USB Drives - Problem with Recovery Manager

I bought a Kingston DataTraveler 112 16GB thumb drive so I could copy the recovery image as a backup. It recognized the thumb drive and showed that the recovery image was a little over 11GB. But when it started to format the USB, it returned to the previous screen and no longer showed the drive there. At the bottom of the screen it said to contact HP Support but it didn't give me an error message. Now when I try the recovery manager it won't recognize the USB at all.
Prior to that I had purchased another 16GB USB--don't remember which brand. I have 5 other USB drives, but they're all smaller, except a 32GB Kingston DT101 G2 which does not work on this computer, although it worked on my previous computer (Pavilion w/Vista Home Premium) with no problem. All these USBs, including the new Kingston are for USB 2.0.
OS is Windows 8.1 64 bit on HP Pavilion 500-A60 desktop. I've tried the problem USB drives in all 4 ports (2.0 and 3.0). Also in the one I plug into a port to give me 3 USB ports, also used on my prior computer.
Is it possible that this computer doesn't recognize Kingston or certain other brands of USB thumb drives?
This question was solved.
View Solution.

The trick to this is to use a USB 2.0 port and to use a non-Windows 8 certified thumbdrive. If the USB flash drive shows as a "removable device" then there should be no issue in using the media to create recovery media
I have had great success with a Transcend USB 3.0 16-GB flash disk.
I own a couple of DataTraveler flash disks and had the same lack of success creating recovery media that you did. I have also had zero success with Sandisk Extreme usb 3.0 flash disks
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Similar Messages

[SOLVED!] On USB drives, problems with non-English chars and HAL

Hello,
I am having a problem with non-English caracters (áãàçéẽê...) on files stored on my USB drive.
On Windows they're created with the correct name. But on Linux the files have the non-English characteres replaced by '?' and are not accessible.
If I manuallly mount the drives using 'mount -o iocharset=utf8 /dev/sdb1 /media/usbdisk' the characters are OK, so I think I just need to get HAL to pass the correct parameters to mount. However I don't know how to do that, and haven't found any good solution.
I tried to build a custom kernel setting the default charset as UTF-8 and it didn't work.
Any ideas? I'm using x86-64, HAL 0.5.13-3 and my locale is pt-BR.UTF-8.
Thanks!
EDIT: Actually, this is not a HAL problem, but a problem with 'exo'. For the solution, I edited /etc/xdg/xfce4/mount.rc and added iocharset=utf8 to the [vfat] category.
Last edited by Renan Birck (2009-11-28 20:54:23)

I don't use Thunar presently, but I looked in the Thunar Volume Manager doc and I didn't find anything to change the mount options of removable drives. I am not quite sure if it's possible or not. Maybe someone using it can tell for sure.
But if it is not possible to change the mount options, a possible solution is to disable the Thunar Volume Manager plugin and to use something else more configurable to manage the automount function.
Personally I use the halevt package from AUR which uses configuration files in the xml format.
It's not so easy to use but is highly configurable.
But there exists other tools also.
I can help you with halevt if you choose that way...

Urgent problem with Recovery Manager's File backup operation: No storage device detected

I have a Pavilion g7-1070us laptop that failed to start and simply displays a blue-screen with a blinking cursor (no error message).
I could NOT get into safe-mode by hitting F8, but was able to activate the “HP recovery manager” by hitting F11.
I was trying to back-up my files before triggering the system restore. It asked me what types of files to back-up, then scanned the computer for these files and was finalizing the files for back-up; then suddenly an error message showed up saying something like "No storage device detected. Make sure the removable disc drive is connected to computer". But I have both a blank DVD sitting in the optical drive and a USB drive attached!!!!!!
I was expecting the system to ask me where to save these backed-up files but no such question was asked and this nonsense error message appeared out of nowhere. Apparently the recovery manager couldn't see my DVD or USB drive?
Can someone throw me a life-saver here? If I cannot recover my files, I cannot proceed with the system restore and I am forever stuck here!!!!!!
Please help!!!! Much appreciated!!
This question was solved.
View Solution.

