Use of nofilter function

I have a basic vertical table with two columns - a date dimension and a measure. I have a drill filter on the date column. I want my vertical table to ignore the drill filter. I came across the nofilter function on the help topics but am not able to get it to work. I tried to apply the nofilter function "nofilter(DateDim) and nofilter(measure) " on both the dimension and measure(and combinations of) but couldn't get it to work. Can someone explain how to use the nofilter function? I am on XI 3.1.
Thanks,
Kelvin

Hi,
Let say you you want to find sum of Measure object ignoring the Filter then use the below fomula:
=Sum(nofilter(Measure))
Please let me know if this works for you.
Thanks,
Madhu.

Similar Messages

NoFIlter() function

Hello everyone,
Can we use Nofilter() function on dimensions instead of measures?
when i am trying to use this function on dimensions i am getting the below error:
"Unable to retieve the first page of the current report. Error WIJ 20003"

hi,
Yes. you can use NoFilter() on dimensions also.
For e.g. you can count the dimension 'Country' as below using NoFilter() function.
=NoFilter(Count([Country]);All)
NOTE:
1) NoFilter (expression;Drill) does not work in query drill mode because the drill filters are added to the query rather than applied to the report data.
2) If you end drill mode with drill filters applied, the drill filters become report filters and can change the value of any expressions to which NoFilter(expression;Drill) is applied.
Source: BO WEBI Help guide
Regards,
Vamsee
Edited by: vamsee m on Jun 1, 2011 2:48 PM

Using iPad mail program I have a draft of an email. I attempted to "cancel" and "delete draft" but it is still on my screen even after shutting down and restarting. How do I exit so that I can use other mail functions?

Using iPad mail program I have a draft of an email. I have attempted to "cancel" this and "delete draft" but the email stays on my screen. How can I exit this so that I can use other email functions?

Try closing the Mail app completely and see if it works properly when you re-open the app : from the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

How to use standard java functions in a XSLT mapping

Hi All,
I wish to use a standard java function in a XSLT mapping, The issue is either i am giving incorrect namespace which is used to invoke the function or the signature of the function call is incorrect, I have read all the links in http://help.sap.com, and i know one can enhance a XSLT mapping by writing one's own java code and thereby using java standard functions , but the requirement is such that i need to try and use java standard function in XSLT mapping itself.
Please refer to the sample code below:
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0"
 xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
 xmlns:javamap="java:java.lang.String">
<xsl:output method="text"/>
<xsl:template match="/">
<xsl:variable name="input" select="Title">
<xsl:if test="function-available('javamap:toUpperCase')">
<xsl:value-of select="javamap:toUpperCase($input)"/>
</xsl:if>
Author:<xsl:value-of select="Author"/>
</xsl:template>
</xsl:stylesheet>
error encountered is: Illegal number or type of arguments.
please reply if you have tried a similar scenario in SAP XI.
Thanks & Regards,
Varun

Hi Varun,
 First of all i want to tell you that as per the documentation you can only call the static function inside xslt mapping. Your toUpperCase method is a non static function.
What i am getting is that you have an element called Author and you want to convert its value into uppercase.
you can write your own user defined function which is static.
Signature of your java method :
public static string toUpperCase(String Author,Map inputparam)
try this xslt map.
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="2.0"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns:javamap="java:JavaProgram">
 <xsl:output method="xml" version="1.0" encoding="UTF-8" indent="yes"/>
 <xsl:param name="Author">
 <xsl:value-of select="//Author_name"/>
 </xsl:param>
 <xsl:param name="inputparam" />
 <xsl:template match="/">
 <Author>
 <xsl:if test="function-available('javamap:toUpperCase')">
 <xsl:value-of select="javamap:toUpperCase($Author,$inputparam)"/>
 </xsl:if>
 </Author>
 </xsl:template>
</xsl:stylesheet>
Hope this will work.
Thanks and Regards
Vishal Kumar

