Use splitter to create multiple text file

Hello I have one view as source and would like to create multiple target text files based on different condition. What I am doing is that I am using SPLITTER which contain one INGRP1 and three OUTGRP( nameley TR1, TR2 and TR3) and one default REMAINING_ROWS ( what is the purpose of the REMAINING_ROWS?). So I mapped view to INGRP1 of the splitter and then added the different SPLITT condition in the condition wizard, for example :
for TR1
COMMISSION_TYPE='P' and
rownum <= 65000
for TR2
COMMISSION_TYPE='P' and
rownum > 65000
and for TR3
COMMISSION_TYPE='A'
After this since I have to create 3 comma delimted text files, I have used 3 expression for each individual splitt condition. In the expression what I am doing is that I am just concating all the fileds and then output of each expression goes to three different text files.
When I am deploying the mapping, it is coming up several errors such as :
1): PLS-00201: identifier 'COMMISSION_TYPE' must be declared
(2): PL/SQL: Statement ignored
(3): PLS-00201: identifier 'COMMISSION_TYPE' must be declared
(4): PL/SQL: Statement ignored
(5): PLS-00201: identifier 'COMMISSION_TYPE' must be declared
(6): PL/SQL: Statement ignored
(7): PLS-00201: identifier 'START_INDEX' must be declared
(8): PL/SQL: Statement ignored
(9): PLS-00201: identifier 'T_EXPR_ASSET_1_OUTPUT_ASSET$0' must be declared
(10): PL/SQL: Item ignored
(11): PLS-00201: identifier 'T_ROWKEY_SPLIT_2' must be declared
(12): PL/SQL: Item ignored
(13): PLS-00201: identifier 'T_CPPASSET_0_OUTPUT_ASSET$0' must be declared
(14): PL/SQL: Item ignored
(15): PLS-00801: internal error [21076]
(16): PL/SQL: Item ignored
(17): PLS-00801: internal error [21076]
(18): PL/SQL: Item ignored
(19): PLS-00801: internal error [21076]
(20): PL/SQL: Item ignored
Why I am getting these errors, why OWB generated code could not identify COMMISSION_TYPE filed?
Please help me.
Suhail

I am really very very sorry, its my fault. I was not mapping COMMISSION_TYPE from view to splitter.

Similar Messages

Using AppleScript to create a text file, based on an OCR'd file's content

Hey guys, I've got an interesting situation.
I was wondering if there would be anyway to use something like AppleScript (or the like) to create a text document and fill it with information based on what is found in an already OCR'd file?
For example: I have a paycheck stub. The stub contains the words "Gross Pay" and the value "$xxxx.xx" on one line. Using Hazel to identify paychecks (based upon filenames), could I then use something like AppleScript, to create a new text file, and then pull the text from the line that contains the word's "Gross Pay" and insert it into the text file's next line?
Ex:
March 26,2012
Gross Pay                   $xxxx.xx
April 6,2012
Gross Pay                   $xxxx.xx
Kind of how TurboTax's iPhone app pulls text from an image, then uses the values to insert it into the app's appropriate fields?
I know this may be a lot to ask, but any help is appreciated. Thanks!

StevenD: FYI, I did NOT give you the one star rating. I would never do that!
StevenD wrote:
Ow. Someone is grumpy today.
Well, this is an assignment, so it is probably homework.
Why else would anyone give HIM such an assigment, after all he has no LabVIEW experience and the tutorials are too hard for him?
This would make no sense unless all of it was just covered in class!
This is not a free homework service with instant gratification.
OK! Let's do it step by step. I assume you already have a VI with the digital indicators.
"...but have no idea where to begin".
open notepad.
decide on a format, possibly one line per indicator.
type the document.
close notepad.
open LabVIEW.
Open the existing VI with all the indicators.
(are you still following?)
look at the diagram.
Who made the program?
Does the code make sense so far?
Is it a statemachine or just a bunch of crisscrossed wires?
Where do you want to add the file read?
How should the file be read (after pressing a read button, at the start of the program ,etc.)
See how far you get!
Message Edited by altenbach on 06-24-2008 11:23 AM
LabVIEW Champion . Do more with less code and in less time .

