Use of Report Filters in a document to drive report content
I have a webi document that contains two reports, a summary report and a detail report. These two reports run off the same query. The question is, if I add report filters (not query filters) to the summary report, how can I dynamically refresh the detail report to use the same report filters, with out making the end user re-select the same report filters used in the summary report.
For example = I have a document that has a summary report that counts patients by location, in the same document I also have a detail report which uses the same query as the summary report, but prints the individual patients at each location.
I can add a report filter to the summary report, so I can filter on patients by *** code, which works great. But I would like the detail report to automatically pick up the report filter, so when I click on the detail report tab in my document, the detail report is also filtered on patient ***. I know that I can add the patient *** code report filter to the detail report and make the end user re-filter the detail report the same as the summary, I am just trying to see if it is possible to do this automatically.
So far have not found anyway to do this. I prefer not having to write two queries, one for summary and one detail if at all possible.
Hi Christopher,
If you select just one value and your users are able to type it in,
not having to select it via a drop down box, you might get it to work using input controls.
Create a new report variable (lets say for *** code) that will hold the selected value
Just create it with ="" and then place it in the input variables as a single value entry field
(note you have to select in the input controls now) an
You can use the contents of this variable in a report filter on the detail report,
you can add as many selection fields as you want, but you are not able to choose from a list of values...
Good luck,
Marianne
Similar Messages
-
I keep my photo files on a separate external hard drive, separate from my laptop hard drive. And I want to be able to use time machine as the back-up system to back up BOTH the computer's hard drive AND the external hard drive.... and i want all of the "back-up" information contained on a separate standalone external HD. So in the end, I have a 250GB computer hardrive, a 1TB external hardrive, and I want to have a 2nd external hard drive that will be the location to store the "back-ups" (using time machine) which will be either a 2TB or 3TB harddrive.
I am in dire need of help....Yes, just make sure that they are not excluded in Time Machine.
-
Report content surrounded by dashed line on preview
When we preview a report using CR2013, report content is surrounded by a dashed line. Is there any property through which we can disable it using RAS API?
Hi Saurabh,
Need more info.
- What version of VS?
- What version of CR (file version)?
- Win or web app?
- What happens when you exprot ther report from designer?
- What happens when you exprot the report from viewer?
- What happens when you export the report using ReportDocument.ExportToDisc?
- Bhushan
Senior Engineer
SAP Active Global Support
Follow us on Twitter
Got Enhancement ideas? Try the SAP Idea Place
Getting started and moving ahead with Crystal Reports .NET applications. -
I have a Microsoft Word template I want to populate programmatically with test data. The template contains both explanatory text and a data sheet section with test data placeholders (bookmarks). Using the Report Generation Toolkit for Microsoft Office, I have been able to successfully populate the placeholders with data and save the results into a new Microsoft Word document. The problem is the new Word document contains not only the test data but also the explanatory text that was in the original document template. Ideally, I would like to have the generated document contain just the test data without the accompanying text. Is it possible to do this usi
ng the Report Generation Toolkit?Hello Ryan,
Two easy options come to mind.
1. You may want to consider using an �ink annotation� instead of regular text for your explanation.
2. You can programmatically do a find and replace on the explanatory text. Have LabVIEW find the whole paragraph, and replace it with nothing.
If none of these suggestions help, or if I�m not correctly understanding your issue, please reply with comments or answers to the discussion above and any additional information that may help, and I�ll be happy to look further into it.
Have a nice day!
Robert Mortensen
Applications Engineer
National Instruments
Robert Mortensen
Software Engineer
National Instruments -
I have researched the knowledge base and found:
Printing A Range of Pages or Number of Copies of a Report Using the Report Generation Toolkit in LabVIEW.
This seems to be from a previous version of LV. I am using LV2010. The instructions given do not match up with the current vi. The information did provide a tip and drilling down into the vi I was able to insert the from/to page numbers at the printout invoke method, however this prevents the print function from working in that it can no longer find the default printer.
The error message is:
Error 1015 occurred at NI_ReportGenerationToolkit.lvlib:Word_Print.vi -> NI_Word.lvclassrint Report.vi ->
error 1015 is: Printer is not responding. Check printer configuration.
