'use dynamic name' and 'caching properites' options for alias table...
Hello everybody,
can anybody please explain 'use dynamic name' and 'caching properites' options for alias tables...
Thanks...
eagerly waiting for a response..
Vijay
You want to create dynamic target table name right?
You can refresh a variable like #GET_SESSION
#GET_SESSION= SELECT <%=odiRef.getSession("SESS_NAME")%> FROM DUAL
My tmp table name like TMP_#GET_SESSION
then in your package refresh #GET_SESSION variable and you can use it.
I hope this can be helpful
Thanks
Similar Messages
-
I had no problem connecting to my network and now all of a sudden I can't connect my iPad. Instead of prompting me for a password it comes back and says unable to join the network ("name") and then the option is Dismiss. Anyone else have that problem? I've gone thru all my settings and can't seem to find a way to log into my network. Don't get the option to put in my password. It just give me the name of my network and option of dismiss instead of password.
1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings -
Can I use user names and password of Microsoft Office Outlook for hyperion
I'm new to Hyperion. Can anyone tell that can I use "user names" and "passwords" of Microsoft Office Outlook for login into hyperion applications.
I'm not talking about single sign on, but want to use same user names and passwords as that in Outlook.
ANy suggestions?That depends on how your Outlook authentication is configured.
Hyperion is generally configured to authenticate against a network directory (NTLM, MSAD or LDAP). I'm not an Outlook expert, but my Outlook user ID and password is almost always my MSAD id and password (I change clients regularly, and it's almost always the same situation). So it's also usually the same as my Hyperion ID and password.
Ask your Outlook administrator whether it uses (or syncs with) MSAD, NTLM or LDAP. If the answer is yes, then you're in good shape because Hyperion can use these as well.
Hope this helps,
- Jake -
How to use dynamically column_name and column_name value in plsql procedure
hi,
how to use dynamically column_name and column_name value in plsql procedure.
for example, i have one table with column col1.i want write plsql code with dynamically execute the insert one schema to another schema.
by
sivaDECLARE
CURSOR C
IS
SELECT cc_cd
FROM TEMP1 WHERE s_flg ='A' AND b_num IN('826114');--,'709537','715484');
CURSOR D
IS
SELECT * FROM cONSTRAINTS_test ORDER BY SRL_NUM;
STMT VARCHAR2(4000);
p_target_schema VARCHAR2(30):='schema1';
p_source_schema VARCHAR2(30):='schema2';
BEGIN
FOR REC IN C
LOOP
FOR REC1 IN D
LOOP
STMT := 'INSERT INTO '||p_target_schema||''||'.'||''||REC1.CHILD_TABLE||' SELECT * FROM '||p_source_schema||''||'.'||''||REC1.CHILD_TABLE||' where '||REC1.COLUMN_NAME||'='||REC.cntrct_cd||'';
Dbms_Output.Put_Line('THE VALUE STMT:'||STMT);
END LOOP;
END LOOP;
END;
cc_cd='434se22442ss3433';
cc_t_ms is parent table-----------------------pk_cc_cd is primary key
cc_cd is column name
CONSTRAINTS_test table
CHILD_TABLE NOT NULL VARCHAR2(30)
CONSTRAINT_NAME NOT NULL VARCHAR2(30)
COLUMN_NAME NOT NULL VARCHAR2(400)
R_CONSTRAINT_NAME VARCHAR2(30)
CONSTRAINT_TYPE VARCHAR2(1)
PARENT_TABLE NOT NULL VARCHAR2(30)
SRL_NUM NUMBER(4)
CHILD_TABLE CONSTRAINT_NAME COLUMN_NAME R_CONSTRAINT_NAME CONSTRAINT_TYPE PARENT_TABLE SRL_NUM
a aaa cc_CD pk_cc_CD R cc_t_MS 1
bb bbb Cc_CD PK_CC_CD R cc_t_MS 2
bb_v bb_vsr S_NUM PK_S_NUM R bb_v 3
cC_HS_MS cc_hs_CD cc_CD PK_CC_CD R cc_t_MS 4
cC_HS_LNK cc_HIS_LNK_CD H_CD PK_HS_HCD R cC_hs_ms 5
cC_D_EMP cc_d_EMP Cc_CD PK_CC_CD R cc_t_MS 6
i want insert schema1 to schema2 with run time of column_name and column value.the column_name and values should dynamically generated
with refential integrity.is it possible?
can any please quick solution.its urgent
by
siva -
Using NIC Teaming and a virtual switch for Windows Server 2012 host networking and Hyper-V.