How do I create multiple text files from a list in another file?

I have a text file with data in it:
1. Bristol
2. Bath
3. Exeter
etc
I want to run an action which outputs the following files:
1.txt (contents: 1 Bristol)
2.txt (contents: 2.Bath)
3.txt (contents: 3.Exeter)
I can't work ou how to do this, any help appreciated. Thanks
Dave

Hi mate, thanks for the suggestion. I saw that section in the user guide - but it is only for copying from one library to another - I want to copy from an FCP library to a file structure OUTSIDE FCP. I have had problems with FCP losing media when copying to another library so I just want the files in the Finder where I can see them...
Stephen

Setting Font for converting multiple text files into PDF using VB 6.0

Dear All,
Am converting multiple text files into PDF using VB6.0. Currently, am unable to control the font face and size for the generated files. Below is the procedure am using for each file;
Public Sub proc_convert_to_PDF(srcFilename As String, destFilename As String)
Dim p_AcroApp As CAcroApp
Dim p_VDoc As CAcroAVDoc
Dim p_DDoc As CAcroPDDoc
Dim IsOk As Boolean
Set p_AcroApp = CreateObject("AcroExch.App")
Set p_VDoc = CreateObject("AcroExch.AVDoc")
Call p_VDoc.Open(srcFilename, "")
Set p_VDoc = p_AcroApp.GetActiveDoc
If p_VDoc.IsValid Then
Set p_DDoc = p_VDoc.GetPDDoc
' Fill in pdf properties.
p_DDoc.SetInfo "Title", Format(Date, "dd-mm-yyy")
p_DDoc.SetInfo "Subject", srcFilename
If p_DDoc.Save(1 Or 4 Or 32, destFilename) <> True Then
MsgBox "Failed to save " & srcFilename
End If
p_DDoc.Close
End If
'Close the PDF
p_VDoc.Close True
p_AcroApp.Exit
'Clear Variables
Set p_DDoc = Nothing
Set p_VDoc = Nothing
Set p_AcroApp = Nothing
End Sub
What I need;
1) to be able to set the font face of the destination file ( destFilename)
2) to be able to set the font size of the destination file ( destFilename)
Am using Adobe Acrobat 7.0 Type Library
Kindly Help.
Thanks in advance

We didn't say it doesn't work. We said it isn't supported.
There are a number of other ways to make a PDF. The one which would
give the most control is if your application directly printed to GDI,
controlling the font directly. This could print to Adobe PDF.
You could look for an application that gives control of font for
printing.
You could use a text-to-PostScript system and distill the result. You
could even look for a non-Adobe text-to-PDF.
Working in the unsupported and dangerous world you chose, the font
size for text conversion is set (and this is very bad design from
Adobe) in the settings for Create PDF > From Web Page. There is no API
to this.
Aandi Inston

HOw to create a text file in the given path and delete it after the use?

Hi all,
I am trying to create a text file at the given path and delete the created file after the use.
I am using following code.:
import java.io.*;
// write binary data as characters
public class RanIO {
                                        public static void main(String f[])
                                                  // First illustrate append
                                                  String lineSep = "\n";
                                                  try {
                                                                 File temp= new File("C:/Ash","cute.txt");
                                                  boolean ch=temp.createNewFile();
                                                  if(ch)
                                                       System.out.println("file created");
                                                  else
                                                  System.out.println("file Not created");
                                                  //writing to file
                                             /*     PrintWriter p = new PrintWriter(new BufferedWriter(new FileWriter("cute.txt",true)));
                                                  p.print("Emp NO");
                                                  p.close();*/
                                                            // Open fileWriter in append mode
                                                                           FileWriter fos = new FileWriter(temp, true);
                                                                           BufferedWriter bw = new BufferedWriter(fos);
                                                                           PrintWriter pw = new PrintWriter(fos);
                                                                           double d=550;
                                                                      // lineSep = System.getProperty("line.separator");
                                                                      pw.print("Hello");
                                                                      //pw.print( lineSep );
                                                                      pw.print( d );
                                                                      pw.close();
                              boolean det=temp.delete();
                                             if(det)
                                                  System.out.println("File deleted");
                                             else
                                                  System.out.println("File not deleted");
                                             } catch (IOException ioe)
                                                            System.out.println( "Append IO error:" + ioe );
My problem:
1)
I am not able to write to the file. I want to know, where i am going wrong.
It is giving error message like
"Canot resolve Symbol: temp,"
But, FileWriter Constructor should accept a File type parameter.
here temp is a file parameter.
If i am not using file=new file();
i can't delete the file after the use. i.e if i use
PrintWriter p = new PrintWriter(new BufferedWriter(new FileWriter("cute.txt",true)));
how can i delete cute.txt after the use?
2)
I am not able to write to the text file. file is created but, a blank file.
"Hello" is not written into the text file.
can anyone help me in this regard
Thanks in advance
Ashvini

