Use old domain controller AD user profile with new domain (profile changed)

Dear All,
I have built Win Server 2012 for Domain migration from Windows Server 2003 to Windows Server 2012. I have tested all thing on VMware including user creation and tested Domain join using power shell for Win 7 and .VBs batch file for Win XP computers all thing
are working fine.
Let 1st I introduce my current environment. I have existing Win Server 2003 domain controller (abc.com) with 130 client computers and 200 users I am going to plan migrate my current environment to Win server 2012 Domain (xyz.com) Keep in mind that Domain
name is changed but Domain Controller (Server) names are same i.e MY-PDC . I have tested domain join on multiple computers using existing clone of client computers and create all existing users using .csv file and power shell with required
credentials and OU.I am facing the user profile issue when I join domain and login with existing user which was previously the user of same computer the required profile does not login and computer creates new user profile in Document and Settings section
of Win XP.
I need your expert opinions because copy old profile data and create new outlook profile for each user is a big headache for any one. Hope you people can understand and help me in this issue.
Please provide best answer and result on priority I will be thankful to all of you.
Regards,
Arsalan

Hi Arsalan,
Please check if USMT can help you to achieve this target.
User State Migration Tool 4.0 User's
Guide
Meanwhile, please also refer to following articles and check if can help you.
How
to Migrate Windows User Profile to New Account
Keeping user old domain profile
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft
does not guarantee the accuracy of this information.
If anything I misunderstand or any update, please don’t hesitate to let us know.
Hope this helps.
Best regards,
Justin Gu

Similar Messages

Hey,i forgot my login password,so i changed the password by using terminal command(reset password).now i have new user name with new password,but i can't find my data which i have saved on mac.please help me out in this matter.

hey,i forgot my login password,so i changed the password by using terminal command(reset password).now i have new user name with new password,
but i can't find my data which i have saved on mac.the storage is showing data used and free space on the disk
please help me out in this matter.

How did you change your user name?
resetpassword wouldn't have done it. If you managed to create a new user, then your data is still in the old account.

Is it ok to leave my old photos in Aperature and start with new photos in Lightroom? MacPro with 2 x 2.26 Ghz Quad-Core Intel Xeon processor, 6 GB memory, 1 TB harddrive.

Is it ok to leave my old photos in Aperature and start with new photos in Lightroom? MacPro with 2 x 2.26 Ghz Quad-Core Intel Xeon processor, 6 GB memory, 1 TB harddrive?
Or should I transfer them to Lightroom?

That's really a personal preference. Support for Aperture is coming to an
end and you may find yourself unable to get to theses photos in the future
in the case of a HDD crash if you can't get the software to reinstall.
Faced with that prospect, I would probably put it on my list of things to
do when I am feeling really bored and looking for something to amuse myself
with. You can export your Aperture photos in their original format to a
folder on your desktop and then import them into Lightroom. Use the copy
option on the import to save the photos in a new folder within your
Lightroom catalog.

Office 2011 will not open in OS 10.9 with main user -- works with new user. Suggestions??

Office 2011 will not open in Mavericks with main user -- works with new user. Suggestions??
I've tried removing Office 2011 completely and re-installing to no avail.

Unfortunately, my experience with Office is that somethoping will get corrupted in your account that prevents it from running. I have never figured out what exactly needs to be removed to make it work again.

Would use iphone?if apple replaces ios with new operating system??

would use iphone?if apple replaces ios with new operating system??would you buy any iPhone ??also you could not buy any iPhone 7,with any ios?

Apple have just updated their iOS to iOS 8 so what are you on about?
Do you have a valid question here or not?

Anyone tried using LDIF file in the User Profile Synchronization Process?

