: Referencing classloader: sun.plugin.ClassLoaderInfo@f73c1, refcount=1
basic: Added progress listener: sun.plugin.util.GrayBoxPainter@1e228bc
basic: Loading applet ...
basic: Initializing applet ...
basic: Starting applet ...
TestVM 3.1 kc
Copyright (c) 2005 Sun Microsystems, Inc.
All Rights Reserved.
basic: Loaded image: http://www.java.com/en/img/download/t1.gif
basic: Loaded image: http://www.java.com/en/img/download/t2.gif
basic: Loaded image: http://www.java.com/en/img/download/t3.gif
basic: Loaded image: http://www.java.com/en/img/download/t4.gif
basic: Loaded image: http://www.java.com/en/img/download/t5.gif
basic: Loaded image: http://www.java.com/en/img/download/t6.gif
basic: Loaded image: http://www.java.com/en/img/download/t7.gif
network: Connecting http://www.java.com/en/img/download/t1.gif with proxy=DIRECT
network: Connecting http://www.java.com/en/img/download/t1.gif with cookie "JSESSIONID=E4C78C2C09A916295DDBD9EAEE101C10.tomcat4; s_cc=true; s_sq"
basic: Loading http://www.java.com/en/img/download/t1.gif from cache
network: Connecting http://www.java.com/en/img/download/t2.gif with proxy=DIRECT
network: Connecting http://www.java.com/en/img/download/t2.gif with cookie "JSESSIONID=E4C78C2C09A916295DDBD9EAEE101C10.tomcat4; s_cc=true; s_sq"
basic: Loading http://www.java.com/en/img/download/t2.gif from cache
network: Connecting http://www.java.com/en/img/download/t3.gif with proxy=DIRECT
network: Connecting http://www.java.com/en/img/download/t3.gif with cookie "JSESSIONID=E4C78C2C09A916295DDBD9EAEE101C10.tomcat4; s_cc=true; s_sq"
basic: Loading http://www.java.com/en/img/download/t3.gif from cache
network: Connecting http://www.java.com/en/img/download/t4.gif with proxy=DIRECT
network: Connecting http://www.java.com/en/img/download/t4.gif with cookie "JSESSIONID=E4C78C2C09A916295DDBD9EAEE101C10.tomcat4; s_cc=true; s_sq"
basic: Loading http://www.java.com/en/img/download/t4.gif from cache
network: Connecting http://www.java.com/en/img/download/t5.gif with proxy=DIRECT
network: Connecting http://www.java.com/en/img/download/t5.gif with cookie "JSESSIONID=E4C78C2C09A916295DDBD9EAEE101C10.tomcat4; s_cc=true; s_sq"
basic: Loading http://www.java.com/en/img/download/t5.gif from cache
network: Connecting http://www.java.com/en/img/download/t6.gif with proxy=DIRECT
network: Connecting http://www.java.com/en/img/download/t6.gif with cookie "JSESSIONID=E4C78C2C09A916295DDBD9EAEE101C10.tomcat4; s_cc=true; s_sq"
basic: Loading http://www.java.com/en/img/download/t6.gif from cache
network: Connecting http://www.java.com/en/img/download/t7.gif with proxy=DIRECT
network: Connecting http://www.java.com/en/img/download/t7.gif with cookie "JSESSIONID=E4C78C2C09A916295DDBD9EAEE101C10.tomcat4; s_cc=true; s_sq"
basic: Loading http://www.java.com/en/img/download/t7.gif from cache
basic: unique id: com_sun_deploy_AboutJava-1.5.0
basic: server port at: 2335
basic: getSingleInstanceFilename: C:\Documents and Settings\Compaq_Owner\Application Data\Sun\Java\Deployment\tmp\si\com_sun_deploy_AboutJava-1.5.0_2335
basic: waiting connection
basic: Modality pushed
network: Connecting socket://127.0.0.1:2335 with proxy=DIRECT
basic: Modality popped
basic: recv: javaws.singleinstance.stop
basic: getSingleInstanceFilename: C:\Documents and Settings\Compaq_Owner\Application Data\Sun\Java\Deployment\tmp\si\com_sun_deploy_AboutJava-1.5.0_2335
basic: getSingleInstanceFilename: C:\Documents and Settings\Compaq_Owner\Application Data\Sun\Java\Deployment\tmp\si\com_sun_deploy_AboutJava-1.5.0_2335
basic: removed SingleInstanceFile: C:\Documents and Settings\Compaq_Owner\Application Data\Sun\Java\Deployment\tmp\si\com_sun_deploy_AboutJava-1.5.0_2335

How to set user friendly URL in ApEx with OHS 11g ?