Using NIC Teaming and a virtual switch for Windows Server 2012 host networking!
http://www.youtube.com/watch?v=8mOuoIWzmdE
Hi thanks for reading. Now I may well have my terminology incorrect here so I will try to explain as best I can and apologies from the start.
It’s a bit of both Hyper-v and Server 2012R2.
I am setting up a lab with Server 2012 R2. I have several physical network cards that I have teamed called “HostSwitchTeam” from those I have made several Virtual Network Adaptors such as below
examples.
New-VMSwitch "MgmtSwitch" -MinimumBandwidthMode weight -NetAdaptername "HostSwitchTeam" -AllowManagement $false
Add-VMNetworkAdapter -ManagementOS -Name "Vswitch" -SwitchName "MgmtSwitch"
Add-VMNetworkAdapter -ManagementOS -Name "Cluster" -SwitchName "MgmtSwitch"
When I install Hyper-V and it comes to adding a virtual switch during installation it only shows the individual physical network cards and the
HostSwitchTeam for selection. When installed it shows the Microsoft Network Multiplexor Driver as the only option.
Is this correct or how does one use the Vswitch made above and incorporate into the Hyper-V so a weight can be put against it.
Still trying to get my head around Vswitches,VMNetworkadapters etc so somewhat confused as to the way forward at this time so I may have missed the plot altogether!
Any help would be much appreciated.
Paul
Paul EdwardsHi P.J.E,
>>I have teams so a bit confused as to the adapter bindings and if the teams need to be added or just the vEthernet Nics?.
Nic 1,2
HostVMSwitchTeam
Nic 3,4,5
HostMgmtSwitchTeam
>>The adapter Binding settings are:
HostMgmtSwitchTeam
V-Curric
Nic 3
Nic 4
Nic 5
V-Livemigration
HostVMSwitch
Nic 1
Nic 2
V-iSCSI
V-HeartBeat
Based on my understanding of the description , "HostMgmtSwitchTeam and
HostVMSwitch " are teamed NIC .
You can think of them as two physical NICs (do not use NIC 1,2,3,4,5 any more , there are just two NICs "HostMgmtSwitchTeam and
HostVMSwitch").
V-Curric,
V-Livemigration , V-iSCSI ,
V-HeartBeat are just VNICs of host (you can change their name then check if the virtual switch name will be changed )
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Missing "Add Records" and "Refresh Records" options for data sets post domain re-import
We recently had to re-install the Endeca server and as part of which had to export and re-import the data domains. Everything went fine except for the fact that newly re-imported data sets showcase just the "Manage Attributes" and the "Delete Data Set" options for an administrator login in. The previously available options to "Add Records" and "Refresh Records" beyond manage attributes/Delete Data Set are missing.
Thoughts? Is there a security setting to enable these?So are you talking about the Add Records and Reload Records options for a data set in Studio?
There are no separate security settings for these options. If a user is an application administrator (is able to edit the application), then they should have access to these options.
The options are only available for data domains created using the Provisioning Service (created by uploading a file or from the JDBC or BI Server data source from the Data Source Library).
I don't know if the process of exporting and re-importing the data domains (not sure how you did that) could somehow cause the data sets to no longer know that they were created by the Provisioning Service, in which case those options would not be enabled. -
Hi,
I am getting the below error for JXDM when using. It was mentioned in http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=6302524 that it is fixed. Still getting this error.
a) Appreciate if anyone can tell how to use the bug fix b20 that is mentioned in the above? I downloaded the latest jaxb 2.0 from this site and also from the jaxb RI(Reference Implementation and tried both).
b) Is there any workaround to get through this?
Will appreciate if any one can give advise on this.
