Use of Project Code
Hi to everyone,
Can we assign a Project Code as default for a user.
Thanks
Kentish
Hai Kentish Bhowaneedin
Please try this ,in payment , write as FMS query based on series for example
SELECT T0.[PrjName] from oprj T0 where T0.PrjCode = 'PR-HO-NW' and $[orct.series] = 431
this will help u when the user choose series project code will select automatically,but this is not a solution for your problem but you can try as work around
Similar Messages
-
How can i use the project code instead of project xml?
hello
i use the sessionbean+toplink structure,after i finish the o-r mapping by using the mapping work bench,i generate the project xml file,then in the "session.xml" file,i refer to the project xml,then i can use it from sessionbean.
i hear that if i use the project code instead of project xml file,it will be more performant,is that true?
otherwise,how can i use the project code instead of project xml file?i mean, in "session.xml", i can use the "<project-xml>" tag to refer to the project xml file,then in my session bean,i get the server session by read the "session.xml" file.but if i use the project code,how can i refer it from the "session.xml"?the examples that come with the toplink installation only tell me how can i use the project xml file within the session bean,it don't give me any clue about using the project code in the sesion bean,who can give me a step-by-step instruction and code snippet?
thank you very much?There is a slight performance gain during session load at startup but there is no difference at runtime. The choice of which to use is dependent upon you build process. Whether it is easier to submit a new version of the class into the comile build process vs an XML file. In most cases it is just a preference of the development team.
When you use the project-class you'll need to generate the source code and compile it into your system. Typically it is packaged with the persistent classes. You may need to configure your environment so that the class-loaders have access to these classes (same for the XML case).
When using the project-class you simply replace the project-xml entry like this:
<project-class>oracle.toplink.demos.employee.relational.EmployeeProject</project-class>
The DTD for the session.xml file is found at <TOPLINK_HOME>\core\sessions_4_5.dtd. It is also in the documentation at:
http://otn.oracle.com/docs/products/ias/doc_library/90200doc_otn/toplink.903/b10064/a-sessio.htm#634246
Doug Clarke
Product Manager
Oracle9iAS TopLink -
Hi,
Can I get Tax details using the project codes. I have entered project code in the row level of Invoices?To do so,
You have to define a new G/L (say for example 207003 for the tax and go to the chart of accounts and select the G/L and click account details
In the project dropdown select the project.
Now any posting to the G/L 207003 will have Project automatically filled in the Journal Entry.
Now click on 'Financials -> Financial Reports -> Accounting -> General Ledger Report.
Click the find button and select 207003
Select the Expanded button and from the window choose the project.
Now generate the report which is your Tax liability for the said project -
DRQ : add the "Project Code" column in the "Recurring Postings" function
Hello,
This is a DRQ about the Recurring Postings function.
It concerns the "Recurring Postings" functionality (Menu "Financials --> Recurring Postings").
Version : 2007A SP00 PL38
Description of requirements :
In the current version of SBO ( 2007A SP00 PL38 ) when we create some recurring postings, our customers need to specify the "project code" information for each line (in addition to the "Distribution Rules").
Business needs:
Some of our SAP B1 customers use the Project codes for "Cost Accounting" follow up. They need to specify the "Project Code" for each line in the Journal entries created in SBO. In the Recurring Postings, it is not possile to specify that kind of information in the current version of SBO!
Current Workaround:
As it is not possible to specify the "Project Code" for each line added in the Recurring Postings recorded as templates, our customers have to re-open each Journal entries created thanks to Recurring Postings execution and to manually add the "Project Code" for each line where it is missing.
Proposed solution:
The solution is simple : simply add the "Project Code" column in the Recurring Postings templates will allow the journal entries created to automatically get this information and will avoid the users to modify manually each journal entries generated with the "Recurring Postings" function.
Kind Regards.
GrégoryThe "project" field should also be available in the "Account Balance" grid. Every journal entry has a project code so it makes no sense that you can not view, filter, or sort by this field.
-
Aging report - detailed needs invoice project code
Dear All,
Would it be possible for us to have project code (on A/R invoice header) on Aging report - detailed print layout? I found all fields in Aging report - detailed PLD are sys var. Is there a way for us to figure out which sys var is for project code of the invoice? Thanks a lot.
Regards,
YukaUnfortunately you can't, you have to recreate it using crystal. In all SAP std reports you only able to show/print what it already shows.
-
Investment mgt:Error while distributing budgets using IM52 transaction code
I am getting an error message"Availability control can not be activated for hierarchial projects" when I distribute budgets using IM52 transaction code in Investment management.
Can you please tell me why and how to solve it?
Edited by: aravind reddy on Aug 19, 2008 4:34 PMI am getting an error message"Availability control can not be activated for hierarchial projects" when I distribute budgets using IM52 transaction code in Investment management.
