Use of RTMFP p2p services in FMS...

Hello:
I am developing a serious version 2 of a video phone application where I want to use the low-latency RTMFP protocol. I currently use Influxis which supports my client/server RTMP version of my video phone app.
I have been experimenting with Cirrus for the low latency P2P RTMFP protocol. When it works, it is excellent....on par with Skype. However, sometimes it does not work. This morning, the audio carried the first syllable of a sentence I uttered and
also one or 2 frames of video and then just stopped.
I want to be able to find out what the problem was.....
I've read that I can build a failover to use RTMP protocol for the existing client/server TCP functionality that I currently have, but I really want to find out what kinds of issues that occur....perhaps monitoring for why the RTMFP protocol is not working at
any given moment.
I was using 2 computers on my own internal LAN to facilitate the communication....I know I did this before without such an issue, but perhaps you can't do such UDP transmissions from one client computer on your internal network to another without issues
occurring from time to time?
Are there any good monitors that could give me insight into what could be going wrong?
How can I build a failover if I don't know what to check before I tell the code to failover?
Thanks,
Dan

Hi RS is not required to be installed into db server or app server. It can be even an external RS server.
You are right if you will try to install RS in both app server you need Enterprise Edition because is required by Microsoft for RS web farm.
If you will install RS into database server then you don't need other license for SQL but if you will use SQL Server 2005 you have to install IIS into database server.
For many companies this broke some security policies and for this reason you have to install RS into appserver.
If you will use SQL Server 2008 then IIS is not required anymore and this is another plus in favor of SQL 2008.
Also SAP recomendations is to use SQl Server 2008 for SAP BPC 7.0 SP3 or later becaiuse the performances are better.
RS is used for:
Admin reportts. Audit Reports Journal Reports.
But without RS working you can have issue also with some Admin components not really just with reports.
Regards
Sorin Radulescu