************** Here is the error message ******************
There was this problem creating a context com.sun.xml.bind.v2.runtime.IllegalAnn
otationsException: 1 counts of IllegalAnnotationExceptions
Two classes have the same XML type name "usStateCodeType". Use @XmlType.name and
@XmlType.namespace to assign different names to them.
this problem is related to the following location:
at gov.ojp.it.jxdm.usps_states._1.USStateCodeType
at protected gov.ojp.it.jxdm.usps_states._1.USStateCodeType gov.
ojp.it.jxdm._3_0_2.proxy.usps_states._1.USStateCodeType.value
at gov.ojp.it.jxdm._3_0_2.proxy.usps_states._1.USStateCodeType
at protected gov.ojp.it.jxdm._3_0_2.proxy.usps_states._1.USState
CodeType generated.CjsAddressType.locationStateCodeUSPostalService
at generated.CjsAddressType
at protected java.util.List generated.CjsPersonType.personAddres
s
at generated.CjsPersonType
at protected generated.CjsPersonType generated.CjsSuspectType.su
spectPerson
at generated.CjsSuspectType
at protected generated.CjsSuspectType generated.CjsReportType.su
spect
at generated.CjsReportType
at public generated.CjsReportType generated.ObjectFactory.create
CjsReportType()
at generated.ObjectFactory
this problem is related to the following location:
at gov.ojp.it.jxdm.fips_5_2._1.USStateCodeType
at protected gov.ojp.it.jxdm.fips_5_2._1.USStateCodeType gov.ojp
.it.jxdm._3_0_2.proxy.fips_5_2._1.USStateCodeType.value
at gov.ojp.it.jxdm._3_0_2.proxy.fips_5_2._1.USStateCodeType
at protected java.util.List gov.ojp.it.jxdm._3_0.AddressType.loc
ationStateCodeFips52Alpha
at gov.ojp.it.jxdm._3_0.AddressType
at protected java.util.List gov.ojp.it.jxdm._3_0.LocationType.lo
cationAddress
at gov.ojp.it.jxdm._3_0.LocationType
at protected java.util.List gov.ojp.it.jxdm._3_0.OrganizationTyp
e.organizationLocation
at gov.ojp.it.jxdm._3_0.OrganizationType
at protected java.util.List gov.ojp.it.jxdm._3_0.BookingType.boo
kingAgency
at gov.ojp.it.jxdm._3_0.BookingType
at generated.CjsBookingType
at public generated.CjsBookingType generated.ObjectFactory.creat
eCjsBookingType()
at generated.ObjectFactory
Check this out
Exception in thread "main" java.lang.NullPointerException
at bpd.MakeNewItem.marshallItem(MakeNewItem.java:119)
at bpd.MakeNewItem.persistItem(MakeNewItem.java:112)
at bpd.MakeNewItem.<init>(MakeNewItem.java:31)
at bpd.MakeNewItem.main(MakeNewItem.java:137)
********************End of error message ******************
Thanks
Sat
Message was edited by:
sat_pIn Help > About > Properties:
sqldeveloper.oci.available = true -
Cannot query using both conforming and cached query result
TopLink doesn't allow me to both use conforming and cached query result at the same time.
Conforming is certainly not a superset of the [cached query result] features.
Can you confirm that it's a limitation of TopLink?
Any know workaround to end-up with the same features as using both conforming and cached query result?
Conforming is about seeing modifications you do in the same transaction. As a bonus, if you query for one object and specify at least the id as criteria because TopLink will have to check in memory anyway it can avoid going to the database.
But if I do a query like "give me employees hired before now and after 30 days ago" it's about more than one objects and about finding existance so cached query result is needed to get acceptable performance in a complex application trying to avoid the same SQL generated over and over again.Thats where the trace just ends? It doesnt look like there's any LIKE or filtering going on (with respect to the Oracle pieces anyway), apparently MSAccess simply requested the whole table.
What do you mean by 'hang' exactly? Are you sure it's just not taking a long time to complete? How long have you waited? How fast does it complete on the other environment?
ODBC tracing isnt likely to help much for that. SQLNet tracing would be better to see what is going on at a lower level. Specifically, what is going on at the network level? Is the client waiting for a packet to be returned from the database?
Is the database having a hard time processing the query, perhaps due to index/tuning issues?
Assuming that is indeed the query that is "hung", how much data does that return?
Are you able to reproduce the same behavior with that query and vbscript for example?
Greg -
Restrict the User name / Password Auto complete option for users accessing
Hi All,
Can any one know the Restrict the User name / Password Auto complete option for users accessing Portal from within and outside of Portal.
Regard's
RamaAre your referring to the browser functionality of remembering the usernames and passwords?
