Use of r3trans -d command in UNIX related to Database...?

Hi gurus,
What is the use of r3trans -d command in UNIX related to ORACLE Database...?
thanks in advance.
Regards,
BBR.

Hi ,
R3trans-d is used to check the whether DB is active or not .Along with R3trans-d to check db active or not , I give you some more command to check.
Following methods used to check whether DB is active or not :
1. ps -ef |grep ora
2. ps -ef |grep ora_
3. ps -ef |grep pmon
4. R3trans -d ; give RC - 0000 means active other than 0000
is error
5. in Brtools 1.Instance Management, 6 - Show instance
status, 3-Database instance, give the instance name i mean
Database Name and press continue....give the status
6. we can also check for SQL
SQL> select status from v$instance;
STATUS
OPEN
Hope this will help u out.
Thanks and Regards,
Arun Rathour

Similar Messages

Using the MAIL command of UNIX through JAVA

Can any one give me a lead or example on how to call the MAIL command of UNIX to send mails using JAVA.

Use java.lang.Process for it. See the code below, it will
help you understand how it would be possible.
Process p = Runtime.getRuntime().exec("mail username");
in = p.getInputStream();
out = p.getOutputStream();
Now stdout will be available on 'in' for reading e.g.
you can expect Subject: and Cc: lines on linux box.
and write data/message to 'out'. It will be the message
which you will wrile in normal use of mail on stdin.
Good Luck
Mumtaz Siddiqui

[Forum FAQ]How to use Azure Cross-Platform Command-Line interface in Mac OS

1. Download the installer on Microsoft Azure website.
Figure 1.
2. Open the DMG file and install the following package.
Figure 2.
3. Open Terminal (Mac OS build-in), type “azure login” and enter your azure account to login.
(Note: you can login only via a Microsoft organizational account or service principal.) We used a Microsoft account to connect. (Figure 3)
Figure 3.
After that, we can use the commands to manager Azure instances and services. You can type “azure help” to list all the available commands.
Figure 4.
If you want to view the detailed information for a specific command, you can type “azure help xxx”. For example, we can run “azure
help vm” to list all the commands for managing Azure Virtual Machines.
Figure 5.
In the figure below, we used the “vm create” command to create a new virtual Machine (testmachine002) in a new cloud service (testmachine003)
and virtual network (vnet1).
Figure 6.
To obtain the image name, you can type “azure vm image list”:
Figure 7.
After the “vm create” command executed, we can find that the Virtual Machine(testmachine002) is created in Azure management portal.
Figure 8.
More information:
http://azure.microsoft.com/en-us/documentation/articles/xplat-cli/
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Here on Apple Discussions, you will find many command line enthusiasts hanging out in the UNIX forum. Good luck.

Can i use java mail APIs to read Unix mail

hi
can i use java mail APIs to read Unix mail?
Unix has "mail" command which can be used to access mails on the Unix system.
is it possible to execute mail & access unix mails remotely using POP/IMAP
thanks in advance

There are JavaMail providers that allow you to access the Unix mail spool files directly. Alternatively the standard JavaMail API can access a POP or IMAP server, if one is installed.

Run Unix command / Run Unix shell script from Forms9i

Hi,
I have a requirement to run Unix command and Unix shell scripts from Forms9i.
I know HOST command cannot be used directly. I also know we can create some JAVA stored procedure to perform the task, but I don't want to create any JAVA stored procedure as there are some security concerns.
Please point me towards any other way to achieve the same.
I would really appreciate your help.
Thanks,
Kumar

There is no reason why HOST can't be used. This is what it is for. As for using Java, it is not a stored procedure that you would be using, it would be imported Java (imported into the form).
The best way to use the HOST command is to call a script (.sh) rather than calling a Unix command directly. This is because HOST will not pick up environment variables set at the system level. So the script would first need to set the necessary environment variables then call the desired commands.

Using the Oracle Repository Command Line Tool under Linux

I have to use the command lines of Linux for SCM commands(like repcmd,
set workarea, checkin etc...)
should I have to install something?
I have documentation for using the oracle repository command line Toll
for Windows and Unix, but I didn't found anything about using the oracle
repository command line Tool for Linux.

JDeveloper runs excellent on Linux and is supposed to be able to use the repository, but that's a GUI...