Similar Messages

Using an external web service and local element declarations

I am attempting to use (call) an external web service from workshop
8.1. It seems that if the web service's schema contains local element
declarations with the same name then workshop will generate incorrect
JCX code because it doesn't scope the generated classes.
I think the following simple example will do a better job explaining
than that last paragraph ;). In the following WSDL, the element
"testLocalDec" is used inside two different element types. In XML
Schema this is not a problem because each one is "scoped" by the
element types its included in. However, the generated JCX (listed
second) simply contains the testLocalDec structure twice which causes
problems in Java.
Is there some workaround for this? Note that making this element
declaration in the WSDL will not work because they are different
structures (with different names).
Also see my next email around using XMLBeans with external services
(since that could be a workaround if I knew how to do it).
thanks,
dave
*** sample WSDL ***
<?xml version="1.0" encoding="UTF-8"?>
<wsdl:definitions xmlns:tns="urn:tutorial/hello"
targetNamespace="urn:tutorial/hello"
xmlns:s="http://www.w3.org/2001/XMLSchema"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:apachesoap="http://xml.apache.org/xml-soap"
xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"
xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
xmlns:wsdlsoap="http://schemas.xmlsoap.org/wsdl/soap/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<wsdl:types>
<s:schema targetNamespace="urn:tutorial/hello">
     <s:element name="sayHelloResponse" >
<s:complexType>
<s:sequence>
<s:element name="sayHelloReturn" type="s:string" />
<s:element name="testLocalDec" >
<s:complexType />
</s:element>
</s:sequence>
</s:complexType>
</s:element>
     <s:element name="sayHello" >
<s:complexType>
<s:sequence>
<s:element name="caller" type="s:string" />
<s:element name="testLocalDec" >
<s:complexType >
<s:sequence>
<s:element name="different" type="s:string" />
</s:sequence>
</s:complexType>
</s:element>
</s:sequence>
</s:complexType>
</s:element>
</s:schema>
</wsdl:types>
<wsdl:message name="sayHelloRequestMsg">
<wsdl:part name="message" element="tns:sayHello"/>
</wsdl:message>
<wsdl:message name="sayHelloResponseMsg">
<wsdl:part name="sayHelloReturn" element="tns:sayHelloResponse"/>
</wsdl:message>
<wsdl:portType name="HelloWorld">
<wsdl:operation name="sayHello" >
<wsdl:input message="tns:sayHelloRequestMsg" />
<wsdl:output message="tns:sayHelloResponseMsg" />
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="HelloWorldServiceSoapBinding"
type="tns:HelloWorld">
<wsdlsoap:binding style="document"
transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="sayHello">
<wsdlsoap:operation soapAction=""/>
<wsdl:input name="sayHelloRequestMsg">
<wsdlsoap:body use="literal"/>
</wsdl:input>
<wsdl:output name="sayHelloResponseMsg">
<wsdlsoap:body use="literal"/>
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="HelloWorldService">
<wsdl:port binding="tns:HelloWorldServiceSoapBinding"
name="HelloWorldService">
<wsdlsoap:address
location="http://localhost:18080/tutorial/HelloWorldService"/>
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
*** generated JCX ***
package helloTest;
* @jc:location
http-url="http://localhost:18080/tutorial/HelloWorldService"
* @jc:wsdl file="#HelloWorldServiceWsdl"
* @editor-info:link source="HelloWorldService.wsdl" autogen="true"
public interface HelloWorldServiceControl extends
com.bea.control.ControlExtension, com.bea.control.ServiceControl
public static class testLocalDec
implements java.io.Serializable
public static class sayHelloResponse
implements java.io.Serializable
public java.lang.String sayHelloReturn;
public testLocalDec testLocalDec;
public static class testLocalDec
implements java.io.Serializable
public java.lang.String different;
* @jc:protocol form-post="false" form-get="false"
public sayHelloResponse sayHello (java.lang.String caller,
testLocalDec testLocalDec);
static final long serialVersionUID = 1L;
/** @common:define name="HelloWorldServiceWsdl" value::
<?xml version="1.0" encoding="UTF-8"?>
<wsdl:definitions xmlns:tns="urn:tutorial/hello"
targetNamespace="urn:tutorial/hello"
xmlns:s="http://www.w3.org/2001/XMLSchema"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:apachesoap="http://xml.apache.org/xml-soap"
xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"
xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
xmlns:wsdlsoap="http://schemas.xmlsoap.org/wsdl/soap/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<wsdl:types>
<s:schema targetNamespace="urn:tutorial/hello">
     <s:element name="sayHelloResponse" >
<s:complexType>
<s:sequence>
<s:element name="sayHelloReturn" type="s:string" />
<s:element name="testLocalDec" >
<s:complexType />
</s:element>
</s:sequence>
</s:complexType>
</s:element>
     <s:element name="sayHello" >
<s:complexType>
<s:sequence>
<s:element name="caller" type="s:string" />
<s:element name="testLocalDec" >
<s:complexType >
<s:sequence>
<s:element name="different" type="s:string" />
</s:sequence>
</s:complexType>
</s:element>
</s:sequence>
</s:complexType>
</s:element>
</s:schema>
</wsdl:types>
<wsdl:message name="sayHelloRequestMsg">
<wsdl:part name="message" element="tns:sayHello"/>
</wsdl:message>
<wsdl:message name="sayHelloResponseMsg">
<wsdl:part name="sayHelloReturn"
element="tns:sayHelloResponse"/>
</wsdl:message>
<wsdl:portType name="HelloWorld">
<wsdl:operation name="sayHello" >
<wsdl:input message="tns:sayHelloRequestMsg" />
<wsdl:output message="tns:sayHelloResponseMsg" />
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="HelloWorldServiceSoapBinding"
type="tns:HelloWorld">
<wsdlsoap:binding style="document"
transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="sayHello">
<wsdlsoap:operation soapAction=""/>
<wsdl:input name="sayHelloRequestMsg">
<wsdlsoap:body use="literal"/>
</wsdl:input>
<wsdl:output name="sayHelloResponseMsg">
<wsdlsoap:body use="literal"/>
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="HelloWorldService">
<wsdl:port binding="tns:HelloWorldServiceSoapBinding"
name="HelloWorldService">
<wsdlsoap:address
location="http://localhost:18080/tutorial/HelloWorldService"/>
</wsdl:port>
</wsdl:service>
</wsdl:definitions>