Any ideas how I can make the modification to print, for example, pages 24 through 29 out of a 32 page word document?
Thanks,
ChrisHello, take a look at this article. Unfortunately the Generate Report Get Data to Modify.vi was remove since RGT 1.1.3 release. That being said, we can try to find a workaround. See "Configuring a Printer Through the Windows Dialog in LabVIEW", open the GetPrinterSettings.vi, at the PrinterSettings property node you can select the from/to page. I hope this helps.
Alejandro | Academic Program Engineer | National Instruments -
Get error when preview marketing documents by using crystal report layout
Hi experts,
I want to switch to using Crystal Report for marketing documents layout. I have import Sales Quotation u2013 Generic (CR) layout which provided by XX-1.2.b1p package. I can preview added records but it doesn't work on drafting documents and saved drafts. The system prompt u201CThe system cannot find the path specifiedu201D and u201CObject reference not set to an instance of an objectu201D. On the same server, it was working fine in our other company database. I don't think this is the problem of database location setting in Crystal Report. Can anyone give me advices, thanks!
Regards,
IvanHi! Rahul,
Thank you for your reply first. Your method doesn't work in my case. Can you tell me the steps of creating a new layout for added records and draft documents. I have created a quotation layout which work with added records only, the steps has been show below and please comments, thanks.
1. In Crystal Report > new blank report > create new connection > Choose "SAP Business One" > Select OQUT under "B1 Tables".
2. Insert "CardName" field to report > Create DocKey@ parameter and set it equal to DocEntry in select expert record function
3. Click Add-ins > SAP Business One > Save > Choose company database and input manager password.
Regards,
Ivan -
Error when using the report context menu option Goto - Documents
Hi gurus,
I'm doing some report tests via Analyzer and when a try to use de context menu option "Goto -> Documents" and try to create a new document, the following errors occur:
"CANNOT GET THE FOLDER FOR ASSIGNMENT"
"ERROR WHILE LAUNCHING NEW DOCUMENT DIALOG"
I'm using the nw2004s version. Could someone help me out?
Thanks in advance.Hi Thaigo,
We are also having the same problem with 2004s SP9 and SP10.
1. All the 0TCA* are active.
2. Super admin role is assigned.
But still getting the above three errors. Somebody who have overcome this problem please share the corresponding changes to be made in KM Configuration
Thanks and Regards
Giri Nath -
How can I use a report as a filter that accepts a prompt value in R18?
In R17 the following setup worked properly. 1) have a main report that uses another report as a filter report. 2) In the filter report, add a criteria statement which is prompted. 3) pass an argument from a web link or embedded web applet on the report URL using the field reference from the filter report criteria prompt. However, in R18 this no longer works. The filter report does not bring back a set of id's that is used for filtering the main report. The main report just displays all records as if there is no filter criteria supplied. Has anyone else encountered this behavior in R18?
I'm trying to figure out how I can use a simple class
I have written with methods and properties in Sutdio
Creator.
I have been looking around, but I've only found how
to use an EJB directly from Creator. We would like to
use a bean that handles all the connections to the
app server and only returns the result to the JSP.
I know there has to be a way to do this, if anybody
has any ideas please help!I'm not sure I follow 100%, but you can use POJOs via Spring integration. Do a search on this forum for Spring and you should find a tutorial I wrote on it a while back. -
How to use the Report Generation Toolkit to get a list of bookmarks in a Word Template
I am working on a project where I will need to use the Report Generation Toolkit to fill out a fairly long Word Template. The MS Office Report Express VI can only have inputs for a maximum of 17 bookmarks which is not nearly enough for what I am needing to do.
I'm wondering if there is some way to use the lower level report generation VIs to read the word template and return a list of the bookmark names as a 1d array of string. The dialog box that you use to set up the Express VI has this capability but I'm not finding a way to scan the document programatically.
I'm sure I can't be the first person to run into this issue and I'm hoping that someone out there has found a good solution.
Solved!
