Use of Multiple partition in multiple flash regions

I have a Windows Embedded Compact 2013 device with NAND flash. I want to have multiple Flash file systems in different flash regions. How can I configure multiple files systems in different flash regions? How should the regions look like so that they can
be mounted automatically. It works fine for one file system, but I am not able to mount a second file system in a different region automatically.
Regards
Norbert

I have changed my configuration. now I have two instances of my NAND driver and try to mount them, but the second Partition always failed to format with error 87 (invalid Parameter). Here is my Registry configuration:
[HKEY_LOCAL_MACHINE\System\StorageManager\AutoLoad\MSFlash]
        "DriverPath"="Drivers\\BuiltIn\\NAND"
        "Order"=dword:0
        "BootPhase"=dword:0
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\MSFlash]
   "PartitionDriver"="flashpart.dll"
"MountAsBootable"=dword:1
"AutoPart"=dword:1
   "EnableCache"=dword:0
   "DriverPath"="Drivers\\BuiltIn\\NAND"
   "Name"="NAND"
   "AutoFormat"=dword:1
   "Flags"=dword:1000
   "LoadFlags"=dword:1
   "BootPhase"=dword:0          ; Make NAND available in BootPhase1, to load the persisted registry
   "DefaultFileSystem"="FATFS"
   "FormatTFAT"=dword:1
   "CheckForFormat"=dword:1     ; Ask the OAL if we should format on boot (i.e. cold reset)
"Dll"="exfat.dll"
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\MSFlash\PART00]
   "Folder"="Flash"
"AutoMount"=dword:1
"AutoFormat"=dword:1
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\NAND]
"Flags"=dword:1000
    "Profile"="MSFlash"
    "IClass"=multi_sz:"{A4E7EDDA-E575-4252-9D6B-4195D48BB865}"
    "Order"=dword:0
    "FriendlyName"="TI NAND FLASH Driver"
    "Dll"="flashmdd.dll"
    "FlashPddDll"="BSP_nand.dll"
    "Prefix"="DSK"
    "MemBase"=multi_sz:"50000000","08000000"
    "MemLen"=multi_sz:"00001000","00001000"
    "Prefetch"=dword:1
   "Index"=dword:1
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\NAND2]
    "Profile"="HDProfile"
    "IClass"=multi_sz:"{A4E7EDDA-E575-4252-9D6B-4195D48BB865}"
    "Order"=dword:1
    "FriendlyName"="TI NAND FLASH Driver2"
    "Dll"="flashmdd.dll"
    "FlashPddDll"="BSP_nand.dll"
    "Prefix"="DSK"
    "MemBase"=multi_sz:"50000000","08000000"
    "MemLen"=multi_sz:"00001000","00001000"
    "Prefetch"=dword:1
   "Index"=dword:2
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\HDProfile]
"MountAsBootable"=dword:0
   "AutoPart"=dword:1
   "AutoFormat"=dword:1
    "EnableCache"=dword:0
    "DriverPath"="Drivers\\BuiltIn\\NAND2"
    "Name"="NAND2"
    "PartitionDriver"="flashpart.dll"
    "DefaultFileSystem"="FATFS"
   "FormatExfat"=dword:0
    "FormatTFAT"=dword:0
   "Dll"="exfat.dll"
   "CheckForFormat"=dword:1
   "FullFormat"=dword:1
   "SecureWipe"=dword:1
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\HDProfile\PART00]
   "Folder"="SysLog"
"AutoMount"=dword:1
"AutoFormat"=dword:1
Any Idea?

Similar Messages

Multiple flash files change when a button click using javascript function

hi.. am new in flsh...
i want to multiple flash files change when a button click using a javascript

<script>
var count=0;
function mafunct(newSrc){
    alert("hi");
var path="a"+count+".swf";
flash+='<OBJECT CLASSID="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" CODEBASE="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=6,0,29,0" WIDTH="100%" HEIGHT="100%">';
    flash+='<PARAM NAME=movie VALUE="'+path+'">';
    flash+='<PARAM NAME="PLAY" VALUE="false">';
    flash+='<PARAM NAME="LOOP" VALUE="false">';
    flash+='<PARAM NAME="QUALITY" VALUE="high">';
    flash+='<PARAM NAME="SCALE" VALUE="SHOWALL">';
    flash+='<EMBED NAME="testmovie" SRC="Menu.swf" WIDTH="100%" HEIGHT="100%"PLAY="false" LOOP="false" QUALITY="high" SCALE="SHOWALL"swLiveConnect="true"PLUGINSPAGE="http://www.macromedia.com/go/flashplayer/">';
    flash+='</EMBED>';
    flash+='</OBJECT>';
count++;
alert(path+"aa");
</script>
<button onclick="mafunct()">next</button>