Hi,
How to set user friendly URL in ApEx with OHS 11g ?
I want change the link http://190.148.xxx.xxx:8080/pls/apex to something like http://xxx.com.
I dont want to use iFrame solution. Please suggest any other method to acheive the same.
Thanks & Regards,
Ranu

Hi all
Iam using apex 4.0 -oracle 11g with OHS on linux os
I need to change my apex url http://x.x.x.x:xxxx/apex to http://x.com
What are the settings i need to do.
If any one knows please share the solution with me
Thanks & In advance

Is it possible to set the performance in Camera Raw, like in PS? I have problems with the performance of the adjustment brush. It is a very bad workflow.

I have problems with the performance of the adjustment brush. It is a very bad workflow.

Had you specified you're on Windows, I wouldn't even have replied. I don't do windows.
Yes, it has been a waste of time for both you and me.
You don't even know how to ask a question properly and you want me to read the FAQs? Hah!
No one will take your word for "ACR latest version", and "PS CC latest VersionVersion [sic]", as many users believe they are fully updated when they are not. Exact version numbers are needed.
8 GB is considered the realistic minimum to run Photoshop CC, but it's far from optimal—on any platform. There are other factors that can be at play and which you don't specify, such as the space available on each of your hard drives, whether you have a physically separate, dedicated hard drive for Photoshop's scratch drive, what video card you have and how much VRAM does it have, what your graphics settings are in Photoshop's Preferences > Performance, etc.
That's why I had indicated a link for you to read:
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
If you read that link in its entirety and provide the pertinent information, maybe some of the Windows experts will be able to help you out.
Now I'm out of here.

Proxy setting? how?

My company uses an outgoing http proxy. I have safari set to use it, but how can I set Software Update to use it? SU always says the Apple SU Server could not be found.

This is Windoz we are talking about. There is no global proxy setting like there is for the Mac. Every program has to handle it themselves.
This is Windows we're talking about so that isn't true. In your Internet Options control panel, go to the Connections tab. You'll see the built-in Windows proxy settings that programs that don't install their own proxy set-up use. You'll see further options if you click the "LAN Settings" button in that tab.
Those are the proxy settings that Safari uses. (You'll find yourself in that control panel tab if you go Edit > Preferences > Advanced and click the "Proxies: Change settings" button.)
iTunes also uses those proxy connections, as per:
http://discussions.apple.com/thread.jspa?threadID=2345214
http://support.apple.com/kb/TS2367
But there's no profit in arguing about matters. I'll leave you in peace. Good luck with the support ticket.

Can anybody post a successful Aggregation Proxy setting?

Hi,
Can anybody post a successful Aggregation Proxy setting?
Every time I visit http://myhostname:8888/aggregationproxy/presenceconsumerws/presenceconsumer, it will prompt to enter a username/ password. But I tried all the posibility, it still didn't work.
Any body can share the idea?
Thanks and regards

Hi Adam,
Thanks for your kindly reply.
I tried to provision XDMS user account following the admin guide. But when I visit http://myhost:8888/aggregationproxy/presenceconsumerws/presenceconsumer with the provisioned account, there will be a "Can not find server "page saying "The page cannot be displayed." Can you share your idea on this point?
Besides, I'm now trying to write presence enabler based on OCMS, to access these presence service endpoint if quite important for me.
Also, I tried to run the example in the doc "ParlayXdeveloper" provided by Oracle,sometimes it's just not able to access the MyPresenceService.jsp page. There are exceptions on the page. There are also "400 Bad request" errors and "URL http://myhost:8888/*****" not available errors on the OCMS console.
I will appreciate any of your suggestions.
Thanks and regards
Yong

Web service proxy client with client cert cause SSLSessionNotFoundErr

Hi,
I tried to run web service proxy client with certification from JDeveloper 10.1.3.0.4 to call PKI enabled web service got folllowing error:
WARNING: Unable to connect to URL: due to java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: javax.net.ssl.SSLException: SSL handshake failed: SSLSessionNotFoundErr
Web service deployed on OAS