Go to Solution.Wordsub.llb should be somewhere in your Labview folder on your local drive. The path to it in my install is: C:\Program Files\National Instruments\LabVIEW 8.6\vi.lib\addons\_office\_wordsub.llb
Also what specific problem are you referring to about 17 bookmarks? Is that the limit on the express style VI for filling them in from LV? If so what you will need to do is to use the lower level function 'Word Insert Field' under Word Advanced VIs. You will need to supply the VI the name of the bookmark and the text you want to insert. -
Using crystal reports to generate invoices
Post Author: samme
CA Forum: General
I'm writing a report for a client who wants to print multiple invoices using crystal reports. The invoice needs to sort in date order, one date and information associated with that date on each page. Each page has a subtotal since multiple items/services are linked ot one date. The last page of the invoice needs to have the total and should at the bottom of the page with the last subtotal. Not onlastrecord does not work because if the user prints multiple invoices, crystal doesn't see the "last record" until the last record of the last invoice.
The client wants the normal invoice information on the first page of the invoice: Company Logo, Customer Address, Company Info, Invoice #, Date, etc. as well as the column headers - quantity, unit of measure, price, etc.
On all other pages of the invoice, the client wants, the company logo, the invoice # and the column headers.
I have the report grouped by invoice number and then by a date formula. I cannot seem to get where I need to be with this invoice and have been working on it for some time. Can anyone give me some direction please.....
Thanks in advance!On Sat, 15 Mar 2003 16:46:48 GMT, "Bill Bradley"
<[email protected]> wrote:
>I know. We thought that the Report Builder would be the way to go,
since
>ART didn't do too much for us. You guys poorly document it, and,
show no
>examples of using it to build a report. In addition, it'd be nice if
>SOMEONE would come up with a list of what tables show what. While
Novell
>may have a detailed list of things in the ZFD docs, it's pretty much
so
>detailed and complex that, it's next to useless. I've resorted to
doing
>huge dumps of things to a csv, then, using CR or Excel to generate
some kind
>of report.
>
>The whole process is not as easy as it should be, seeing that we paid
money
>to get a reporting vehicle.
>
>As comparison, SMS isn't any easier, but, there's more documentation
on it,
>so, when you're forced to roll your own report, it's a clearer
path...
I do understand, I'm not a programmer either :-(
the company who wrote report builder is Digital Metaphors, they have a
very good
training application and additional detailed information of how to
write
reports.
The CIM schema is I agree Cr** (well not easy) and without the detail
that
Novell provide it doesn't work.
I hope that a friend of mine is going to provide the compromise that
you and I
are looking for. Namely the ability to create the SQL queries that
ART can
make, with a simple report system. Keep an eye on caledonia.net for
an
announcement for ART4 (Derived from but unrelated to Salford
Software's
product) :-)
Tim
No Direct e-Mail Please!
Tim Heywood
Independent Consultant
Scotland
Novell Support Connection SYSOP
In theory, practice and theory are the same,
In practice they are different! -
Error while using Before report trigger. -- Urgent
Dear All,
The following error I am getting when I execute my data template where I have used Before Report Trigger. I am also pasting the Data Template that I have developed.
============================
Error
============================
XDO Data Engine Version No: 5.6.3
Resp: 20560
Org ID : 204
Request ID: 4846248
All Parameters: P_LOB=01:P_DIV_FROM=:P_DIV_TO=:P_FROM_ORG=:P_TO_ORG=:P_INV_FROM=:P_TO_INV=:P_TRX_DATE_FROM="2003/01/01 00:00:00":P_TRX_DATE_TO="2003/01/15 00:00:00"
Data Template Code: SSBWIPANA_MFGR
Data Template Application Short Name: WIP
Debug Flag: N
{P_DIV_FROM=, P_TRX_DATE_TO=2003/01/15 00:00:00, P_DIV_TO=, P_FROM_ORG=, P_TO_ORG=, P_TRX_DATE_FROM=2003/01/01 00:00:00, P_INV_FROM=, P_LOB=01, P_TO_INV=}
Calling XDO Data Engine...