Multiple flash galleries in catalyst

similar version of a question I posted earlier...
I'm using flashcatalyst and importing slideshowpro lightroom galleries (swf files that call xml files). is there a way to have flash catalyst look not just in the root directory for an SWF's xml files? I can't put multiple galleries in one catalyst file, because I can't seem to get it to look for XML files within directories.
either that, or I'd take any solution toward the end of having multiple flash galleries in a single flash site.
thanks,
aemilia

Chris, first of all, thank you so much for replying! Thank you thank you.
Yes, there is a slideshowpro.swf, and a params.xml and images.xml it seems that slideshowpro.swf wants to look in the directory of the html file, not the relative path of the swf, for the xml files. I had a long chat with slideshowpro support about this, and we tried changing the base param within the HTML file, but it didn't inherit itself all the way to the slideshow pro swf. But I digress...
I actually tried almost the same thing already, but not exactly. Tell me if this make sense:
I built the fancy swf in flash catalyst, and imported the swf in flash catalyst. (I didn't wait until flash builder). Then, knowing what little I know about flash builder, I opened the FXP there, and imported the separate folders into the project structure in the left column (I added assets/images/gallery-headshots/slideshowpro.swf, assets/images/gallery-editorial/slideshowpro.swf).
Then, I clicked on the swf in the state I was focusing on, and changed the "source" field in the right column to the *new* location of the swf within the file structure I imported. I did this simply because I didn't know enough about flash builder to import and place an swf asset myself. This didn't work, unfortunately.
Does that make any sense?
Thanks again,
Aemilia

How can we add multiple editable region in template

Hi,
My issue is when I am going to create a new template I want to add multiple editable region in template and I want to use those editable region per page wise so that in page editor I will add different text for each page for those editable region.
I can use incontxt editor to change those area for different pages although is it possible to use online editor to add different text for different pages.
I also have a plan to solve the issue ... that is also not working.
Plan is .. if we can use tag (not the default one in template), want to use different tag like {tag_headding},{tag_sidebarcontent} in template so that we can use those tag in template and fill the field in the page online editor, so when differnt page we will create we will fill those field for those tag and that will show in the front view of the site.
Please help me. I am really stuck on this issue.
Thanks in advance.
Projjwal

Hi Projjwal,
Yes, if you look at many of the commercial BC templates available the way they are getting around it is with Content Holders and multiple templates.
Now I know you will say that multiple templates is high maintenance ..... not if you use Content holders for both recurring content and unique content.
Think of Conent Holders as 'Includes' ... I have been doing it this way with templates that I build from scratch as well. Easier than you think.
And that way the client can change content such as footer information or whatever that appears on all pages without editing the template itself.
Only drawback is that if you are using Design View in Dreamweaver the content holders don't render. But other than that Content Holders are awesome.
Brad

Dynamically hide/display multiple report regions.

Hi,
I need to build a dashboard like homepage for users with multiple report regions. Users should be able to pick the regions they want and the display point for those regions.
Is this possible?
Thanks in advance

Hello Asha,
I think the "where" part would have to come from CSS. If you visit http://apex.oracle.com/pls/otn/f?p=49882:3653 you can see a couple of HTML type regions which I placed using div tags and putting something like<div class="rpt_query" id="rpt_query">in the region Header and </div> in the region footer. You can accomplish the same with Report type regions and maybe any type of region.
As for whether or not a region is shown, that can be done in the Conditional Display attributes. I do this by selecting "Value of Item in Expression 1 = Expression 2" as the Condition Type, a hidden page item as Expression 1, and a number (perhaps corresponding to check box as mentioned previously) as Expression 2. I'm actually using pseudo tabs and when a user clicks one of the tabs it changes the value of the hidden page item and submits the page to get the new region to show up.
Hope this helps,
Gregory

Multiple Form Regions with a single Save button

Hello,
Is it possible to have multiple form regions on a single page, with a single Save button that commits changes in all form regions? If so, would the forms have to be manual forms?
If that is not possible, or a bad way to go with APEX, what are my alternatives?
I am trying to avoid the user having to click through many screens to input the data. Logically each section should be in a different table, but I would like to group some of the sections together to reduce the number of pages the users need to navigate to.
Thanks in advance for your help,
Johnnie
Edited by: johnniebillings on Jun 1, 2009 9:33 PM

Hi Johnnie,
I assume that the tables are related somehow?
If so, you can create a SQL View on the joined tables (making sure that you have a unique ID for each record in the view that can act as the Primary Key), base the form on that view and then use an INSTEAD OF trigger on the view to populate the individual tables.
Andy

How can I combine multiple flash banners

I have multiple flash banners for specific product pages and
would like to combine them to play in order for the main product
page. What is the easiest way to do this?

you could put them in a MC on the timeline and call to a
frame label of the banner that cooresponds with the current page.
Or you could go more dynamic, list the banners Linkage ids in an
array and use attachMovie, or use the MovieClipLoader class and
load them as external swfs.
easiest? if your new to scripting and if you don't mind the
extra space in the file, go timeline.