Trying to Download a Software Image to Cisco 2800 series router through TFTP Using the tftpdnld ROMmon Command

Trying to Download a Software Image to Cisco 2800 series router through TFTP Using the tftpdnld ROMmon Command
and I am getting an Error , I cant figure out what I am doing wrong. I have also pasted my display down here can someone help me out, thanks in advance, I am still new to this utility.
My questions are How do you direct this utility to point to the desktop or the TFTP folder
does FE_PORT: Fast Ethernet 0 imply or point to Fa0/0 on my router
My router is suppose to have 10.0.0.3 255.0.0.0
Gateway of 10.0.0.1 255.0.0.0
My TFTP Server 10.0.0.2 255.0.0.0
How do I get the MAC address of the Router or the TFTP Server and which one is required?
my Ethernet port is 100Mb/Sec I cant tell whether it is full duplex or not so How do i set this FE_SPEED_MODE: Auto???
=====================================================================================
rommon 10 >
rommon 10 > set
PS1=rommon ! >
FE_PORT=0
WARM_REBOOT=
RET_2_RTS=20:35:55 UTC Thu Sep 25 2014
BSI=0
RET_2_RCALTS=
RANDOM_NUM=1600357627
?=0
IP_ADDRESS=10.0.0.3
IP_SUBNET_MASK=255.0.0.0
DEFAULT_GATEWAY=10.0.0.1
TFTP_SERVER=10.0.0.2
TFTP_FILE=
rommon 11 > TFTP_FILE=c2800nm-adventerprisek9-mz.124-24.T4
rommon 12 > TFTP_CHECKSUM=0
rommon 13 > SET
monitor: command "SET" not found
rommon 14 > set
PS1=rommon ! >
FE_PORT=0
WARM_REBOOT=
RET_2_RTS=20:35:55 UTC Thu Sep 25 2014
BSI=0
RET_2_RCALTS=
RANDOM_NUM=1600357627
IP_ADDRESS=10.0.0.3
IP_SUBNET_MASK=255.0.0.0
DEFAULT_GATEWAY=10.0.0.1
TFTP_SERVER=10.0.0.2
?=0
TFTP_FILE=c2800nm-adventerprisek9-mz.124-24.T4
TFTP_CHECKSUM=0
rommon 15 > tftpdnld
          IP_ADDRESS: 10.0.0.3
      IP_SUBNET_MASK: 255.0.0.0
     DEFAULT_GATEWAY: 10.0.0.1
         TFTP_SERVER: 10.0.0.2
           TFTP_FILE: c2800nm-adventerprisek9-mz.124-24.T4
        TFTP_VERBOSE: Progress
    TFTP_RETRY_COUNT: 18
        TFTP_TIMEOUT: 7200
       TFTP_CHECKSUM: No
        TFTP_MACADDR: 30:37:a6:49:35:a8
             FE_PORT: Fast Ethernet 0
       FE_SPEED_MODE: Auto
Invoke this command for disaster recovery only.
WARNING: all existing data in all partitions on flash: will be lost!
Do you wish to continue? y/n: [n]: y
ARP: address resolution for 10.0.0.2 timed out.
ARP failed with failure code 1. TFTP transfer aborted.
TFTP: Operation terminated prematurely.
rommon 16 >       " not found
rommon 17 >FE_SPEED_MODE=2
variable name contains illegal (non-printable) characters
rommon
rommon 18 > set
PS1=rommon ! >
FE_PORT=0
WARM_REBOOT=
RET_2_RTS=20:35:55 UTC Thu Sep 25 2014
BSI=0
RET_2_RCALTS=
RANDOM_NUM=1600357627
IP_ADDRESS=10.0.0.3
IP_SUBNET_MASK=255.0.0.0
DEFAULT_GATEWAY=10.0.0.1
TFTP_SERVER=10.0.0.2
TFTP_FILE=c2800nm-adventerprisek9-mz.124-24.T4
TFTP_CHECKSUM=0
?=0
rommon 19 > tftpdnld [ur]
usage: tftpdnld [-hr]
Use this command for disaster recovery only to recover an image via TFTP.
Monitor variables are used to set up parameters for the transfer.
(Syntax: "VARIABLE_NAME=value" and use "set" to show current variables.)
"ctrl-c" or "break" stops the transfer before flash erase begins.
The following variables are REQUIRED to be set for tftpdnld:
            IP_ADDRESS: The IP address for this unit
        IP_SUBNET_MASK: The subnet mask for this unit
       DEFAULT_GATEWAY: The default gateway for this unit
           TFTP_SERVER: The IP address of the server to fetch from
             TFTP_FILE: The filename to fetch
The following variables are OPTIONAL:
          TFTP_VERBOSE: Print setting. 0=quiet, 1=progress(default), 2=verbose
      TFTP_RETRY_COUNT: Retry count for ARP and TFTP (default=18)
          TFTP_TIMEOUT: Overall timeout of operation in seconds (default=7200)
         TFTP_CHECKSUM: Perform checksum test on image, 0=no, 1=yes (default=1)
          TFTP_MACADDR: The MAC address for this unit
               FE_PORT: 0= (default), 1
         FE_SPEED_MODE: 0=10/hdx, 1=10/fdx, 2=100/hdx, 3=100/fdx,
                        5=Auto (default)
      TFTP_DESTINATION: The flash destination device for the file
                        flash:(default), usbflash0:, usbflash1:
Command line options:
   -h: this help screen
   -r: do not write flash, load to DRAM only and launch image
rommon 20 > tftpdnld
          IP_ADDRESS: 10.0.0.3
      IP_SUBNET_MASK: 255.0.0.0
     DEFAULT_GATEWAY: 10.0.0.1
         TFTP_SERVER: 10.0.0.2
           TFTP_FILE: c2800nm-adventerprisek9-mz.124-24.T4
        TFTP_VERBOSE: Progress
    TFTP_RETRY_COUNT: 18
        TFTP_TIMEOUT: 7200
       TFTP_CHECKSUM: No
        TFTP_MACADDR: 30:37:a6:49:35:a8
             FE_PORT: Fast Ethernet 0
       FE_SPEED_MODE: Auto
Invoke this command for disaster recovery only.
WARNING: all existing data in all partitions on flash: will be lost!
Do you wish to continue? y/n: [n]: y
ARP: address resolution for 10.0.0.2 timed out.
ARP failed with failure code 1. TFTP transfer aborted.
TFTP: Operation terminated prematurely.
rommon 21 >