[122407_011745100][][EXCEPTION] SQLException encounter while executing data trigger....
java.sql.SQLException: ORA-06550: line 2, column 12:
PLS-00302: component 'P_LOB' must be declared
ORA-06550: line 2, column 1:
PL/SQL: Statement ignored
ORA-06550: line 3, column 12:
PLS-00302: component 'P_DIV_FROM' must be declared
ORA-06550: line 3, column 1:
PL/SQL: Statement ignored
ORA-06550: line 4, column 12:
PLS-00302: component 'P_DIV_TO' must be declared
ORA-06550: line 4, column 1:
PL/SQL: Statement ignored
ORA-06550: line 5, column 12:
PLS-00302: component 'P_FROM_ORG' must be declared
ORA-06550: line 5, column 1:
PL/SQL: Statement ignored
ORA-06550: line 6, column 12:
PLS-00302: component 'P_TO_ORG' must be declared
ORA-06550: line 6, column 1:
PL/SQL: Statement ignored
ORA-06550: line 7, column 12:
PLS-00302: component 'P_FROM_INV' must be declared
ORA-06550: line 7, column 1:
PL/SQL: Statement ignored
ORA-06550: line 8, column 12:
PLS-00302: component 'P_TO_INV' must be declared
ORA-06550: line 8, column 1:
PL/SQL: Statement ignored
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:331)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:288)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:743)
at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:215)
at oracle.jdbc.driver.T4CCallableStatement.executeForRows(T4CCallableStatement.java:967)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1168)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3327)
at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3433)
at oracle.jdbc.driver.OracleCallableStatement.execute(OracleCallableStatement.java:4394)
at oracle.apps.xdo.dataengine.XMLPGEN.executeTriggers(XMLPGEN.java:699)
at oracle.apps.xdo.dataengine.XMLPGEN.processData(XMLPGEN.java:254)
at oracle.apps.xdo.dataengine.XMLPGEN.processXML(XMLPGEN.java:205)
at oracle.apps.xdo.dataengine.XMLPGEN.writeXML(XMLPGEN.java:237)
at oracle.apps.xdo.dataengine.DataProcessor.processData(DataProcessor.java:364)
at oracle.apps.xdo.oa.util.DataTemplate.processData(DataTemplate.java:236)
at oracle.apps.xdo.oa.cp.JCP4XDODataEngine.runProgram(JCP4XDODataEngine.java:293)
at oracle.apps.fnd.cp.request.Run.main(Run.java:157)
=====================================================
Data Template
====================================================
<dataTemplate name="SSBWIPANA_MFGR" defaultPackage="PRODUCTION" version="1.0">
<parameters>
<parameter name="P_LOB" datatype="charecter"/>
<parameter name="P_DIV_FROM" datatype="charecter"/>
<parameter name="P_DIV_TO" datatype="charecter"/>
<parameter name="P_FROM_ORG" datatype="charecter"/>
<parameter name="P_TO_ORG" datatype="charecter"/>
<parameter name="P_FROM_INV" datatype="charecter"/>
<parameter name="P_TO_INV" datatype="charecter"/>
<parameter name="P_TRX_DATE_FROM" datatype="charecter"/>
<parameter name="P_TRX_DATE_TO" datatype="charecter"/>
</parameters>
<dataQuery>
<sqlStatement name="Q_1">
<![CDATA[SELECT DISTINCT MSI.CONCATENATED_SEGMENTS, MMT.INVENTORY_ITEM_ID,
MSI.DESCRIPTION, MMT.TRANSACTION_UOM, SDT.TRX_DATE,
MTP.ORGANIZATION_CODE, MMT.ORGANIZATION_ID
FROM MTL_MATERIAL_TRANSACTIONS MMT,
MTL_PARAMETERS MTP,
MTL_SYSTEM_ITEMS_VL MSI,
SSBWIP_DATE_TEMP SDT
WHERE MMT.INVENTORY_ITEM_ID = MSI.INVENTORY_ITEM_ID
AND MMT.ORGANIZATION_ID = MSI.ORGANIZATION_ID
AND MSI.ORGANIZATION_ID = MTP.ORGANIZATION_ID
AND MMT.ORGANIZATION_ID = MTP.ORGANIZATION_ID
