Use of RRKMULTIPROVHINT table in multiprovide

Hi All,
Could you explain me what is the use of the above table?
I was reading a document named "How to create efficient multiprovider queries". It says
In the RRKMULTIPROVHINT table, you can specify the MultiProvider and a
characteristic for partitioning and if a query has restrictions on this characteristic, the, OLAP processor will check which InfoCubes can return data for the query. The data,manager can then completely ignore the remaining InfoCubes. This is handled by the OLAP processor.
What I would like to know in our office we have one multi provider where data comes 3 basic infocubes( say 1 cube has asia data,2 nd one europe, 3rd one africa data). How can I use this table so that when user selects example Asia content (variable created for continent), it should use corresponding infocube only?
Thanks in advance
Sriya

Hi Shriya,
Note 911939 describes a way by using the table RRKMULTIPROVHINT, where I can map a characteristic for partitioning to a multicube.
Note 629541 shows a way by defining structure-specific properties for an infocube, where I can set constant values for a charakteristic during the design phase of a infocube. This is a very static way and allows no changes, when the cube contains data.
link:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/751be690-0201-0010-5e80-f4f92fb4e4ab
thread:
Multiprovider
regards,
Supriya

Similar Messages

Use of RRKMULTIPROVHINT in multiprovider

Hi All,
Could you explain me what is the use of the above table?
I was reading a document named "How to create efficient multiprovider queries". It says
In the RRKMULTIPROVHINT table, you can specify the MultiProvider and a
characteristic for partitioning and if a query has restrictions on this characteristic, the, OLAP processor will check which InfoCubes can return data for the query. The data,manager can then completely ignore the remaining InfoCubes. This is handled by the OLAP processor.
What I would like to know in our office we have one multi provider where data comes 3 basic infocubes( say 1 cube has asia data,2 nd one europe, 3rd one africa data). How can I use this table so that when user selects example Asia content (variable created for continent), it should use corresponding infocube only?
Thanks in advance
Sriya

The same question already raised in bex explorer forum.

Role of "Maxor" field in RRKMULTIPROVHINT table

Hello Everyone,
We have the "Maxor" field in RRKMULTIPROVHINT table. The description of the field is given as
"The table RRKMULTIPROVHINT now contains the field MAXOR.
With this field, you can determine for each characteristic how many rows the WHERE condition of the test reading may have."
I am not very clear with the definition. If my Multiprovider contain Cubes which are partitioned on "Country", then the entry in hint table would be
MPRO name: Identifying Characteristic (Country): Counter: Maxor
How would a value in Maxor field affect my query?
Regards,
Abhishek

A similar thread...
RRKMULTIPROVHINT-MAXOR - example of use
no answers there too!!!
Note : Note 1156681 - Enhancements in MultiProvider hint RSRMULTIPROVHINT might be of help...
Edited by: Arun Varadarajan on Oct 22, 2009 1:33 AM

How to use customer extension table for schedule line for shopping cart ?

Dear Experts,
One of our client wants to have schedule lines in shopping cart item. I am thinking of using customer extension table at item level for shopping cart. Could you please help me on how I should proceed with the appending the structures so that the end user can fill the shopping cart schedule line details?
Which fields should I consider in such cases?
Thanks and regards,
Ranjan

Hi.
I guess you use SRM 7.0. Please go to IMG.
SRM -> SRM Server -> Cross-Application Basic Settings -> Extensions and Field Control (Personalization) -> Create Table Extensions and Supply with Data
Regards,
Masa

How do I use the option "table view" in NetWeaver 2004s Query Designer?

Dear,
We have used NetWeaver 2004s Query Designer, We found a strange problem. The option to select table view is not available. It is greyed out. How can you select table view (tabular) in 2004s Query Designer?
I have read the help doc about tabular view of NetWeaver 2004s Query Designer, I check my query, it has only one structure . but the option is still greyed out. I rebuild the query with 3.x Query Designer in tabular view, and reopen it with 2004s Query Designer, So there is a tab named "tabular view" display, but the option to select table view is still not available, and when users view the query result in web , it is still not in tabular view display. So I am confused, is there a bug with NetWeaver 2004s Query Designer?
Please help me. Thanks!