Derive found flag in SQL with where clause using TABLE(CAST function

Dear All,
Stored procedure listEmployees
==========================
CREATE OR REPLACE TYPE STRING_ARRAY AS VARRAY(8000) OF VARCHAR2(15);
empIdList STRING_ARRAY
countriesList STRING_ARRAY
SELECT EMP_ID, EMP_COUNTRY, EMP_NAME, FOUND_FLAG_
FROM EMPLOYEE WHERE
EMP_ID IN
(SELECT * FROM TABLE(CAST(empIdList AS STRING_ARRAY))
AND EMP_COUNTRY IN
(SELECT * FROM TABLE(CAST(countriesList AS STRING_ARRAY))
=================
I have a stored procedure which lists the employees using above simple query.
Here I am using table CAST function to find the list of employees in one go
instead of looping through each and every employee
Everything fine until requirements forced me to get the FOUND_FLAG as well.
Now I wanted derive the FOUND_FLAG by using rownum, rowid, decode functions
but I was not successful
Can you please suggest if there is any intelligent way to say weather the
row is found for given parameters in the where clause?
If not I may have to loop through each set of empIdList, countriesList
and find the values individually just to set a flag. In this approach I can’t use
the TABLE CAST function which is efficient I suppose.
Note that query STRING_ARRAY is an VARRAY. It is very big in size and this procedure
suppose to handle large sets of data.
Thanks In advance
Regards
Charan
Edited by: kmcharan on 03-Dec-2009 09:55
Edited by: kmcharan on 03-Dec-2009 09:55

If your query returns results, you have found them... so your "FOUND" flag might be a constant,...

How to use the Table Function defined in package in OWB?

Hi,
I defined a table function in a package. I am trying to use that in owb using Table function operator. But I came to know that, owb R1 supports only standalone table functions.
Is there any other way to use the table function defined in a package. As like we create synonyms for functions, is there any other way to do this.
I tryed to create synonyms, it is created. But it is showing compilation error. Finally I found that, we can't create synonyms for functions which are defined in packages.
Any one can explain it, how to resolve this problem.
Thank you,
Regards
Gowtham Sen.

Hi Marcos,
Thank you for reply.
OWB R1 supports stand alone table functions. Here what I mean is, the table fucntion which is not inculded in any package is a stand alone table function.
for example say sample_tbl_fn is a table function. It is defined as a function.It is a stand alone function. We call this fucntion as "samp_tbl_fn()";
For exampe say sample_pkg is a package. say a function is defined in a package.
then we call that function as sample_pkg.functionname(); This is not a stand alone function.
I hope you understand it.
owb supports stand alone functions.
Here I would like to know, is there any other way to use the functions which are defined in package. While I am trying to use those functions (which are defined in package -- giving the name as packagename.functionname) it is throwing an error "Invalid object name."
Here I would like know, is there any other way to use the table functions which are defined in a package.
Thank you,
Regards,
Gowtham Sen.

How do I use the print function to output a numeric variable with a fixed amount of leading zeroes

I need to create an output from a T-SQL query that picks a numeric variable and uses the print function to output with leading zeroes if it is less than three characters long when converted to string. For example if the variable is 12 the output should
be 012 and if the variable is 3 the output should be 003.
Presently the syntax I am using is PRINT STR(@CLUSTER,3) . But if @CLUSTER which is numeric is less than three characters I get spaces in front.
Please help!

>> I need to create an output from a T-SQL query .. <<
NO! NO! In RDBMS, we have a presentation layer that handles displays. We do not ever do it in the database. This is fundamental. But more than that, the purpose of PRINT is for debugging in T-SQL and never for output.
You are still writing 1960's COBOL or BASIC, but you want to to it in SQL. You probably picked the wrong data type (a numeric that should be a string) and are trying to repair your design error.
--CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
in Sets / Trees and Hierarchies in SQL

TS1398 I have an iPad mini, because of my work network firewalls I am not able to use the airprint function to print. I was told you can direct connect to a printer. I am not sure how as I have not seen any cables for a lightning connection to a printer c

I have an iPad mini, I am connected to my work wireless connection. My printer also is on the same wireless network, however I am not able to print to my airprint enabled printer through this wireless connection. Is there a way to direct connect to the printer via a cable ?
I am missing something here on the connection. I am thinking possibly a firewall here at work will not allow me to use the airprint function. Help ?