Hi David,
The folks in the workshop newgroup may have a suggestion, if you could
try your post there:
http://newsgroups.bea.com/cgi-bin/dnewsweb?cmd=xover&group=weblogic.developer.interest.workshop
Thanks,
Bruce
David Rees wrote:
>
I am attempting to use (call) an external web service from workshop
8.1. It seems that if the web service's schema contains local element
declarations with the same name then workshop will generate incorrect
JCX code because it doesn't scope the generated classes.
I think the following simple example will do a better job explaining
than that last paragraph ;). In the following WSDL, the element
"testLocalDec" is used inside two different element types. In XML
Schema this is not a problem because each one is "scoped" by the
element types its included in. However, the generated JCX (listed
second) simply contains the testLocalDec structure twice which causes
problems in Java.
Is there some workaround for this? Note that making this element
declaration in the WSDL will not work because they are different
structures (with different names).
Also see my next email around using XMLBeans with external services
(since that could be a workaround if I knew how to do it).
thanks,
dave
*** sample WSDL ***
<?xml version="1.0" encoding="UTF-8"?>
<wsdl:definitions xmlns:tns="urn:tutorial/hello"
targetNamespace="urn:tutorial/hello"
xmlns:s="http://www.w3.org/2001/XMLSchema"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:apachesoap="http://xml.apache.org/xml-soap"
xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"
xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
xmlns:wsdlsoap="http://schemas.xmlsoap.org/wsdl/soap/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<wsdl:types>
<s:schema targetNamespace="urn:tutorial/hello">
<s:element name="sayHelloResponse" >
<s:complexType>
<s:sequence>
<s:element name="sayHelloReturn" type="s:string" />
<s:element name="testLocalDec" >
<s:complexType />
</s:element>
</s:sequence>
</s:complexType>
</s:element>
<s:element name="sayHello" >
<s:complexType>
<s:sequence>
<s:element name="caller" type="s:string" />
<s:element name="testLocalDec" >
<s:complexType >
<s:sequence>
<s:element name="different" type="s:string" />
</s:sequence>
</s:complexType>
</s:element>
</s:sequence>
</s:complexType>
</s:element>
</s:schema>
</wsdl:types>
<wsdl:message name="sayHelloRequestMsg">
<wsdl:part name="message" element="tns:sayHello"/>
</wsdl:message>
<wsdl:message name="sayHelloResponseMsg">
<wsdl:part name="sayHelloReturn" element="tns:sayHelloResponse"/>
</wsdl:message>
<wsdl:portType name="HelloWorld">
<wsdl:operation name="sayHello" >
<wsdl:input message="tns:sayHelloRequestMsg" />
<wsdl:output message="tns:sayHelloResponseMsg" />
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="HelloWorldServiceSoapBinding"
type="tns:HelloWorld">
<wsdlsoap:binding style="document"
transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="sayHello">
<wsdlsoap:operation soapAction=""/>
<wsdl:input name="sayHelloRequestMsg">
<wsdlsoap:body use="literal"/>
</wsdl:input>
<wsdl:output name="sayHelloResponseMsg">
<wsdlsoap:body use="literal"/>
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="HelloWorldService">
<wsdl:port binding="tns:HelloWorldServiceSoapBinding"
name="HelloWorldService">
<wsdlsoap:address
location="http://localhost:18080/tutorial/HelloWorldService"/>
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
*** generated JCX ***
package helloTest;
* @jc:location
http-url="http://localhost:18080/tutorial/HelloWorldService"
* @jc:wsdl file="#HelloWorldServiceWsdl"
* @editor-info:link source="HelloWorldService.wsdl" autogen="true"
public interface HelloWorldServiceControl extends
com.bea.control.ControlExtension, com.bea.control.ServiceControl
public static class testLocalDec
implements java.io.Serializable
public static class sayHelloResponse
implements java.io.Serializable
public java.lang.String sayHelloReturn;
public testLocalDec testLocalDec;
public static class testLocalDec
implements java.io.Serializable
public java.lang.String different;
* @jc:protocol form-post="false" form-get="false"
public sayHelloResponse sayHello (java.lang.String caller,
testLocalDec testLocalDec);
static final long serialVersionUID = 1L;
/** @common:define name="HelloWorldServiceWsdl" value::
<?xml version="1.0" encoding="UTF-8"?>
<wsdl:definitions xmlns:tns="urn:tutorial/hello"
targetNamespace="urn:tutorial/hello"
xmlns:s="http://www.w3.org/2001/XMLSchema"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:apachesoap="http://xml.apache.org/xml-soap"
xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"
xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
xmlns:wsdlsoap="http://schemas.xmlsoap.org/wsdl/soap/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<wsdl:types>
<s:schema targetNamespace="urn:tutorial/hello">
<s:element name="sayHelloResponse" >
<s:complexType>
<s:sequence>
<s:element name="sayHelloReturn" type="s:string" />
<s:element name="testLocalDec" >
<s:complexType />
</s:element>
</s:sequence>
</s:complexType>
</s:element>
<s:element name="sayHello" >
<s:complexType>
<s:sequence>
<s:element name="caller" type="s:string" />
<s:element name="testLocalDec" >
<s:complexType >
<s:sequence>
<s:element name="different" type="s:string" />
</s:sequence>
</s:complexType>
</s:element>
</s:sequence>
</s:complexType>
</s:element>
</s:schema>
</wsdl:types>
<wsdl:message name="sayHelloRequestMsg">
<wsdl:part name="message" element="tns:sayHello"/>
</wsdl:message>
<wsdl:message name="sayHelloResponseMsg">
<wsdl:part name="sayHelloReturn"
element="tns:sayHelloResponse"/>
</wsdl:message>
<wsdl:portType name="HelloWorld">
<wsdl:operation name="sayHello" >
<wsdl:input message="tns:sayHelloRequestMsg" />
<wsdl:output message="tns:sayHelloResponseMsg" />
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="HelloWorldServiceSoapBinding"
type="tns:HelloWorld">
<wsdlsoap:binding style="document"
transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="sayHello">
<wsdlsoap:operation soapAction=""/>
<wsdl:input name="sayHelloRequestMsg">
<wsdlsoap:body use="literal"/>
</wsdl:input>
<wsdl:output name="sayHelloResponseMsg">
<wsdlsoap:body use="literal"/>
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="HelloWorldService">
<wsdl:port binding="tns:HelloWorldServiceSoapBinding"
name="HelloWorldService">
<wsdlsoap:address
location="http://localhost:18080/tutorial/HelloWorldService"/>
</wsdl:port>
</wsdl:service>
</wsdl:definitions>