Thank you Ram,
But, i want to create a text file in Append mode.
for that i used
FileWriter fos = new FileWriter(temp,true); But, it is not accepting FileWriter constructor in
this format. if i use
FileWriter fos = new
FileWriter("c:/ash/cute.txt",true); it works fine. !!!!!Here's the javadoc
public FileWriter(File file,
boolean append)
throws IOExceptionConstructs a FileWriter object given a File object. If the second argument is true, then bytes will be written to the end of the file rather than the beginning.
Parameters:
file - a File object to write to
append - if true, then bytes will be written to the end of the file rather than the beginning
Throws:
IOException - if the file exists but is a directory rather than a regular file, does not exist but cannot be created, or cannot be opened for any other reason
Since:
1.4
Are you using jdk.13 or lower ?
>
ONe more doubt, Does flush method deletes a file?
if not, then i need to use
File temp=new File("c:/ash/cute.txt");
FileWriter fos = new FileWriter(temp,true); //which
is again a problem
if(temp.delete())
out.println("File is deleted");
}I don't know whether i am taking it wrong ! or
anything wrong with my coding ! but, after creating
and writing data into a text file. I must delete it
as it contains confidential informations.
Regards,
Thanks.'flush' writes to a file immediately. Else you should explicitly call 'flush' to write contents from buffer to underlying source.
javadoc again
PrintWriter
public PrintWriter(Writer out,
boolean autoFlush)Create a new PrintWriter.
Parameters:
out - A character-output stream
autoFlush - A boolean; if true, the println, printf, or format methods will flush the output buffer
cheers,
ram.
Question; What do you gain by opening a file, writing to it and deleting it in the same program ?

Not able to create a text file in Client Machine using Forms 10g

Hi - I'm mot able to create a text file in Client Machine using Forms 10g. I'm getting error when system executes the bolded line.(i.e. CLIENT_TEXT_IO.FOPEN). During run-time system is throwing "ORA-06508: PL/SQL: could not find program unit being called".
I had attached webutil.pll in the form.
Please advise me.
DECLARE
l_Temp CLIENT_TEXT_IO.FILE_TYPE;
LC$Name Varchar2(100) ;
LC$Fic Varchar2(100) ;
LN$Lines Pls_integer := 0 ;
LC$Line Varchar2(4000) ;
Cursor C_CUR Is
Select * From TEST_TEXTIO where rownum <= 50;
BEGIN
LC$Name := 'tmp_file.txt' ;
LC$Fic := 'c:\temp\tmp_file.txt';
Begin
l_temp := CLIENT_TEXT_IO.FOPEN( 'C:\temp\tmp_file.txt', 'W');
Exception
     when others then
     message( 'OPEN FILE ERROR ' || LC$Fic ||sqlerrm );
     display_error;
     raise form_trigger_failure;
End ;
-- Write the lines --
For Cur In C_CUR Loop
     LC$Line := Cur.CODE || ' -> ' || Cur.COL1 || ',' || Cur.COL2 || ',' || Cur.Col3 ;
     CLIENT_TEXT_IO.PUT_LINE( LF$File, LC$Line ) ;
     LN$Lines := C_CUR%ROWCOUNT ;
End loop ;
-- Close the file --
CLIENT_TEXT_IO.FCLOSE( LF$File ) ;
Exception
     When others Then
message('err='||sqlerrm);message(' ');
display_error;
CLIENT_TEXT_IO.FCLOSE( LF$File ) ;
     Raise ;
END;
Thanks.
Arun

