Usb not recognized, usb not recognized
Just got a new Gateway windows 7 laptop. Itunes is loaded but when I plug in usb cable it says it is not recognized?
You mean your idevice not being recognized?
Refer to this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Similar Messages
-
USB Device for IPOD not recognized by Windows, whether ipod connected or no
During the past few days I have received a pop up error message from (I would think) Windows that the USB device is not recognized. I have the USB plug for the ipod connected (as always)but the ipod isn't even connected. It keeps popping up like every few seconds that the usb device is not recognized.
When I attach the ipod itself, the ipod is recognizing it because it powers up. But, it took 10 times just to get the ipod to recognize through itunes. It updated, then immediately upon completion, windows again starting giving repeated error messages that the usb device wasn't recognized.
I have downloaded the newest itunes but I had it on my system for 4 days with no problems whatsoever. I don't think that's it. No other system changes.
I've deleted my temp files and cache. Also did a "disk clean up" and "defrag." It's still doing it.
Any suggestions?I'm having the same problem. Ever since I upgraded to version 7, iTunes & my PC no longer recognise my iPod, and it therefore won't sync.
It's not the USB port (other devices work in it), I rebooted my iPod and re-installed iTunes, I've tried stopping and starting the iPod Service (but can't see my iPod in My Computer). When I run the Diagnostics it says iPod connection failed. I've even bought a new USB cable but that doesn't work either.
This is driving me up the wall. Is there a glitch with iTunes 7?
Can anyone help me out?? Thanks
Windows XP -
1GB 1st Generation iPod Nano USB Device Not Recognized on any computer
I just recently received a free 1st generation 1GB iPod nano from a friend because they couldn't get it to work. I figured I'd take a crack at it and hopefully get a working, free iPod out of the deal...
It already had music loaded on it (mostly a bunch of garbage), so like anyone else in my position I proceeded to reformat the little sucker and wipe its slate clean.
Here is what happens when I try to connect the nano to ANY computer:
Here is how the nano shows up in device manager:
This was the original problem I was having with my desktop PC which is running Windows XP Home with SP2 and all the latest Windows updates. It is running iTunes 7.5.0.20, w/ latest iPod updater software version 1.2.3.
Prior to testing the 1st gen. 1GB iPod nano, I had been charging and syncing my 5th generation 60GB iPod classic on my desktop PC using the same exact cable. All of my USB ports are in working, functional condition and order. I even have “Allow the computer to turn off this device to save power” unchecked under USB Root Hub Properties.
I tried a couple different USB ports and I used another cable, no luck. So I moved on to my Fujitsu laptop running Windows Media Center Edition, all latest Windows updates, same version of iTunes and iPod software (the difference being that I DO NOT sync any iPods to it, nor do I have any music on it). SAME EXACT PROBLEM, same message bubble, same entry in device manager, and same lack of driver availability.
Thinking maybe it’s just a “PeeCee” thing I dug out my old PowerBook G4 running the ancient Mac OS 10.2. Keep in mind this thing only has a 400 MHz G4 processor, 512MB RAM, 30GB hardrive, and USB 1.1 ports. The iPod nano wouldn’t even give a hint that it existed when I plugged it in.
I have tried every single little Apple trick available. I’ve done the forced restart while connected and while not connected to the computer. I’ve done forced disk mode while connected and while not. I’ve run iTunes diagnostic tests on connected devices. I’ve messed with USB port settings. I’ve tried two different USB 2.0 iPod cables. I tested my dad’s 8GB 2nd generation iPod nano to see if it linked up with my desktop and my laptop IT DOES. I even tried my 60GB 5th gen iPod classic OVER AGAIN to see if it still worked, IT DOES.
Also, this 1st gen iPod nano will not charge when hooked to the computer through USB. When I plug it in, between the time it’s plugged in and when the “USB device recognized” bubble pops up the battery icon shows it is charging, but as soon as that bubble pops up it disappears and discontinues pretending to charge.
On my Fujitsu laptop, I uninstalled everything having to do with Apple. I uninstalled iTunes, Apple Software Update, everything. Restarting after it all of course. Then I installed the old iPod Software Updater from 6-28-2006. I was pretty sure this wouldn’t work because the iPod isn’t even recognized by the computer. In order for the iPod to work in the iPod Software Updater or iTunes it has to first be recognized at the basic Windows level. Which it isn’t…
I have done research all across the net and the only real answer I found was that the iPod Nano’s internal USB controller is dead. I’m 99% sure it has nothing to do with my laptop, desktop, USB cables, software, or drivers. What do you guys think?Nope I have not figured anything out since I posted this. The closest answer I've found is that it's the internal USB controller which has gone bad. If that's the case than there is really nothing more I can do.
I did find one opening and that was the diagnostic screen. You get to it by holding down the Menu and Center buttons, as soon as the iPod resets hold down the Left and Center buttons, the iPod will beep and then it will go to a diagnostic screen. Maybe somewhere in there you can find the problem I don't know how to use it though. -
USB Device not recognized by windows
When I first plugged my iPod into my computer, it went through the whole recognizing new hardware thing. Installed the drivers, then said that the new device was ready to use. But then I get a message that says "Device malfunction, device not recognized by windows" or something to that effect. I only have 3 days to return this iPod...anyone have any ideas? Thanks.
I'm not very familiar with the Windows OS but try this tip I picked on the forum up a while back, hopefully it might help.
1. On the Start menu, click Control Panel.
2. Double-click the System icon.
3. Click the Hardware tab.
4. Click Device Manager.
5. Scroll down the list of devices to the Universal Serial Bus controllers
6. Click the plus icon next to the Universal Serial Bus controllers.
7. Double-click one of the indented USB Root Hub entries.
8. Click the Power Management tab.
9. Deselect the "Allow the computer to turn off this device to save power" option.
10. Click the OK button at the bottom of the window.
11. Restart the computer. -
The guy at the Apple store said "Now thats a Brick" "I've never seen or heard of one this bad!"
I bought the phone with little to no info on it. I was told that it froze after several failed attempts at loading IOS 6.
Now... It will only turn on if plugged into wall, it will show black, then apple, then "connect to itunes" screen and thats it. As soon as I unplug, it dies. If I try power off, it turns back on and freezes in same place. Reset, same. And unabale to Factory restore cuz I cant unplug from wall. Im asuming its in dfu, nothing works.
When connected to USB,no power, no response from pc (win xp) or Itunes. Although... I swear I heard pc beap once as though it "found new hardware" but on inspection, Nothing.
My theories: 1) Battery is hooped. ( but I was told it worked fine a month ago) The longest I have had it charging is 4hrs and i died as soon as removed.
2) VCC conductor. Would explain USB issue.
3) The phone was "jailbroke" and IOS6 did not like that. Isnt there programs to reverse this?
4) IOS6 interupted, then phone got factory restored. Is it possible there is No "OS" on it?
I never touched an Iphone untill 2 days ago, and I have read and tried every troubshooting solution I could find. If I can fix this I'll be an expert!
Any help appreciated.Hello, chipperp.
Thank you for visiting Apple Support Communities.
Start with the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
If the issue persists, try the troubleshooting steps in the first article below. If you received a specific error number when restoring, see the section labeled Get more help in the second article below.
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/ts1275
Cheers,
Jason H. -
USB HDD not ejected properly...no longer recognized by Airport Extreme
I'm hoping someone can help. I'm quite desperate as all of my DVDs are on this drive.
I have a 2 TB WD USB harddrive that I connect to my airport extreme to use as my iTunes storage. Up until 2 days ago there have never been any issues. I was messing around, cleaning up around the router and hard drive and the USB cable was pulled out of the harddrive. Now when I plug the USB cable back into the drive, it is not recognized in the Airport Utility. I installed an older version of Airport Utility and it shows the volume, but I cannot do anything with it. It is also not recognized in finder. If I plug the drive directly into my MBP, it mounts fine and is totally accessible. What could have meesed up with the drive? I have another 1TB drive that I tried and this is recognizable in Airport Utility and finder along with a USB stick I have laying around. It is only the drive that has all my stuff on that is no longer usable.
