When to use what project type?

Hi,
I am kind of baffled by the use of Flash Project in Flash Builder 4.
Flex Project is for build RIA\Flex applications with a design view available for creating the GUI.
ActionScript projects allow you to program\debug AS3 code and only when you run the application you get a visual feedback.
1) But when will I want to use Flash Projects?
The reason I am asking is that I have a project that currently works by running a main swf file that in turn loads additional swf files (Sorry I can't show you a demo), switching the loaded swf every 30 seconds.
I am leaning to use a Flash Project to manage my project. On the other hand, I could move the entire project to Flex and implement the different swfs as different states of the GUI.
2) What do you think?
Thanks for your help and feedbacks.

You can start reviewing this topic from here
http://help.adobe.com/en_US/flashbuilder/using/WS6f97d7caa66ef6eb1e63e3d11b6c4d0d21-7ffb.h tml#WSbde04e3d3e6474c4-63107a8b12642da83ed-8000
I would also want to add some details about my project that cause me to ponder on what project type to use.
1) My project involves multiple flash\swf files that are loaded during work. I need to manage their creation.
2) All my swfs are loaded as part of a single application that runs in the backgrounds and loads each swf to display different information.
3)I have many as3 files that I use and would also like to manage them properly.
4) I would have liked to manage the project under a cvs project, like you can do with Java, so I don't have to do manual backups.
Any ideas?

Similar Messages

When to use what???

What is the difference between Abstract class and an interface?
When to use what?
Why is it that abstract classes have constructors but not interfaces?
Thanks in advance...

sorry...yawmark..No prob - I was probably a little harsh, but laziness is rampant here. I've summarized some useful links below:
Java Glossary : interface vs abstract class
Abstract classes vs. interfaces: When does it make sense to choose an abstract class over an interface?
Abstract classes and interfaces practicum: Move from theory to practice on when to employ abstract classes vs. interfaces
Tech Tips: ABSTRACT CLASSES VS. INTERFACES

Select-options and Parameters, when to use what?

Hi gurus,
I have been using Parameters for long. Now I want to choose a range of values, which I need to retrieve from database.
I tried using select-options. Can't I use 2 parameters that is parameter1 and parameter2 and mention query BETWEEN para1 AND
para2, and when I use NO INTERVALS and NO EXTENSION together, it behaves same like parameter, then why did SAP gave these
extensions.

Hi friend,
Simple differences between Select-options and parameters.
Select-Options Uses keyword 'for'
Parameters Uses keywords 'like', 'type'
Select-Options Uses operator 'in'
Parameters Uses operator '='
Select-Options Provides ranges for selection
Parameters No ranges only single value
Select-Options Creates selection table
Parameters No selection table
Select-Options When i/p blank all records selected
Parameters   When i/p blank none is selected
Note:
Select options can act as parameters by using 'no-extension' 'no intervals', but all records will be selected when i/p is blank unlike parameters.
Might be helpful..
Thanks...
Edited by: Guest77 on Feb 10, 2009 5:44 AM

Can any body tell me when to use what Bean?

Hi ,
I am naive to EJB . I want to know when to use which bean . Pls quote with an example.
Thanks in advance .
Mahesh L.

I would highly recommend picking up a book on EJBs
Professional EJB - Wrox
Enterprise JavaBeans - O'Reilly
Mastering Enterprise JavaBeans - Sams
These are all excellents books and will explain in great detail with sample code how to program EJBs

When to use what facelet file

hello sir
1. I have developed one project , where different types of facelet pages are created. but i m confused, what is the rule to use these facelet file , different options displays are as :
new Facelet Composition Page
new Facelet Footer
new Facelet Header
new Facelet Template
2. new facelet composition page was created in Web Content folder , while new facelet footer , new facelet header, new facelet template pages were created in WEB-INF folder
what is the concept, tell me sir
Regards
Inam

sorry...yawmark..No prob - I was probably a little harsh, but laziness is rampant here. I've summarized some useful links below:
Java Glossary : interface vs abstract class
Abstract classes vs. interfaces: When does it make sense to choose an abstract class over an interface?
Abstract classes and interfaces practicum: Move from theory to practice on when to employ abstract classes vs. interfaces
Tech Tips: ABSTRACT CLASSES VS. INTERFACES

When I use Export Project to New Library in Aperture does it create a copy of the images in the new Library?

I am going through my only library now and trying to better organize everything. I am grouping my images into projects by year then cleaning up each year. As I finish a year I use the Export to New Library option to create a library for each year. My question is when I do this and I tell it to Consolidate Masters into exported library does it create copies of the images in the new library as well as leaving a copy in the original library? My goal once I get this completed is to delete the original library but I certainly don't want to lose any of my images. Just looking at file sizes for the libraries I can see that the main library never gets smaller and the new libraries don't really seem large enough to contain everything.
Thanks.