What I notice in the original post is this error
ARP: address resolution for 10.0.0.2 timed out.
which says that the router is looking for the 10.0.0.2 server but not getting response to its arp request. Can the original poster clarify for us how the device that has the image file is connected to the router that has the problem? Also what kind of device is 10.0.0.2? Is it a PC running TFTP server software or is it something else?
HTH
Rick

How can I query all the members of a group using querbuilder? I cannot find any related properties

How can I query all the members of a group using querbuilder? I cannot find any related properties describing members under /home/groups/s/sample_group in jcr repository.

Hi,
FieldPoint Explorer is no longer used to configure FieldPoint systems. However, I do not think that the configuring your system in FieldPoint Explorer is causing the error.
FieldPoint systems are now setup in Measurement and Automation Explorer (MAX). Information on setting up FieldPoint systems in MAX can be found in the MAX help under: Installed Products>> FieldPoint. Also, I recommend upgrading to the latest FieldPoint driver and version of MAX. The FieldPoint VI's will be slightly different when you upgrade, so there is a good chance that this will eliminate the error.
Regards,
Hal L.

I sent iTunes to trash. I was able to recover the program but have to "put back" songs one at a time. Is there any way to put back from trash using the "select all" command?

I sent iTues to trash by mistake (trying to delete files from "yesterday"). I got the program back but have to "put back" songs one at a time. Is there a way to put back multiple songs using the "select all" command or anything else? Thanks for the help.

The prgram is in one location and the library (media + library files) are in another. Sending it all to the trash would take some pretty delibrate multiple actions and digging through multiple folders, so I don't know how this was managed unless there's something in Snow Leopard that's new. Occasionally I have moved a file to the trash in Finder that I didn't want to and I can use Finder's "undo" to undo the last move. With many files...?

I can no longer use the keyboard shortcuts, 'command C' and 'command V'. Did I inadvertently do something to my keyboard or computer that caused this? Is there a way to fix it?

I can no longer use the keyboard shortcuts, 'command C' and 'command V'. Did I inadvertently do something to my keyboard or computer that caused this? Is there a way to fix it?

You can also check in System Preferences > Keyboard > Keyboard Shortcuts, make sure that custom shortcuts were not created using those same commands. If ones were, they could be creating a conflict. Step throuogh each of the items in the left list, checking the array presented in the right pane for each.

When I try to use the refine edge command I get this message could not complete the refine edge comm

when I try to use the refine edge command I get this message could not complete the refine edge command because of programe error

Quit the editor, then restart it while holding ctrl+alt+shift (command+option+shift on a mac). Keep the keys down till you see a window asking if you want to delete the settings file. You do.

What is use of Read-Text command in Sapscript plz replay

What is use of Read-Text command in Sapscript plz replay
i m geting problem with read-text command in sapscript as will as
perform and endperform .