Note 1002271. Seach this note to use key word "table view"

How to create olap cube using Named Query Table in Data source View

I Create on OLAP Cube using Existing Tables Its Working Fine But When i Use Named Query Table with RelationShip To other Named query Table It Not Working .So give me some deep Clarification On Olap Cube for Better Understanding
Thanks

Hi Pawan,
What do you mean "It Not Working"？ As Kamath said, please post the detail error message, so that we can make further analysis.
In the Data Source View of a CUBE, we can define a named query. In a named query, you can specify an SQL expression to select rows and columns returned from one or more tables in one or more data sources. A named query is like any other table in a data source
view (DSV) with rows and relationships, except that the named query is based on an expression.
Reference:Define Named Queries in a Data Source View (Analysis Services)
Regards,
Charlie Liao
TechNet Community Support

How to use single buffered table with FOR ALL ENTRIES KEYWORD

Hai,
I'm Using TJ02T Database table, It is single buffered table but at the same time I want to use FOR ALL ENTRIES KEYWORD , Please Help me.
Regards,
S.Janani

Hi,
FOR ALL ENTRIES will not depend on the buffering nature of the table. The single buffered table will only only buffer one record into memory. You can still use the statement to query the values, but it may have performance problems if the data volume is high since the records are not completely buffered into memory, the time will spent in getting data from DB.
Thanks..
Preetham S

How to use PL/SQL table

Hi all,
can you guys suggest me how can I use pl/sql tables for the below query to incresing the performance.
DECLARE
    TYPE cur_typ IS REF CURSOR;
    c           cur_typ;
    total_val varchar2(1000);
    sql_stmt varchar2(1000);
    freeform_name NUMBER;
    freeform_id NUMBER;
    imgname_rec EMC_FTW_PREVA.EMC_Image_C_Mungo%rowtype;
    imgval_rec EMC_FTW_PREVA.EMC_Content_C_Mungo%rowtype;
    CURSOR imgname_cur IS
        select * from EMC_FTW_PREVA.EMC_Image_C_Mungo
        where cs_ownerid in (
                    select id from EMC_FTW_PREVA.EMC_Image_C
                    where updateddate > '01-JUN-13'
                    and path is not null
                    and createddate != updateddate)
        and cs_attrid = (select id from EMC_FTW_PREVA.EMC_ATTRIBUTE where name = 'Image_Upload');
BEGIN
    OPEN imgname_cur;
    LOOP
      FETCH imgname_cur INTO imgname_rec;
      EXIT WHEN imgname_cur%NOTFOUND;
      total_val := 'EMC_Image_C_' || imgname_rec.cs_ownerid;
      sql_stmt := 'SELECT instr(textvalue,''' || total_val || '''), cs_ownerid FROM EMC_FTW_PREVA.EMC_Content_C_Mungo a Where cs_attrid = (select id from EMC_FTW_PREVA.EMC_ATTRIBUTE where name = ' || '''' || 'Body_freeform' || '''' || ')';
        OPEN c FOR sql_stmt;
        LOOP
          FETCH c INTO freeform_id,freeform_name;
          EXIT WHEN c%NOTFOUND;
                                  IF freeform_id > 0 THEN
            dbms_output.put_line (imgname_rec.cs_ownerid || ',' || total_val || ',' || freeform_id || ',' || freeform_name);
                                  END IF;
        END LOOP;
        CLOSE c;
   END LOOP;
   CLOSE imgname_cur;
END;
Thanks in Advance.

can you guys suggest me how can I use pl/sql tables for the below query to incresing the performance.
There would be absolutely no point at all in improving the performance of code that has NO benefit.
The only result of executing that code is to possibly produce some lines of output AFTER the entire procedure if finished:
dbms_output.put_line (imgname_rec.cs_ownerid || ',' || total_val || ',' || freeform_id || ',' || freeform_name);
So first you need to explain:
1. what PROBLEM you are trying to solve?
2. why you are trying to use PL/SQL code to solve it.
3. why are you using 'slow by slow' (row by row) processing and then, for each row, opening a new cursor to query more data?
You should be using a single query rather than two nested cursors. But that begs the question of what the code is even supposed to be doing since the only output is going to a memory buffer.