Using WebCenter Spaces Web Service API through JDeveloper's Data Control

Hi,
I'm trying to access WebCenter Spaces Web Service API (located at http://host:port/webcenter/SpacesWebService)
using JDeveloper's Web Center Data Control.
I created a data control in my portal project using JDeveloper's Web Service Data Control wizard.
I also created and configured key stores (jps-config.xml) at both sides (spaces server and my portal client).
How I created a data control:
* First I entered the name and the URL (http://host:port/webcenter/SpacesWebService?WSDL)
* Then I entered HTTP basic authentication details (user name and password)
* After that I drag-and-drop the getGroupSpaces() method from the data control to a .jspx page as a ADF read-only table.
* Then ran my portal project and navigated to this .jspx page and it worked. List of group spaces appeared well on that page.
The problem is that I got only public group spaces and group spaces created by the user I entered on HTTP basic authentication details.
I makes no sense to enter some static user details in a web service client (or a data control).
So the question is; can I use identity propagation to get only group spaces created by the same user which I logged in my portal?
Edited by: 832886 on Feb 18, 2011 3:09 AM

Hi,
You generally get NameError when you are executing the createCred/updateCred from a incorrect location. Are you using the wlst from oracle_common\common\bin?
Also, In your steps I don't see what you did to populate the walllet at JDeveloper end after your updateCred failed. This is a required step. Use the wlst from the location emntioned above and you should be able to proceed.
Thanks,
Vishal

Use two different printer services in one web template?