There is no support for wired printing.
It is probably a firewall issue, possibly where all inbound communications are blocked. Since you're at work, I'd call your work IT department and find out from them what you can/can't do.

Is there any way to use copy from function in cProject Project creation.

Hi,
Kinldy suggest if any one have idea to use copy from function in cProject while creating Project in cProject.
We have copy from function in our material creation and BOM, Is there any way to copy the old project and we can take the same for new project as a Paste entire structure.
Please share with me if you have any ideas for the same.
Thanls in advance for your help.
Thanks & Regards.
Raj

Hi,
please see
[http://help.sap.com/saphelp_ppm50/helpdata/en/4a/6431a343946ba2e10000000a421937/frameset.htm|http://help.sap.com/saphelp_ppm50/helpdata/en/4a/6431a343946ba2e10000000a421937/frameset.htm]
there the third case ("Based on an operational project ...")
Kind regards,
Florian

How can I use Seeburger java functions on SAP XI's user defined functions?

Hi All,
As my title implies; how can I use Seeburger java functions on SAP XI's user defined functions? I've tried searching over the net in tutorials regarding this topic but I failed to find one; can someone provide me information regarding my question? thanks very much.
best regards,
Mike

Hi Mike !
You should check your documentation about which java classes you need to reference in the "import" section of your UDF. And also deploy the java classes into the java stack or include them as a imported archive in integration repository...it should be stated in the seeburger documentation.
What kind of functions are you trying to use?
Regards,
Matias.

Does anyone know how to use the bcc functionality for apple mail while accessing it on the cloud from my PC?

I am currently away from my MAC and want to send an email through apple mail with the bcc functionality. I am using the cloud to get to my mail, however, I can't figure out how to use the BCC functionality, please help. Thanks!

Open your mail,
lower left corner click on settings,
go to composing and check BCC, save and your done

How to Use the language function for assignment and validation

Hi All,
If anyone can explain me in details with example ,how to use the language function for assignments and validations?
Thanks
Arnab

Hi Arnab,
The expression is checked only for the current MDM session.
If u login with the ABC language it will always show the ABC language no matter how many times u execute it.
Try connecting to the DM with the XYZ language.
It should go to the if part rather than else.
Hope it helps.
Thanks,
Minaz

How to use the CMS functionality in Sun Portal Server 7.2

Hi All,
How to use the CMS functionality using the ccd.war(Portlet) which is available in the library as i could add it to my channel but not able to show the functionality as it is showing the error msg "You are currently not logged in. Please login." should I create userid and there respective roles inorder to use the CMS functionality.
Has any one used this as I could this in glass fish server.
Any Input is appreciated.
Thanks & regards
Srikanth

Have a look at the "*Roles*" section of the portal server 7.2 content management system guide
http://docs.sun.com/source/820-4275/index.html . You can also look at [project mirage|https://mirage.dev.java.net] for some screencasts
Alternatively,
1. ccd.war has 3 portlets in it:
(a) custom content definition portlet
(b) custom content portlet
(c) workflow portlet
2. Inorder to work with these portlets, user needs to be in anyone of the below roles:
(a)Consumer (b) Editor (c) Approver (d) Administrator (e) Submitter (f) Contributor (g) Publisher
3. By default ccd.war gets deployed using a default roles file (/var/opt/SUNWportal/tmp/ccd.roles.properties)
Note: In windows, you may not find this file
4. Access the portlets as a user in any of the role mentioned in the ccd.roles.properties
(OR)
you can use a new roles file which has mapping to your custom roles. For this , undeploy existing ccd.war and deploy again with a new roles.properties file
Hope this helps!

How to use the divide() function in bpel

Hi All,
How to use the divide() function in bpel.
pls can u give the one sample example

2 div 4
Eg;
<assign name="Assign_1">
<copy>
<from expression="2 div 4"/>
<to variable="outputVariable" part="payload"
query="/client:testProcessResponse/client:result"/>
</copy>
</assign>
--Prasanna

How to use the pps function from JCOP?