Hi ,
i have one Question though its not related to thos question if some could help me it will be really helpful,
i have created one program to import and export excel to forms vice versa, if the form is attached with webutil its working fine am using ole2.but i have a new idea if i add this program in menu, it can be used for all the forms attched to that menu, i made program also, but problem am facing right now is if the form is not attched with webutil it will not work so is there possiblity to share my webutil from one form to another form ,so i will keep one form as a interface form in that webutil will be attched ,i can share that webutil to all other forms so that all the forms no need to attach webutil again
if its possible means please suggest some ideas

I was given an assingment, but have no idea where to begin. The assingment is to create a text file using notepad with all of my digital inputs and some how make those imputs show up on my digital indicators on my control pannel

I was given an assingment, but have no idea where to begin. The assingment is to create a text file using notepad with all of my digital inputs and some how make those imputs show up on my digital indicators on my control pannel.
When it was explained to me it didn't sound to hard of a task, I have no LabVIEW experience and the tutortial sucks.

StevenD: FYI, I did NOT give you the one star rating. I would never do that!
StevenD wrote:
Ow. Someone is grumpy today.
Well, this is an assignment, so it is probably homework.
Why else would anyone give HIM such an assigment, after all he has no LabVIEW experience and the tutorials are too hard for him?
This would make no sense unless all of it was just covered in class!
This is not a free homework service with instant gratification.
OK! Let's do it step by step. I assume you already have a VI with the digital indicators.
"...but have no idea where to begin".
open notepad.
decide on a format, possibly one line per indicator.
type the document.
close notepad.
open LabVIEW.
Open the existing VI with all the indicators.
(are you still following?)
look at the diagram.
Who made the program?
Does the code make sense so far?
Is it a statemachine or just a bunch of crisscrossed wires?
Where do you want to add the file read?
How should the file be read (after pressing a read button, at the start of the program ,etc.)
See how far you get!
Message Edited by altenbach on 06-24-2008 11:23 AM
LabVIEW Champion . Do more with less code and in less time .

Export to PDF - Can a single report (rpt file) create multiple PDF files using the export command?

Post Author: markeyjd2
CA Forum: Exporting
Greetings forum members,
My question is, in its entirety: Can a single report (rpt file) create multiple PDF files using the export command, ideally one PDF file per DB record?
In my case; I have a Crystal Report that reads data from a DB table containing ~ 500 records. When I export the report to a PDF file, I get one PDF file, with ~ 500 pages.
What I would like to do is export the report to ~ 500 individual PDF files; One file per DB record. The file names would be based on the table's primary key.
Is this possible?

Post Author: Micha
CA Forum: Exporting
Hi,
you need some lines of code, but its easy. Dependend on how to start the generation of your 500 PDFs, you can write an ASP page and start it via Web Browser, or a Windows Script and start it via scheduled job...
Here's an abstract of the ASP code I use:
First, you create a recordset (here: "rsc") which gives you the list of ID fields you want to export, then you create CrystalRuntime.Application object, then you loop through the recordset, open your report (here: "oRpt") and set login info. Then set the selectionformula, so that the report displays only the data of the current ID, e.g.:
oRpt.RecordSelectionFormula = "(" & oRpt.RecordSelectionFormula & ") AND {myTab.myVal}=" & rsc("myVal")
Then you export the report, move to the next record in recordset, and repeat the loop until recordset.EOF. Then you close recordset and connection.
Micha

Creating a text file using pl/sql

how can one create a text file using pl/sql?
Say for example abcd.txt in the d: drive
(d:\abcd.txt)
on a windows nt server