Hi!
Is it possible to use two different help services for printing in the same web template (for the same table item)?
Print1:
<param name="HELP_SERVICE" value="HELP_SERVICE_PRINT"/>
<param name="HELP_SERVICE_CLASS" value="ZCL_RSR_XLS_HELP_WINDOW_PRINT"/>
Print 2:
<param name="HELP_SERVICE" value="ZPRINTING"/>
<param name="HELP_SERVICE_CLASS" value="ZBW_PRINT_HELP_SERVICE"/>
I was thinking that you maybe could change the param name values for the "Help_service" and the "help_service_class" at runtime using the properties for the table item, so that you could choose which one to use, but I havne't been able to do that so far.
Does anyone have an idea?

This is not a problem. Just put the print service for the print to excel on an object other than the table web item. As long as these print services exist on any web item, you should be able to invoke them. I've tested this with putting the "Print with Excel" service on the Navigation Block Web Item and the other print service on the table web item. Hope that helps!
Prakash

How can I using tpcall from one service to another service in the same server

When I using tpforward between two services in one server, it's working ok. However,
when I using tpcall from one service to another service, it's failed?
anybody can tell me why?
thanks
george

"george" <[email protected]> wrote:
>
When I using tpforward between two services in one server, it's working
ok. However,
when I using tpcall from one service to another service, it's failed?
anybody can tell me why?Basically, tpcall:ing another service in the same server is a no-no, unless you
a) are running a multi-threaded server (requires TUXEDO 7 or newer + compilation
options) or
b) use tpacall() instead of tpcall() and specify the flag TPNOREPLY. This is probably
not what you want to accomplish, though.
The reason is that TUXEDO servers by default (and always in versions before 7)
are single-threaded. If service A and B both reside in server X, server X will
be busy taking care of the call to A. If A makes a call to B, the call will be
put on the queue to X, but X will not look at the queue until it is done with
A, which won't happen until B returns... deadlock!
You can play tricks with starting multiple instances of X, but in the end you
will always face a risk (something lika a race-condition) for a dead-lock.
Solution: Move service B to another server (usually quite easy) OR switch to multi-threading,
if that's possible. Just make sure all code your service calls is MT-safe as well...
thanks
georgeHope this helps you,
/Per

How do I set the "reply to" field in the iPad 2 Mail app? I use an email forwarding service (not an actual email account) that I would like people to reply to.

How do I set the "reply to" field in the iPad 2 Mail app? I use an email forwarding service (not an actual email account) that I would like people to reply to, so setting up an account with the correct reply-to address doesn't work because there's no associated outgoing mail server. I had this working under iOS4 but it seems to have disappeared when I upgraded to iOS5.

Welcome to the forum, NicoleYM. I don't think the Touch Mail has as many options as the Mac Mail app. However, you could set a standard signature. Go to Settings > Mail, Contacts, Calendars > Signature. There you can type a reply address and hope people see it.
Alternatively, you can go to your GMail account in your web browser and click on Settings > Forwarding and POP/IMAP. There you will have an option to forward all emails (or only some, if you set up a filter) to your other address.
Good luck!

OSB example calling multiple business services using a single proxy service???

Hi,
I have three business services created using http urls i.e.
1. LoginBS
2. GetListBS
3. LogoutBS
My requirement is to get a list of names from GetListBS using a single proxy service and to call GetListBS I have to first call LoginBS then GetListBS i.e. after authentication and then finally logout.
Kindly help with a detailed example for this and I am new to OSB.
Thanks,
Vik

Hi Eric,
Thanks for the response. We figured that it is possible to call multiple services with Split Join. However, we ran into the issue you described. We had a blocking call and had to wait until each of the services returned a response.
However, we needed a Async model for our design and felt that this might not be a right fit.
We are now looking at implementing the publish option with QoS configured as this fits our usecase better. Thanks for the help again.
Rudraksh

I have created a family recipe book in iBooks - can I print it using iPhoto's print service?