Microsoft pushied an article recently talking about using LDIF file in the SharePoint's user profile synchronization.
Configure profile synchronization using a Lightweight Directory Interchange Format (LDIF) file (SharePoint Server 2010) http://technet.microsoft.com/en-us/library/ff959234.aspx
Currently I am unable to obtain the required "Replicate Directory Change" permission set up by the AD admin. So I thought of exploring this alternative since I still have AD search permission right now.
So far, I was able to set up the MOSSLDAP-LDIFMA, and use an import.ldif file to add, remove and update user profiles. However, there are some problems that I can't resolve. One of key problems is, the LDIF-imported records can't be
sync'd with login-based records.
In my environment, when a user login SharePoint via Windows authentication, a new profile would be added, under the account name "domain\username". Meanwhile, when an LDIF record imported, there will be another profile created under the account
name "domain:domain\username", or "domain:username". That is, there would be two profiles for each user.
Based on my understanding, it is very likely the user profile synchronization is based on the user's account name. But in document and sample files provided, I can't find out any clue how to prepare the ldif file so that it will update the
matching records, instead of creating new ones.
Any help? Thanks in advance.

Has anyone managed to get this to work?
It's nice that Microsoft offers the ability to import user profiles via LDIF into SharePoint, but it is useless if the account name is not correct after the import. I have tried multiple imports from the LDIF to get a user account to show up as "domain\username" but
it always ends up as "domain:domain\username", or "domain:username". or a variation
of these 2 with a colon separating the domain form the username. i see that multiple people have had the same problem, but unfortunetaly can't seem to find a solution. Also I see Bradley mentions that he was able to import accounts using get-QADUser,
but he doesnt mention what the accounts import as or if it resolved the domain colon issue.
Thanks in advance for any help or information anyone can provide.
cheers,
Zed

Sharepoint 2010 use fulltextsearch query to search user profile

Hello all,
I have a problem with FullTextSearch query for user profile:
I have the query below:
SELECT PictureURL, TitleOfPersonal, PersonalTitle, Lastname, Firstname, AccountName, JobTitle, Department, workemail, EmployeeID, Empid, Exten, LeftDate, JoinDate
FROM SCOPE() WHERE "scope"='People' AND (Department = 'CEO Office' OR Department = 'Marketing & Business Development Department' OR Department = 'Medical Department' OR Department = 'Finance Department' OR Department = 'COO Office' OR Department
= 'Document Management & Translation Department') AND empID != '' ORDER BY LastName
But this query does not return any result!
Could someone help me on this ?
Thank you very much !

Hi,
According to your post, my understanding is that you want to search user profile using FullTextSqlQuery.
Please try to use the query below:
SELECT PictureURL, TitleOfPersonal, PersonalTitle, Lastname, Firstname, AccountName, JobTitle, Department, workemail, EmployeeID, Empid, Exten, LeftDate, JoinDate
FROM SCOPE() WHERE "scope"='People'
If the query works, please use CONTAINS(DEPARTMENT,'<value>') instead of
Department = '<value>' .
Here is a discussion for you to take a look at.
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/880086f7-5a54-454b-80c5-a676df19d83c/sharepoint-2010-fulltextsqlquery-query-problem-with-where-condition?forum=sharepointdevelopmentprevious
If there still no result returns, please provide more code for further research.
Best Regards
Dennis Guo
TechNet Community Support

Repalce old user ID with new user ID in Org Plan

Hi,
I have a requirement. In our company, we have different type of user IDs for permanent employees and contractors.
Whenever the contractors postion gets confirmed we will create a new user ID for that person.
Now this new user ID has to be updated in the SRM org plan.
As the user's old user ID is already assigned in the org plan and at the same time user have created lot of shopping carts, we want to replace his old user ID with the new one so that all the shopping carts will not get deleted.
Basically I want to know, how to unassign the user ID from business partner and assign a new user ID.
Is it possible to replace like that? Please advise.
Thanks,
SS
Edited by: SRM Stranger on Apr 10, 2009 1:26 AM

Hi,
I noticed a feature in txn: BP --> Relationship
In the relationship category, I could see two categories: Replaced by, Is replacing. Not sure what is the exact functionality of that.
Do any one knows about that feature? Could you please advise me on that field?
Also, Is it possible to change the validity period of BP or user assignment ?
Will the above two resolve my issue?
Since user has created many shopping carts and user needs access to those SC with his new users ID, I would like to confirm with you before taking any risk.
Please help.
Thanks,
SS
Edited by: SRM Stranger on Apr 10, 2009 4:32 PM

Using Copy Express to copy user profiles

Hi Experts,
I have two B1 2007 A databases running. Right now i need to move all the users in one of the DB unto the other one which already contains some users and their assigned authorizations.
Kindly assist me regarding which specific nodes to pick from the copy express window in order to get all the user profile table and its related tables as well as authorizations from the source copied to the destination.
Thank you.
John

Using the Copy Express, uncheck all the checkboxes.
Then click the User codes and then check the 'dependencies' checkbox as well, and the easiest would be to just check the boxes that are marked as dependent for the user codes.