Hi Majid,
It's a function module to read the texts from a text file. Generally it is used to retrieve the long texts.
The function module reads the desired text from the text file, the text memory, or the archive. You must fully specify the text using OBJECT, NAME, ID, and LANGUAGE. An internal work area can hold only one text; therefore, generic specifications are not allowed with these options.
After successful reading, the system places header information and text lines into the work areas specified with HEADER and LINES.
If a reference text is used, SAPscript automatically processes the reference chain and provides the text lines found in the text at the end of the chain. If an error occurs, the system leaves the function module and triggers the exception REFERENCE_CHECK.
CALL FUNCTION 'READ_TEXT'
EXPORTING
CLIENT = SY-MANDT
OBJECT = ?...
NAME = ?...
ID = ?...
LANGUAGE = ?...
ARCHIVE_HANDLE = 0
IMPORTING HEADER =
TABLES LINES = ?...
EXCEPTIONS ´
ID =
LANGUAGE =
NAME =
NOT_FOUND =
OBJECT =
REFERENCE_CHECK =
WRONG_ACCESS_TO_ARCHIVE =
Export parameters
Specify the client under which the text is stored. If you omit this parameter, the system uses the current client as default.
Reference field: SY-MANDT
Default value: SY-MANDT
OBJECT
Enter the name of the text object to which the text is allocated. Table TTXOB contains the valid objects.
Reference field: THEAD-TDOBJECT
NAME
Enter the name of the text module. The name may be up to 70 characters long. Its internal structure depends on the text object used.
Reference field: THEAD-TDNAME
ID
Enter the text ID of the text module. Table TTXID contains the valid text IDs, depending on the text object.
Reference field: THEAD-TDID
LANGUAGE
Enter the language key of the text module. The system accepts only languages that are defined in table T002.
Reference field: THEAD-TDSPRAS
ARCHIVE_HANDLE
If you want to read the text from the archive, you must enter a handle here. The system uses it to access the archive. You can create the handle using the function module ACHIVE_OPEN_FOR_READ.
The value '0' indicates that you do not want to read the text from the archive.
Reference field: SY-TABIX
Default value: 0
Import parameters:
HEADER
If the system finds the desired text, it returns the text header in this parameter.
Structure: THEAD
Table parameters:
LINES
The table contains all text lines that belong to the text read.
Structure: TLINE
Exceptions:
ID
The text ID specified in the parameter ID does not exist in table TTXID. It must be defined there together with the object of the text module.
LANGUAGE
The parameter LANGUAGE contains a language key that does not exist in table T002.
NAME
The parameter NAME contains the name of a text module that does not correspond to the SAPscript conventions.
Possible errors:
The field contains only blanks.
The field contains the invalid characters * or ,.
OBJECT
The parameter OBJECT contains the name of a text object that does not exist in table TTXOB.
NOT_FOUND
The system did not find the specified text module.
REFERENCE_CHECK
The text module to be read has no text lines of its own but refers to the lines of another text module. This reference chain can include several levels. For the current text, the chain is interrupted, that is, one of the text modules referred to in the chain no longer exists.
WRONG_ACCESS_ TO_ARCHIVE
The exception WRONG_ACCESS_TO_ARCHIVE is triggered if an archive is accessed using an incorrect or non-existing archive handle or an incorrect mode (that is, read if the archive is open for writing or vice versa).
Br,
laxmi.

Whenever I close down Photoshop CS5 I get the message: "Could not save Preferences because the file is locked or you do not have the necessary access privileges. Use the get info command in Finder to unlock the file or change permission on the file or enc

Whenever I close down Photoshop CS5 I get the message: "Could not save Preferences because the file is locked or you do not have the necessary access privileges. Use the get info command in Finder to unlock the file or change permission on the file or enclosing folders." What on earth does it mean? How can I stop this message from appearing?

See here:
I cannot save recent images.

What are the commands using in SAP ECC 6.0 ehp on SYBASE Database? Backup and restore commands?

Hi All,
What are the commands using in SAP ECC 6.0 ehp on SYBASE Database? Backup and restore commands?

Hi Jayachander,
Have a look at these sap notes:
For taking backup: Schedule from DB13 and get the exact command from Logs
1841993 - SYB: How to schedule backups in DBA Cockpit
1887068 - SYB: Using external backup and restore with SAP Sybase ASE
How to restore DB
1611715 - SYB: How to restore a Sybase ASE database server (Windows)
Divyanshu

Compare two pdf files using adobe acrobat through command line

Does anyone know how to compare two pdf files using adobe acrobat through command line. I want to do this via command line because we want to compare hundreds of file every day through some automated windows tasks.
If command line option is not available in acrobat, then is it feasible to make use of acrobat javascript API to do this task?
Any kind of help will be greatly.

Command-line: Not possible.
JavaScript: Possible, but very limited. Basically the only thing you can do is simulate clicking the Compare Documents button. The rest has to be done manually.
However, it *might* be possible to automate this process a bit more using a plugin. Ask over at the Acrobat SDK forum for more information...

Use of r3trans -d command in UNIX related to Database...?

Similar Messages

Maybe you are looking for