If anyone has any suggestions I would be very greatful.
For what it's worth, I've tried everything I can find on here and the web short of reformatting the entire drive. I can't do this as I'll lose all my "stuff".
Thanks in advance.
MarcThis is a user to user discussion area. So it is unpredictable as to when someone with a suggestion will respond to your post. An hour in the middle of a work day isn't a long time.
Since the card is recognized, there isn't anything wrong with that side of the card. If the card isn't receiving a signal, either the RF side of the card has failed, the antenna wire isn't connected properly, or the antenna in the PowerBook has failed. -
IPod is not recognized by my computer's usb port and itunes
Remove my ipod from the computer without ejecting it and now the ipod want turn on, it is not being recognized by my computer's usb port or itune. I have reinstalled itune and still have the same problems.
1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
3. Check the USB cable
4. Verify that Apple Mobile Device Support is installed
5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job.
7. Check for third-party software conflicts. -
IPhone 4 not recognized when connected to new USB 2.0 card
I have an iphone 4 OS4.1 on a no-name Windows XP Pro (service pack 3) PC with an AMD processor and lots of RAM.
I had the phone working and syncing beautifully with the onboard USB 1.1 but it was slow. So I bought a new PCI USB 2.0 card and installed it. Card is installed and there are no problems according to the status in System Devices.
But the computer does not recognize the iphone when plugged into one of those ports. If I plug it into one of the USB 1.1 ports that are still in the machine, it syncs and works fine. If I plug it into one of the new USB 2.0 ports, the PC shows the window at bottom right saying the device is not recognized. Tried the wizard but it's useless.
THOUGHTS?????Nevermind!!!
It turned out to be a faulty cable! I tried it with a different sync cable and it works fine!
So disregard the question above. -
Operating system: Windows Vista
Error: USB Device not recognized
While actively on the computer, we suddenly got a message stating that the USB Device was not recognized. The only thing plugged in to the USB port was a mouse. Tried all the ports, same message. Tried another mouse, same thing. Tried a thumb drive, and low and behold, 2 of the 3 USB ports worked. Tried a URL from MS which is supposed to help with this exact problem and possibly fix it: http://windows.microsoft.com/en-us/windows-vista/Tips-for-solving-problems-with-USB-devices
This didn't work.
Contacted HP support and they wanted me to restore back to a restore point as well as updating my BIOS. After searching the issue more extensively using Google, I found that several people said to do this:
Shut down the computer
Remove the power plug
Remove the battery
Put the battery back in
Power up the computer (without the power plug)
This forces a hard reset.
Almost as if by magic, the problem disappeared. A much simpler and less technical solution to the problem than what HP recommended!!!!Hi @yani1015,
Welcome to the HP Support Forums! I see when you were installing your HP Printer you got a message on your Computer saying 'USB Device not Recognized.' To better assist you can you leave me with the following information:
1. What is the Exact model of HP Printer you are using?
2. What is your current Operating system, Windows or Mac and which version?
3. Were you able to install the printer?
4. Did you plug in the USB prior to the software prompting you to?
Click here to download and run the Print and Scan Doctor > www.hp.com/go/tools- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
Please let me know what the PSDR finds, I will watch for your reply.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping! -
CUPS not recognizing Epson USB-Printer
I'm trying to get an Epson Stylus Office Box BX300F to work with Arch x86_64.
I have followed the CUPS wiki page closely and have installed everything it told me to.
When i connected to http://localhost:631/admin and clicked 'add printer' the USB printer was not listed. dmesg however showed me that the printer is at least recognized to some extent:
[ 2295.813154] usb 2-1: new high speed USB device number 6 using ehci_hcd
[ 2295.951540] usblp0: USB Bidirectional printer dev 6 if 1 alt 0 proto 2 vid 0x04B8 pid 0x0848
[ 2297.177498] usb 2-1: usbfs: interface 1 claimed by usblp while 'usb' sets config #1
I tried blacklisting usblp, but then, after rebooting, it got not recognized at all, so i undid that.
Then i found the printer in the openprint db (link), found the driver that is listed as working perfectly there in the AUR (link) and installed that package. But it doesn't seem to help at all, CUPS still doesn't list any USB printer. I've included the full section of /var/log/cups/error_log with loglevel=debug, hope it helps. Any suggestions on how i can get the printer working are greatly appreciated.
cupsd restarted at 20:31:19 ; i refreshed http://localhost:631/admin at 20:31:24 ; and i clicked 'add printer' at 20:31:30
I [05/Jul/2011:20:31:19 +0200] Listening to [v1.::1]:631 (IPv6)
I [05/Jul/2011:20:31:19 +0200] Listening to 127.0.0.1:631 (IPv4)
I [05/Jul/2011:20:31:19 +0200] Listening to /var/run/cups/cups.sock (Domain)
I [05/Jul/2011:20:31:19 +0200] Remote access is disabled.
D [05/Jul/2011:20:31:19 +0200] Added auto ServerAlias klapptop
I [05/Jul/2011:20:31:19 +0200] Loaded configuration file "/etc/cups/cupsd.conf"
I [05/Jul/2011:20:31:19 +0200] Using default TempDir of /var/spool/cups/tmp...
I [05/Jul/2011:20:31:19 +0200] Configured for up to 100 clients.
I [05/Jul/2011:20:31:19 +0200] Allowing up to 100 client connections per host.
I [05/Jul/2011:20:31:19 +0200] Using policy "default" as the default!
D [05/Jul/2011:20:31:19 +0200] load_ppd: Loading /var/cache/cups/Virtual_PDF_Printer.ipp4...
D [05/Jul/2011:20:31:19 +0200] cupsdRegisterPrinter(p=0x7f8696d72660(Virtual_PDF_Printer))
D [05/Jul/2011:20:31:19 +0200] cupsdMarkDirty(---p--)
D [05/Jul/2011:20:31:19 +0200] cupsdSetBusyState: Dirty files
I [05/Jul/2011:20:31:19 +0200] Partial reload complete.
I [05/Jul/2011:20:31:19 +0200] Listening to [v1.::1]:631 on fd 3...
I [05/Jul/2011:20:31:19 +0200] Listening to 127.0.0.1:631 on fd 6...
I [05/Jul/2011:20:31:19 +0200] Listening to /var/run/cups/cups.sock on fd 7...
I [05/Jul/2011:20:31:19 +0200] Resuming new connection processing...
D [05/Jul/2011:20:31:19 +0200] cupsdRegisterPrinter(p=0x7f8696d72660(Virtual_PDF_Printer))
D [05/Jul/2011:20:31:19 +0200] Discarding unused server-restarted event...
D [05/Jul/2011:20:31:19 +0200] PID 1508 (/usr/lib/cups/cgi-bin/admin.cgi) exited with no errors.