The blinking cursor means the system is attempting to load Windows, but is unable to read the boot files. There are a number of causes including hardware issues. Run the tests as before to ensure the hardware is functional. I would have to run through the software repair steps only to find it is a hardware issue. Hard drives is perhaps the most common component to have issues regardless of the manufacturer.
I suspect the hard drive will pass the test and will go ahead and link to DavidPK's posts in this thread as they have the best chance to resolve the issue without losing and restoring everything. I do recommend this step at this point since two recoveries did not resolve the issue. DavidPK's solution comes in two parts, so be sure to follow both starting with the first post and moving to the second post should the first one not do the trick.
Let me know how this goes.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Problems with recovery manager

Hi i am new to this forum and didn't have abit of idea whats going on with my HP mini 110- 1135TU using windows 7 starter.
I performed 2-3 times of the recovery from the recovery partition and everytime it fails me just auto-restarted during the process.
then upon the 3rd tries, from then on i was not able to enter again to the recovery manager interface.
it still boot normally, but whenever i key in my password and a few seconds later, it will say windows could not complete the installation. To install windows on this computer, restart the installation.
I have no way to access windows
Didn't know whats going on, really appreciates if someone could help me with this.

Hi,
If you have created your USB Recovery, use this to perform the reinstallation.
If you don't have this, you can order a replacement Recovery USB Kit using the link below and use this to reinstall Windows.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00810334&cc=us&lc=en&dlc=en
If you have any problem with this link, order them directly from HP - make sure to specify that you require the USB Recovery Kit.
If you live in the US, contact HP Here.
If you are in another part of the world, start Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Replaced failed HDD Sat. L455-5000 with new Western Digital 320 SATA drive-problems with recovery

Original HDD died. Replaced it with new WD 320 SATA from Best Buy-nice drive-good reviews. Used Recovery Center DVD's I had burned earlier. Three with Toshiba Recovery 2 with Windows Recovery Envrinoment and DRivers/Apps.
Toshiba REcovery only asked for first 3. Computer restart after Recovery Install(First Three Disks) gives error message:
File: \windows\system32\DRIVERS\LPCFilter.sys
Status: 0xc0000428
WIndows Cannot Verify Digital Driver Signature.
Windows Boot Manager "screen" always comes up and Windows fails to start.
1.Asking for a windows installation disk-thought this was given in Toshiba Recovery DVD's I burned.
2. Chosse language settings-click next
3. CLick " repair your computer."
I thought the Toshiba Recovery Disks were supposed to install everything for me. I don't have a sparate windows system disk. Never burned one
Any help woud be great.
Thanks,
Charles

Time for some good news.
I received and installed an OEM WD 250 (Toshiba) replacement drive. After loading the recovery disks this morning-it worked perfectly-just like "out of the box."
It was the HDD failure after all. No software gliches at all. Windows update of course is attempting to re-load about 500 updates. LOL. I also learned to spread them out in groups of 10-20 long ago as well. This will take some time; but the laptop is running fine.
So I learned some great lessons. 1)-stick with OEM replacement hardware-computers are "locked in time" to a definite hardware configuration that works well at that time in history. 2) If I had not used my own "decision" tree to problem solve-I'd still have a dead computer. 3) I was correct to order an external drive enclosure to test the bad drive after I was unable to do so with the laptop. 4)I made the right choices to contact the Western Digital Drive support to find out the new drive really might also be the problem. 5) It was also great to be able to get such amazing help on this forum too-what a great resource for Toshiba owners. 6)Finally-I was able to "chat" with the Toshiba Rep. online to confirm the OEM part number of the WD drive they had used-and ordered -cheaper- from Amazon.com.
7) After 2 weeks of my own time(and great online resources) and $80.00-I fixed my laptop myself. Never had to mail it anywhere.
8) I also ended up with a great external backup drive-that I was always too lazy-and cheap-to order for myself before. LOL.
9) Now what about the Toshiba OEM Graphics card that the "Windows Experience Survey' always says I need to replace? Nope -not going there -yet.
Thanks for all the help-
Sincerely,
Charles

I have a problem with session manager session files because of the invalid json storage data submited by firefox

Hi, i have problem with session manager's session files. The problem is: the submitted storage data from firefox which is put between "storage":{ and its matching closing brace } But in some of my session files there is non equal { and } under storage's braces. I need to get storage data but in my case it is very hard to do. My question is there any char put before or after { and } like /{ or \{ to avoid confusion? If there is not such thing, i think there could be different solution but i am not sure: i look couple of my session files; after "storage":{...} there is ,_"formDataSaved" so i can get storage data in this example ... by looking between "storage":{ and ,"_formDataSaved" easily. Is there every time ,"_formDataSaved" after "storage":{ ? Thank you.