How to best pass multiple flash vars in adobe-generated HTML?

I need to pass multiple flash vars into my swf -- I see multiple places in the adobe-generated HTML in which to put the flash vars. While I can do this successfuly for one flash var, I can't for more than one (I'm using something like this at the moment, which works, but cannot be extended URL=http://promotions-ea.yoyodyne.com/VideoFun.swf?XML_URL=http://promotions-ea.yoyodyne.com-h otspot/xml/whatever.xml)
Someone suggested
flashVars = {}
flashVars.XML_URL = "abc.xml";
flashVars.AB_CD = "whatever"
But I don't see how to put that into the adobe HTML.
Any help much appreciated.

Someone suggested using a JS array because that is how SWFObject would use it - and that's what you should use to embed your flash.Google SWFObject. Much better, much simpler.

Multiple HideShow Regions - Open/Close All

Using Oracle 10g, Apex 3.1.0
I have a page with multiple hideshow regions.
The customer would like to be able to open or close all of them with one or two ('OPEN ALL','CLOSE ALL') buttons but still have the standard open & close ability (one at a time).
Possible?
Bob

check this out
http://apex.oracle.com/pls/otn/f?p=35250:6:3551482161152928::NO
I hope it helps!
Sam
Please reward good answers by marking them correct or helpful!

How can I setup a mail-specific passcode/restriction on iPad used by multiple family members?

How can I setup a mail-specific passcode/restriction on iPad used by multiple family members?
Have an Exchange mail account setup and accessible in my mail on iPad... however my kids use it and i would like to restrict them from accessing this specific portion of the device. I tried viewing restriction options and do not see that i can apply a restriction specifically to Mail. Thanks for your help.

Not a feature of iOS. Check the AppStore to see if there are other
mail apps that allow passcode protection.
Or use Safari to log onto your email via a web-based interface and
enter your credentials each time. A bit slower, but the kids will
not know the details to login.

A lot of memory is used when multiple tabs are open

Is there anything that can be done about the insane memory usage in Firefox when multiple tabs are open? I often have 20+ tabs open and the amount of RAM that Firefox uses when I have it open with this many tabs is just ridiculous. As an example of this, I just restarted Firefox after checking the Windows Task Manager. The Task manager said that Firefox was using 1.2 GB of RAM. I did have 32 tabs open, but this seems excessive even for this many tabs. Some of the tabs were image heavy, but none of them had any video in them. I'd think 10 MB per tab of RAM would be plenty to cover these kinds of pages, maybe 20 MB at most. The upper end of that range would be 640 MB of RAM. Instead, it appears to be using an average of 40 MB of RAM per page when this many tabs are open.
Is there anything that can be done to reduce amount of memory being used when multiple tabs are open? It really shouldn't need this much RAM to serve this many pages.

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

How do you use the Multiple Item Information dialog box ???

How do you use the Multiple Item Information dialog box ???
Where are the instructions on how the information in the Multiple Item Information dialog box equates to ...
1. The way iTunes sorts tracks and albums
2. The reason to select a leading check box
3. Why there are Option selections (Yes /No) and leading check boxes.
4. Why some changes remain in the track info, but do not "take effect" in iTunes (Part of a compilation is an example)
Looked in Help, Support, went to the local Genius bar for an hour, even arrainged a call from apple support ...
Thanks

As Christopher says, it's a compilation. Different tracks are by different artists.
Setting the *Album Artist* field to *Various Artists* and setting *Part of a compilation* to Yes should be all that is required. Depending on your *Group compilations when browsing* setting ( I recommend On ) either should suffice but I suggest doing both.
Based on your commentary, I selected all the "O Brother" tracks, and checked the boxes for everything line that was blank in the Info and the Sort panes. Only exceptions were the album name and the disc number 1 of 1 and the artwork. I blanked and checked anything else.
That's not what I meant. When you select multiple tracks, only those values which +are already common+ to all tracks are displayed. Typically these will include Artist, though not with compilation albums, Album Artist, Album, No. of Tracks, Genre plus various sort fields. A blank value may indicate that different tracks have different values or it may be that the value is blank for all tracks. For the drop down values on the Options tab the value shown may not reflect the information in every tag. If values you expect to be common, such as Album Artist or the Album title are not displayed you can simply type these in and click OK. This will often be enough to group the album.
If you place a checkmark against the blank boxes and apply changes then you will clear those fields so you should only do this if that is the effect you want. Putting a checkmark next to an empty (representing different values) *Track No.* box, for example, will just clear the all the track numbers which is very rarely useful.
Adding then removing extra text is for a specific problem where despite all common values being identical across the tracks of the album iTunes seems to "remember" that it should see two albums. A typical example would be when an album originally listed as *Album CD1* & *Album CD2* is given disc numbers X of Y and then has the Album name changed to Album. I've seen iTunes merge all but one track into the new album, but insist on listing one remaining track separately, despite both albums having the same title. In this case I've found overtyping the album title again has no effect whereas changing it to AlbumX and then back to Album does what I was trying to achieve in the first place.
Don't forget that even properly organsied albums may still break up if you don't chose an album-friendly view. Sorting on the track name or track number columns can be useful in some circumstances but in general I revert to Album by Artist when browsing through my library.
tt2