D [05/Jul/2011:20:31:20 +0200] Report: clients=0
D [05/Jul/2011:20:31:20 +0200] Report: jobs=2
D [05/Jul/2011:20:31:20 +0200] Report: jobs-active=0
D [05/Jul/2011:20:31:20 +0200] Report: printers=1
D [05/Jul/2011:20:31:20 +0200] Report: printers-implicit=0
D [05/Jul/2011:20:31:20 +0200] Report: stringpool-string-count=859
D [05/Jul/2011:20:31:20 +0200] Report: stringpool-alloc-bytes=9192
D [05/Jul/2011:20:31:20 +0200] Report: stringpool-total-bytes=17984
D [05/Jul/2011:20:31:24 +0200] cupsdAcceptClient: 11 from localhost:631 (IPv6)
D [05/Jul/2011:20:31:24 +0200] cupsdReadClient: 11 GET /admin/?OP=redirect HTTP/1.1
D [05/Jul/2011:20:31:24 +0200] cupsdSetBusyState: Active clients and dirty files
D [05/Jul/2011:20:31:24 +0200] cupsdAuthorize: Authorized as root using Basic
D [05/Jul/2011:20:31:24 +0200] [CGI] argv[0] = "/usr/lib/cups/cgi-bin/admin.cgi"
D [05/Jul/2011:20:31:24 +0200] [CGI] argv[1] = "OP=redirect"
D [05/Jul/2011:20:31:24 +0200] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
D [05/Jul/2011:20:31:24 +0200] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
D [05/Jul/2011:20:31:24 +0200] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
D [05/Jul/2011:20:31:24 +0200] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
D [05/Jul/2011:20:31:24 +0200] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
D [05/Jul/2011:20:31:24 +0200] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
D [05/Jul/2011:20:31:24 +0200] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
D [05/Jul/2011:20:31:24 +0200] [CGI] envp[7] = "CUPS_STATEDIR=/var/run/cups"
D [05/Jul/2011:20:31:24 +0200] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
D [05/Jul/2011:20:31:24 +0200] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [05/Jul/2011:20:31:24 +0200] [CGI] envp[10] = "SERVER_ADMIN=root@klapptop"
D [05/Jul/2011:20:31:24 +0200] [CGI] envp[11] = "SOFTWARE=CUPS/1.4.7"
D [05/Jul/2011:20:31:24 +0200] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
D [05/Jul/2011:20:31:24 +0200] [CGI] envp[13] = "USER=root"
D [05/Jul/2011:20:31:24 +0200] [CGI] envp[14] = "CUPS_SERVER=/var/run/cups/cups.sock"
D [05/Jul/2011:20:31:24 +0200] [CGI] envp[15] = "CUPS_ENCRYPTION=IfRequested"
D [05/Jul/2011:20:31:24 +0200] [CGI] envp[16] = "IPP_PORT=631"
D [05/Jul/2011:20:31:24 +0200] [CGI] envp[17] = "AUTH_TYPE=Basic"
D [05/Jul/2011:20:31:24 +0200] [CGI] envp[18] = "LANG=de.UTF8"
D [05/Jul/2011:20:31:24 +0200] [CGI] envp[19] = "REDIRECT_STATUS=1"
D [05/Jul/2011:20:31:24 +0200] [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
D [05/Jul/2011:20:31:24 +0200] [CGI] envp[21] = "SERVER_NAME=localhost"
D [05/Jul/2011:20:31:24 +0200] [CGI] envp[22] = "SERVER_PORT=631"
D [05/Jul/2011:20:31:24 +0200] [CGI] envp[23] = "REMOTE_ADDR=[v1.::1]"
D [05/Jul/2011:20:31:24 +0200] [CGI] envp[24] = "REMOTE_HOST=localhost"
D [05/Jul/2011:20:31:24 +0200] [CGI] envp[25] = "SCRIPT_NAME=/admin/"
D [05/Jul/2011:20:31:24 +0200] [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/cups/doc/admin/"
D [05/Jul/2011:20:31:24 +0200] [CGI] envp[27] = "REMOTE_USER=root"
D [05/Jul/2011:20:31:24 +0200] [CGI] envp[28] = "SERVER_PROTOCOL=HTTP/1.1"
D [05/Jul/2011:20:31:24 +0200] [CGI] envp[29] = "HTTP_COOKIE=org.cups.sid=8ecaff0f260930f93ef5e9dff799b7c7"
D [05/Jul/2011:20:31:24 +0200] [CGI] envp[30] = "HTTP_USER_AGENT=Mozilla/5.0 (X11; Linux x86_64; rv:5.0) Gecko/20100101 Firefox/5.0"
D [05/Jul/2011:20:31:24 +0200] [CGI] envp[31] = "REQUEST_METHOD=GET"
D [05/Jul/2011:20:31:24 +0200] [CGI] envp[32] = "QUERY_STRING=OP=redirect"
D [05/Jul/2011:20:31:24 +0200] [CGI] Started /usr/lib/cups/cgi-bin/admin.cgi (PID 1509)
I [05/Jul/2011:20:31:24 +0200] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=1509)
D [05/Jul/2011:20:31:24 +0200] cupsdSendCommand: 11 file=12
D [05/Jul/2011:20:31:24 +0200] [CGI] admin.cgi started...
D [05/Jul/2011:20:31:24 +0200] cupsdAcceptClient: 13 from localhost (Domain)
D [05/Jul/2011:20:31:24 +0200] [CGI] http=0x7f1f946405c0
D [05/Jul/2011:20:31:24 +0200] [CGI] org.cups.sid cookie is "8ecaff0f260930f93ef5e9dff799b7c7"
D [05/Jul/2011:20:31:24 +0200] [CGI] redirecting with prefix http://localhost:631!
D [05/Jul/2011:20:31:24 +0200] cupsdReadClient: 13 WAITING Closing on EOF
D [05/Jul/2011:20:31:24 +0200] cupsdCloseClient: 13
D [05/Jul/2011:20:31:24 +0200] Script header: Location: http://localhost:631/admin
D [05/Jul/2011:20:31:24 +0200] Script header:
D [05/Jul/2011:20:31:24 +0200] cupsdSetBusyState: Dirty files
D [05/Jul/2011:20:31:24 +0200] PID 1509 (/usr/lib/cups/cgi-bin/admin.cgi) exited with no errors.
D [05/Jul/2011:20:31:24 +0200] cupsdReadClient: 11 GET /admin HTTP/1.1
D [05/Jul/2011:20:31:24 +0200] cupsdSetBusyState: Active clients and dirty files
D [05/Jul/2011:20:31:24 +0200] cupsdAuthorize: No authentication data provided.
D [05/Jul/2011:20:31:24 +0200] [CGI] argv[0] = "/usr/lib/cups/cgi-bin/admin.cgi"
D [05/Jul/2011:20:31:24 +0200] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
D [05/Jul/2011:20:31:24 +0200] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
D [05/Jul/2011:20:31:24 +0200] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
D [05/Jul/2011:20:31:24 +0200] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
D [05/Jul/2011:20:31:24 +0200] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
D [05/Jul/2011:20:31:24 +0200] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
D [05/Jul/2011:20:31:24 +0200] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
D [05/Jul/2011:20:31:24 +0200] [CGI] envp[7] = "CUPS_STATEDIR=/var/run/cups"
D [05/Jul/2011:20:31:24 +0200] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
D [05/Jul/2011:20:31:24 +0200] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [05/Jul/2011:20:31:24 +0200] [CGI] envp[10] = "SERVER_ADMIN=root@klapptop"
D [05/Jul/2011:20:31:24 +0200] [CGI] envp[11] = "SOFTWARE=CUPS/1.4.7"
D [05/Jul/2011:20:31:24 +0200] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
D [05/Jul/2011:20:31:24 +0200] [CGI] envp[13] = "USER=root"
D [05/Jul/2011:20:31:24 +0200] [CGI] envp[14] = "CUPS_SERVER=/var/run/cups/cups.sock"
D [05/Jul/2011:20:31:24 +0200] [CGI] envp[15] = "CUPS_ENCRYPTION=IfRequested"
D [05/Jul/2011:20:31:24 +0200] [CGI] envp[16] = "IPP_PORT=631"
D [05/Jul/2011:20:31:24 +0200] [CGI] envp[17] = "LANG=de.UTF8"
D [05/Jul/2011:20:31:24 +0200] [CGI] envp[18] = "REDIRECT_STATUS=1"
D [05/Jul/2011:20:31:24 +0200] [CGI] envp[19] = "GATEWAY_INTERFACE=CGI/1.1"
D [05/Jul/2011:20:31:24 +0200] [CGI] envp[20] = "SERVER_NAME=localhost"
D [05/Jul/2011:20:31:24 +0200] [CGI] envp[21] = "SERVER_PORT=631"
D [05/Jul/2011:20:31:24 +0200] [CGI] envp[22] = "REMOTE_ADDR=[v1.::1]"
D [05/Jul/2011:20:31:24 +0200] [CGI] envp[23] = "REMOTE_HOST=localhost"
D [05/Jul/2011:20:31:24 +0200] [CGI] envp[24] = "SCRIPT_NAME=/admin"
D [05/Jul/2011:20:31:24 +0200] [CGI] envp[25] = "SCRIPT_FILENAME=/usr/share/cups/doc/admin"
D [05/Jul/2011:20:31:24 +0200] [CGI] envp[26] = "SERVER_PROTOCOL=HTTP/1.1"
D [05/Jul/2011:20:31:24 +0200] [CGI] envp[27] = "HTTP_COOKIE=org.cups.sid=8ecaff0f260930f93ef5e9dff799b7c7"
D [05/Jul/2011:20:31:24 +0200] [CGI] envp[28] = "HTTP_USER_AGENT=Mozilla/5.0 (X11; Linux x86_64; rv:5.0) Gecko/20100101 Firefox/5.0"
D [05/Jul/2011:20:31:24 +0200] [CGI] envp[29] = "REQUEST_METHOD=GET"
D [05/Jul/2011:20:31:24 +0200] [CGI] envp[30] = "QUERY_STRING="
D [05/Jul/2011:20:31:24 +0200] [CGI] Started /usr/lib/cups/cgi-bin/admin.cgi (PID 1510)
I [05/Jul/2011:20:31:24 +0200] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=1510)
D [05/Jul/2011:20:31:24 +0200] cupsdSendCommand: 11 file=12
D [05/Jul/2011:20:31:24 +0200] [CGI] admin.cgi started...