Hi
I'm trying to use the pps function from JCTerminal (JCOP API: [url http://www.cs.ru.nl/~woj/jcopapi/com/ibm/jc/JCTerminal.html#pps(int, int)]pps function ) to connect my client to a virtual card with a specific protocol (T=0).
But I always got the error: "Protocol and parameter selection not supported by this terminal!"
I've tried to make an ATR that support both protocol : [url http://smartcard-atr.appspot.com/parse?ATR=3b909580811fc7dc]3B 90 95 80 81 1F C7 DC.
I really don't know what value to put in the second parameter (baud rate), I've tried with 150000, which is in the range of the ATR but I'm not sure this is correct. And I could't find any example of it.
I'm also not sure where to put the pps command, the specification say directly after a reset, so I tried this implementation:
System.out.print("Start");
 readers = TerminalFactory.getDefault().terminals().list(State.CARD_PRESENT);
 //If no readers has a card it ends the process
 if(readers.isEmpty()){
 System.out.println("\nNo card in the reader...");
 return;
 System.out.println("\nReader Type: "+readers.get(0).toString());
 term = (PCSCJCTerminal)JCTerminal.getInstance("PCSC", readers.get(0).toString().substring(15));
 term.open();
 System.out.println("\nTerminal opened");
 //Getting the ATR
 atr = new ATR(term.waitForCard(2000));
 try {
 term.pps(JCTerminal.PROTOCOL_T0, (int)150000);
 } catch (Exception e) {
 e.printStackTrace();
 System.out.println("ATR: "+toHex(atr.getBytes()));
 //sending a data 11223344
 System.out.println("\nsending data: 11223344");
 byte[] responsesend = term.send(0,cmdsend,0,cmdsend.length);
 System.out.println("Response data is:" + toHex(responsesend));
 //close terminal
 term.close();
 System.out.println("\nTerminal closed");I've got this output on the console:
StartReader Type: PC/SC terminal Virtual CAD Reader 0
Terminal opened
ATR: 3b 90 95 90 00 81 1f c7 cc
sending data: 11223344
Protocol and parameter selection not supported by this terminal!
 at com.ibm.jc.JCTerminal.pps(Unknown Source)
 at com.test.essai.main(essai.java:46)
>
And If I take a look at the data exchanged with the card:
Running in Virtual Card mode...
ATR: 3B909580811FC7DC
Waiting for event (power: off, protocol: unknown/undefined)...
Waiting for event (power: off, protocol: unknown/undefined)...
Raw event data: 01
Event: VCAD_EC_POWER_ON (0x01)
Reply: VCAD_SC_OK (0x00) (in reply to VCAD_EC_POWER_ON) ATR: 3b909580811fc7dc
Raw reply data: 003b909580811fc7dc
Sending reply...
Waiting for event (power: on, protocol: unknown/undefined)...
Waiting for event (power: on, protocol: unknown/undefined)...
Raw event data: 06ff11957b
Event: VCAD_EC_EXCHANGE_TPDU (0x06) C-TPDU: ff11957b
Accepting any PPS request parameters: Protocol: t=1; FI=9, DI=5
Reply: VCAD_SC_OK (0x00) (in reply to VCAD_EC_EXCHANGE_TPDU) R-TPDU: ff11957b
Raw reply data: 00ff11957b
Sending reply...
>
This (above) is the PPS command but not from the PPS function, it is always sent with protocol T=1
Waiting for event (power: on, protocol: t=1)...
Raw event data: 0501
Event: VCAD_EC_SET_PROTOCOL (0x05) Protocol: t=1
Reply: VCAD_SC_OK (0x00) (in reply to VCAD_EC_SET_PROTOCOL)
Raw reply data: 00
Sending reply...
Waiting for event (power: on, protocol: t=1)...
Raw event data: 0600c10120e0