I have created a family recipe book in iBooks - can I print it using iPhoto's print service? I don't want to print it on our home printer - I want to print multiple copies for family members through the Apple iPhoto book printing service. Can anyone help me please?

There is no Apple print service for iBooks, and iPhoto can also only print photo books created in iPhoto.
Print your iBook to pdf. Then you have several option:
Save the pdf to a thumbsdrive/stick and take it to the nearest print shop close to your home.
Search online for "self publishing" services available in your country.
Recreate your book as an iPhoto Book. This will be a lot of work, since iPhoto's templates are more suitable for Picture books than books with lots of formatted text. To speed things up, you could use "Preview" to export the pages of your book as jpegs (high quality, at least 300 dpi) and add themas full-page photos to a new PhotoBook. This can be sent to apple for printing.
But the first two options would be much less trouble and probably be less expensive.
-- Léonie

Create Lead with Oracle BPEL process using Siebel CRMOD web service

I'm trying to create a lead in the siebel OD (hosted) with a oracle BPEL process and using the siebel web service (2.0). In my bpel process I've been able to
1. Login to OD and get a session id
2. create the partner link using Siebel OD (version 2.0) wsdl for Lead
3. Assign the session id to the partner link
4. Assign the inputs (lastname, firstname, leadowner, viewMode=Personal, lovLanguageMode=LDC) to lead
5. Call the leadInsert operation on the partner link
However, when I deploy and execute the bpel process it breaks after calling the leadInsert with the following error message:
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
<remoteFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="code"><code>Server</code>
</part><part name="summary"><summary>The record with search specification '' in business component 'Lead' (integration component 'Lead') has been deleted by another user since it was retrieved.(SBL-EAI-04289)</summary>
</part><part name="detail"><detail><detail>
<siebelf:siebdetail xmlns:siebelf="http://www.siebel.com/ws/fault" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">
<siebelf:logfilename xmlns:siebelf="http://www.siebel.com/ws/fault" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">OnDemandServicesObjMgr_enu_138636.log</siebelf:logfilename>
<siebelf:errorstack xmlns:siebelf="http://www.siebel.com/ws/fault" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">
<siebelf:error xmlns:siebelf="http://www.siebel.com/ws/fault" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">
<siebelf:errorcode xmlns:siebelf="http://www.siebel.com/ws/fault" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">(SBL-DAT-00494)</siebelf:errorcode>
<siebelf:errorsymbol xmlns:siebelf="http://www.siebel.com/ws/fault" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"/>
<siebelf:errormsg xmlns:siebelf="http://www.siebel.com/ws/fault" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">The record with search specification '' in business component 'Lead' (integration component 'Lead') has been deleted by another user since it was retrieved.(SBL-EAI-04289)</siebelf:errormsg>
</siebelf:error>
</siebelf:errorstack>
</siebelf:siebdetail>
</detail>
</detail>
</part></remoteFault>
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Any feedback as to what I'm doing worng woull be greatly appreciated.
Thanks,
--manoj

Hi,
We are also using BPEL to send data out to SIEBEL CRMOD.
I've created a proxy that deals with authentication and session management.
All you have to do is to deploy the proxy as a war file and refrence it as the end-point of your partner link.
Code is here:
http://another-soa-blog.blogspot.com/2010/02/oracle-siebel-on-demand-session-and.html
Regards,
Fred.

Do I need to use a virus protection service such as McAfee with my Macbook Pro?

I would like to know if I need to use a virus protection service such as McAfee with my Macbook Pro. I understand Macs do not get viruses - is this correct?

McAfee has caused numerous problems for Mac users. This is the results of a forum search I just did.
https://discussions.apple.com/community/mac_os/search.jspa?peopleEnabled=true&us erID=&containerType=&container=&spotlight=true&q=McAfee
Macs are not vulnerable to a virus but they are malware.
http://www.reedcorner.net/guides/macvirus/
How to avoid or remove Mac Defender malware