D [05/Jul/2011:20:31:24 +0200] cupsdAcceptClient: 13 from localhost (Domain)
D [05/Jul/2011:20:31:24 +0200] [CGI] http=0x7f7248b935c0
D [05/Jul/2011:20:31:24 +0200] [CGI] org.cups.sid cookie is "8ecaff0f260930f93ef5e9dff799b7c7"
D [05/Jul/2011:20:31:24 +0200] [CGI] No form data, showing main menu...
D [05/Jul/2011:20:31:24 +0200] [CGI] /usr/share/cups/drivers/pscript5.dll: No such file or directory
D [05/Jul/2011:20:31:24 +0200] cupsdReadClient: 13 POST / HTTP/1.1
D [05/Jul/2011:20:31:24 +0200] cupsdAuthorize: No authentication data provided.
D [05/Jul/2011:20:31:24 +0200] cupsdReadClient: 13 1.1 Get-Subscriptions 1
D [05/Jul/2011:20:31:24 +0200] Get-Subscriptions ipp://localhost/
D [05/Jul/2011:20:31:24 +0200] Returning IPP successful-ok for Get-Subscriptions (ipp://localhost/) from localhost
D [05/Jul/2011:20:31:24 +0200] Script header: Content-Type: text/html;charset=utf-8
D [05/Jul/2011:20:31:24 +0200] Script header:
D [05/Jul/2011:20:31:24 +0200] cupsdReadClient: 13 WAITING Closing on EOF
D [05/Jul/2011:20:31:24 +0200] cupsdCloseClient: 13
D [05/Jul/2011:20:31:24 +0200] cupsdSetBusyState: Dirty files
D [05/Jul/2011:20:31:24 +0200] PID 1510 (/usr/lib/cups/cgi-bin/admin.cgi) exited with no errors.
D [05/Jul/2011:20:31:30 +0200] cupsdReadClient: 11 POST /admin/ HTTP/1.1
D [05/Jul/2011:20:31:30 +0200] cupsdSetBusyState: Active clients and dirty files
D [05/Jul/2011:20:31:30 +0200] cupsdAuthorize: Authorized as root using Basic
D [05/Jul/2011:20:31:30 +0200] [CGI] argv[0] = "/usr/lib/cups/cgi-bin/admin.cgi"
D [05/Jul/2011:20:31:30 +0200] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
D [05/Jul/2011:20:31:30 +0200] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
D [05/Jul/2011:20:31:30 +0200] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
D [05/Jul/2011:20:31:30 +0200] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
D [05/Jul/2011:20:31:30 +0200] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
D [05/Jul/2011:20:31:30 +0200] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
D [05/Jul/2011:20:31:30 +0200] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
D [05/Jul/2011:20:31:30 +0200] [CGI] envp[7] = "CUPS_STATEDIR=/var/run/cups"
D [05/Jul/2011:20:31:30 +0200] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
D [05/Jul/2011:20:31:30 +0200] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [05/Jul/2011:20:31:30 +0200] [CGI] envp[10] = "SERVER_ADMIN=root@klapptop"
D [05/Jul/2011:20:31:30 +0200] [CGI] envp[11] = "SOFTWARE=CUPS/1.4.7"
D [05/Jul/2011:20:31:30 +0200] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
D [05/Jul/2011:20:31:30 +0200] [CGI] envp[13] = "USER=root"
D [05/Jul/2011:20:31:30 +0200] [CGI] envp[14] = "CUPS_SERVER=/var/run/cups/cups.sock"
D [05/Jul/2011:20:31:30 +0200] [CGI] envp[15] = "CUPS_ENCRYPTION=IfRequested"
D [05/Jul/2011:20:31:30 +0200] [CGI] envp[16] = "IPP_PORT=631"
D [05/Jul/2011:20:31:30 +0200] [CGI] envp[17] = "AUTH_TYPE=Basic"
D [05/Jul/2011:20:31:30 +0200] [CGI] envp[18] = "LANG=de.UTF8"
D [05/Jul/2011:20:31:30 +0200] [CGI] envp[19] = "REDIRECT_STATUS=1"
D [05/Jul/2011:20:31:30 +0200] [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
D [05/Jul/2011:20:31:30 +0200] [CGI] envp[21] = "SERVER_NAME=localhost"
D [05/Jul/2011:20:31:30 +0200] [CGI] envp[22] = "SERVER_PORT=631"
D [05/Jul/2011:20:31:30 +0200] [CGI] envp[23] = "REMOTE_ADDR=[v1.::1]"
D [05/Jul/2011:20:31:30 +0200] [CGI] envp[24] = "REMOTE_HOST=localhost"
D [05/Jul/2011:20:31:30 +0200] [CGI] envp[25] = "SCRIPT_NAME=/admin/"
D [05/Jul/2011:20:31:30 +0200] [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/cups/doc/admin/"
D [05/Jul/2011:20:31:30 +0200] [CGI] envp[27] = "REMOTE_USER=root"
D [05/Jul/2011:20:31:30 +0200] [CGI] envp[28] = "SERVER_PROTOCOL=HTTP/1.1"
D [05/Jul/2011:20:31:30 +0200] [CGI] envp[29] = "HTTP_COOKIE=org.cups.sid=8ecaff0f260930f93ef5e9dff799b7c7"
D [05/Jul/2011:20:31:30 +0200] [CGI] envp[30] = "HTTP_USER_AGENT=Mozilla/5.0 (X11; Linux x86_64; rv:5.0) Gecko/20100101 Firefox/5.0"
D [05/Jul/2011:20:31:30 +0200] [CGI] envp[31] = "HTTP_REFERER=http://localhost:631/admin"
D [05/Jul/2011:20:31:30 +0200] [CGI] envp[32] = "REQUEST_METHOD=POST"
D [05/Jul/2011:20:31:30 +0200] [CGI] envp[33] = "CONTENT_LENGTH=60"
D [05/Jul/2011:20:31:30 +0200] [CGI] envp[34] = "CONTENT_TYPE=application/x-www-form-urlencoded"
D [05/Jul/2011:20:31:30 +0200] [CGI] Started /usr/lib/cups/cgi-bin/admin.cgi (PID 1511)
I [05/Jul/2011:20:31:30 +0200] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=1511)
D [05/Jul/2011:20:31:30 +0200] cupsdSendCommand: 11 file=13
D [05/Jul/2011:20:31:30 +0200] [CGI] admin.cgi started...
