Use image to trigger event

this is what i want to do:
the client has a page of mp3s from their radio show.
they'd like the visitor to be able to play them.
instead of a page full of soundcloud files, i'd like to have an image be the soundcloud file, and when licked the mp3 will beging to play, and when clicked again the mp3 will pause.
is there a way of doing that in muse?
is there a better option than soundcloud (if i can't hide the mp3 player, i'd like it to be as small as possible - soundclouds is just a little too big.
i've tried placing the soundcloud file behind an image, with the 2nd, 3rd and 4th staes of the image being 100% transparent, but being on top the soundcloud player cannot be accessed.

Hi,
I'm afraid that it is not possible in Muse as of now. I would appreciate if you can add it to the ideas section here, http://forums.adobe.com/community/muse/ideas
Regards,
Abhishek Maurya

Similar Messages

  • Can i use references to trigger events for objects?

    Hi,
    I have about thirty front panel buttopn controls on my user interface. They are all very spread out so I cannot put them all into a cluster. I have created a reference for each one and put them into an array. Each one of the buttons when pressed I want to trigger the exact same event on an event structure, but dont want to have to create 30 duplicate event cases for each button? any ideas how I can group them so that they trigger the same case?
    regards

    Mike is right, the label of the event is taken from the label of the wire, typecasting this gives you the ability to rename.
    Here's the code for anyone interested:
    Ton
    Message Edited by TonP on 08-26-2008 05:48 PM
    Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
    Nederlandse LabVIEW user groep www.lvug.nl
    My LabVIEW Ideas
    LabVIEW, programming like it should be!

  • Will the assignment of image to a parked document trigger event FIPP.Change

    Hi All,
    We are developing a workflow that has some integration with SAP ArchiveLink. The workflow waits for a scanned image to be assinged before the Parked Document can be released. For this i'm using a wait for event step that waits till the event FIPP.Assigned is raised. And once the event is received the release process is carried out.
    Will the assignment of image trigger event FIPP.Changed? If yes, how do I determine whether an image is assigned or not to a Parked Document? Can I determine by looking at the link table TOA01?
    Please let me know your thougths.
    Thanks,
    Mustajab

    I would think it will not - but why don't you turn on the event trace (SWELS) and find out (SWEL). Image.Assigned is more likely to be triggered.

  • How to delete all those images of an event "in one go" which were not used in a foto book of that event?

    How to delete all those images of an event "in one go"
    which were not used in a foto book of that event?

    To select multiple photos in an event for deletion hold down the Command key and click on those you want to delete.
    OT

  • Whats is the use of SM64 Tcode?? and about Trigger Event???

    Hi
    Whats is the use of SM64 Tcode?? and about Trigger Event???
    Can anyone tell me??
    Thanks & Regards
    Senthil

    Hi,
    When scheduling a background job, you can specify it to start "after event".
    If you do so, you'll have to create an event in SM62.
    If a job is scheduled after event event and you trigger the event with SM64, the job will start.
    Events can be raised by external systems in SAP by sending a command to a SAP application server. You can also raise event in any program using function mosule BP_EVENT_RAISE.
    hope this helps....
    Olivier.

  • Standard FM to trigger events using planning book macro

    Hi Folks,
    I'm wondering if there is a standard FM that would allow me to raise event through the use of pb macro?
    I know how to acheive it through custom FM but I would like to know if there is any standard sap solution available for the same.
    Thanks

    Hello,
    It is not clear to me what do you want to do. Do you want to trigger an event from using a Macro in the Planning Book?
    You can create a User function Macro (I suppose this is what you said that you want to avoid).. please read this note:
    631499
    - Using the user function Macro
    Other option is to raise events using function BP_EVENT_RAISE. Check this thread:
    User function macro to trigger events
    Kind Regards,
    Mariano

  • Change image resolution using image events

    Does anyone have an applescript to change image resolution using image events in OSX? I want to optimize my images for iWeb. I want to use a shell script in an applescript as a droplet or as a service in Automator. I'd like to leave the original intact.

    No? Oh...ok den. No Applescripts at all.

  • Applescript to change image resolution using image events

    Does anyone have an applescript to change image resolution using image events in OSX? I want to optimize my images for iWeb. I want to use a shell script in an applescript as a droplet or as a service in Automator. I'd like to leave the original intact.

    For what type of use in iWeb are these photos intended? If it's for adding to a page (not a photo or album page) iWeb does a great job of optimizing. See my post in this topic: Re: Photo Resolution in iWeb.
    You can optimize an entire site with an application like Web Site Maestro. It can reduce the site's size by up to 49%. Here's the settings available for the optimization:
    Click to view full size
    It's very effective.
    OT

  • No "before new record saved" trigger event in workflow definition ?

    Hello,
    I have following problem: I have to make a simple integration, where products have information about available quantity of given product . Assume we have field - it is called "Available amount" and it tells how many products are on stock. Now suppose we have created an opportunity, and we want to add Opportunity Product Revenue - we're selecting product and then quantity. I want to make OCOD to display message and prevent from adding opportunity product revenue, when its quantity is greater than "Available amount" field which is present in associated product record. I've created small C# application and used workflows to create Integration events. It works - but not exaclty how I want it - when I add a new record the workflow generates integration event - but I'd like to generate integration event before a record is created, also I'd like to show a notification from OCOD. But for "revenue" we do not have a trigger event called for example : "before new record saved" - we have only "when new record saved" and "before modified record saved".

    Hi,
    From your requirement, it seems you, want some kind of check. Did you try puting this validation on field level, i guess you would need to join fields and compare in field validation. So, whenever user creates a new record this validation kicks and user is notified of the error.

  • Thumbnail images in the event browser

    After about 20 minutes on FCPX the thumbnail images in the event browser randomaly disappear. If I move the scrubber bar over the blank thumbnail the image reappears but only for as long as I linger on the thumbnail. The audio track remains visible all the time. Changing the view or the scale doesn't help. It's difficult to find clips, as you can imagine. Anyone else having this problem? 

    Thanks Russ. After returning to original layout the problem subsided but returned after a longer time period (about two hours). I was just working (on a different project) and suddenly %90 of the thumbnails turned blue. I could still see the audio information but the pictures vanished. The picture returns when the scrubbing bar hovers over the thumbnail then disappears again when I take the bar away. This is incredibly frustrating. Could it be because I'm using a thunderboldt display off of my Mac Book Pro? Both are less than 1 year old and the Pro is (was) top of the line at the time. Blind as a bat. 

  • Problem of trigger event for Customer master.

    Hi all,
    I created one object type in KNA1. because i want to use task instead of the workflow.
    after i executed the customer master creation , i got this error during the execution."Dereferencing of the NULL reference".
    if anybody want information, please let me know.
    Regards,
    Luke

    Hi
    "At the beginning, i am using the Receiver Function module is SWW_WI_CREATE_VIA_EVENT.
    after i change to "SAP_WAPI_CREATE_EVENT" but got error too."
    Can you tell us where are you calling this FM (is it via Enhancement option or badi or exit) to trigger the event?
    Just leave the Receiver FM as same as in SWE2 and make sure Linkage Actiavted check box is checked
    "i can't do the buiding between &EVT_OBJECT& and &WI_OBJECT_ID&. because it is not same business object.
    for our workflow object, it references to class is developed by me.
    As suggested by Rick, you could make use of FM or as per blog, you could use class to trigger your custom class's event. Then you need to have binding at task level (PFTC)
    &EVT_OBJECT& --> &WI_OBJECT_ID&.
    Vinoth

  • Some clips have no more images in the events library

    Hello,
    Sorry for my english, I am French.
    Some clips have no more images in the events library. The image appears only when I am on it. Do you know why ? I think this is a bug, very annoying.
    Thank you by advance,
    Best,

    Didier Rykner wrote:
    What means "deleting preferences" ?
    The preferences you set in Final Cut Pro->Preferences (like whether to use proxy, etc) are kept in some specific files in your mac.
    This is common for all programs.
    Sometimes these files become corrupt. When that happens often the program behaves badly, sometimes in completely unexpected ways.
    Deleting them makes FCP X create new clean versions, and if this corruption was the cause, your problems may be fixed. Note that this does not in any way alter FCP X or your projects, so it is completely harmless, even if it does not solve anything.
    The easiest way to delete preferences is to download and use Preference Manager, which is free from Digital Rebellion.

  • How to use image load gif of 「GIF87a」 by ByteArray ?

    Hi all:
    I want use image load gif file of 「GIF87a」 by ByteArray, but it not be displayed correctly on the screen, How can I do it , or How to conver 「GIF87a」 to 「GIF89a」 ?
    private function onButtonClick():void {
        fileRef.browse([new FileFilter("Images", "*.jpg;*.gif;*.png;*.swf")]);
        fileRef.addEventListener(Event.SELECT, onFileSelected);
    private function onFileSelected(e:Event):void {
        fileRef.addEventListener(Event.COMPLETE, onFileLoaded);
        fileRef.load();
    private function onFileLoaded(e:Event):void {
        var bytes:ByteArray = e.target.data;
        imageLoader.source = bytes;
    <mx:Image  id="imageLoader" onclick="onButtonClick()">

    Hi zhaojie198281,
    I've made a small modification on your code and it works fine. Try the following code,
    <?xml version="1.0" encoding="utf-8"?>
    <s:WindowedApplication xmlns:fx="http://ns.adobe.com/mxml/2009"
            xmlns:s="library://ns.adobe.com/flex/spark"
            xmlns:mx="library://ns.adobe.com/flex/mx"
            width="900" height="400">
    <fx:Script>
      <![CDATA[
       private var fileRef:FileReference = new FileReference();
       private function onButtonClick():void {
        fileRef.browse([new FileFilter("Images", "*.jpg;*.gif;*.png;*.swf")]);
        fileRef.addEventListener(Event.SELECT, onFileSelected);
       private function onFileSelected(e:Event):void {
        fileRef.addEventListener(Event.COMPLETE, onFileLoaded);
        fileRef.load();
       private function onFileLoaded(e:Event):void {
        var bytes:ByteArray = e.target.data;
        imageLoader.source = bytes;
      ]]>
    </fx:Script>
    <fx:Declarations>
      <!-- Place non-visual elements (e.g., services, value objects) here -->
    </fx:Declarations>
    <s:layout>
      <s:VerticalLayout paddingTop="10" paddingLeft="10"/>
    </s:layout>
    <s:Button label="Load!" click="onButtonClick()"/>
    <mx:Image id="imageLoader"/>
    </s:WindowedApplication>

  • WebDynpro ABAP tree node collapse trigger event of row selection

    Hello expert,
    I have a table in my WD abap view, I use MasterColumn to display the tree structure, everything works just fine.
    However I encounter one problem:
    If I open the tree structure and select one node (table row selection), the event onLeadSelectis triggered, this is correct. However if I collapse any  parent nodes (along the tree path) of the selected node, WD puts the selection on the clicked parent and thus the event onLeadSelect is triggered for the parent. This is a strange behavior, because when I collapse a node, I certainly don't want to trigger the onLeadSelect event for the node, becaseu this would invoke the function linked to the event which is only supposed to be triggered when you explicitly select the table row.  (BTW, if you don't select any child nodes, then collapse the parent, it does NOT trigger the event).
    I've looked into the wdevent data to see if I can differentiate between the event of node collapsing and row selecting, event data is exact same for both cases, thus I have no way to stop the event handler in case of node collapsing.
    Anyone had this issue and a solution for this?
    Thanks
    Jayson

    Hi Jayson,
    Its the behavior of the tree element, the lead selection of child is carried over to the parent.
    Whenever there is lead selection set and on toggling of tree node, first OnToggle event triggers and then OnLeadSelect triggers. So you can control the execution of onLeadSelect by using EXPANDED parameter of event OnToggle.
    Please refer the below steps:
    Create an action ON_TOGGLE for the vent OnToggle of tree element and it will be having parameter EXPANDED
    Create an attribute in view-->attributes tab GV_EXPANDED
    Collect the parameter EXPANDED into gv_expanded
              wd_this->gv_expanded = expanded.
    Now, you can use wd_this->gv_expanded to control the execution of LEADSELECT logic
    Hope this helps you.
    Regards,
    Rama

  • Why wont the images of my events show up in my project???

    Every time i start up final cut pro x my current project is completely fine. After i start working on it and moving events around in the project all of the images in the events that i have put in my project don't show up, load or re appear at all. No idea why this is happening, i even tried freeing up hardware space and deleted alot of events in my event library, by the way i just bought final cut pro x and this happened within 2 days of using it, please someone help!!!!!!!!!!!!!!!

    Have you tried trashing the preferences?
    Many weird things happen as a result of corrupt preferences which can create a vast range of different symptoms, so whenever FCP X stops working properly in any way, trashing the preferences should be the first thing you do using this free app.
    http://www.digitalrebellion.com/prefman/
    Shut down FCP X, open PreferenceManager and in the window that appears:-
    1. Ensure that only  FCP X  is selected.
    2. Click Trash
    The job is done instantly and you can re-open FCP X.
    There is absolutely no danger in trashing preferences and you can do it as often as you like.
    The preferences are kept separately from FCP X and if there aren't any when FCP X opens it automatically creates new ones  .  .  .  instantly.

Maybe you are looking for