Using older Extreme as a wifi extender with new tower extreme

Howdy. Trying to set up extended WiFi and having a terrible time. Have new extreme tower as base station as plugged in to cable modem. Trying to use Los Extreme as extender. Took both to Apple store and asked for help. Tech guy said no problem and configured it. I put in same wifi password and hoped I would have plug and play but to no avail. Have used utility to rename old extreme the same as new new extreme and with the same password. No luck. Problem is I do not know enough about "advanced" settings in utility to make this happen. Have 2 iPads and two iPhones (wife and I) plus a LENOVO DESKTOP. any suggestions would be helpful. Thanks.

Trying to use Los Extreme as extender.
Is this another "tower" version of the AirPort Extreme, or a previous "flat, square" version, or an older "round' or "dome" shaped AirPort Extreme?
Trying to set up extended WiF
Will the old Extreme "extend the network by connecting too the new AirPort Extreme using a wired Ethernet connection? (highly recommended for best performance).......or......are you planning to try to use the old Extreme to wirelessly extend the network?
is the "new" AirPort Extreme that you have set up and working correctly at this time?
If your old Extreme is compatible with new version of the Extreme, it is easier for most users to use an iPad or iPhone to configure the setup.....but a Mac could be used as well.
Do you know what operating system the Mac is using? If not, click the Apple icon in the upper left corner of the screen and then click About This Mac. Post back with the OS X Version that you see there.

OD Upgrade: merge backed up user data with new accounts?

Hi All,
After trying many paths to upgrade a 10.6.8 OD server to 10.10 we gave up on export / import of the whole directory. We kept running into the “Existing connection is not authenticated” error caused by some kind of certificate mis-match. Searching for fixes inevitably led to this article which indicates the “rekerberize” method should not be used on Yosemite.
So we punted and installed everything clean from scratch. We think we found a method that restores all users and their home dirs. I’m posting here to see if anyone may critique our method as unsafe. We’ve done some testing but users are not let loose on the new system yet so we aren’t quite 100% certain.
The basic steps we eventually took were:
Grab export of users from 10.6 server
Fresh install of OS X 10.10, patch to 10.10.1 (cloned old system first so we can always go back)
Install Server
Correctly configure DHCP and DNS and File Sharing
Create Directory
Create self signed cert (this was necessary to get 10.6 clients to auth; 10.10 clients work out of the box)
Edit user export file to fixup change in FQDN: %s/<old_fqdn>/<new_fqdn>/g
Import users into Directory using the fixed up export file
Copy user home dirs from 10.6 backup into new file share (the user home dir path matches the fixed up export file)
chown each user dir to the new user: sudo chown -R <user>:students /Users/<user> (In earlier passes at the upgrade, we also propagated permissions and ACLs from within Server.app at this step. But the fresh install didn’t seem to need this — chown appears to be enough.)
The Keychain came across with wrong perms and instead of resetting the perms, it made more sense in our case to just delete it: sudo rm -rf /Users/<user>/Library/Keychains
We’ve done a reasonable amount of testing and it looks like all of the user’s files are accessible and working fine. I expect we may find some application data in user home dirs that may have wrong perms (like keychain did) or otherwise be incoherent to the new system. But so far we haven’t found any such issues.
So the crux of this post is: Is it prudent to import user data from another system and expect a simple chown command will make all right with the new system? Or are we glossing over some low-level fundamental (Server File Sharing ACLs?) and creating a time-bomb that will only go off after a week of user data changes at which point any path back out will involve user data loss.
We’re going to start letting some users log on and grab their home dirs in the next day or two. Any and all comments are welcome.
Thank you,
-J

Use Migration Assistant to restore your user files. You can find this application in /Applications/Utilities, so connect the external drive with your files, open Migration Assistant and follow the steps. Migration Assistant will create a second user account with your restored files.
Migration Assistant will let you restore everything you had before (applications, pictures, music, videos...) and will let you choose which folders you want to restore. As you want to restore the iTunes library, make sure you check the Music folder.
Respecting to iPhoto, that application is not included with OS X, so you have to download it from the Mac App Store. Just open it, log in with your Apple ID, go to Purchases and download it free of charge.

Oracle user .profile change and running Database

We have 1 Oracle Database (9i) running on AIX Server for long time. Now we are making some room to create second database. We would like to make change to Oracle User .profile , so it would prompt to specify ORACLE_SID upon login under oracle to UNIX. Also we would add new entry in oratab for new database. However we will not be creating this database for another couple of weeks. Could this cause some trouble for currently running Database? Could existing backup jobs, stats job and other monitor jobs fail on existing running DB?
Let me know if you need more information to help us on this question

This is very unlikely, though it would depend on how you developed the jobs you discuss. Without these jobs: no problem.
What I do with multiple databases on Unix boils down the following.
In /etc/profile, I set up a env var DEFDB
In .profile of Oracle I set ORACLE_SID to the value of this DEFDB, and I set
ORAENV_ASK to "NO". I run oraenv (which is in /usr/local/bin), and I leave ORAENV_ASK set.
I don't want oraenv asking for a database during login, and I want to issue
export ORACLE_SID=<some value> prior to running oraenv manually.
Sybrand Bakker
Senior Oracle DBA

Can I install Linux for Windows on my Apple Mac and afterwards use old windows programs as PageMaker on my new Mac. If yes where can I find Linus windows for Mac

Can I install Linux for Windows at my new Mac and afterwards use old Windows programs as Photo Shop and PageMaker on my Mac? If yes where at the Internet can I find Linux for Mac and Windows?

What is your definition of a "Linux for Windows" ?
There is Linux like Ubuntu which can be installed on a Mac
See the UbuntuForuns here https://wiki.ubuntu.com/MactelSupportTeam
And there is Microsoft Windows which can be installed and used on a Mac with Apples BootCamp http://www.apple.com/support/bootcamp/ or through Virtualization apps like Parallels, VMWare Fusion or VirtualBox.
Windows Programs don't run in a Linux only in Windows.
Stefan

Using Business Area and Profit Center Accounting with New GL functionality

Hello,
We are Public Sector and using ECC 6.0, we have been using Business Area with Fund Management. We also use Special Purpose Ledger with Document splitting. Before migrating to New GL functionality, we want to understand
-     The possibility of using both Business Area and Profit Center Accounting, and the impact on the system
-     If we activate Profit Center Accounting before migration, how will it work with the splitting process?
-     If we migrate without Profit Center Accounting, will this cause the activation of Profit center accounting later to be more complicated, even if we migrate again?
Thanking you

Hi Sachin,
Thank you for the reply, we want to know that
-     The possibility of using both Business Area and Profit Center Accounting, and the impact on the system
If we decide using Profit Center Accounting with Business Area with New GL functionality how we should do it
-     should we activate classical Profit Center Accounting before migrating to New GL functionality, if we do this how will it work with the splitting process?
-     If we migrate to New GL functionality without Profit Center Accounting, will this cause the activation of Profit center accounting later to be more complicated, even if we migrate again?
Thanking you
Tipu Khan

How to edit the cube with new fields without changing historical in BI 7.0

HI,
I have requirment that need to edit cube with new fields and without changing historical data on it.
Please some one can advise me abt the above scenario.
Note:I am using BI7.0

hi Krish,
In BI 7.0,
we cannot add a characteristic to an existing dimension if the data is not deleted from the cube.
It can go to a new dimension and that will not change the existing structure of the cube tables, but will just add to it (as another dim table). or use remodeling.
for more details, please seach threads.....
with hopes
ARS

Use old domain controller AD user profile with new domain (profile changed)

Similar Messages

Maybe you are looking for