AND MMT.TRANSACTION_TYPE_ID IN (17, 44)
AND MMT.ORGANIZATION_ID IN (
SELECT MP.ORGANIZATION_ID
FROM MTL_PARAMETERS MP, GL_CODE_COMBINATIONS GCC
WHERE MP.MATERIAL_ACCOUNT = GCC.CODE_COMBINATION_ID
AND GCC.SEGMENT1 = :P_LOB
AND (GCC.SEGMENT2 BETWEEN NVL (:P_DIV_FROM,
GCC.SEGMENT2)
AND NVL (:P_DIV_TO, GCC.SEGMENT2)
AND MTP.ORGANIZATION_CODE BETWEEN NVL (:P_FROM_ORG,
MTP.ORGANIZATION_CODE
AND NVL (:P_TO_ORG,
MTP.ORGANIZATION_CODE
AND MSI.CONCATENATED_SEGMENTS BETWEEN NVL
(:P_FROM_INV,
MSI.CONCATENATED_SEGMENTS
AND NVL
(:P_TO_INV,
MSI.CONCATENATED_SEGMENTS
ORDER BY MSI.CONCATENATED_SEGMENTS, MTP.ORGANIZATION_CODE]]>
</sqlStatement>
<sqlStatement name="Q_2">
<![CDATA[SELECT NVL (SUM (TRANSACTION_QUANTITY), 0) COMPLETION
FROM MTL_MATERIAL_TRANSACTIONS
WHERE INVENTORY_ITEM_ID = :INVENTORY_ITEM_ID
AND ORGANIZATION_ID = :ORGANIZATION_ID
AND TRANSACTION_TYPE_ID = 44
AND TRUNC (TRANSACTION_DATE) = :TRX_DATE]]>
</sqlStatement>
<sqlStatement name="Q_3">
<![CDATA[SELECT NVL (SUM (TRANSACTION_QUANTITY) * -1, 0) INCOMPLETION
FROM MTL_MATERIAL_TRANSACTIONS
WHERE INVENTORY_ITEM_ID = :INVENTORY_ITEM_ID
AND ORGANIZATION_ID = :ORGANIZATION_ID
AND TRANSACTION_TYPE_ID = 17
AND TRUNC (TRANSACTION_DATE) = :TRX_DATE]]>
</sqlStatement>
<sqlStatement name="Q_4">
<![CDATA[SELECT DESCRIPTION
FROM FND_FLEX_VALUES_VL
WHERE FLEX_VALUE_SET_ID = 1002470
AND FLEX_VALUE = :P_LOB]]>
</sqlStatement>
<sqlStatement name="Q_5">
<![CDATA[SELECT DESCRIPTION
FROM FND_FLEX_VALUES_VL
WHERE FLEX_VALUE_SET_ID = 1012471
AND FLEX_VALUE = :P_DIV_FROM
AND PARENT_FLEX_VALUE_LOW = :P_LOB]]>
</sqlStatement>
<sqlStatement name="Q_6">
<![CDATA[SELECT DESCRIPTION
FROM FND_FLEX_VALUES_VL
WHERE FLEX_VALUE_SET_ID = 1012471
AND FLEX_VALUE = :P_DIV_TO
AND PARENT_FLEX_VALUE_LOW = :P_LOB]]>
</sqlStatement>
</dataQuery>
<dataTrigger name="beforeReport" source="PRODUCTION.beforereporttrigger(:P_TRX_DATE_FROM,:P_TRX_DATE_TO)"/>
<dataStructure>
<group name="G_CONCATENATED_SEGMENTS" source="Q_1">
<element name="CONCATENATED_SEGMENTS" datatype="charecter" value="CONCATENATED_SEGMENTS"/>
<element name="DESCRIPTION" datatype="charecter" value="DESCRIPTION"/>
<element name="TRANSACTION_UOM" datatype="charecter" value="TRANSACTION_UOM"/>
<element name="INVENTORY_ITEM_ID" datatype="number" value="INVENTORY_ITEM_ID"/>
<element name="ORGNIZATION_ID" datatype="number" value="ORGANIZATION_ID"/>
<group name="G_TRX_DATE" source="Q_1">
<element name="TRX_DATE" datatype="date" value="TRX_DATE"/>
<group name="G_1" source="Q_1">
<element name="ORGANIZATION_CODE" datatype="charecter" value="ORGANIZATION_CODE"/>
<group name="G_ORGANIZATION_CODEC" source="Q_2">
<element name="COMPLETION" datatype="number" value="COMPLETION"/>
</group>
<group name="G_ORGANIZATION_CODEI" source="Q_3">
<element name="INCOMPLETION" datatype="number" value="INCOMPLETION"/>
</group>
</group>
</group>
</group>
<group name="G_LOB" source="Q_4">
<element name="CF_LOB" datatype="charecter" value="description"/>
</group>
<group name="G_FROM_DIV" source="Q_5">
<element name="CF_DIVFROM" datatype="charecter" value="description"/>
</group>
<group name="G_TO_DIV" source="Q_6">
<element name="CF_DIVTO" datatype="charecter" value="descrption"/>
</group>
<element name="CS_COUNT" function="count()" datatype="number" value="G_CONCATENATED_SEGMENTS.CONCATENATED_SEGMENTS"/>
</dataStructure>
</dataTemplate>
Pls. suggest me.