Can you please tell me why and how to solve it?
Edited by: aravind reddy on Aug 19, 2008 4:34 PM -
Error while "Project Code Generation" in Entity service
Hi SDN's,
I have created an entity service which is the help documentaion of NWDS. After completion of all steps while generating project code i am getting an error called "AbstractStringBuffer not reachable"
Can any body help me in solving this issue.
Thanks in advanceHi Raju,
it seems like you have a version problem, try to use jdk 1.4 or higher and try.
Or go to
Prefrences --> Java --> Installed JRE's here change the Jdk to the latest,compatable version
Sometimes reinstallation also solves such problems.
Award pts if help full
Cheers
Souza -
Build error when using custom error codes
When I try to build my application using custom error codes I receive the following error:
Error 1 occurred at Copy in AB_Engine_Copy_Error_Files.vi->AB_Application.lvclass:Copy_Error_Files.vi->AB_Application.lvclass:Copy_Files.vi->AB_Build.lvclass:Build.vi->AB_EXE.lvclass:Build.vi->AB_Engine_Build.vi->AB_Build_Invoke.vi->AB_Build_Invoke.vi.ProxyCaller
Possible reason(s):
LabVIEW: An input parameter is invalid. For example if the input is a path, the path might contain a character not allowed by the OS such as ? or @.
=========================
NI-488: Command requires GPIB Controller to be Controller-In-Charge.
C:\Program Files\National Instruments\LabVIEW 8.5\user.lib\errors\BPMS-errors.txt
This only occurs the first time I attempt to build my application. If I build again immediately after receiving the error, everything works fine. My custom error codes were created using the provided editor, and I have included the file in my project. I have also checked the "Copy error codes" box in the advanced build specification settings.Hi Donovan,
The attached project is giving me the error previously discussed. Thanks for your help.
Attachments:
BuildError.zip 10 KB -
Using Eclipse project definitions to build the Flex SDK
It would be great if someone from Adobe could post on the recommended usage of the Eclipse project definitions in the development/eclipse/ subdirectory of the 3.0.x trunk distribution. I would like to debug some compiler modifications that I am working on.
I saw Peter Farland demo this setup at 360Flex, but was unable to capture all the details of the Eclipse configuration that he discussed in his talk.
thanks!If you go to the framework project’s properties, there is a section called Flex Library Compiler, you want to use a specific flex sdk (add a new sdk which points to the trunk, and use that) — you are probably building /against/ the wrong sdk, right code, wrong compiler.
- Jono
From: Ben Clinkinbeard <[email protected]>
Reply-To: <[email protected]>
Date: Thu, 3 Apr 2008 12:56:01 -0700
To: <[email protected]>
Subject: Re: Using Eclipse project definitions to build the Flex SDK
A new message was posted by Ben Clinkinbeard in
Developers --
Using Eclipse project definitions to build the Flex SDK
Sorry, I'm not following. My SDK project is from the trunk.
Thanks,
Ben
On Thu, Apr 3, 2008 at 3:32 PM, Jono Spiro <[email protected]> wrote:
A new message was posted by Jono Spiro in
Developers --
Using Eclipse project definitions to build the Flex SDK
Try changing the sdk for the framework lib project to trunk (you'll need to add a new flex sdk, name it whatever you want) -- it's in the project properties. It's using the wrong compiler.
- Jono
From: Ben Clinkinbeard <[email protected]>
Reply-To: <[email protected]>
Date: Thu, 3 Apr 2008 05:13:43 -0700
To: <[email protected]>
Subject: Re: Using Eclipse project definitions to build the Flex SDK
A new message was posted by Ben Clinkinbeard in
Developers --
Using Eclipse project definitions to build the Flex SDK
I am running FB on top of Eclipse 3.3.2.
<http://3.3.2.> <
<http://3.3.2.>
http://3.3.2.> I checked out the whole SDK trunk and can build the main ant task with no errors. I used the instructions mentioned above to create a Flex framework library project and thats where the error comes in. (I had tried to manually build a framework project a few times and it was a nightmare.) I would probably prefer to work on the 3.0.x branch/tag as I hope to submit a patch or two but saw Joe mention that the project defs only existed in the trunk.
Searching Google for the oem error turns up lots of links about projects that had assets deleted and the build got confused but following the instructions on how to fix proved unsuccessful.
Thanks,
Ben
On Thu, Apr 3, 2008 at 1:45 AM, Jono Spiro <[email protected]> wrote:
A new message was posted by Jono Spiro in
Developers --
Using Eclipse project definitions to build the Flex SDK
I always forget what that error means when it comes up -- though it's been ages since I've seen it last, literally.