D [05/Jul/2011:20:31:30 +0200] cupsdAcceptClient: 14 from localhost (Domain)
D [05/Jul/2011:20:31:30 +0200] [CGI] http=0x7f2a6b99e5c0
D [05/Jul/2011:20:31:30 +0200] [CGI] org.cups.sid cookie is "8ecaff0f260930f93ef5e9dff799b7c7"
D [05/Jul/2011:20:31:30 +0200] [CGI] op="add-printer"...
D [05/Jul/2011:20:31:30 +0200] [CGI] do_am_printer: DEVICE_URI="(null)"
D [05/Jul/2011:20:31:30 +0200] [CGI] Getting list of devices...
D [05/Jul/2011:20:31:30 +0200] cupsdReadClient: 14 POST / HTTP/1.1
D [05/Jul/2011:20:31:30 +0200] cupsdAuthorize: No authentication data provided.
D [05/Jul/2011:20:31:30 +0200] cupsdReadClient: 14 1.1 CUPS-Get-Devices 1
D [05/Jul/2011:20:31:30 +0200] CUPS-Get-Devices
D [05/Jul/2011:20:31:30 +0200] cupsdIsAuthorized: username=""
D [05/Jul/2011:20:31:30 +0200] Returning HTTP Unauthorized for CUPS-Get-Devices (no URI) from localhost
D [05/Jul/2011:20:31:30 +0200] cupsdSendHeader: 14 WWW-Authenticate: Basic realm="CUPS", trc="y"
D [05/Jul/2011:20:31:30 +0200] cupsdReadClient: 14 WAITING Closing on EOF
D [05/Jul/2011:20:31:30 +0200] cupsdCloseClient: 14
D [05/Jul/2011:20:31:30 +0200] cupsdAcceptClient: 14 from localhost (Domain)
D [05/Jul/2011:20:31:30 +0200] cupsdReadClient: 14 WAITING Closing on EOF
D [05/Jul/2011:20:31:30 +0200] cupsdCloseClient: 14
D [05/Jul/2011:20:31:30 +0200] cupsdAcceptClient: 14 from localhost (Domain)
D [05/Jul/2011:20:31:30 +0200] cupsdReadClient: 14 POST / HTTP/1.1
D [05/Jul/2011:20:31:30 +0200] cupsdAuthorize: Authorized as root using Local
D [05/Jul/2011:20:31:30 +0200] cupsdReadClient: 14 1.1 CUPS-Get-Devices 1
D [05/Jul/2011:20:31:30 +0200] CUPS-Get-Devices
D [05/Jul/2011:20:31:30 +0200] cupsdIsAuthorized: username="root"
D [05/Jul/2011:20:31:30 +0200] [CGI] argv[0] = "/usr/lib/cups/daemon/cups-deviced"
D [05/Jul/2011:20:31:30 +0200] [CGI] argv[1] = "1"
D [05/Jul/2011:20:31:30 +0200] [CGI] argv[2] = "0"
D [05/Jul/2011:20:31:30 +0200] [CGI] argv[3] = "5"
D [05/Jul/2011:20:31:30 +0200] [CGI] argv[4] = "2"
D [05/Jul/2011:20:31:30 +0200] [CGI] argv[5] = "requested-attributes=all"
D [05/Jul/2011:20:31:30 +0200] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
D [05/Jul/2011:20:31:30 +0200] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
D [05/Jul/2011:20:31:30 +0200] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
D [05/Jul/2011:20:31:30 +0200] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
D [05/Jul/2011:20:31:30 +0200] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
D [05/Jul/2011:20:31:30 +0200] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
D [05/Jul/2011:20:31:30 +0200] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
D [05/Jul/2011:20:31:30 +0200] [CGI] envp[7] = "CUPS_STATEDIR=/var/run/cups"
D [05/Jul/2011:20:31:30 +0200] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
D [05/Jul/2011:20:31:30 +0200] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [05/Jul/2011:20:31:30 +0200] [CGI] envp[10] = "SERVER_ADMIN=root@klapptop"
D [05/Jul/2011:20:31:30 +0200] [CGI] envp[11] = "SOFTWARE=CUPS/1.4.7"
D [05/Jul/2011:20:31:30 +0200] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
D [05/Jul/2011:20:31:30 +0200] [CGI] envp[13] = "USER=root"
D [05/Jul/2011:20:31:30 +0200] [CGI] envp[14] = "CUPS_SERVER=/var/run/cups/cups.sock"
D [05/Jul/2011:20:31:30 +0200] [CGI] envp[15] = "CUPS_ENCRYPTION=IfRequested"
D [05/Jul/2011:20:31:30 +0200] [CGI] envp[16] = "IPP_PORT=631"
D [05/Jul/2011:20:31:30 +0200] [CGI] envp[17] = "AUTH_TYPE=Local"
D [05/Jul/2011:20:31:30 +0200] [CGI] envp[18] = "LANG=de.UTF8"
D [05/Jul/2011:20:31:30 +0200] [CGI] envp[19] = "REDIRECT_STATUS=1"
D [05/Jul/2011:20:31:30 +0200] [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
D [05/Jul/2011:20:31:30 +0200] [CGI] envp[21] = "SERVER_NAME=localhost"
D [05/Jul/2011:20:31:30 +0200] [CGI] envp[22] = "SERVER_PORT=631"
D [05/Jul/2011:20:31:30 +0200] [CGI] envp[23] = "REMOTE_ADDR="
D [05/Jul/2011:20:31:30 +0200] [CGI] envp[24] = "REMOTE_HOST=localhost"
D [05/Jul/2011:20:31:30 +0200] [CGI] envp[25] = "SCRIPT_NAME=/"
D [05/Jul/2011:20:31:30 +0200] [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/cups/doc/"
D [05/Jul/2011:20:31:30 +0200] [CGI] envp[27] = "REMOTE_USER=root"
D [05/Jul/2011:20:31:30 +0200] [CGI] envp[28] = "SERVER_PROTOCOL=HTTP/1.1"
D [05/Jul/2011:20:31:30 +0200] [CGI] envp[29] = "HTTP_USER_AGENT=CUPS/1.4.7"
D [05/Jul/2011:20:31:30 +0200] [CGI] envp[30] = "REQUEST_METHOD=POST"
D [05/Jul/2011:20:31:30 +0200] [CGI] envp[31] = "CONTENT_LENGTH=88"
D [05/Jul/2011:20:31:30 +0200] [CGI] envp[32] = "CONTENT_TYPE=application/ipp"
D [05/Jul/2011:20:31:30 +0200] [CGI] Started /usr/lib/cups/daemon/cups-deviced (PID 1512)
I [05/Jul/2011:20:31:30 +0200] Started "/usr/lib/cups/daemon/cups-deviced" (pid=1512)
D [05/Jul/2011:20:31:30 +0200] cupsdSendCommand: 14 file=15
D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/http (PID 1513)
D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/socket (PID 1514)
D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/snmp (PID 1515)
D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/mdns (PID 1516)
D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/usb (PID 1517)
D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/smb (PID 1518)
D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/lpd (PID 1519)
D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/beh (PID 1520)
D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/dnssd (PID 1521)
D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/scsi (PID 1522)
D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/serial (PID 1523)
D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/cups-pdf (PID 1524)
D [05/Jul/2011:20:31:30 +0200] [CGI] list_devices
D [05/Jul/2011:20:31:30 +0200] [CGI] usb_find_busses=6
D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/parallel (PID 1525)
D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/bluetooth (PID 1526)
D [05/Jul/2011:20:31:30 +0200] [CGI] perl: warning: Setting locale failed.