Event: VCAD_EC_EXCHANGE_TPDU (0x06) C-TPDU: 00c10120e0
Handling protocol-specific command...
Protocol block:
NAD: 0x00
PCB: 0xc1 (T1_S_BLOCK); S-Block type: T1_SBT_IFS_REQ
LEN: 1
INF:
IFS: 20
EDC: 0xe0
Changing IFS(other) from 32 to 32
Reply: VCAD_SC_OK (0x00) (in reply to VCAD_EC_EXCHANGE_TPDU) R-TPDU: 00e10120c0
Raw reply data: 0000e10120c0
Sending reply...
Waiting for event (power: on, protocol: t=1)...
Raw event data: 0600001300a404000d54657374436c69656e7441707000f0
Event: VCAD_EC_EXCHANGE_TPDU (0x06) C-TPDU: 00001300a404000d54657374436c69656e74
41707000f0
Processing app. command...
App. block:
NAD: 0x00
PCB: 0x00 (T1_I_BLOCK); Seq. #: 0; More data: 0
LEN: 13
INF:
00a404000d54657374436c69656e7441707000
EDC: 0xf0
cmd name: N/A (class #4)
cmd: 00a40400 0d 54657374436c69656e74417070 70
Responding with the reversed command data, SW is hardcoded to 90<INS>
rsp: 707041746e65696c4374736554 90a4
Reply: VCAD_SC_OK (0x00) (in reply to VCAD_EC_EXCHANGE_TPDU) R-TPDU: 00000f70704
1746e65696c437473655490a475
Raw reply data: 0000000f707041746e65696c437473655490a475
Sending reply...
Waiting for event (power: on, protocol: t=1)...
Raw event data: 060040041122334400
Event: VCAD_EC_EXCHANGE_TPDU (0x06) C-TPDU: 0040041122334400
Processing app. command...
App. block:
NAD: 0x00
PCB: 0x40 (T1_I_BLOCK); Seq. #: 1; More data: 0
LEN: 4
INF:
11223344
EDC: 0x00
cmd name: N/A (class #1)
cmd: 11223344
Responding with the reversed command data, SW is hardcoded to 90<INS>
rsp: 9022
Reply: VCAD_SC_OK (0x00) (in reply to VCAD_EC_EXCHANGE_TPDU) R-TPDU: 0040029022f
0
Raw reply data: 000040029022f0
Sending reply...
Waiting for event (power: on, protocol: t=1)...
Raw event data: 03
Event: VCAD_EC_POWER_OFF (0x03)
Reply: VCAD_SC_OK (0x00) (in reply to VCAD_EC_POWER_OFF)
Raw reply data: 00
Sending reply...
Waiting for event (power: off, protocol: unknown/undefined)...
>
If someone know how to use this function or have any advice to help me to select a specific protocol with Jcop API, please let me know.
If you you need any more information don't hesitate to ask.
Best regards
Edited by: Cyril on Sep 22, 2011 9:54 AM

-1
I'm using a virtual terminal (windows driver), and I don't see how I could turn off the Auto-pps. I've also tried with a real reader and a card and I have the same error.
-2
I've tried value in the range of the atr (based on this analysis: [url http://smartcard-atr.appspot.com/parse?ATR=3b909580811fc7dc]http://smartcard-atr.appspot.com/parse?ATR=3b909580811fc7dc ). But I don't know if only I value of baud-rate is possible in the range. Anyway I just would like to change the protocol, not the baud-rate.
-3
I've already tried to call pps function before, after the first reset, or with another reset later and I always got the same thing.
 term = (PCSCJCTerminal)JCTerminal.getInstance("PCSC", readers.get(0).toString().substring(15));
 term.open();
 System.out.println("\nTerminal opened");
 //Getting the ATR
 atr = new ATR(term.waitForCard(2000));
 System.out.println("ATR: "+toHex(atr.getBytes()));
 jcard = new JCard(term,atr,0);
 jcard.reset();
 try {
 term.pps(JCTerminal.PROTOCOL_T0, (int)312500);
 } catch (Exception e) {
 e.printStackTrace();
 }The same pps is always send after each reset...

Use of nofilter function

Similar Messages

Maybe you are looking for