Use of "Cache" component in developer studio pipeline diagram

Hi Everyone,
         Please provide me the exact information on, " In which scenario we are going to use "Cache" component in developer studio pipeline diagram generation ". I did the go through of entire DevStudioHelp guide but unable to understand the basic difference between " Assembler" and "Cache" component in real time scenario.
         What is necessity of using Cache , (As Assembler doesn't support any of the join excluding "Switch" or anything else)
          If that is the case then why we are using assembler as subsequent component after cache in pipeline diagram.
Thanks,
Swap

You need a cache for most join scenario. For instance to make a left join
You configure the assembler as a left join. But one of it's Stream (record adapter) must be connected to a cache.
I suggest you read "Oracle Endeca Platform Services Forge Guide". You have a complete procedure.
hope this help

Similar Messages

SQL Server Business Intelligence Development Studio query designer not supported in SQL SERVER 2008 R2

Hello I am using the SQL Business Inteligence Development studio that comes with SQL 2008 R2. However whenever i try using the graphical query builder It throws an error stating that the server i am connected is not supported. Only SQL servers from
2005 downwards are supported. dunno whats going on

Hi ,
It should not be . Did you create the data source for that server ? Test the connection . In design view add the data source which will be reference to share data source .I am not sure you were able to create data set perfectly ..
Let me know the specific error . I will help you out.
Thanks

NWDS: NetWeaver Development Studio

Hi,
I begin to learn to create a Java mapping and I have a question about NWDS.
Our NWDS uses the version 2.1.2 of Eclipse.
Is it normal?
Is there a mean to use the version 3.0? (more user-friendly)
Thanks
Mickael

Hi Mickael,
Please post this question on the portal and application server forums-you will get a better response:-)...btw, here are some threads which have discussed the same question:-
eclipse version of netweaver developer studio
Using Eclipse plugins with Netweaver Developer Studio
Eclipse Release of Netweaver Studio and other plugins
Regards,
Sushumna

Netweaver Developer Studio JSPDynPage

I am developing a small app using JSPDynPage. when i try to open the JSP page in the pagelet folder. Instead of opening the file in the editor, its asking for whether i want to save it or open the file.If i say open it opens in a notepad, if i say cancel I am getting the below message.i can see the source code when i click the source tab. I am using demo version of Netweaver developer studio. I think it s not finding right editor to open.
Action canceled
Internet Explorer was unable to link to the Web page you requested. The page might be temporarily unavailable.
Please try the following:
Click the Refresh button, or try again later.
If you have visited this page previously and you want to view what has been stored on your computer, click File, and then click Work Offline.
For information about offline browsing with Internet Explorer, click the Help menu, and then click Contents and Index.
Thanks,
Sujatha

The problem has probably been caused by a file association made outside of Netweaver i.e. opened a .JSP file with notepad in Windows.
Deleting the association with .JSP files in the control panel should remedy the problem.
If you can't delete it using the normal method (through control panel, folder options, File types), remove the association by editing the registry.
As soon as I deleted the association it worked fine again.
Changing the file associations within Netweaver itself didn't work as it seems to rely on the association in the Windows registry. To change your editor in Netweaver use Window > Preferences > Workbench > File Associations.
Hope this helps anyone who encounters the problem.
Cheers,
Rob.

Distributed cache in custom developement.

Why it is not recommended to use distributed caching in custom development in SP2013? Is there a reason, other than the concern of overwriting the cache used by SharePoint?
If that would be the concern, any precautions we can take to overcome it?

I think without a scope and priority defined for SharePoint named caches, custom named caches in SharePoint Distributed Cache cluster may evict SharePoint named caches if their usage is higher than that of SharePoint. I think the eviction algorithm is
based on 2 criteria: the named caches which has been accessed for the least number of times or named caches which were not accessed for the longest time.
This post is my own opinion and does not necessarily reflect the opinion or view of Slalom.