Hi,
i am trying to invoke from JDeveloper (10.1.3) a CRM On Demand's Web Service and I hava the same problem:
ADVERTENCIA: Unable to connect to URL: https://secure-ausomxgfa.crmondemand.com/Services/Integration due to java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: javax.net.ssl.SSLException: SSL handshake failed: SSLSessionNotFoundErr
java.rmi.RemoteException: ; nested exception is:
     HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: javax.net.ssl.SSLException: SSL handshake failed: SSLSessionNotFoundErr
     at testerlast.runtime.Contact_Stub.contactInsert(Contact_Stub.java:96)
     at testerlast.ContactClient.contactInsert(ContactClient.java:88)
     at testerlast.ContactClient.main(ContactClient.java:69)
Caused by: HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: javax.net.ssl.SSLException: SSL handshake failed: SSLSessionNotFoundErr
     at oracle.j2ee.ws.common.util.exception.JAXRPCExceptionBase.<init>(JAXRPCExceptionBase.java:93)
     at oracle.j2ee.ws.common.util.exception.JAXRPCExceptionBase.<init>(JAXRPCExceptionBase.java:89)
     at oracle.j2ee.ws.client.ClientTransportException.<init>(ClientTransportException.java:33)
     at oracle.j2ee.ws.client.http.HttpClientTransport.invokeImpl(HttpClientTransport.java:144)
     at oracle.j2ee.ws.client.http.HttpClientTransport.invoke(HttpClientTransport.java:121)
     at oracle.j2ee.ws.client.StreamingSender._sendImpl(StreamingSender.java:169)
     at oracle.j2ee.ws.client.StreamingSender._send(StreamingSender.java:111)
     at testerlast.runtime.Contact_Stub.contactInsert(Contact_Stub.java:80)
     ... 2 more
To do the invocation I have done a proxy to consume this Web Service, with the follow main:
public static void main(String[] args) {
try {
testerlast.ContactClient myPort = new testerlast.ContactClient();
System.out.println("calling " + myPort.getEndpoint());
myPort.setUsername(nameUser);
myPort.setPassword(password);
ListOfContactData llista = new ListOfContactData();
ContactData[] contacts=new ContactData[2];
ContactData contact=new ContactData();
ContactInsert_Input input=new ContactInsert_Input();
// Login WS HTTPS
String idSesion=connexioWS_CRM.logon(URL,nameUser,password);
// Add contact
for (int i = 0; i < contacts.length; i++) {
contact.setId("ProvaWSCRM"+i);
contact.setContactFirstName("JDeveloper"+i);
contact.setContactLastName("prove"+i);
contact.setCellularPhone("77777777"+i);
contact.setDescription("Add contact with Id:"+contact.getId());
contacts=contact;
System.out.println("Id:"+contacts[i].getId()+" firstName:"+contacts[i].getContactFirstName()+" lastName:"+contacts[i].getContactLastName());
llista.setContact(contacts);
input.setListOfContact(llista);
input.setEcho("off");
System.out.println("Pwd:"+myPort.getPassword()+" Port:"+myPort._port+" endpoint:"+myPort.getEndpoint()+" user:"+myPort.getUsername());
myPort.contactInsert(llista,"LIC","Broadset","OFF");
// Logout en WS (HTTPS)
connexioWS_CRM.logoff(URL, idSesion);
} catch (Exception ex) {
ex.printStackTrace();
What's wrong? Any idea?
Thank you
Edited by: user12085357 on 31-oct-2009 10:39

ITunes is no longer syncing to Apple TV. I have been using my Apple TV Gen 1 for 3 years with good success. For reasons unknown to me, iTunes no longer syncs with my Apple TV. It says/looks like it's syncing but never gets through the first song.

iTunes sees the Apple TV as a device. I have it set to manual sync. I have it set to sync my entire library (I have only 10 CDs in my library). It says it is syncing. The wheel goes round and round. The song it is syncing is listed. The number of songs that are to by synced is listed. but it never gets through syncing the song. I have also set it to sync my photos, but never gets to them. I seem to have a good wireless connection to my Apple TV. I am able to talk between my PC and my Apple TV, but now it won't sync. Note: I have been playing music on my Apple TV for 3 years with good success (with hundreds of songs), but it no longer seems to work like it did. Thanks.

Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.

HP Officejet pro 8500 won't print and keeps asking for a proxy setting. Help.

HP Officejet pro 8500 won't print and keeps asking for a proxy setting. Help.

Hi,
Can you confirm that you have an Officejet 8500a or Officejet 8500? On the 8500a model, you can set the networks proxy address and port setting from the front panel of the printer (setup>Webservices setup>proxy). If you are unsure what your proxy settings are you'll need to contact your network admin. If your network uses a proxy users name and password for all devices, you need to enter this information along with the proxy address and port in the printers embedded web server. Type the products IP address into an internet brownser window (printer must be connected to the same network as PC). Select the network tab, and than look for the proxy settings option. Enter in the information and click apply. Once the networks proxy information has been correctly inputed into the embedded web server, try printing again. If unsuccessfully, you might try reinstalling the printer software after uninstalling it. Hope this helps!
I was an HP employee
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may select the "Kudos" button on any helpful post to give that person a quick thanks.

Sales Return: credit memo Should generate automatically with goods reversal

DEAR SD GURUS N EXPERTS,
Currently we are using following system of Sales return.
VA01: (Order Type: RE) --> VL01N (Return Delivery) --> VL09 (Goods Reversal) --> VA01 (Request 4 Credit Memo or remove billing bloc) --> VF01 (Credit Memo)
But, now my client want a such configuration that entry of Credit memo should happen along with Goods Reversal (VL09) - Automatically. They don't want to carry out VF01 separately.
Reason behind it: Customers has credit Limit, Suppose a customer has a Credit limit of 5,00,000 and we have delivered the Material of same amount. It means all the credit limit has been used. But now He has returned the material of 2,00,000. But it will not affect the credit limit until we pass Credit memo.
Please suggest the required configuration and what we can do in such scenario. Thanks in Advance.
DSC

Again I can tell you that the process what you were following (reversing the goods receipt) is totally wrong and it will have a serious negative impact on inventory. Either you should not create a return delivery or take the stocks into parent plant. If you dont want to show in inventory, then scrap it which is a standard process.
Coming to the requirement, there is no standard way to achieve this. Check these threads where the same topic was discussed
[Re: How to set up in SAP to have automatic billing after PGI |Re: How to set up in SAP to have automatic billing after PGI]
[automatic billing|automatic billing]
You have to apply the same logic for credit note also.
thanks
G. Lakshmipathi

ITunes not using the defined proxy setting

iTunes 10.0.1 on MacOS X 10.6.4 isn't correctly using the system
proxy setting defined through:<pre>System Preferences…
Network
Advanced…
Proxies
Web proxy (HTTP)
Web Proxy Server
myproxy.my_company.mycountry : 3128</pre>
For example, when selecting:<pre>Advanced
Get Track Names</pre>
a network analysis shows that the machine is trying to
connect directly to:<pre> service.gracenote.com</pre>
with plain: http
where it should use port 3128 as defined.
This misbehaviour is causing an infinite loop, a "death" loop.
This death loop may sometimes end in a newly inserted CD not being
recognised by iTunes and the Finder.
Before submitting this as a bug to Apple, I wanted to check if I'm
not the bug.
Did I miss something really easy in the iTunes
setting to avoid this misbehaviour leading to death loops?
<pre>--------
don't look for my Macs models in my signature, this would be uggly... and irrelevant
dan</pre>

daniel Azuelos wrote:
iTunes 10.0.1 on MacOS X 10.6.4 isn't correctly using the system
proxy setting defined through:
Before submitting this as a bug to Apple, I wanted to check if I'm
not the bug.
Did I miss something really easy in the iTunes
setting to avoid this misbehaviour leading to death loops?
No need to fill a bug report .
It was magically repared with the 10.1 upgrade.
Question answered through action. Great.
<pre>--------
don't look for my Macs models in my signature, this would be uggly... and irrelevant
dan</pre>

FF 6.0.2 on Windows XP will not keep "no proxy setting", have reset manually many times

FF 6.0.2 keeps reseting to manual proxy setting. Windows XP system. Have reset to "no Proxy" many times but it resets to manual when I close browser.

Same thing happens with JDK 1.7u45

URL Proxy setting with good performance

Similar Messages

Maybe you are looking for