nullHi,
without checked the whole document .... you've defined all paramaters as datataype charecter instead of character.
Regards
Rainer -
Problem using Interactive Report in Application Express 3.2.1.00.11
Hi All ,
I am using Interactive Report in Application Express 3.2.1.00.11
I have made report as editable by using following query
Select ROWID,
APEX_ITEM.CHECKBOX(1,IDSKILL,'UNCHECKED') "Mark",
APEX_ITEM.TEXT(2,IDSKILL)"IDSKILL",
APEX_ITEM.TEXT(3,SKILL) "SKILL",
APEX_ITEM.SELECT_LIST_FROM_LOV(4,IDBEARBEITER,'DIR_LOV'),
APEX_ITEM.TEXT(5,ÄNDERUNGSDATUM)"ÄNDERUNGSDATUM"
from SKILLS
Problem :-
When I click FILTER option in Interactive Report , It is taking under Expression "<input type="text" name="f03" size="20" maxlength="2000" value="ARIS" />" and displaying in search filter as
Skill = '<input type="text" name="f03" size="20" maxlength="2000" value="ARIS" />'
Can I make display like Skill ="ARIS"
Any suggestion is welcom ..
Thanks in advance
Cheers
Sachin SrivastavaHi,
As I know there is no fix/workaround for that.
Disable filtering and other stuff is only. But I think you of course like have filters and other nice thing of interactive report. Other vice you have done classic report.
It is better use classic report and build own custom filers.
Br, Jari -
Cross browser issue using ajax report pull
Hi,
I have an application working using ajax report pull.
Entire application is based on ajax and its currently released.
Its performance is good. It works fine with mozilla but in ie,
links and buttons are not working.
my code is as follows:
var container = document.getElementById("divlayer");
container.innerHTML="";
var l_Val = document.getElementById('P15_ID').value;
var l_Val1 = document.getElementById('P15_REGION').value;
var l_Val2 = document.getElementById('P15_COUNTRY').value;
var get = new htmldb_Get(null,html_GetElement('pFlowId').value,null,10);
get.add('P15_GSI_PARTY_ID',l_Val);
get.add('P10_ID',l_Val);
get.add('P10_REGION',l_Val1);
get.add('P10_COUNTRY',l_Val2);
get.add('P10_ROWS',l_Val3);
get.add('P15_REGION',l_Val1);
get.add('P15_COUNTRY',l_Val2);
get.add('P15_ROWS',l_Val3);
gReturn = get.get(null,'<htmldb:BOX_BODY>','</htmldb:BOX_BODY>');
get = null;
document.getElementById("divlayer").style.visibility='visible';
document.getElementById("divlayer").style.display='block';
var elem = document.createElement('div');
elem.id='d1';
elem.innerHTML=gReturn;
container.appendChild(elem);
The links with doSubmit is not submitting to the same page in ie.
Please help me.
Thanks,
NivedithaHello Niveditha,
There're some differences in browsers... so yes it's possible that it doesn't work with the same code in another browser. The good news is that most of time there're workaround.
When I look at your code, you could already change document.getElementById() by $x(), which is doing the same, but comes from the APEX framework.
Do you have an idea where it fails in IE? Are you using the Developer Toolbar? Maybe that gives you more insights. You could also put some alert('hello 1'); in your code to see what's happening and how far it comes.
If you put it on apex.oracle.com we can have a look into more detail.