To be honest a 6 year old machine with 4gb of memory and 300gb of disk running Lion and Aperture is not going to give you the greatest performance no matter how you split the library.
You're going to need more disk, What's your backup procedure now? The best performance will be had by getting an external disk putting the masters on it as referenced and having the library on the internal drive.
More memory would be nice but a 6 year old iMac, I think, is maxed out at 4. You'll need to keep other programs running to a minimum when you're working with Aperture.
How much free space is on the internal drive? That will be an issue also. If even with the masters relocated to an external drive cause the internal drive to fill up you'll need to move the library off the internal. If you do that you'll want to go with a FW drive. As long as only the masters are on the external you can get by with a USB but once the library goes out there you're really want to look at FW.
Hope this helps, post back if you have more questions
regards

Error when using RTF as type of web report

When I use RTF as type of web report ,the program will exceptionly terminate with exceptoin.When I use html,Pdf format,it work well.Who can help,Thanks in advance.

It seems your browser is not properly configured to handle RTF content. You can try to load a local RTF directly into your browser and see if that works.

Please materials about what condition we use what type of IDOC types and me

Hi all:
are there any materials about what conditions we use what IDOC types and what messsage types?
would you please give a me a hint ?
Thank you very much!!!

Hi
Check below thread for IDOC
http://****************/Tutorials/ALE/ALEMainPage.htm
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b828943d711d1893e0000e8323c4f/frameset.htm
Regards,
Syf
Edited by: syfulla shaik on Aug 18, 2008 1:09 PM

How can i use the project code instead of project xml?

hello
i use the sessionbean+toplink structure,after i finish the o-r mapping by using the mapping work bench,i generate the project xml file,then in the "session.xml" file,i refer to the project xml,then i can use it from sessionbean.
i hear that if i use the project code instead of project xml file,it will be more performant,is that true?
otherwise,how can i use the project code instead of project xml file?i mean, in "session.xml", i can use the "<project-xml>" tag to refer to the project xml file,then in my session bean,i get the server session by read the "session.xml" file.but if i use the project code,how can i refer it from the "session.xml"?the examples that come with the toplink installation only tell me how can i use the project xml file within the session bean,it don't give me any clue about using the project code in the sesion bean,who can give me a step-by-step instruction and code snippet?
thank you very much?

There is a slight performance gain during session load at startup but there is no difference at runtime. The choice of which to use is dependent upon you build process. Whether it is easier to submit a new version of the class into the comile build process vs an XML file. In most cases it is just a preference of the development team.
When you use the project-class you'll need to generate the source code and compile it into your system. Typically it is packaged with the persistent classes. You may need to configure your environment so that the class-loaders have access to these classes (same for the XML case).
When using the project-class you simply replace the project-xml entry like this:
<project-class>oracle.toplink.demos.employee.relational.EmployeeProject</project-class>
The DTD for the session.xml file is found at <TOPLINK_HOME>\core\sessions_4_5.dtd. It is also in the documentation at:
http://otn.oracle.com/docs/products/ias/doc_library/90200doc_otn/toplink.903/b10064/a-sessio.htm#634246
Doug Clarke
Product Manager
Oracle9iAS TopLink

Inventory load using 561 movt type and auto confirm TO in MB1C using 561 movt type

Hello All,
I am doing the inventory load using 561 movt type in MB1C. Then the material is in 998 storage type and bin "AUFNAHME". my requirement is that i want to confirm the TO, when i do the MB1C itself for the 561 movt type. Is there a way in the SAP, where i can trigger the TO confirmation in the background automatically, when i use 561 movt type in MB1C.
Right now my thought processing is that as below,
i create the inventory load using 561 movt type in MB1C and use the LT10 and move the stock to a different bin and confirm the TO.
In the above step, i am using LT10 as a extra step for confirming the TO, which i am trying to decreasing my configuring in such as way for the movt type 561, so that it will automatically confirm the TO in the background, while doing the MB1C.
My 2nd question is, when i have 5000 different materials, which are inventory loaded using 561 movt type and MB1C. I am trying to auto confirm the TO in the background, when doing the MB1C for 561 movt type itself.Secondly, if it doesn't work, then i can goto LL01 and pick the unconfirmed TOs and mass confirm the TO's.
On the whole, my questions are is there any std config in SAP to auto confirm the TO for movt type 561 in MB1C. If it is not possible, then i need the best way to mass confirm the TO's in SAP.
Thnks,
Kapil

Hello Kapil,
Let me explain the process step by step
Assumption/mandatory criteria- The process is applicable only in case you do not have storage unit management active This process is warehouse transfer w/o WM transaction. This method is based on principle of MB1A- 711/712 movement type.
(1) Use OMJJ and create new movement type by coping 561 for ex- "Z61". In field selection (flield selection from 201) double click on WM and make the entry "WM storage bin and storage type as required entry from suppress.
(2) Now use MB1C with above customised movement type. At the end of this transaction,system will take you to the screen to make an entry in storage type and storage bin. Post the entry.
That's it. Your stock would be in warehouse as well as IM stock would be in sync. There is no TR/TO. You can create LSMW to upload the data by this method. If you have SUT defined then you can follow the same process as above. But after that do not forget to update LQUA-LETYP field with respective SUT. However, you can not use this method in case you have SU management active.
My view with this upload process- Please use other data uploading method which are not at all time consuming. In more than 90% of most of the business scenarios, storage unit type is used. Hence you will have to perform additional activity of updating LQUA-LETYP-storage unit type field. If this is the case, then why cant you use other uploading method?.
Thanks,
Milind

Sorting of bins by using WM movement types

Hello,
I want to have my sorting of bins in descending order when am using the movement type 999. For example, i have bins which name are 11, 12 and 13. When i used the WM movement Type 999, i want my TO created will trigger the bins in order of starting to 13, 12 and 11. where could exactly i need to define that given that the movement type 999 settings is blank data for source and destination source bin is blank.
thanks in advance!!
trek

Hello John,
The print code is the same for the movement types that i have used, it is 21.For the sort profile TO processing configurations, we have a standard data that we have followed for all the warehouses.Are there any ways where i could set the sorting of bins in decreasing or ascending depending on the movement types that i will used?
Thanks in advance!

CProjects - Assign Project Types to Ogr. unit

Hi,
We are on cProjects 4.0.
We require a Project Type to be valid only for an org. unit such that users of other org. unit cannot acccess this project type. Can we achieve this?
Please suggest...

Hi Bittu,
The best way might be to hide some project types, which must not be used. But unfortuenately there is no such feature.
As work around, you can implement the Badi method ATTRIBUTES_VERIFY of Badi DPR_ATTRIBUTES. It will be called, after you input the project type & click of the 'create' button. Within this method, you can decide if the user can use the project type or not.
Kind regards,
Zhenbo

I want to buy a hard case for my macbook pro, but I don't know what year it is. When I use the serial number to try and find out, all it says is, "~VIN,MacBook Pro (15-inch Glossy)". When I type that into amazon for a case it gives me nothing!

I want to buy a hard case for my macbook pro, but I don't know what year it is. When I use the serial number to try and find out, all it says is, "~VIN,MacBook Pro (15-inch Glossy)". When I type that into amazon for a case it gives me nothing!

Hi T,
Either of these will give you the info you seek:
http://www.appleserialnumberinfo.com/Desktop/index.php
http://www.chipmunk.nl/klantenservice/applemodel.html

My garageband can't be used because when I open a project (new or old) the program extends beyond the bottom of the display screen and I can't access what is below the bottom of the screen (like the record button). I know there's a simple fix, but what?

My garageband can't be used because when I open a project (new or old) the program extends beyond the bottom of the display screen and I can't access what is below the bottom of the screen (like the record button). I know there's a simple fix, but what?

two things to try: either click the green "zoom" bottom at the topLeft of the window in the title bar, or go to your System Prefs and then Displays, and increase the resolution that is used

What is TYPE GROUP /TYPE-POOL? When to use that ?

hello friends
Can any one tell me
What is TYPE GROUP /TYPE-POOL? When to use that ?
Thanks & Best Regards
Nilesh

Type group
If you want to define global constants, you have to use a type group. The name of
the type group can only contain a maximum of five characters. In the type group,
you can define constants using the CONSTANTS statement. As types, you are
provided with the integrated ABAP types or the global types of the Dictionary.
In order to be able to use the types of a type group in a program, make the type
group known using the TYPE POOL statement. From these lines on, you can use
all constants of the type group.
The definition of a type group is a piece of ABAP code that is either maintained
via the Dictionary (SE11) or via the ABAP Editor (SE38).
Realization:
The first statement for the type group zmytp is always:
TYPE-POOL zmytp.This is followed by the definition of data types with the statement TYPES, as
described under local program data types. Furthermore, cross-program constants
can be declared using the CONSTANTS statement. All names of this data type
and constants must begin with the name of the type group and an underline:
zmytp_
In an ABAP program, type groups must be made known with the following
statements before they are used:
TYPE-POOLS zmytp.
When using this statement, all data types ansd constants, which are defined in the
zmytp type group can be used in the program. Several type groups can be used
in a program.

When to use what project type?

Similar Messages

Maybe you are looking for