Thanks,
GLM -
I have purchased Wedding Style By Miracle Design - it is showing in the downloads but I can not get it into lightroom - I am using a mac and the instructions are for windows.
Return, cancel, or exchange an Adobe order
-
We have developed a desktop application using Flash software and published the same for MAC environment. When we double click on the index.app file, the application is working perfectly in Mac 10.6.7 at our office. But if the same index.app file is double clicked in Mac 10.6.7 at out clients location, its not opening. For your information the client is able to open this same application by double clicking on index.swf file. The main problem is that client is not able to open the application using index.app file at their office whereas we are able to do so at our office. Can anyone give some suggestions to sort this problem?
The most common reason is different versions of Flash, or different versions of web browsers used. Some users may elect to not have Flash installed at all because of the processor overhead of Flash. If you are going to make an application for a client, check what operating system and browser versions they are using first. Then determine if a stand alone application is required, or if they have the necessary plugins to run specific browser enhanced code.
P.S. MAC is an acronym for Media Access Control. Mac is the shorthand for Macintosh, the operating system and computers made by Apple Inc. -
Can I view photos and movies from my external hard drive? I used Time Machine and a WD Passport for backup. Since my drive on my MacBook Pro is filling up I was planning to delete some of the movies and photos. I wanted to see if I could view them from the hard drive. Thanks
Hello, eco1.
Thank you for visiting Apple Support Communities.
This sounds like you are wanting to move your iTunes media folder to an external drive and have iTunes this folder from this location. If this is the case then I would recommend taking a look at the article below.
iTunes for Mac: Moving your iTunes Media folder
http://support.apple.com/kb/ht1449
Cheers,
Jason H. -
I am using win vista and have installed itunes for my ipod shuffle four years back. now I have purchased iphone 4, and trying to reinstall itunes after uninstalling my earlier itunes i always get a message that error in installation. kindly help
You might find this article helpful: http://support.apple.com/kb/TS3694
It has the error range of 3000's which states
Errors 3000-3999 (3002, 3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the gs.apple.com server on ports 80 or 443. This may be because out-of-date or incorrectly configured security or firewall software is interfering, an old version of iTunes is installed, an entry in your hosts file redirecting requests to gs.apple.com (see error 1004 above), or because of your Internet proxy settings. If you are using a proxy, try without using one or with a known-good network. If that does not resolve the issue, follow iTunes for Windows: Troubleshooting security software issues. Error 3014 may indicate that you need to free up more disk space on the computer before trying to restore again. Error 3194 most likely indicates you do not have the latest version of iTunes installed Update to the latest version of iTunes. -
Hello, I am a user of the iPhone is not the place for bi çıkıcak turkey apple brand products and product support and equipment does not work as it used to fix and send back waiting for your help. Please support me in this regard quit
We are all iphone users just like you.
Do you have a question for fellow iphone users? -
Can I use my Student and Teacher Edition software for commercial use?
Can I use my Student and Teacher Edition software for commercial use?
Hi germini,
Yes, Student and Teacher Edition products can be used commercially on your privately owned computer. They may not be resold.
See - Education FAQ
^Ani
Maybe you are looking for
-
I did the software update, and upon restarting the speaker in the dock is off, and in the system preferences I am not allowed to uncheck the mute. Using the keyboard buttons doesn't work either.
-
JDBC Sender Adapter, Update statement
Hi ALL, I have a JDBC to proxy scenario. We have stored procedure in the database that executess and sends the data to SAP. Also the same store procedure updates the field Status_ID to distinguish between read and unread records. Status_ID
-
How to write formulas based on text of columns in another table
We have thousands of formulas stored in a table 'Formulas'. How can we calculate values from a data table 'D1' based on the formulas in 'Formulas' Table 'D1' has columns: V1 V2 V3 V4 V5 with standard numeric data. Table 'Formulas' has columns Date an
-
Hi, 1. Iam new to ABAP , How should i sort out the topics in ABAP,i mean which topics to learn step by step 2. How to improve my programming skills and which links or materials good for learning ABAP 3. Which institutes are best in
-
How to abort the deployment of an application
We have deployed an application. However this deployment is running several days now. Is there a way to abort this deployment? Edited by: user610622 on Apr 22, 2009 10:13 AM