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by bhrigu nagal ([email protected]):
thanks for your replies
I had already set the utl_file_dir parameter
I tried the utl package and wrote the following code but got some errors
declare
filehandler UTL_FILE.FILE_TYPE;
begin
filehandler:=UTL_FILE.fopen('d:/intel/','myfile.txt','w');
utl_file.put_line(filehandler,'look masjdfgsd\n');
utl_file.fclose(filehandler);
exception when utl_file.invalid_path then
raise_application_error(-20023,'bhrigu ,chk the path');
end;
the errors
ERROR at line 1:
ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at "SYS.UTL_FILE", line 101
ORA-06512: at "SYS.UTL_FILE", line 157
ORA-06512: at line 4
if u know what this is please tell me
thanks bhrigu
<HR></BLOCKQUOTE>
U need :
1) To have UTL_FILE_DIR param in the init file of the instance with the same directory (don't forget to stop and restart the base)
2) Handled the exceptions listed in the utl_file package (Oracle_home\rdbms\admin\utlfile.sql) in your source.
3) Turn set serveroutput on in SQL*Plus.
Run your procedure and see the error message to debug.
Good luck
null

Using Excel 14.3.7 to create a text file, for saving as a .csv file. Problems with commas.

I have created a text file in Excel, to be saved as a .csv file and uploaded to an online database. The file is rejected. When I open it in textedit I can see that the empty cells ( of which there are several in each row, all in the same columns) contain commas. It looked to me as though this could be the result of tabbing across empty cells. So I created a dummy file with a couple of lines where I tabbed across the whole row including the empty cells, and a couple of lines where I clicked in each individual cell in which I wanted to enter text. Opened in textedit there is no difference between the two type of entry. What can I do to stop Excel or .csv format entering commas in blank cells? Suggestions in simple English appreciated.

http://answers.microsoft.com/en-us/mac/forum/macexcel?tab=QnA

Using Automator to create a text box of certain size

I'm very new to using automator... in fact I haven't used it at all, but I am wondering if I can use it to create a text box of the same size each type to type in within preview (a PDF document). Basically I want to click or push something and have a text box be generated that is the same size each time.
Thanks!

1. In the Finder actions you will need:
- Get Specified Finder Items, and point it towards the folder that will contain the movie.
- Get Folder Contents - to get what's inside the folder.
- Filter Finder Items - set to filter by 'Name Extension' 'Is equal to' 'mov' and make sure all your video files have the right extension...
- Open Finder Items - in QT Player - note that this might cause problems if there are multiple files in the folder...
Then from the QT Player actions:
- Play Movies.
2. Save As... Application, then after saving, drag the app into the login items for the user account.
3. That's going to need some AppleScript, but this thread should get you started:
http://discussions.apple.com/thread.jspa?threadID=455825&tstart=0
Ian

How to create a text file or XML file and add content through code into it...

Hi Everyone,
How to create a text file and add content through the code to the text file eform javascript ......orelse can we create a text file in life cycle designer...
Else say how to create a new XML file through the code and how some content like Example "Hello World".

You can create a text file as a file attachment (data object) using the doc.createDataObject and doc.setDataObjectContents:
http://livedocs.adobe.com/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/JS_API_AcroJS.88.450.html
http://livedocs.adobe.com/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/JS_API_AcroJS.88.528.html
You can then export the file with the doc.exportDataObject method:
http://livedocs.adobe.com/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/JS_API_AcroJS.88.463.html
This won't work with Reader if it hasn't been given the file attachment usage right with LiveCycle Reader Extensions.

Generating multiple text files.

Dose anyone know how to output multiple text files using XSLT.

Dear Rony,
I am facing the same problem, have u got the sollution. if u resoled please let me know.
requesting you
Thanks&Regards
Srini

How can I add a "Create New Text File" contextual menu?

Hi,
I'd like to add a "Create New Text File" contextual item. I found the "new text file" action in Automator, but I don't really know where to go from there... I want it to work on the desktop and in finder...
Thanks

See:
Mac OS X Automation,
Automated Workflow Tips,
Introduction to Automator tutorial, and
a four-parter on Automation in Snow Leopard by Sal Saghoian:
Snow Leopard Services,
Services for iPhoto,
Safari and WebKit integration, and
Installing and using services.
Finally,
Developing AppleScript Applications and
Apple's Automator Developer Documentation

Creating a text file

hi
can anyone tell me how to create a number of text file using a different variable in java.the exact definition is like this "different variables are stored in a text file and each time it has to open this file, take these as their file name and create a text file"

new File(thevariable)

Use splitter to create multiple text file

Similar Messages

Maybe you are looking for