Well, it seems waiting is not my strong suit..! I renamed a javascript file called recovery to sessionstore. This file was in the folder sessionstore-backups I had copied from mozilla 3 days ago, when my tabs were still in place. I replaced the sessionstore in mozilla's default folder with the renamed file and then started mozilla. And the tabs reappeared as they were 3 days ago!
So there goes the tab problem. But again when I started mozilla the window saying "a script has stopped responding" appeared, this time the script being: chrome//browser/contenttabbrowser.xml2542
If someone knows how to fix this and make firefox launch normally, please reply! Thank you

MOVED: Driver problems with Windows Professional XP 64bit Edition

This topic has been moved to Operating Systems.
Driver problems with Windows Professional XP 64bit Edition

Well, after looking around the forum here I found an answer that works! I wish I could remember who to give credit too though. I installed the latest Vista drivers and I got static all the time. I tried another members suggestion of disabling the X-Fi device in the Device manager every time I log off and then enable the X-Fi the next time I log in. I have great sound as long as I do that. Also, for connecting to a home system I am using the DTS-60, $00 on this website, but it works well if you havea DTS decoder. I am using the X-Fi extreme Music edition. Good Luck, hopefully another driver is on the way.

Hard drive problem with HP Pavillion dv7-4180us

Hard drive problem with my HP Pavillion dv7-4180us. Using Windows 7.
Boots up sometimes and very slow.
Appreciate any help.

Have you booted into the BIOS or Diagnostics Tool to run the Hard Drive Test?

Logon problem with oracle management server

I have problem with Oracle Management Server when I connect to the OMS message comes
The exception (java.lang.NullPointerException) occurred.
if any body have any idea pls tell us

Hi,
Oracle has changed the Enterprise Manager from version 1.5 to 2.0 .
With the new Oracle8i dataase server another service has been added.
If you want to user the OEM you have to install The Managment Server.
The Managment server has its own user and privileges and is recommended when using OEM.

Problem with discovering Managed Servers

Hi,
I got problem with discovering managed servers, when I restart only administration
server while managed servers are running. During restart of admin server everything
seems to be ok (the directive: Starting discovery of managed server... appears
on the screen).
However when I start admin console through http, I cannot monitor performance,
browse logs etc. I can only shutdown managed server and I can see in a server
tag that particular managed servers are running.
I'm looking forward for any clues
Michal

Sorry,
i cannot stop those managed server - in Control tab I have active only option
to start those server but they are running. In logging tab when I want to browse
the log the message that probably this server is not running appear. However in
the tab when all servers are listened there is a message that they are running
"Michal" <[email protected]> wrote:
>
Hi,
I got problem with discovering managed servers, when I restart only administration
server while managed servers are running. During restart of admin server
everything
seems to be ok (the directive: Starting discovery of managed server...
appears
on the screen).
However when I start admin console through http, I cannot monitor performance,
browse logs etc. I can only shutdown managed server and I can see in
a server
tag that particular managed servers are running.
I'm looking forward for any clues
Michal

Hi..i want to format only c drive using hp recovery manager.

My notebook belongs to Presario V3000 series and has Vista OS.
I want to format only C drive without lsing data on other drives, using HP recovery manager.
Please let me know which option to choose under Advanced Options in HP recovery manager.

Recovery manager has changed over the years, what options are available?

Replaced hard drive and used Recovery Manager via USB but now I don't have a D:recovery partition.

I replaced my bad hard drive on my G62 Notebook and used HP Recovery Manager on a USB stick. Afterwords I restored from a back up but couldn't restore the D:recovery portion because the new hard drive doesn't have this partition. How can I create this now and restore the recovery partion now?

Hi,
When you reinstall the operating system using the USB recovery stick, it should create by default a recovery partation Drive D. Since you wont be able to create the partation manually. So if the HDD which you had replaced is not matching with the exact HDD which was shipped in the system, then it would have caused the issue. So try reinstalling the OS again.
"I work for HP."
Please click the "White Kudos" star to say thanks for helping.
Please mark "Accept As Solution" if my help has solved your problem.