Joe: Since you mention Java 1.5, I'm guessing the errors are in the asdoc package? Those should be turned off (read: turned into a warning) -- Eclipse is a little too persnickety about that particular error. There's a preference for this in the Java section under warnings and errors. It's turned off in the trunk dev projects. Otherwise, you should be able to run the compiler directly with no problems (okay, one more caveat: there's a class loader issue with the OEM, fixed in trunk if you look for my Java 1.5 checkin).
Ben: What is your setup? What are you building (Ryan mentions trunk, Joe mentions 30x), which Eclipse, which dev projects, did you build the sdk from the commandline first, etc.?
Cheers,
Jono
View/reply at Using Eclipse project definitions to build the Flex SDK <
<http://www.adobeforums.com/webx?13@@.59b4a9d4/3>
http://www.adobeforums.com/webx?13@@.59b4a9d4/3>
Replies by email are OK.
Use the unsubscribe <
<http://www.adobeforums.com/webx?280@@.59b4a9d4%21folder=.3c060fa3>
http://www.adobeforums.com/webx?280@@.59b4a9d4%21folder=.3c060fa3> form to cancel your email subscription.
View/reply at Using Eclipse project definitions to build the Flex SDK <
<http://www.adobeforums.com/webx?13@@.59b4a9d4/5>
http://www.adobeforums.com/webx?13@@.59b4a9d4/5>
Replies by email are OK.
Use the unsubscribe <
<http://www.adobeforums.com/webx?280@@.59b4a9d4%21folder=.3c060fa3>
http://www.adobeforums.com/webx?280@@.59b4a9d4!folder=.3c060fa3
<http://www.adobeforums.com/webx?280@@.59b4a9d4%21folder=.3c060fa3> > form to cancel your email subscription.
View/reply at Using Eclipse project definitions to build the Flex SDK
<http://www.adobeforums.com/webx?13@@.59b4a9d4/6>
Replies by email are OK.
Use the unsubscribe
<http://www.adobeforums.com/webx?280@@.59b4a9d4%21folder=.3c060fa3> form to cancel your email subscription.
View/reply at Using Eclipse project definitions to build the Flex SDK
<http://www.adobeforums.com/webx?13@@.59b4a9d4/7>
Replies by email are OK.
Use the unsubscribe
<http://www.adobeforums.com/webx?280@@.59b4a9d4!folder=.3c060fa3> form to cancel your email subscription. -
Dear All,
Presently we use project codes as " H.00.HXX.000.00.00.00.00 "
Now we have created project upto series H.08.HXX.999.
We are unable to create H.08.CXX.1000 or further.
Now I tried to change the coding mask in the config by changing H.08.HXX.000 to H.08.HXX.0000 , but the system is not allowing the same.
Please suggest me on this matter.
Regards,
VishalHi,
Thanks for the reply.
I think what u have suggested is right.
But still I am looking for possibility of the same.
May be OSS note could of some help.
Thanks again.
Regards,
Vishal -
When to use what project type?
Hi,
I am kind of baffled by the use of Flash Project in Flash Builder 4.
Flex Project is for build RIA\Flex applications with a design view available for creating the GUI.
ActionScript projects allow you to program\debug AS3 code and only when you run the application you get a visual feedback.
1) But when will I want to use Flash Projects?
The reason I am asking is that I have a project that currently works by running a main swf file that in turn loads additional swf files (Sorry I can't show you a demo), switching the loaded swf every 30 seconds.
I am leaning to use a Flash Project to manage my project. On the other hand, I could move the entire project to Flex and implement the different swfs as different states of the GUI.
2) What do you think?
Thanks for your help and feedbacks.You can start reviewing this topic from here
http://help.adobe.com/en_US/flashbuilder/using/WS6f97d7caa66ef6eb1e63e3d11b6c4d0d21-7ffb.h tml#WSbde04e3d3e6474c4-63107a8b12642da83ed-8000
I would also want to add some details about my project that cause me to ponder on what project type to use.
1) My project involves multiple flash\swf files that are loaded during work. I need to manage their creation.
2) All my swfs are loaded as part of a single application that runs in the backgrounds and loads each swf to display different information.
3)I have many as3 files that I use and would also like to manage them properly.
4) I would have liked to manage the project under a cvs project, like you can do with Java, so I don't have to do manual backups.
Any ideas? -
What is the use of T. code cj8g
Hi All,
Can anybody explain me what is the use of T.code CJ8G.If we execute this transaction. what is the effect on cost center and wbs element.before executing this Actual settlement. what configuration is to be done pior.
Thanks in Advance.
ChanduCJ8G is a T Code which processes the settlement collectively. You create a varaint (group of projects) and the execute the settlement, which then moves the cost out of the WBS elements to any receiver such as cost centres etc.,
CJ88 processes the settlement individually.