Use of Multiple instances of the same browser...

Hi folks,
I have a question...
I have inherited a large APEX application, it uses Oracle SSO to log in.
We are migrating the application to a new set of servers and are running regression tests.
The testers are logging in using IE6 and opening multiple instances of the application at the same time on both the oldTest and newTest servers.
So at any one time, there can be:an application Admin user (username ADMINTEST123) logged into the application on oldTest
an application Admin user (username ADMINTEST123) logged into the application on newTest
an application standard user (username TEST123) logged into the application on oldTest
an application standard user (username TEST123) logged into the application on newTestIs this supported?
Could someone tell me or point me toward the documentation or thread that lists what is supported / unsupported for browser use with APEX and SSO?
Thanks in advance,
Gus..

Hi lev,
thanks but sorry, that doesn't really help me, I'm talking about users and their logins, not developers using different browsers while developing apex.
Also, our users are locked down to IE6 for the foreseeable future.
Hi Scott,
I found the following quote from this web site http://aranea.zuavra.net/index.php/80/ about Cookie separation in modern browsers
*4.3. Internet Explorer 6.0*
Finally, Explorer is the one that introduces an interesting quirk. It too has separate settings per machine users, although it cannot make use of multiple profiles for the same user.
The interesting thing is the way it handles session cookies. Normally, long term a.k.a. non-session cookies are stored on disk in the user preferences. However, Explorer has a setting called “browse in new process” which, if enabled, forces a new session with each new window. That’s right, this means that every time you open a new Explorer window it opens a separate process, even though the windows belong to the same user! And, in turn, these processes will NOT share their session cookies.
Note: By “new window” I mean windows started from shortcuts, from Start Menu entries or by calling iexplore.exe directly somehow (from a file manager, for example). Windows started via Control+N or File/New window run in the same process and share session cookies. Also, please note that it’s a lot more likely for users to click their taskbar shortcut when they need a new window than it is to use the File menu or the Control+N shortcut.+
Furthermore, ever since version 5.0 the setting cannot be changed manually, by the user. It is automatically determined by the browser based on how much RAM the machine has. Anything with at least 32 MB of RAM gets the “one window, one process” behaviour, which nowadays means almost all machines.
I have tested the *"new window"* opening methods and found that for IE6 there is NO NEW PROCESS started when the user opens a new window in the following 3 ways:
from an open window, File>New>Window
from an open window, CTRL+N
from an open window, right click>Open in New Window
So from this can I conclude that from what you say and the results above we may get issues if users login and then open new windows in those ways?
Thanks,
Gus..

Time Capsule only works for one device at a time, how to make it capable to be used for multiple devices at times

Time Capsule only works for one device at a time, how to make it capable to be used for multiple devices at times.
Please help to set it up, thanks in advance

You need to give more info..
Firstly only works for what.. networking.. backup.. wireless. You need more nouns.. more adjectives... describe what you want and what fails.. then we can figure out why.
Most likely you have bridged it when it should be in router mode..
Most likely you are using Lion or ML which has the airport utility bridge the TC by default.
Change it to working as a router. That might help.
If you press reset button it will default back to router btw.
If you are on Lion.. use a real utility. http://support.apple.com/kb/DL1547

How do I save and re-use a fillable form once I have created it? It is a form i will use for multiple medcial clients I see, then print out and put in paper chart, and then do it again for another patient. - I just got Acrobat XI

I've created a fillable form from a Word document, but how do I save and re-use a a fillable form once I have created it? It is a form I will use for multiple medical patients, printing out the filled in form to put in paper chart (no need to save filled out form), and then fill blank form again for another patient? - I just got acrobat X

Thanks!
That should also save the blank form for future re-use, right.?
Can I also file the blank form in the file system, and then retrieve it as a blank form when I have a next patient need for it?
Thanks
Michael

Use of Multiple partition in multiple flash regions

Similar Messages

Maybe you are looking for