Hard drive replacement with recovery disc problems - Windows Troubleshooter Error 0x8E5E0247

I have a 2009 Satellite A505 laptop
64-bit Operating System with Windows 7 Home Premium, 4 gigs of RAM, and Intel Duo CPU, 2.20GHz
The original Toshiba 500 GB Hard drive finally gave up the ghost and I replaced it yesterday with a WD Scorpio Blue HD Model WDBABC500ANC-NRSN (SATA 8 MB :Mo Cache 5400 RPM)
Easy, straight forward replacement. No problems.
I got out my Recovery Discs which I created using the Toshiba recovery disc utility back in 2009. As I remember, at the time, the process of creating these discs was easy, and it was the first thing I did after registering my computer.
The process created 5 discs, which the last, number 5, is the Applications and Drivers. I have done this process before on other computers (Gateway and Toshiba) and it is usually pretty straight forward and problem free.
Not so this time, and have to wonder about the Toshiba Recovery Discs that were created! Why aren't these working correctly?
I followed the normal process to boot the new Hard Disc on the DVD Recovery Disc 1, and everything seemed to work normally. I followed every "next" prompt, and installed each new Disc 2, and 3 as prompted.
After Disc 3, it said it was finished, and then went throught the Toshiba unpacking and the Windows installation process with multiple re-starts and Window start ups. Again, everything seemed normal, except I wondered why I never received a prompt for Dsc 4 which was unused in the recovery process. Is that normal?
During the Toshiba automatic unpacking and installation process, where various drivers were being installed, Windows errors began returning that said something like this, "Windows requires a digitally Signed driver, and the driver is unavailalbe and could not be activated in Windows 7 . Programs relying on them may not work. "
The problem drivers included the Realtek RTL8191 SE Wireless Lan 802.11n PCWE, the Richo pcle memory stick, Realtek High Definition Audio, Video Controller, Richo PCLe SD/MMC Host Conroller. and a few others....
I did not touch the keybroad or intervere in anyway, and let the installation process proceed until everything was installed. I then went through the first Windows start up process where you set the region, time and create the USER ID, set the adminstrator rights and even got the Toshiba Registration prompt.
When finished, I noticed that the sound was not working, nor was the Wireless Network Connection, and when I attempted the usual Windows network Trouble Shooting process, it returned a Windows Error which said "A problem is preventing the troubleshooter from starting"
I then viewed the error details. They said...
Package ID: Unknown
Path: C:\windows\diagnostics\system\networking
Error Code: 0x8E5E0247
USER: mvh-PC\mvh
Context: Restricted
I then went to MS Windows 7 Troubleshooting forum on the internet using another computer.
I followed all the 'cmd' processes for "supposedly" solving these problems by running System File Checker [SFC] scan on the computer which was supposed to replace the missing or corrupt files.
Well, no joy. The issue presists.
After some problems accessing the CBS log, I was able to view it, and it provides no useful information as to why the errors where unable to be corrected.
I tried following everything on this MS How to Use File Checker document:
In my CBS file I got a lot of SQM "Failed to start" and "Failed to read" and "Failed to upload" and CSI "Repair results created"....
but did not get any "Cannot repair member file" type of messages to use the 'cmd'
takeown /f Path_And_File_Name function
I then started over. Rebooted the computer again, starting with Recovery Disc 1 and several hours later was back to the same problem. Geeze
I have checked all the various Device drivers that are shown as not working in the Device Manager. I have tried uninstalling them all, and then re-installing them both automatically during Windows 7 start up, and also from the Recovery Disc 5 which had the original drivers. Nothing works.
When I clicked on "Connect to the Internet" on the Windows Control Panel, I am returned a prompt that says "Windows did not detect any networking hardware" and so,even with a direct Ethernet connection to my cable modum, I was unable to download any Windows updates or new drivers to see if that fixes anything.
I am stumped.
Any suggestions out there? I don't want to waste a lot of money paying for more technical help for an aging laptob. If this is beyond a simple fix, then I think I will just go and buy a new cheap computer from Asus having wasted the ~$70 bucks for the hard drive for this one.
It shouldn't be this hard, should it?
I have considered buying new recovery discs directlly from Toshiba, but if the process that came with the computer can't create correct discs that work the first time, what promise do I have that another $29.95 won't just be a waste of money too?
Thanks for any helpful hints about what I may be missing or overlooking.
Regards
Marvin Van Horn
Solved!
Go to Solution.