How can i print reports to different printer by use Trigger on table after insert

Hello,
Please can any one tell me how can i print (any message) to different printer (network & local printer) by use Trigger on table after insert.
regards,
Linda.

What you want to do cannot be done with PL/SQL, which does have any print utilities. However you could write something using Java Stored Procedures.
Of course the "different printer" bit will have to be data driven as triggers are not interactive.
rgds, APC

How to load the data using a plsql table in ODI.

Hi All ,
Can anyone help me on this ?
We have a PLSQL procedure which returns a plsql table as out parameter.
We are supposed to load the data in to a file using this plsql table (Table type) in ODI.
Can this be done using ODI?
Regards,
Karthik+

Hi,
We have one process with a ref cursor (Oracle) as a source and remote Oracle DB as a target. I ended up writing my own KM that populates a global temporary table from the cursor first and then transfers the data to target. If temporary table is an option for you, the rest is pretty easy.
Regards.

Error while loading metadata in HPCM application using Import Staging table

Hello All,
I was loading metadata in HPCM using Import Staging table. I successfully uploaded Driver Definition metadata.
However while loading "Driver Exception" metadata, I am not able to load it successfully. I have checked the HPCM logs but found nothing. I then checked the "Import Exception" table and found the following error message.
ERROR_POPULATED_DIM_COLUMNS_DO_NOT_MATCH_STAGE_DEFINITIONCan anyone please help me with this.
Regards,
-SM

It is a bug and there is a patch available.
Oracle Support - "Bug 12905298 : INTERFACE FAILS TO INTEGRATE ON STEP "LOAD DATA INTO PLANNING"
Patch = 12905298: INTERFACE FAILS TO INTEGRATE ON STEP "LOAD DATA INTO PLANNING"
Cheers
John
http://john-goodwin.blogspot.com/

Error occured while provisioning using Database Application Table connector

Hi,
I am trying to provision using Database Application Table connector and OIM 10g. Provisioning is successful but the child data is not sitting in the database. Getting the below error
Response: GCPROV.ProvTransportProvider.DBProvisioningTransport.The column key_id does not exist in the target
Response Description: Unknown response received
Notes:
Assigned to Group : SYSTEM ADMINISTRATORS
Error Details
Setting task status... "GCPROV.ProvTransportProvider.DBProvisioningTransport.The column key_id does not exist in the target" does not correspond to a known Response Code. Using "UNKNOWN".
Please help
Thanks in advance
Sahana

Make sure that your DataSource is in running state when you create the connection pool in DBAdapter. You may restart the server or recreate the connection pool in DBAdapter.
Regards,
Anuj

How to find out that particular structure is used in which tables

Hello Friends,
Most of the times through techinal information we come to know the table name for a particular field.And in se16 when i give that table name than system says its structure and not the table.So in se11 when i give that structure name in database table field, its shows all the field in that structure, but not the data stored in that field.
So my question is how to find out that particular structure is used in which tables,so that i can view data stored in that structure?
Thanking you guys in advance.
Regards,
Jitendra

Dear,
When you click on the technical information it will give the structure name and field, double click on the structure and it will take you the display structure screen, there you will have the where-used List icon (Ctrl + Shift + F3) at the top , click on that and it will show the options, select Database tables and execute, it will give the tables related to the structure, you can explore the list of tables and find where your required field is stored in them.
Thanks & Regards,
Vijaya Bhaskar A