D [05/Jul/2011:20:31:30 +0200] [CGI] perl: warning: Please check that your locale settings:
D [05/Jul/2011:20:31:30 +0200] [CGI] LANGUAGE = (unset),
D [05/Jul/2011:20:31:30 +0200] [CGI] LC_ALL = (unset),
D [05/Jul/2011:20:31:30 +0200] [CGI] LANG = "de.UTF8"
D [05/Jul/2011:20:31:30 +0200] [CGI] are supported and installed on your system.
D [05/Jul/2011:20:31:30 +0200] [CGI] perl: warning: Falling back to the standard locale ("C").
D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/ipp (PID 1527)
D [05/Jul/2011:20:31:30 +0200] Script header: Content-Type: application/ipp
D [05/Jul/2011:20:31:30 +0200] Script header:
D [05/Jul/2011:20:31:30 +0200] [CGI] Flushed attributes...
D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Found device "http"...
D [05/Jul/2011:20:31:30 +0200] [CGI] Flushed attributes...
D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Found device "socket"...
D [05/Jul/2011:20:31:30 +0200] [CGI] Flushed attributes...
D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Found device "smb"...
D [05/Jul/2011:20:31:30 +0200] [CGI] Flushed attributes...
D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Found device "beh"...
D [05/Jul/2011:20:31:30 +0200] [CGI] Flushed attributes...
D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Found device "cups-pdf:/"...
D [05/Jul/2011:20:31:30 +0200] [cups-deviced] PID 1514 (socket) exited with no errors.
D [05/Jul/2011:20:31:30 +0200] [cups-deviced] PID 1516 (mdns) exited with no errors.
D [05/Jul/2011:20:31:30 +0200] [cups-deviced] PID 1518 (smb) exited with no errors.
D [05/Jul/2011:20:31:30 +0200] [cups-deviced] PID 1520 (beh) exited with no errors.
D [05/Jul/2011:20:31:30 +0200] [cups-deviced] PID 1524 (cups-pdf) exited with no errors.
D [05/Jul/2011:20:31:30 +0200] [CGI] Flushed attributes...
D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Found device "lpd"...
D [05/Jul/2011:20:31:30 +0200] [cups-deviced] PID 1513 (http) exited with no errors.
E [05/Jul/2011:20:31:30 +0200] [CGI] Unable to create avahi client: Resource temporarily unavailable
E [05/Jul/2011:20:31:30 +0200] [cups-deviced] PID 1521 (dnssd) stopped with status 1!
D [05/Jul/2011:20:31:30 +0200] [cups-deviced] PID 1525 (parallel) exited with no errors.
D [05/Jul/2011:20:31:30 +0200] [cups-deviced] PID 1522 (scsi) exited with no errors.
D [05/Jul/2011:20:31:30 +0200] [CGI] Flushed attributes...
D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Found device "scsi"...
D [05/Jul/2011:20:31:30 +0200] [cups-deviced] PID 1526 (bluetooth) exited with no errors.
D [05/Jul/2011:20:31:30 +0200] [cups-deviced] PID 1519 (lpd) exited with no errors.
D [05/Jul/2011:20:31:30 +0200] [CGI] Flushed attributes...
D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Found device "ipp"...
D [05/Jul/2011:20:31:30 +0200] [cups-deviced] PID 1527 (ipp) exited with no errors.
D [05/Jul/2011:20:31:30 +0200] [cups-deviced] PID 1523 (serial) exited with no errors.
D [05/Jul/2011:20:31:30 +0200] [CGI] usb_find_devices=9
D [05/Jul/2011:20:31:30 +0200] [cups-deviced] PID 1517 (usb) exited with no errors.
D [05/Jul/2011:20:31:32 +0200] [cups-deviced] PID 1515 (snmp) exited with no errors.
D [05/Jul/2011:20:31:32 +0200] PID 1512 (/usr/lib/cups/daemon/cups-deviced) exited with no errors.
D [05/Jul/2011:20:31:32 +0200] [CGI] Got device list!
D [05/Jul/2011:20:31:32 +0200] cupsdReadClient: 14 WAITING Closing on EOF
D [05/Jul/2011:20:31:32 +0200] cupsdCloseClient: 14
D [05/Jul/2011:20:31:32 +0200] PID 1511 (/usr/lib/cups/cgi-bin/admin.cgi) exited with no errors.
D [05/Jul/2011:20:31:32 +0200] Script header: Content-Type: text/html;charset=utf-8
D [05/Jul/2011:20:31:32 +0200] Script header:
D [05/Jul/2011:20:31:32 +0200] cupsdSetBusyState: Dirty files
D [05/Jul/2011:20:31:32 +0200] [CGI] Regular expression "[a-z]+://"
D [05/Jul/2011:20:31:32 +0200] [CGI] Regular expression "[a-z]+://"
D [05/Jul/2011:20:31:32 +0200] [CGI] Regular expression "[a-z]+://"
D [05/Jul/2011:20:31:32 +0200] [CGI] Regular expression "[a-z]+://"
D [05/Jul/2011:20:31:32 +0200] [CGI] Regular expression "[a-z]+://"
D [05/Jul/2011:20:31:32 +0200] [CGI] Regular expression "[a-z]+://"
D [05/Jul/2011:20:31:32 +0200] [CGI] Regular expression "[a-z]+://"
D [05/Jul/2011:20:31:32 +0200] [CGI] Regular expression "[a-z]+://"
D [05/Jul/2011:20:31:32 +0200] [CGI] Regular expression "[a-z]+://"
D [05/Jul/2011:20:31:32 +0200] [CGI] Regular expression "[a-z]+://"
D [05/Jul/2011:20:31:32 +0200] [CGI] Regular expression "[a-z]+://"
D [05/Jul/2011:20:31:32 +0200] [CGI] Regular expression "[a-z]+://"
D [05/Jul/2011:20:31:32 +0200] [CGI] Regular expression "[a-z]+://"
D [05/Jul/2011:20:31:32 +0200] [CGI] Regular expression "[a-z]+://"
D [05/Jul/2011:20:31:32 +0200] [CGI] Regular expression "[a-z]+://"
D [05/Jul/2011:20:31:32 +0200] [CGI] Regular expression "[a-z]+://"
I [05/Jul/2011:20:31:50 +0200] Generating printcap /etc/printcap...
D [05/Jul/2011:20:31:50 +0200] cupsdSetBusyState: Not busy
D [05/Jul/2011:20:32:02 +0200] cupsdReadClient: 11 WAITING Closing on EOF
D [05/Jul/2011:20:32:02 +0200] cupsdCloseClient: 11I have gotten around to give this printer another try and when i connected it and read through /var/log/cups/error_log i noticed 2 lines close to the end that seem to be the problem:
D [24/Aug/2011:12:42:23 +0200] [CGI] libusb couldn't open USB device /dev/bus/usb/002/006: Permission denied.