Connect to SharePoint web service using the XML / Web Service connector

Hi experts,
I am currently trying to display my SharePoint list in Crystal Report. Therefore my plan is to use a SharePoint web service to get the data and paste them to the Crystal Report.
Is it possible to use the "XML and Web services" connector of the Crystal Reports database expert?
When I enter the web service URL, for instance:
https://[url]/_vti_bin/lists.asmx?wsdl
and click next... I have to enter the web service credentials.
On the next page I have to enter Service, Port and Method.
Do I have to enter the service URL again here?
What If, there is no port? Can I leave that field empty?
I know the methods, but where can I add the mandatory parameters?
Thanks for any helps and comments!
Sebastian

Hi Ananth,
thank you, but this document does not help at all.
We are using Crystal Reports 2008 SP2.
We want to use the Web Service Connector.
What I need is more informationen about the Web service connect. For example - the connection in Microsoft InfoPath is much easier - there I don't have to enter a port and can choose the methods from a list.
Is it possible to use the Crystal web service connector for MS SharePoint Webservices?
Or must I use the Crystal SDK to carry out a connection?
Best regards,
Sebastian

Getting Server Error Code: -2147024891 when using Biztalk Windows SharePoint Services Adapter to upload a document

We are currently running
1. BizTalk Server 2013 R2
2. SharePoint 2013
both in a Windows 2012 Server environment, in Azure.   The BizTalk and SharePoint are running on separate machines.
I am using the Windows SharePoint Adapter to upload a Tif file to a SharePoint document library. However, when the host instance is running under my team member's userid, I get the following error in the eventlog:
The adapter failed to transmit message going to send port "SendOwnershipToSharePoint" with URL "wss://bp1amsapt218:34392/sites/BiztalkSc/Lists/Ownership". It will be retransmitted after the retry interval specified for this Send Port.
Details:"[Microsoft.SharePoint.Client.ServerUnauthorizedAccessException] Access denied. You do not have permission to perform this action or access this resource. Server Error Code: -2147024891Trace:    at Microsoft.SharePoint.Client.ClientRequest.ProcessResponseStream(Stream
responseStream)
   at Microsoft.SharePoint.Client.ClientRequest.ProcessResponse()
   at Microsoft.SharePoint.Client.ClientRequest.ExecuteQueryToServer(ChunkStringBuilder sb)
   at Microsoft.SharePoint.Client.ClientRequest.ExecuteQuery()
   at Microsoft.SharePoint.Client.ClientRuntimeContext.ExecuteQuery()
   at Microsoft.SharePoint.Client.ClientContext.ExecuteQuery()
   at Microsoft.SharePoint.Client.Web.WebUrlFromPageUrlDirect(ClientContext context, Uri pageFullUrl)
   at Microsoft.BizTalk.KwTpm.WssAdapter.ClientOmAccessor.RequestInfo..ctor(String siteUrl, String sharePointOnlineUsername, String sharePointOnlinePassword)
   at Microsoft.BizTalk.KwTpm.WssAdapter.ClientOmAccessor.ListsAccessor..ctor(String siteUrl, String sharePointOnlineUsername, String sharePointOnlinePassword)
   at Microsoft.BizTalk.KwTpm.WssAdapter.ClientOmAccessor.ListsAccessor.TryOpenWebSite(String siteUrl, String sharePointOnlineUsername, String sharePointOnlinePassword, Exception& lastError)
This error was triggered by the Windows SharePoint Services receive location or send port with URI wss://bp1amsapt218:34392/sites/BiztalkSc/Lists/Ownership.
Windows SharePoint Services adapter event ID: 12310".
This userid has already been added to the following groups on the BizTalk Server:
Local Administrators Group
BizTalk Server Administrators
SSO Administrators
BizTalk Isolated Host Users
BizTalk Application Users
I have also made sure the userid has full control access to the SharePoint site and the document library within the site.   I have confirmed that the user with this userid is able to access the SharePoint site and can upload documents to the
document library, manually.   However, when the host instance is running under this userid, I am not able to upload documents to the SharePoint document library.
The Windows SharePoint Services Adapter is configured with the following values:
Adapter Web Service Port:   34392
Timeout:   100000
Use Client OM: Yes
Destination Folder URL: Lists/Ownership
FileName: test.tif
Overwrite: Yes
SharePoint Site URL:
http://bp1amsapt218:34392/sites/BiztalkSc/
Microsoft Office Integration: No
Do you know what the cause for this error is?   We urgently need a resolution for this?

If you create an XML document and upload it to the Windows SharePoint Services Web site. The Windows SharePoint Services adapter will take that message, archive it in the Archive document library, and then send it to the Destination document library. This
procedure demonstrates how a document flows from a Sharepoint web site, through BizTalk Server, and to a Sharepoint Services Web site using the Windows Sharepoint Services adapter.
This MSDN library article shows the procedure, please check whether it will be helpful to troubleshoot.
Create a working directory
Create an XML file
Upload the XML file
See: https://msdn.microsoft.com/en-us/library/aa560513.aspx

Do we require to install microsoft excel in sharepoint 2013 server?. if require to use sharepoint 2013 excel services.

Do we require to install microsoft excel in sharepoint 2013 server?. if require to use sharepoint 2013 excel services.
In our organisation, development team is asking to install office 2013 in SharePoint 2013 server to use different services, where as architecture team not allowing for the same. I need to provide proper justification for installing office 2013 in SharePoint
2013 server. Please provide me the correct solution for the same.

No, you do not need to install Office on the SharePoint server to utilize the Excel Services. Office should not be installed on the SharePoint server.
Do they need Office Web Apps? Are they looking to have the capability to edit documents in the browser maybe? Or have document preview on search? Office Web Apps would be required for this, but this is a different product than Office.
Brandon Atkinson
Blog: http://sharepointbrandon.com

Use-Case for Business Services (Service Without Party) in SAP XI

Hi,
I have a synchronous scenario where I am calling a web Service from SAP R/3 via SAP XI. I have designed the Integration Scenario in the Integration Repository, where I created an A2A role for the R/3 System and a B2B Role for the Web Service. For the Web Service Party in the Integration Directory I use a Business Service unterneath 'Service without Party' as the party for the Web Service is unknown.
I realized that I cannot assign the Business Service to the defined Web Service Role when I want to use the Integrationscenario-Configurator. This only works when I ceate a Party and create the Business Service underneath this Party.
I understand that this makes sense when I am having a B2B communication like in this case although I don't have a real external Party for the Web Service.
But I don't understand for which cases I would create a Business Service underneath the 'Service without Party' as internal Systems are known and can be set-up as Business Systems in the SLD.
Does anybody have such a case where I use an 'Internal' Business Service? And is there any way that I can use such a Business Service in the Business Integrationscenario-Configurator?
Thanks in advance.
Alex

Hi,
for creatting a communication channel you will have to have either the Business system, Business service.
For file systems which are generally just servers come under Business service. This is one of the place where you use Business service.
Regards
Vijaya
Message was edited by: vijaya kumari

Use Microsoft Online Directory Services as a user authentication provider for our own SharePoint farm?

Hi,
I've managed to configure my farm so that Microsoft Online Directory Services (Office 365 etc.) can be used for STS authentication, but what I'm actually trying to do is allow user authentication - that is, I'm hoping to be able to use the user's
O365 credentials to authenticate them in my own farm so they can view certain parts of it. If I need to write my own login form or authentication provider or whatever that's fine, as long as the user doesn't need to enter anything when they access my farm
(provided they already have cached O365 credentials in their browser session).
FWIW I actually need to be able to support the possibility that users are coming from multiple O365 tenancies, whereby each site collection will be configured to allow users from a different O365 tenancy (more or less).
If it's not possible to do with my own development farm on a PC, it is possible if the farm is hosted in Azure?
Thanks
Dylan

Hi Dylan,
According to your description, my understanding is that you want to use Microsoft Online Directory Services as a user authentication provider for your SharePoint farm.
For your demand, you can configure a hybrid topology for your SharePoint farm:
http://technet.microsoft.com/en-us/library/jj838715(v=office.15).aspx
http://technet.microsoft.com/en-us/library/dn197168(v=office.15).aspx
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
contact [email protected]
Eric Tao
TechNet Community Support

Use of RTMFP p2p services in FMS...

Similar Messages

Maybe you are looking for