Jerry...
I think we can close this one out as 95% solved. I did get the Intel (R) Rapid Storage Technology loaded after installing the Intel (R) Chipset Software Installation Utility. The instrustions were not the simpliest for the novice, and it took me a while to figure out if my system was running in RAID or ACHI mode. I decided that it was ACHI, so could proceed, even though I did NOT find this information in the Device Manager where they said I should have...
Also, it was a little confusing on the Intel site which file to download. I first did the zip file, (f6flpy-x64.zip) but could not figure how to execute it or put it on a disc, so downloaded the (iata_enu.exe) and hope it was the right one for a 64 bit system.
Anyway, I am now connected via Ethernet cable to my modem, and down loading 126 Windows Updates which should take a while.
My only other issue, that I am aware of is that I do not seem to have any Wireless Lan software, and even though I have added Lan drivers via the recovery Disc, they do not show up anywhere.. Will have to figure out what is going on here, and why it isn't working...
Maybe it is related to something in the Device Manager called
"Other Devices" Under that I have 4 items not working. They are listed like this...
Base System Drive,
Base System Drive (a duplicate?)
Network Controller
Video Controller.
I have tried uninstalling them, and allowing Windows to reinstall, but they still are not activated. Not sure what this is for, and how to update it, but will search some more on another forum thread for these issues. Maybe I will try again after all my Windows updates are done and see what happens.
Thanks again for your help. If you have any other insights on the Wireless issue, that would be great. It is turned on, but in the Windows tray, I only get the Ethenet Icon option, and it does not see or present wireless connection options like before. I am sure this is something simple.
cheers
mvh

Manage USB drives / removal with VMWare Workstation in Unity mode

We have a peice of legacy software that only runs on windows XP. Our deployment has it running on VMware Workstation in Unity mode. A constant issue is USB drives. The users need to connect USB drives to the legacy app.
The way i'ts currently managed: the drives are set to auto-mount into VMWare with the VID and PID of the drives. Then a DriveRemove.exe utility bat file is setup to eject the drives, and a shortcut is placed on the users desktop. Is there a better way to do this?
This topic first appeared in the Spiceworks Community

Really disappointed in Apple after this!
I've had my iPhone 4S still on iOS5, and wanted to update to iOS6 today. I tried over the air, but it kept failing and suggesting that I try it with iTunes. My iPhone hasn't been connected to iTunes for months, so I first had to update, which makes updating already quite annoying as it doesn't work as intended.
After updating my iTunes, it found my iPhone and I hit Update. After some time it just stopped and failed on me, my iPhone went into recovery mode. After reconnecting to iTunes I get the message; "Your iPhone is in recovery mode, please recover" with a "OK" button. I hit that button and the Update/Restore screen disappears.
Luckily I found the log files in my User data folder and were able to figure out the error number, but for a normal user this would be a point they would give up! My next smartphone might not be an iPhone, the hardware and the experience is great on an iPhone. But updating/settings/app-management and iTunes just suck!

Nano with windows USB Driver problem?

Everything worked fine with my nano for a few days.
I've gone through all the troubleshooting tips for the nano itself. (3 Rs, etc).
Latest,I have deleted the USB device and reboot the computer. Windows recognizes new hardware found and tries to install the driver for it.
I get the following error:
Error: The initialization failed because a function driver was not specified for this device instance.
Seem to me to be a problem with the Ipod Nano software since windows is recognizing it. I have used other usb devices with this port in the past though I am not using any with it currently.

Taking it back for an exchange is probably your best bet then, but there is one more thing you might try first. Some people have found that by putting the iPod in disk mode, it keeps the USB port alive and lets it charge. It doesn't sound quite like your situation, but it migh be worth a try. Or, you could even take it to a different computer and plug it in there for three or four hours to see if it will take a charge. You don't need iTunes on that computer. But if those don't work, then the exchange is probably your best bet at this point.

USB Drives - Problem with Recovery Manager

Similar Messages

Maybe you are looking for