For settlement to run, you need to do certain configuration and maintain the master data;
Configuration:
Allocation Structure (Source Cost Elements, Settlement cost element/By Cost Element)
Settlement Profile
Master data:
Maintain the settlement rules (receiver i.e, CTR-Cost Centre etc) on the WBS.
Regards
Sreenivas -
How to use this example code in Flash AS3?
Hi,
How can I use this AS3 code in my Flash CS4 document? The following code is in the below link:
http://pv3d.org/2009/12/18/tweenmax-tweening-a-timeline-advanced-tweening/#
Please help.
Thanks.Hi,
It is working quite nice. I want to use the same code but instead of as "Document Class" I want to put that code in a first key frame of my project. I tried the following but gets an error:
The error is : 1131: Classes must not be nested.
And the following code I tried is:
import com.greensock.TimelineMax;
import com.greensock.TweenMax;
import com.greensock.easing.Linear;
import com.greensock.easing.Quart;
import flash.display.Sprite;
* @author John Lindquist
[SWF(width="900", height="480", frameRate="31")]
class EasingATimeline extends Sprite
private var square:Sprite;
private static const STEP_DURATION:Number = 1;
public function EasingATimeline()
square = new Sprite();
square.graphics.beginFill(0xcc0000);
square.graphics.drawRect(0, 0, 50, 50);
square.graphics.endFill();
square.x = 100;
square.y = 50;
addChild(square);
//set all the eases of your steps to Linear.easeNone
var step1:TweenMax = TweenMax.to(square, STEP_DURATION, {x: 700, y: 50, ease: Linear.easeNone});
var step2:TweenMax = TweenMax.to(square, STEP_DURATION, {x: 700, y: 350, ease: Linear.easeNone});
var step3:TweenMax = TweenMax.to(square, STEP_DURATION, {x: 100, y: 350, ease: Linear.easeNone});
var step4:TweenMax = TweenMax.to(square, STEP_DURATION, {x: 100, y: 50, ease: Linear.easeNone});
var timeline:TimelineMax = new TimelineMax();
timeline.append(step1);
timeline.append(step2);
timeline.append(step3);
timeline.append(step4);
//pause your timeline
timeline.pause();
//tween your timeline with whatever ease you want
TweenMax.to(timeline, timeline.totalDuration, {currentTime: timeline.totalDuration, ease: Quart.easeInOut, repeat: -1});
Please help me to solve this problem.
Thanks. -
Freight - Marketing Documents Assign a Project Code
Hi All,
I have a customer that uses project codes and profit center functionality in SAP Business One. They flag transactions to record the relevant project codes and profit centers for extended reporting requirements. So far we have had no issues but we have encountered one lack in functionality which I can't seem to configure in SAP Business One. The issue is that we cannot assign a project code when recording additional charges / freight during a marekting document in SAP Business One. However you are able to assign a profit center? Is this a limitation of the product and if so will this be addressed in future versions? Does anybody know?
Any feedback / ideas will be greatly appreciated!
Thanks
Andre PienaarHi
Whole Marketing Document can be assigned to project, even freight is having separate profit center.
If u want to include more features in B1 pls post ur queries here:
Forum: SAP Business One Product Development Collaboration:/community [original link is broken]
Giri -
Project Code range on Profit & Loss Report
Forum,
Is there a system variable which can be added to the Profit & Loss Statement which will show selected project codes on the PLD.
Regards,
JuanHi Juan,
Simply click on Expanded Selection criteria and you will see the fields you want. Use them in your PLD.
OFLT WhsFrom1
OFLT WhsTo1
OFLT WhsFrom2
OFLT WhsTo2
Maybe you are looking for
-
hello, i just downloaded itunes on my acer laptop and its been giving me problems everytime i try to get on to the itunes store.. it gives me a message saying "itunes could not connect to the itunes store. an unknown error occurred. (310).plz help me
-
Hi, Can we use the standard text in S010 for storing only text or we can values or variables also.I want to use standard text in smartform. Rgds
-
Can I playback in both channels with my audio interface?
From what I've found so far I'm afraid the answer is already "no" but I have to ask for myself. When I record into QuickTime movie (not Pro) using my Alesis IO|14 Firewire interface, it only plays back on the left channel. Is there ANY way to get it
-
Suddenly unable to copy & paste in Indesign CS5
I was working in a document, and I'm now unable to use copy & paste. Keyboard shortcuts do not work and items are inactive in the top menu. Any idea what's wrong ?
-
I need help with filtering webapps
Hi Guys This client has products that we built in webapps. Now he wants to be able to display certain products, based on input from the user. Example: User enters page that prompts: Please select an industry for your laser measurements: - Select item