Dimitri
-- http://dgielis.blogspot.com
-- http://apex-evangelists.com -
How can I use the report CRMC_ORGMAN_SWITCH_TO_ENH_MODEL
Dear all,
I want to change the CRM organization from stardard version to enhanced version.Acoording to the help document, we must using the report CRMC_ORGMAN_SWITCH_TO_ENH_MODEL.But neither this transaction code nor this program in CRM system.Do you have any suggestion, Thank you very much.
The help document is "http://help.sap.com/saphelp_crm60/helpdata/en/32/4473211b7778428efebc865e351cb4/content.htm"Hi
Please check if you do have the authorization for transaction
CRMC_SWITCH_ORGMODEL.
Transaction CRMC_SWITCH_ORGMODEL switches the organizational
structure being used in CRM to a new model. This process is irreversible
and therefore an accidental execution of the transaction should be
avoided. This may be the reason why you can not execute the report.
For further details review note 0635401 and the check if following notes
are valid for you.
650001,635339,635182
Hope it can help you.
Best Regards,
ZhaoJie -
Using crystal reports to pull ZfD3 inventory information
Is it possible to use Crystal Reports to pull information from the
ZfD3
database? If so, what version of Crystal is recommended, and how
should
crystal be configured to connect to the database?
thank you
TomOn Sat, 15 Mar 2003 16:46:48 GMT, "Bill Bradley"
<[email protected]> wrote:
>I know. We thought that the Report Builder would be the way to go,
since
>ART didn't do too much for us. You guys poorly document it, and,
show no
>examples of using it to build a report. In addition, it'd be nice if
>SOMEONE would come up with a list of what tables show what. While
Novell
>may have a detailed list of things in the ZFD docs, it's pretty much
so
>detailed and complex that, it's next to useless. I've resorted to
doing
>huge dumps of things to a csv, then, using CR or Excel to generate
some kind
>of report.
>
>The whole process is not as easy as it should be, seeing that we paid
money
>to get a reporting vehicle.
>
>As comparison, SMS isn't any easier, but, there's more documentation
on it,
>so, when you're forced to roll your own report, it's a clearer
path...
I do understand, I'm not a programmer either :-(
the company who wrote report builder is Digital Metaphors, they have a
very good
training application and additional detailed information of how to
write
reports.
The CIM schema is I agree Cr** (well not easy) and without the detail
that
Novell provide it doesn't work.
I hope that a friend of mine is going to provide the compromise that
you and I
are looking for. Namely the ability to create the SQL queries that
ART can
make, with a simple report system. Keep an eye on caledonia.net for
an
announcement for ART4 (Derived from but unrelated to Salford
Software's
product) :-)
Tim
No Direct e-Mail Please!
Tim Heywood
Independent Consultant
Scotland
Novell Support Connection SYSOP
In theory, practice and theory are the same,
In practice they are different!
Maybe you are looking for
-
Problem in refurbishment processing while creating GR.
Dear experts, I'm working on refurbishment processing. I have done all the steps as below: I have a material for equipment for which I have 3 valuation types: C1 - New items C2 - Repaired Items C3 - Damaged Items. 1. Equipment creation with serial nu
-
Updated to snow leopard and now get blue screen
Hi there, I recently updated to snow leopard and now I get blue screen on start-up. I manage to get to enter my password and then to my desktop for a few seconds before it flicks back to my login. I tried using disk utility from the install disc and
-
COPA report & G/L balance misatched
Dear Experts, Will u pls explain me when i see G/L balance of Domestic Sales(G/l number 500000) it come 200050.If i check it through COPA report in same period/year,distribution channel of Domestic sale it shows me different figure.In the COPA repo
-
Can anyone help me with a white screen on boot, chime and unresponsive keyboard
As stated in the title it boots up with a white screen and it chimes but i cant use any of the commands to get into the recovery or even boot from a cd or usb drive. I've taken out the hdd and put it back it and it doesnt seem to be the problem. Is t
-
ODBC Data Source Aministrator - new data source- error - SAP BO XI 3.1 SP3
Hello there, when adding a new mySQL data source to the ODBC Data Source Aministrator on the server we recieve the following error message: The setup routines for the MySQL ODBC 5.1 Driver ODBC driver could not be loaded due to system error code 126: