Use renderForm's sContentRootURI with password url

Hi,
I would like to have the renderForm method retrive the xpd form from a password protected website. Unfortunately sContentRootURI doesn't take a URL like:
sContentRootURI = "http://user:password@testserver:8080/webdav/path/to/dir";
It gives the following exception:
ERROR - java.rmi.RemoteException: com.adobe.formServer.interfaces.FormServerException: URI not found
So I'm kind of lost seeing how to do this. Anyone know a solution?
Best regards,
Nicholas

I am having a similar problem.
The submit button on my form goes to a password protected URL. Also, my form is Reader Extended so the user can take it offline and fill it out. However, when the use the submit, instead of going to the URL, it opens a temporary HTML page on the user's C: drive.
Is there a way to pass credentials in a URL?
Would something like Policy Server help solve this problem?

Similar Messages

How to use a MATLAB license with password peotection?

I am using a MATLAB network license, which is password protected, so when I use a MATLAB script node LabVIEW can't load the proper MATLAB license and fails.
How can I submit the username+password info to LabVIEW?

Hello malosh,
Unfortunately the functionality is not in place for LabVIEW to pass your username and password into MATLAB for you. Is it possible to log into MATLAB and then run your LabVIEW application?
If none of these suggestions help, or if I�m not correctly understanding your issue, please reply with comments or answers to the discussion above and any additional information that may help, and I�ll be happy to look further into it.
Have a nice day!
Robert Mortensen
Applications Engineer
National Instruments
Robert Mortensen
Software Engineer
National Instruments

How does firefox know it should use specific client certificate with a URL?

I am trying to determine how Firefox, or any browser for that matter knows which client SSL certificates it should prompt the user for when an authentication attempt occurs.

Maybe check the Firefox source code.
*http://mxr.mozilla.org/mozilla-release/source/netwerk/dns/nsHostResolver.cpp
*http://mxr.mozilla.org/mozilla-release/source/netwerk/dns/nsDNSService2.cpp

Encrypt with password- Help

I created a pdf, used Advanced/Security/Encrypt with Password. I did not provide a password.. Acrobat must have. How do I find or fix?What did acrobat use to create the password? I was expecting a prompt. Next thing I know its protected with an unknown pw? Help.
Thanks
It is looking for a 'permissions password'. I did not provide one. My bad here it seems.

It's impossible not to enter a password when applying protection using that menu item. Acrobat wouldn't make one up and will not accept a blank entry on the dialog box.
Are you sure you didn't apply a previously-created Security Policy, in which you chose to store the password inside the policy?

Portal with a URL using a Web browser in java stack

Dear all,
I can access the portal with our URL using a Web browser from your client machines .
i got the following option :
SAP Library
SAP Library contains the complete documentation for SAP Web Application Server.
Web Services Navigator
Web Services Navigator is a tool that gives you a short overview of a specific Web service based on its WSDL, and enables you to test your Web service by creating and sending a client request to the real end point.
System Information
System information provides administrators with an overview of the system configuration and its state. It shows all of the system's instances and processes, their current state and important parameters (such as ports) that may be required for support cases, as well as the versions of the components installed.
UDDI Client
The UDDI client provides query and publishing functions for different Web service entities (tModels, business services) to any UDDI compliant registry.
User Management
The user management administration console provides administrators with the functions they need to manage users, groups, roles, and user-related data in the User Management Engine (UME). Users without administrator permissions can use it to change their user profile.
Web Dynpro
Web Dynpro is a User Interface technology available within the SAP NetWeaver Developer Studio.
Various Web Dynpro tools provide administrators and application developers with performance measurement and application administration capabilities. The Web Dynpro runtime is already deployed.
SAP NetWeaver Administrator
A tool for administration and monitoring, offering a central entry point to the whole SAP NetWeaver system landscape. The SAP NetWeaver Administrator can be used in a central scenario where it is capable of operating an entire system landscape containing ABAP and Java systems as the application platform of SAP NetWeaver.
J2EE Engine Examples
This section contains several J2EE application examples that run on the J2EE Engine. The examples show some of the functions of both Java and the J2EE Engine. They can be easily deployed and tested by simply clicking on a button. The full source code of the examples is also available.
when i click System Information:
it ask user name () J2EE_ADMINand password (Installtion master password) ,after entered , i got below error .
You are not authorized to view the requested resource.
Details: No details available
Kindly suggest .

Hello
It means what it sais, your J2EE_ADMIN user doesn't have enough authorization.
Chech if the appropriate authorization is assigned in your abap stack which belongs to the java stack you logon to:
Role SAP_J2EE_ADMIN should be assigned to user J2EE_ADMIN.
Kind regards
Tom
Edited by: Tom Cenens on Dec 17, 2010 2:55 PM

Need work around for image gallery with password protected URLs

Is there a way to display an image gallery that has password protected URLs?
I can build the image gallery in Siena using an excel table with a list of the images and when I preview the app inside Siena I get the expected credentials prompt from IE, and I enter the credentials and the images load and display with their captions perfectly.
There are 4-6 images in the gallery.
When I publish and produce a store app, the app errors out with can’t connect and obviously fails on
var GenericInitError = "The app could not connect to the server. Please try again later.",
GenericInitTitle = "Network error";
Most likely because Siena wants to preload everything and there is no way with preload to enter credentials.
I am looking for any alternatives that would let me get around this.
TIA
-- Barb Bowman

On Mon, 24 Mar 2014 05:10:01 +0000, Radu Gruian (MSFT) wrote:
>One possible thing to do would be download and embed the images into your app, eliminating the need for password-based authentication.
Nope. The app accesses a group of IP Security cameras. Static images would not
make any sense. And authentication is required. Not negotiable.
-- Barb Bowman

How to create PDF from Excel with Password Protection Using Visual Studio & Visual Basic

Could someone provide some VB code sample(s) to create a PDF file with password protection (Security Method - Password Security - Restrict Editing & Printing)?
I create a bunch of reports every week using an Excel 2010 addin that subsequently must be printed to PDF. I then have to manually edit the properties of each document in order to apply the printing restriction.
I'm using Acrobat X.
I've downloaded the SDK but have no idea which dll's to use or where to begin.
Thanks!
Ross

That's surprising & disappointing. I would have thought that this capability would have long since been requested.
Thanks for the heads up.

HT204053 A year ago I sat up my daughters iPod and used my Apple ID and password to do it, as I have an iPhone. She just got a iPad for Christmas and I sat this apple product up with her own Apple ID and password. Can we still sync her apps and music from

Last year my daughter received an iPod for her birthday. I sat it up using my Apple ID and password that I use with my iPhone. For Christmas she got an iPad mini and it was sat up this time with her own Apple ID and password. Just wondering if there is any way to transfer or sync the apps and music that she has on her iPod to her iPad even though they have different apple IDs and passwords?

Welcome to the Apple community LSeaward.
Unfortunately, you can't transfer content from one ID to another.

My wife had an iPad for a year and synced to our computer with no problem. I recently received an ipad2 and when I tried to sync using separate apple and iTunes passwords, under her computer user name, it appears I over-road her account and synced all he

My wife had an iPad for a year and synced to our computer with no problem. I recently received an ipad2 and when I tried to sync using separate apple and iTunes passwords, under her computer user name, it appears I over-road her account and synced all her apps with my apps on my iPad. I then set myself up as a new user on our computer and tried to sync. I now get the error that my iPad is synced to another library. How can I start over without erasing all my data on the iPad?

Go back to her login. Unless you deliberately erased apps, they should all be there, both yours and hers! Then, you need to set up each iPad separately. You will notice that they have separate names for that very purpose.
There is no problem with multiple Apple IDs on the same iTunes on the same computer except... Apps are permanently associated with the ID that was originally used to obtain them. If you choose to update an app from inside iTunes and you're logged into the "wrong" ID, you must log out and back in again.
On the bright side, you can configure either or both iPads to sync with apps and music and movies, etc. from either or both IDs. Further, if you choose to update the apps from the iPads themselves, there is no need to log out/in. The device handles that. All you need is the correct password. In my case, I use the same password for both IDs to make things easier.

So I just bought a used MacBook from Amazon with OSX 10.5.8. I am trying to install new software and operating system, but I don't have the passwords to the Users set up in the computer. What do I do?

So I just bought a used MacBook from Amazon with OSX 10.5.8. I am trying to install new software and operating system, but I don't have the passwords to the Users set up in the computer. What do I do?

Put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Reset Password. After resetting the password use Startup Disk from the same menu to choose your hard drive for startup and restart.

Using Windows 8.1 with Directx11, when I lauch Photoshop Elements Organizer, I see the error message "DirectX could not be initialized. Please be sure that it is installed on your system. You can download the latest DirectX installer from:[URL] I have the

Using Windows 8.1 with Directx11, when I lauch Photoshop Elements 12 Organizer, I see the error message "DirectX could not be initialized. Please be sure that it is installed on your system. You can download the latest DirectX installer from:[URL] I have the latest version, Directx11, as verified by running dxdiag.

Maybe you need to enable Direct Play under Legacy Components in the Turn Windows Features on or off dialog.
1. Right click on the windows start Logo on the taskbar, select Control Panel and click on Programs
2. Under Programs and Features click on Turn Windows Features on or off and then under Legacy Components enable Direct Play

Updated my AppleID account info. Under password security shows an email address to be used to receive email with new password settings. I need to update that email address, how do I do that? Thanks!

Updated my AppleID account info. Under password security shows an email address to be used to receive email with new password settings. I need to update that email address, how do I do that? Thanks!

Thanks for the help Niel. I couldn't change the rescue email address (an address that no longer exists and is therefore useless) until I could correctly answer the security questions. After numerous guesses, finally got them right. Was then presented with the option to change the rescue email address. Guess the only other option was to have Apple Support make the change or reset my account info. Have made note of the correct answers so this won't happen again. Thanks for the fast response!!

Error when Connect to Access 2007 with password using OLEDB

Hi there,
I am seeing the below error when trying to Connect to Access 2007 with password using Crystal XI or Crystal 2008, when using the OLEDB to connection Access data.
Logon failed
Details: DAO Error Code: 0xd0f
Source: DAO.Workspace
Description: Unrecognised database format 'path to database\crs project database.aaadb
Get though when I use Access 2007 without password setup.
Many Thanks for any one can help.
Daphne Li

As a copy of this query has been posted to the CR design forum at 11:21, assuming this is indeed a design question.
Thus setting this thread as answered.
- Ludek

How to email a pdf file (attachment with password) using ABAP?

Hi Colleagues,
I
n abap, how do you email a pdf file that contains password?
(pdf with password, not the whole email).
A custom program is created. Inside this program, it
retrieves the spool number and converts it to a pdf file
(using function module '....abapspool...'). No parameter to put password.
I was able to do the above. The problem is how to put password on
the pdf file.
Once the user receives the email (say from hotmail or outlook) with pdf attachment, clicks on the pdf, it will as ask for an attachment.
sap version 4.7.
Questions:
- how to code in ABAP to include the pdf with password in an email
received from hotmail or outlook?
- any function modules or classes that can do the pdf password?
- do we need to install another technology or add-on application or
???? to do it? If yes, do we code in abap?
- any other ideas?
Thanks in advance.
Raymund

Hi Colleagues,
I
n abap, how do you email a pdf file that contains password?
(pdf with password, not the whole email).
A custom program is created. Inside this program, it
retrieves the spool number and converts it to a pdf file
(using function module '....abapspool...'). No parameter to put password.
I was able to do the above. The problem is how to put password on
the pdf file.
Once the user receives the email (say from hotmail or outlook) with pdf attachment, clicks on the pdf, it will as ask for an attachment.
sap version 4.7.
Questions:
- how to code in ABAP to include the pdf with password in an email
received from hotmail or outlook?
- any function modules or classes that can do the pdf password?
- do we need to install another technology or add-on application or
???? to do it? If yes, do we code in abap?
- any other ideas?
Thanks in advance.
Raymund

How to enable private mode from commandline, with an URL. I am a software dev and I wish to have my application open links in Firefox. Using ShellExecute(), i c

How to enable private mode from commandline, with an URL.
I am a software dev and I wish to have my application open links in Firefox.
Using ShellExecute(), i can do with with commandlines like:
firefox.exe http://support.mozilla.org
But I also want the option to open the link in private mode.
I am able to start firefox in private mode by doing this:
firefox.exe -private
However, if I add a link to the command line
firefox.exe -private http://support.mozilla.org
I get strange results.
If firefox is not running, it launches 2 copies of the application.
One that opens in private mode and the other opens in normal mode and goes to the URL specified.
If firefox is already running, it just opens the URL in a new tab.
No private mode instance is launched.
Am I using the command-line syntax incorrectly?

It will never work if Firefox is already running as Firefox will use the already opened Firefox instance. 
In that case only using a separate profile will work.
You can try to specify the -url switch as well.
*firefox.exe -private -url http://support.mozilla.org
You can also look at the -new-tab switch.
*firefox.exe -private -new-tab http://support.mozilla.org
*https://developer.mozilla.org/en/Command_Line_Options

Use renderForm's sContentRootURI with password url

Similar Messages

Maybe you are looking for