D [24/Aug/2011:12:42:23 +0200] [CGI] libusb requires write access to USB device nodes.
i checked the permissions, but they seem to be allright:
$ ls -l /dev/bus/usb/002/006
crw-rw-r--+ 1 root scanner 189, 133 24. Aug 12:42 /dev/bus/usb/002/006
$ id
...,7(lp),10(wheel),96(scanner),97(camera)
here is the complete part of error_log from connecting the printer:
D [24/Aug/2011:12:42:23 +0200] cupsdAcceptClient: 12 from localhost (Domain)
D [24/Aug/2011:12:42:23 +0200] Report: clients=1
D [24/Aug/2011:12:42:23 +0200] Report: jobs=2
D [24/Aug/2011:12:42:23 +0200] Report: jobs-active=0
D [24/Aug/2011:12:42:23 +0200] Report: printers=1
D [24/Aug/2011:12:42:23 +0200] Report: printers-implicit=0
D [24/Aug/2011:12:42:23 +0200] Report: stringpool-string-count=859
D [24/Aug/2011:12:42:23 +0200] Report: stringpool-alloc-bytes=9192
D [24/Aug/2011:12:42:23 +0200] Report: stringpool-total-bytes=17984
D [24/Aug/2011:12:42:23 +0200] cupsdReadClient: 12 POST / HTTP/1.1
D [24/Aug/2011:12:42:23 +0200] cupsdSetBusyState: Active clients
D [24/Aug/2011:12:42:23 +0200] cupsdAuthorize: No authentication data provided.
D [24/Aug/2011:12:42:23 +0200] cupsdReadClient: 12 1.1 CUPS-Get-Devices 1
D [24/Aug/2011:12:42:23 +0200] CUPS-Get-Devices
D [24/Aug/2011:12:42:23 +0200] cupsdIsAuthorized: username=""
D [24/Aug/2011:12:42:23 +0200] Returning HTTP Unauthorized for CUPS-Get-Devices (no URI) from localhost
D [24/Aug/2011:12:42:23 +0200] cupsdSendHeader: 12 WWW-Authenticate: Basic realm="CUPS", trc="y"
D [24/Aug/2011:12:42:23 +0200] cupsdReadClient: 12 WAITING Closing on EOF
D [24/Aug/2011:12:42:23 +0200] cupsdCloseClient: 12
D [24/Aug/2011:12:42:23 +0200] cupsdSetBusyState: Not busy
D [24/Aug/2011:12:42:23 +0200] cupsdAcceptClient: 12 from localhost (Domain)
D [24/Aug/2011:12:42:23 +0200] cupsdReadClient: 12 WAITING Closing on EOF
D [24/Aug/2011:12:42:23 +0200] cupsdCloseClient: 12
D [24/Aug/2011:12:42:23 +0200] cupsdAcceptClient: 12 from localhost (Domain)
D [24/Aug/2011:12:42:23 +0200] cupsdReadClient: 12 POST / HTTP/1.1
D [24/Aug/2011:12:42:23 +0200] cupsdSetBusyState: Active clients
D [24/Aug/2011:12:42:23 +0200] cupsdAuthorize: Authorized as root using PeerCred
D [24/Aug/2011:12:42:23 +0200] cupsdReadClient: 12 1.1 CUPS-Get-Devices 1
D [24/Aug/2011:12:42:23 +0200] CUPS-Get-Devices
D [24/Aug/2011:12:42:23 +0200] cupsdIsAuthorized: username="root"
D [24/Aug/2011:12:42:23 +0200] [CGI] argv[0] = "/usr/lib/cups/daemon/cups-deviced"
D [24/Aug/2011:12:42:23 +0200] [CGI] argv[1] = "1"
D [24/Aug/2011:12:42:23 +0200] [CGI] argv[2] = "0"
D [24/Aug/2011:12:42:23 +0200] [CGI] argv[3] = "2"
D [24/Aug/2011:12:42:23 +0200] [CGI] argv[4] = "2"
D [24/Aug/2011:12:42:23 +0200] [CGI] argv[5] = "requested-attributes=all exclude-schemes='beh','cups-pdf','bluetooth','dnssd','http','https','ipp','lpd','ncp','parallel','scsi','smb','snmp','socket'"
D [24/Aug/2011:12:42:23 +0200] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
D [24/Aug/2011:12:42:23 +0200] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
D [24/Aug/2011:12:42:23 +0200] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
D [24/Aug/2011:12:42:23 +0200] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
D [24/Aug/2011:12:42:23 +0200] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
D [24/Aug/2011:12:42:23 +0200] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
D [24/Aug/2011:12:42:23 +0200] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
D [24/Aug/2011:12:42:23 +0200] [CGI] envp[7] = "CUPS_STATEDIR=/var/run/cups"
D [24/Aug/2011:12:42:23 +0200] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
D [24/Aug/2011:12:42:23 +0200] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [24/Aug/2011:12:42:23 +0200] [CGI] envp[10] = "SERVER_ADMIN=root@klapptop"
D [24/Aug/2011:12:42:23 +0200] [CGI] envp[11] = "SOFTWARE=CUPS/1.4.8"
D [24/Aug/2011:12:42:23 +0200] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
D [24/Aug/2011:12:42:23 +0200] [CGI] envp[13] = "USER=root"
D [24/Aug/2011:12:42:23 +0200] [CGI] envp[14] = "CUPS_SERVER=/var/run/cups/cups.sock"
D [24/Aug/2011:12:42:23 +0200] [CGI] envp[15] = "CUPS_ENCRYPTION=IfRequested"
D [24/Aug/2011:12:42:23 +0200] [CGI] envp[16] = "IPP_PORT=631"
D [24/Aug/2011:12:42:23 +0200] [CGI] envp[17] = "AUTH_TYPE=PeerCred"
D [24/Aug/2011:12:42:23 +0200] [CGI] envp[18] = "LANG=en_US.UTF8"
D [24/Aug/2011:12:42:23 +0200] [CGI] envp[19] = "REDIRECT_STATUS=1"
D [24/Aug/2011:12:42:23 +0200] [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
D [24/Aug/2011:12:42:23 +0200] [CGI] envp[21] = "SERVER_NAME=localhost"
D [24/Aug/2011:12:42:23 +0200] [CGI] envp[22] = "SERVER_PORT=631"
D [24/Aug/2011:12:42:23 +0200] [CGI] envp[23] = "REMOTE_ADDR="
D [24/Aug/2011:12:42:23 +0200] [CGI] envp[24] = "REMOTE_HOST=localhost"
D [24/Aug/2011:12:42:23 +0200] [CGI] envp[25] = "SCRIPT_NAME=/"
D [24/Aug/2011:12:42:23 +0200] [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/cups/doc/"
D [24/Aug/2011:12:42:23 +0200] [CGI] envp[27] = "REMOTE_USER=root"
D [24/Aug/2011:12:42:23 +0200] [CGI] envp[28] = "SERVER_PROTOCOL=HTTP/1.1"
D [24/Aug/2011:12:42:23 +0200] [CGI] envp[29] = "HTTP_USER_AGENT=CUPS/1.4.8"
D [24/Aug/2011:12:42:23 +0200] [CGI] envp[30] = "REQUEST_METHOD=POST"
D [24/Aug/2011:12:42:23 +0200] [CGI] envp[31] = "CONTENT_LENGTH=244"
D [24/Aug/2011:12:42:23 +0200] [CGI] envp[32] = "CONTENT_TYPE=application/ipp"
D [24/Aug/2011:12:42:23 +0200] [CGI] Started /usr/lib/cups/daemon/cups-deviced (PID 1501)
I [24/Aug/2011:12:42:23 +0200] Started "/usr/lib/cups/daemon/cups-deviced" (pid=1501)
D [24/Aug/2011:12:42:23 +0200] cupsdSendCommand: 12 file=14
D [24/Aug/2011:12:42:23 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/mdns (PID 1502)
D [24/Aug/2011:12:42:23 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/usb (PID 1503)
D [24/Aug/2011:12:42:23 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/serial (PID 1504)
D [24/Aug/2011:12:42:23 +0200] [CGI] list_devices
D [24/Aug/2011:12:42:23 +0200] [CGI] usb_find_busses=6
D [24/Aug/2011:12:42:23 +0200] [cups-deviced] PID 1504 (serial) exited with no errors.
D [24/Aug/2011:12:42:23 +0200] [cups-deviced] PID 1502 (mdns) exited with no errors.