How to populate field catalogue fields in ALV using dynamic internal table

Hi All,
Please let me know how to populate field catalogue fields in ALV using dynamic internal table.
I have created <dyn_table> using code below.
CALL METHOD cl_alv_table_create=>create_dynamic_table
                 EXPORTING
                   it_fieldcatalog = g_t_ifc
                    it_fieldcatalog = g_t_fieldcat
                 IMPORTING
                    ep_table        = dy_table.
ASSIGN dy_table->* TO <dyn_table>.
Create dynamic work area and assign to FS
CREATE DATA dy_line LIKE LINE OF <dyn_table>.
ASSIGN dy_line->* TO <dyn_wa>.
Now this <dyn_table> has fields like idoc no.,creation date ,
segment field 1, segment field 2 etc..Now idoc no.,creation date are static fields from table EDIDC. And segment field 1, segment field 2 etc are dynamic fields from table EDSAPPL.
In my ALV report I am getting the final layout properly but I am unable to move values to corresponding fields in the final layout shown.Please let me know how to populate these fields from different tables.
I tried this way but its not working.
SORT g_t_edid4 BY docnum.
LOOP AT g_t_edidc INTO g_r_edidc.
    READ TABLE g_t_edid4 into g_r_edid4
                     WITH KEY docnum = g_r_edidc-docnum
                                    BINARY SEARCH.
    IF sy-subrc = 0.
      <dyn_wa> = g_r_edid4-sdata.
     MOVE-CORRESPONDING g_r_edid4 to <dyn_wa>.
   CLEAR g_r_edid4.
    ENDIF.
MOVE-CORRESPONDING g_r_edidc to <dyn_wa>.
APPEND <dyn_wa> TO <dyn_table>.

You have to assign each field to field symbol and then assign the value to that field symbol and asssign that field symbol to workarea field symbol.
LOOP AT g_t_edidc INTO g_r_edidc.
READ TABLE g_t_edid4 into g_r_edid4
WITH KEY docnum = g_r_edidc-docnum
BINARY SEARCH.
IF sy-subrc = 0.
ASSIGN COMPONENT 'SDATA' OF STRUCTURE <DYN_WA> TO <DYN_FLD>.
<DYN_FLD> = g_r_edid4-sdata.
" <dyn_wa> = g_r_edid4-sdata.
" Assign each fields like this.
" MOVE-CORRESPONDING g_r_edid4 to <dyn_wa>.
CLEAR g_r_edid4.
ENDIF.
" MOVE-CORRESPONDING g_r_edidc to <dyn_wa>.
APPEND <dyn_wa> TO <dyn_table>.
Regards,
Naimesh Patel

Use of internal table with hearerline in ABAP OO

Hi,
I have a very basic question regarding the use of Internal table with headerline in ABAP OO.
I consider the concept of Internal table with header as one of the most features of ABAP, which is not there in any of the other porgramming languages.
I accept that OO's concept is one of the most powerful and a very good concept. We should also implement OO's concept in ABAP.
But my concern is why in the process of moving to OO's the concept of Internal table with headerline is no more used.
Can any one tell me the main reason for this. Is there any technical reason for this. By this i mean anything to do with memory or effeciency.
Thanx,
Srinivas

Hi Srinivas,
here is something more which i found about the same
follow this link
https://sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5ac31178-0701-0010-469a-b4d7fa2721ca
and search for header line.
it says:
Tables with header lines not allowed
Only tables without header lines can be declared in ABAP Objects.
Error message in ABAP Objects if the following syntax is used:
DATA itab TYPE LIKE TABLE OF ... WITH HEADER LINE.
Correct syntax:
DATA: itab TYPE LIKE TABLE OF ... ,
wa LIKE LINE OF itab.
Reason:
It depends on the statement whether the body or header line of a table is accessed. The table name should identify the table uniquely. Programs are easier to read. Tables with header lines do not improve performance.
i hope this will help you.
regards,
Kinshuk
PS mark helpful answers

Use of RRKMULTIPROVHINT table in multiprovide

Similar Messages

Maybe you are looking for