Standalone Proxies for Web Services : Developer Studio 7.0.12 & SAP PI7.1

Dear Experts,
We are trying to consume SAP PI 7.1 WebServices using an EAR deployed on SAP NetWeaver 7.0.
Unfortunately, we face the following issue using the WebService plugin of Developer Studio (based on SP12).
The idea consists of generating a standalone proxy we can reuse as library in our EAR (we haven't tried the deployed proxy yet) but the generated code looks wrong. No issue neither during build nor during deployment but an HTTP 500 during the execution of the proxy. Actually, the stub inherits from the JAXR stub trying to execute an _init method which doesn't exist (according to the error message).
It looks like having a generated code which doesn't fit with the NetWeaver Developer Studio librairies. Did someone face this issue in the past? How can we solve it or could someone tell me the version of the JAXR library we must use with the standalone proxy generated with this NetWeaver Studio version? Are my assumptions wrong?
Thanks for your help and Best Regards,
Ludovic Fernandez

Hi,
"Cannot allocate memory" bit common problem in the installation solution for this is just stop the installation connect to database and stop the database and start the database and restart the installation follow the steps to stop the database
1. Logon as orasid user
2. sqlplus/no log
3. connect / as sysdba
4. shutdown immediate
to start startup
Regards,
Rakesh

Certification for NetWeaver Developer Studio 7.0

Hi
Are there J2EE migration toolkits certified for use as part of NetWeaver Developer Studio 7.0 ?
Rephrased another way, is there a way to use NetWeaver Developer Studio 7.0 to migrate J2EE 1.3 applications to higher versions of J2EE ?
Hong Hua

Hello Jon,
I agree, but 2 GB RAM is sufficient to run the NWDS efficiently, consider the following points to increase its performance.
1. Tweak your eclipse.ini : This will increase the memory usage of Eclipse, but will give you the best startup and working performance. If you think eclipse is using up too much memory, lower the Xms, Xmx and PermSize values.
-startupplugins\org.eclipse.equinox.launcher_1.0.101.R34x_v20080819.jar--launcher.XXMaxPermSize256m-vmargs -Xms256m -Xmx512m -XX:PermSize=256m -XX:MaxPermSize=256m -XX:+AggressiveOpts-XX:+StringCache-XX:+UseFastAccessorMethods-XX:+UseLargePages-XX:LargePageSizeInBytes=4m-XX:AllocatePrefetchLines=1-XX:AllocatePrefetchStyle=1-Dide.gc=true
2. Disable the un-necessary startup plugins
It loads up certain (un-necessary) plugins at startup. We can tweak this a bit to improve the startup performance.
Go to Window > Preferences
Expand General and select Startup and Shutdown
On the right side, uncheck the plugins you don't want to start. Usually, you can uncheck all of them. Don't worry, it just makes the startup minimal. Once you need to access the module in the IDE, it will start it up.
Click OK and restart IDE.
BR
Satish Kumar

Steup Developer Studio with wine??

I tried to use Wine to install the developer studio on my Linux system. But unfortunately the JDTSetup.exe stops immediately with an error message.
Has anybody running the Dev Studio on Linux? If yes, how?

Hi Jan,
Yes, on the NW4 LinuxLab Testdrive DVD Codewavers Crossover Office was shipped. The Netwaver Developener Studio also shipped on this DVD works fine with Crossover Office. More information can be found here: http://www50.sap.com/linux/eval/nw4/
Cheers,
Hannes

Use the NetWeaver 7.1 CE Developer Studio at NW 7.0 PORTAL

Hi NW Experts,
I have a SAP NETWEAVER 7.0 portal running and need to develop a Web Dynpro
Java application. Is it therefore possible to use the new SAPNWCE71TrialSP1Preview_DevStudio? Or do I have to stay on the old
developer studio- NW_DS_700SP14; In the new CE developer studio there are a
few new components I would need for my development;
When I try to deploy with the SAPNWCE71 to the portal I get the following exception:
03.04.2008 07:50:41 /userOut/daView_category (eclipse.UserOutLocation) [Thread[Deploy Thread,5,main]] INFO:
[001]Additional log information about the deployment
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[1.5.3.7185 - 630]/>
<!NAME[D:\usr\sap\EPA\JC00\SDM\program\log\sdmcl20080403055142.log]/>
<!PATTERN[sdmcl20080403055142.log]/>
<!FORMATTER[com.sap.tc.logging.TraceFormatter(%24d %s: %m)]/>
<!ENCODING[Cp1252]/>
<!LOGHEADER[END]/>
Apr 3, 2008 7:51:42 AM   Info: -
Starting deployment -
Apr 3, 2008 7:51:42 AM   Info: Error handling strategy: OnErrorStop
Apr 3, 2008 7:51:42 AM   Info: Prerequisite error handling strategy: OnPrerequisiteErrorStop
Apr 3, 2008 7:51:42 AM   Info: Update strategy: UpdateAllVersions
Apr 3, 2008 7:51:42 AM   Info: Starting deployment prerequisites:
Apr 3, 2008 7:51:43 AM   Info: Loading selected archives...
Apr 3, 2008 7:51:43 AM   Info: Loading archive 'D:\usr\sap\EPA\JC00\SDM\program\temp\temp7122KapPlan.ear'
Apr 3, 2008 7:51:43 AM   Info: Selected archives successfully loaded.
Apr 3, 2008 7:51:43 AM   Info: Actions per selected component:
Apr 3, 2008 7:51:43 AM   Info: Update: Selected development component 'KapPlan'/'local'/'LOKAL'/'0.2008.04.03.07.49.58'/'0' updates currently deployed development component 'KapPlan'/'local'/'LOKAL'/'0.2008.04.02.18.04.14'/'0'.
Apr 3, 2008 7:51:44 AM   Info: Ending deployment prerequisites. All items are correct.
Apr 3, 2008 7:51:44 AM   Info: Saved current Engine state.
Apr 3, 2008 7:51:44 AM   Info: Starting: Update: Selected development component 'KapPlan'/'local'/'LOKAL'/'0.2008.04.03.07.49.58'/'0' updates currently deployed development component 'KapPlan'/'local'/'LOKAL'/'0.2008.04.02.18.04.14'/'0'.
Apr 3, 2008 7:51:44 AM   Info: SDA to be deployed: D:\usr\sap\EPA\JC00\SDM\root\origin\local\KapPlan\LOKAL\0\0.2008.04.03.07.49.58\temp7122KapPlan.ear
Apr 3, 2008 7:51:44 AM   Info: Software type of SDA: J2EE
Apr 3, 2008 7:51:44 AM   Info: ***** Begin of SAP J2EE Engine Deployment (J2EE Application) *****
Apr 3, 2008 7:51:45 AM   Info: Begin of log messages of the target system:
08/04/03 07:51:44 - ***********************************************************
08/04/03 07:51:44 - Start updating EAR file...
08/04/03 07:51:44 - start-up mode is lazy
08/04/03 07:51:44 - EAR file updated successfully for 125ms.
08/04/03 07:51:44 - Start updating...
08/04/03 07:51:44 - EAR file uploaded to server for 47ms.
08/04/03 07:51:44 - Successfully updated. Update took 438ms.
08/04/03 07:51:44 - Deploy Service status:
08/04/03 07:51:44 -    Application : local/KapPlan
08/04/03 07:51:44 -
08/04/03 07:51:44 -    webdynpro/resources/local/KapPlan - WEB
08/04/03 07:51:44 - ***********************************************************
Apr 3, 2008 7:51:45 AM   Info: End of log messages of the target system.
Apr 3, 2008 7:51:45 AM   Info: ***** End of SAP J2EE Engine Deployment (J2EE Application) *****
Apr 3, 2008 7:51:45 AM   Warning: Finished with warnings: development component 'KapPlan'/'local'/'LOKAL'/'0.2008.04.03.07.49.58'/'0':
Caught exception during application startup from SAP J2EE Engine's deploy service:
java.rmi.RemoteException: Error occurred while starting application local/KapPlan and wait.
Reason: Clusterwide exception: server ID 3705850:com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Application local/KapPlan cannot be started. Reason: it has hard reference to resource tcwdapi with type application, which is not active on the server.
     at com.sap.engine.services.deploy.server.ReferenceResolver.processReferenceToApplication(ReferenceResolver.java:597)
     at com.sap.engine.services.deploy.server.ReferenceResolver.processMakeReference(ReferenceResolver.java:399)
     at com.sap.engine.services.deploy.server.ReferenceResolver.beforeStartingApplication(ReferenceResolver.java:328)
     at com.sap.engine.services.deploy.server.application.StartTransaction.beginCommon(StartTransaction.java:162)
     at com.sap.engine.services.deploy.server.application.StartTransaction.begin(StartTransaction.java:136)
     at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:292)
     at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesImpl(ParallelAdapter.java:342)
     at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:126)
     at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:245)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:4761)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:4666)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:4639)
     at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:1163)
     at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320)
     at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198)
     at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.sap.engine.services.deploy.container.DeploymentException: <Localization failed: ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle', ID='Exception while starting: sap.com/tcwdapi', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key Exception while starting: sap.com/tcwdapi
     at com.sap.portal.prt.sapj2ee.PortalRuntimeContainer.prepareStart(PortalRuntimeContainer.java:527)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationLocalAndWait(DeployServiceImpl.java:4415)
     at com.sap.engine.services.deploy.server.ReferenceResolver.processReferenceToApplication(ReferenceResolver.java:589)
     ... 21 more
Caused by: com.sap.engine.services.deploy.container.DeploymentException: <Localization failed: ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle', ID='Exception while starting: SAPJ2EE::local/KapPlan', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key Exception while starting: SAPJ2EE::local/KapPlan
     at com.sap.portal.prt.sapj2ee.SAPJ2EEPortalRuntime.getAndStartSAPJ2EEApplicationItem(SAPJ2EEPortalRuntime.java:886)
     at com.sap.portal.prt.sapj2ee.PortalRuntimeContainer.prepareStart(PortalRuntimeContainer.java:511)
     ... 23 more
Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: [ExternalApplicationItem.prepare]: SAPJ2EE::local/KapPlan
     at com.sapportals.portal.prt.core.broker.ExternalApplicationItem.prepare(ExternalApplicationItem.java:188)
     at com.sapportals.portal.prt.core.broker.SAPJ2EEApplicationItem.prepare(SAPJ2EEApplicationItem.java:232)
     at com.sapportals.portal.prt.core.broker.SAPJ2EEApplicationItem.start(SAPJ2EEApplicationItem.java:192)
     at com.sapportals.portal.prt.service.sapj2ee.Mediator.getAndStartExternalApplication(Mediator.java:132)
     at com.sap.portal.prt.sapj2ee.StartPortalApplication.coreRun(StartPortalApplication.java:59)
     at com.sap.portal.prt.sapj2ee.SAPJ2EEPortalRuntime.getAndStartSAPJ2EEApplicationItem(SAPJ2EEPortalRuntime.java:882)
     ... 24 more
Caused by: com.sapportals.portal.prt.core.broker.PortalApplicationNotFoundException: Could not find portal application tcwdapi
     at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:415)
     at com.sapportals.portal.prt.core.broker.ExternalApplicationItem.prepare(ExternalApplicationItem.java:180)
     ... 29 more
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
Apr 3, 2008 7:51:45 AM   Info: Starting to save the repository
Apr 3, 2008 7:51:45 AM   Info: Finished saving the repository
Apr 3, 2008 7:51:45 AM   Info: J2EE Engine is in same state (online/offline) as it has been before this deployment process.
Apr 3, 2008 7:51:45 AM   Warning: -
At least one of the Deployments finished with warning(s) -
>>> ROOT CAUSE
Reason: it has hard reference to resource tcwdapi with type application, which is not active on the server.
>>>
It seems that the resource tcwdapi is missing; i cannot find this resource in the
VA on the portal; Is this resource specific to the CE?
Thanks before for your help! I would be glad for any recommandaations by your side;
Kind regards,
Peter

Hello Peter,
as far as I know you cannot "downgrade" from WD 7.1 to 7.0.
An upgrade from NW 7.0 to 7.1 very much depends on the components installed. If you're using MSS, BI, MDM or any other of the software components which run on 7.0 an upgrade will not be possible. In such cases I suggest that you kepp your 7.0 portal as your primary portal, run your application on the 7.1 portal and link them together via the federated portal network.
Of course the disadvantage is that you need to maintain a separate portal for a certain time - not very nice.
Hope this helps.
Stefan

Developer studio does not update pipeline

Hi
I created my first Endeca app, called testapp2.
The app seems correctly provisioned, then I created a project in developer studio with the same name of the app.
I issue "set instance configuration" and it seems sto work , but in /app/oracle/product/endeca/apps/testapp2/config/pipeline the file ar not updated.
The strange things is that if I make a change in the project, the I revert back by issuing "get instance configuration" the previous configuration is correctly loaded in the project. This gives me the idea that configuration are strored somewhere but not where I am looking to.
Any Idea?
Regards
Giuseppe

That isn't what set instance configuration does, that is why it doesn't work - you are using a utility to update a completely separate piece of software called Merchandising Workbench.
If you want to apply changes to the configuration to a different server you would copy the changed pipeline directory there. I.e. if you are editing the pipeline on your local PC, say in C:\Endeca\applications\testapp2\config\pipeilne, you would change things in Developer Studio, click the Save button, then open up whatever you use for file copies and copy the contents of C:\Endeca\applications\testapp2\config\pipeline\* to /app/oracle/product/endeca/apps/testapp2/config/pipeline. Then you would run a baseline via /app/oracle/product/endeca/apps/testapp2/control/baseline_update.sh.
Michael

Creation of custom page without using NetWeaver Developer Studio

Hi Experts,
In my project, we have not installed NetWeaver Developer Studio. We are using EP 7.0.
We have to create a custom page for the project. In this page, we have to provide seperate iViews links.
The page should look like this:
iView 1 - Link                iView 2 - Link        iView 1 - Link
Help iView 1-Link        Help iView 1-Link     Help iView1-Link
I tried to do so by creating a page. In the page, I tried to use 'Three Coloumn Page' layout. The iviews are getting displayed in following way:
iView 1 (iView is getting displayed .Link not getting displayed)
Help iView 1 (iView is getting displayed .Link not getting displayed)
iView 2(iView is getting displayed .Link not getting displayed)
I can not display link of all six iViews. Further more iViews are getting displayed in one coloumn and 3 rows. I can see the iViews directly. I am not able to display links for iViews.
I need 3 coloumns and 2 rows layout.
Can you please let me know how to achieve this?
Whether I have to create new layout? For this whether we will need NetWeaver Developer Studio?
Can we do it by creating HTML page. In the HTML page, we will have many links. These links will point to the iViews stored in SAP EP's KM. If so, what be the steps?
I know that it can be done by creating a PAR file and deploying it. But, we don't have Netweaver Developer Studio.
Can we acheive above without using NetWeaver Developer Studio?
Please help me.
Regards,
Brian

Hi Kedar,
Thanks. My requirement is that six iViews links should be shown in the portal content area.
The iViews links should be like
iView 1-Link         iView 2-Link           iView 3-Link
Help iView 1-Link Help iView 2-Link    Help iView3-Link
When user will click on any iView link, the relevant iView should be displayed. The iView can be displayed in seperate new page. So naturally five iView link will not be displayed.
I am planning to create one HTML page and store it in KM. I will call this page in portal content area.
There will be hyperlink on this HTML page. The hyper link will be attached to other iView links in KM.
Whenever user will click on any Help link or iView link the corresponding iView will be called from KM.
So in KM we will store 7 objects. 3 HTMLpages for help. 1 HTML page for main page.
Other 3 will point to iView-Link1, iView-Link2 and iView-Link3.
Can I do so? Will it sort out my problem?
Thanks

Error when using a plugin from Developer Studio

Hi,
When trying to use VSS plugin from Developer Studio v2.0.14, I receive the error: "800401f3: Invalid class string".
Does anyone received the same error in a similar situation and know how to fix it?
Thank you in advance,
Janina

Hi Janina,
First check whether you have the correct version of the plugin for the NWDS. Reason is, different versions of plugins exist for different versions of Eclipse. I wasn't able to find a version for Eclipse 2.0, may be it is hidden somewhere in the internet
If you couldn't find the correct version then you need to manually Check-in and check-out the files from the VSS client outside the Eclipse IDE.
Best regards,
Guru.
PS: Award points for replies.

Complex return message on WSDL using Netweaver Developer Studio 7.0.1

Hi All,
We are going to do a Web Service using Netweaver Developer Studio 7.0.1(jdk 1.4), that has to return a complex type
message. The Web service works fine on WS Navigator but when importing Its RPC WSDL version on Xcelsius
only the root field of the complex message is displayed as an output value.
Is there any best practice or document that describe "how to do a Web Service" returning a complex type message
using Netweaver Developer Studio 7.0.1?
P.S.
"On Netweaver Developer Studio 7.0.1 is it possible to provide manually the WSDL instead of the auto generated one ?"
Best Regards,
Michael

Hello Jon,
I agree, but 2 GB RAM is sufficient to run the NWDS efficiently, consider the following points to increase its performance.
1. Tweak your eclipse.ini : This will increase the memory usage of Eclipse, but will give you the best startup and working performance. If you think eclipse is using up too much memory, lower the Xms, Xmx and PermSize values.
-startupplugins\org.eclipse.equinox.launcher_1.0.101.R34x_v20080819.jar--launcher.XXMaxPermSize256m-vmargs -Xms256m -Xmx512m -XX:PermSize=256m -XX:MaxPermSize=256m -XX:+AggressiveOpts-XX:+StringCache-XX:+UseFastAccessorMethods-XX:+UseLargePages-XX:LargePageSizeInBytes=4m-XX:AllocatePrefetchLines=1-XX:AllocatePrefetchStyle=1-Dide.gc=true
2. Disable the un-necessary startup plugins
It loads up certain (un-necessary) plugins at startup. We can tweak this a bit to improve the startup performance.
Go to Window > Preferences
Expand General and select Startup and Shutdown
On the right side, uncheck the plugins you don't want to start. Usually, you can uncheck all of them. Don't worry, it just makes the startup minimal. Once you need to access the module in the IDE, it will start it up.
Click OK and restart IDE.
BR
Satish Kumar

Using SN Developer Studio

Is it posible to install SN Developer Studio as plugin on Eclipse 3.0/3.1?
Does anybode know when will new version (based on Eclipse 3) available ?

Hello,
NWDS is based on eclipse 2.x platform and it's not possible to use with eclipse 3.1/2. I've heard that the next version of Web Application Server (7.0) due out sometime next year will have a Dev Studio that uses Eclipse 3.X although I'm not 100% positive.
Thanks,
Marty

Debbugging J2EE using SAP NetWeaver Developer Studio

Hi experts,
I need to debug J2EE application in SAP NetWeaver Developer Studio. How can I do it?There is something to set or activate in J2EE Engine?Thanks

http://help.sap.com/erp2005_ehp_04/helpdata/EN/a8/def86ab54da5418a3575373934ca00/frameset.htm

Use of "Cache" component in developer studio pipeline diagram

Similar Messages

Maybe you are looking for