D [24/Aug/2011:12:42:23 +0200] [CGI] usb_find_devices=9
D [24/Aug/2011:12:42:23 +0200] [CGI] libusb couldn't open USB device /dev/bus/usb/002/006: Permission denied.
D [24/Aug/2011:12:42:23 +0200] [CGI] libusb requires write access to USB device nodes.
D [24/Aug/2011:12:42:23 +0200] [cups-deviced] PID 1503 (usb) exited with no errors.
D [24/Aug/2011:12:42:23 +0200] PID 1501 (/usr/lib/cups/daemon/cups-deviced) exited with no errors.
D [24/Aug/2011:12:42:23 +0200] Script header: Content-Type: application/ipp
D [24/Aug/2011:12:42:23 +0200] Script header:
D [24/Aug/2011:12:42:23 +0200] cupsdSetBusyState: Not busy
D [24/Aug/2011:12:42:23 +0200] cupsdReadClient: 12 WAITING Closing on EOF
D [24/Aug/2011:12:42:23 +0200] cupsdCloseClient: 12
i found a related thread ( https://bbs.archlinux.org/viewtopic.php?id=110477 ) but that deals with digital cameras, so it doesn't really help me. Other forum threads i found about libusb permission errors were mostly people that forgot to add themselves to lp and the like. Does anyone know why i get the permission errors and how i can fix it? Any help is greatly appreciated! -
i down loaded my photos from my iphone onto my compuyrt then attempted to upgrade to ios on my iphone then sync my phone and computer. now everything is wiped off my phone the itunes and usb visual is on my phonr and it is not recognized on my computer if any one knows how to resore this please let me know thank you
Thank you this helped. I am not very knowledgable about all this but I was able to get the phone restored. I got everything back but my iPod. I thought I was just updating but what happened was my phone was wiped out and the lates iPhone software was installed.
-
Hello!
I have a problem connecting my Ipod Shuffle 2nd generation to my Windows 8 based laptop. The computer doesn't recognize the Ipod and issues an error message saying 'USB device not recognized'. I tried uninstaling ITunes(latest version) and all other Apple software and reinstaling it back again, checked my USB hubs in the 'Device Manager' section of the Control Panel, you name it.
I could really use some help solving this.
I've turned to the troubleshooting section in Apple Support but it has nothing concerning situations in wich the device isn't even shown in the 'My Computer' folder.
Help a brother out, will you???Found a solution in another forum http://en.kioskea.net/forum/affich-63733-ipod-not-detected-on-computer (a few posts down).
It was for an IPOD so you can see those details in the link.
Found how to reset a shuffle and inserted it into these instructions - did not have to follow his last steps.
- Turn off computer.
- Plug Shuffle into usb.
- Then you must reset your shuffle
To reset iPod shuffle:
Disconnect iPod shuffle from the computer (if connected).
Move the switch on the iPod shuffle to the OFF position. Note that when iPod shuffle is off, the green stripe by the switch is not visible
Disconnect iPod shuffle from the computer (if connected).
Move the switch on the iPod shuffle to the OFF position. Note that when iPod shuffle is off, the green stripe by the switch is not visible.
- Start computer and it should install the usb driver for the ipod automatically.
- Your i pod will say do not unplug so don't. then open itunes and it will be there.
I did not have to do these thing below – did not get error message and shuffle was displayed in Itunes. / LMc
Just remember to not only eject ipod from itunes but stop usb.
Go to the program icons near the clock and right click the usb icon and "safely remove hardware" will appear and click it.
Stop it and select "apple ipod". -
IPhone 4 unable to charge and USB not recognized?
Hi, I've just got my iPhone replaced because the old screen is broken.
In this new iPhone 4.
The camera rear, when I take photos, there is a slightly transparent black spot. It annoys me, but I chose to ignore.
It was fine all morning, till BAM!
This **** thing came up when I wants to charge my iPhone on my laptop.
My laptop can't recognize the iPhone. Earlier was fine (when I'm copying photos out), then later when I replug it happens.
"USB device not recognized. The LAST USB device you connected to this computer MALFUNCTIONED, and Windows does not recognize it"
This is my first time getting this warning.
Is there any way to reset the USB port, and redetect the iPhone USB?
Also, my iPhone can't be charge! I've tried different cables, different power source. None work.
I assume my cable is not broken because if it is, the my laptop wouldn't detect the USB and that annoying warning won't come up.
I've have TRIED:
Soft rest and hard reset on iPhone.
Restart/Shutdown laptop. Also, deleted Upper Filter from Registry. Removed laptop charger. Unplug all USB.
Reset all setting on iPhone.
Clean my iPhone charging port and charger adapter USB.
My iPhone left 10% of battery, and it's 3AM here. There's obviously no apple store open. There also no Genius Bar in my country.
And I've observe my battery gone down to 9% and back up to 10%. While I'm typing this, the battery goes up to 11%.
It's so so so slow. There is no "Charging" sign. Normally, the battery icon on the top right will have a plug sign thingy.
Now it doesn't show anything except for a red battery but percentage is going up so freaking SLOW!
*Also, how to update IOS to 6.1.4 (current 6.1.3)? I don't want IOS7.
Using:
Windows 8 64-bit
Fujitsu laptop
iPhone 4 IOS6
iTunes 10.7
Help me, my iPhone is dying. Theres no prob for my old iPhone, geez.Just an update:
I spent many hours last night working on my phone, and after leaving it on my docking station for a few hours, it had enough battery to turn on, though it was only a tiny bit of battery. I quickly plugged it into my PC and was able to load the backup from iTunes from about a month ago, so that it was now my phone again. However, straight away the battery died again, and I left it on the docking station all night, but it never charged. Now it no longer shows the battery sign at all, just a black screen.
Any help at all would be greatly appreciated, as i was checking out the apple website, and as my phone no longer has warrantly it's going to cost me £125 for a service which ain't cheap! -
My Iphone 3s is stuck and will not open, I have an image of a USB cord with an arrow pointing up to the Itune music Icon and my phone won't open or be recognized by itunes or my computer. What do I do now?
Try restoring it using Recovery Mode.
-
When i connect my iphone 5 to my pc using the usb cable, my device is not recognized yet when connected to a power source, it charges normally. What should i do to rectify the problem and read sth about debris being in the usb. How do i remove that?
iOS: Device not recognised in iTunes
Windows: http://support.apple.com/kb/TS1538 -
My daughters ipod touch has been disabled because of a wrong passcode. After 2 days of trying to get into Itunes, it will not help without a passcode and is not recognizing it as a device even though the computer is recognizing the USB. I know I have to do a complete recovery, but can I do this without Itunes (or Icloud)?
You cannot do this without itunes on your computer
Maybe you are looking for
-
Stacked bar chart with single group
Post Author: rt50896 CA Forum: Charts and Graphs Dear all, I have a question about stacked bar chart with one group value(normally more than one group value is ok) ex. YYYYMM PRODUCT AMT - 200601 ABC 100
-
Why is my JTable row sort is not working?
Hey all, I wrote the following code for a JTable and I'm trying to use a table sorter to sort the first column content alphabetically, for now. Later, I'd like to use the third column and sort the table's rows based on ascending dates. For some reaso
-
OCA certification in Oracle 10g
Hi , I would like to take OCA certification in Oracle 10g.I am very much new to this. please tell me all the details about this including : 1)Names of exams I have to take one by one and how many exams . 2)Where do i get good Course syllabus/Material
-
How to import cookies from an exported IE file
Can cookies be imported into Firefox directly from an IE ".txt" file? (The IE "Favorites" bookmark file came in fine.) I'm setting up a new Linux machine and don't have/want IE on it, so the ability to import data from another browser isn't much help
-
my macbook air was installed double system ,one is mac ox 10.6.7 another is windows7. the vidoe and the sound can't play together in mac system.I have tried many vidoe play tools including mplayerx and lvc etc.however, it is normal when I play the sa