Use Standby DB instead of Primary DB
Hi,
I've a plan let's assume Data Guard has been set successfully with the following condition:
Primary:
DB_NAME=DB1
DB_UNIQUE_NAME=DB1
Secondary:
DB_NAME=DB1
DB_UNIQUE_NAME=DB2
After a couple of days, I switchover DB2 become primary and DB1 is secondary. Then I want completely use DB2 as single instance, throw away DB1.
It's mean DB_NAME and DB_UNIQUE_NAME will be different like this:
Primary:
DB_NAME=DB1
DB_UNIQUE_NAME=DB2
Later I want reconfigure Data Guard with the new standby DB, called DB3.
Since this DB is not 'pure' primary and DB_NAME is different with DB_UNIQUE_NAME, is it okay for this database go production as primary ?
Need your advice please,
Oracle version : 11gR2 for AIX 6.1 (64bit)
Thank you,
Yusata.
Edited by: Yusata on Jan 17, 2012 11:29 PM
Yusata wrote:
Later I want reconfigure Data Guard with the new standby DB, called DB3.
Since this DB is not 'pure' primary and DB_NAME is different with DB_UNIQUE_NAME, is it okay for this database go production as primary ?Why do you consider as not pure primary? After switchover this is normal primary database.
You may set DB_NAME=TEST, at 1st instance db_unique_name=test_inst1, at 2nd - db_unique_name=test_inst2, for example.
Normally both db are equal, they just switch their roles.
Similar Messages
-
Recovering primary using standby database
Hi all,
Here we have a dataguard environment with db1(db_unique_name) as primary and db2(db_unique_name) as physical standby database. We configured dataguard in 10g environments and we are not using grid control. And now we want to configure rman for incremental backups.After configuring we successfully took full backup in standby plus archive logs. Then as the test case we dropped one datafile from the primary and tried to recover it. It is showing the following error. Also when i tried 'crosscheck backup' from primary it is showing that all the backups taken in standby are 'expired'. But from RMAN connected to standby the same backups are showing as 'available'. Can anyone help to fix this?
On primary:
[oracle@db1 NIOS]$ sqlplus / as sysdba;
SQL*Plus: Release 10.2.0.3.0 - Production on Thu Sep 6 02:58:11 2012
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> alter database datafile 4 offline; (after deleting datafile from system level)
Database altered.
[oracle@db1 NIOS]$ rman target sys/oracle@db1 catalog rman/oracle@appsdb
Recovery Manager: Release 10.2.0.3.0 - Production on Thu Sep 6 02:58:58 2012
Copyright (c) 1982, 2005, Oracle. All rights reserved.
connected to target database: NIOS (DBID=1590630518)
connected to recovery catalog database
RMAN> restore datafile 4;
Starting restore at 06-SEP-12
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=107 devtype=DISK
channel ORA_DISK_1: starting datafile backupset restore
channel ORA_DISK_1: specifying datafile(s) to restore from backup set
restoring datafile 00004 to /u01/app/oracle/oradata/NIOS/users01.dbf
channel ORA_DISK_1: reading from backup piece /u01/app/oracle/flash_recovery_area/DB2/backupset/2012_09_05/o1_mf_nnndf_TAG20120905T174801_84gjqt0n_.bkp
ORA-19870: error reading backup piece /u01/app/oracle/flash_recovery_area/DB2/backupset/2012_09_05/o1_mf_nnndf_TAG20120905T174801_84gjqt0n_.bkp
ORA-19505: failed to identify file "/u01/app/oracle/flash_recovery_area/DB2/backupset/2012_09_05/o1_mf_nnndf_TAG20120905T174801_84gjqt0n_.bkp"
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
failover to previous backup
channel ORA_DISK_1: starting datafile backupset restore
channel ORA_DISK_1: specifying datafile(s) to restore from backup set
restoring datafile 00004 to /u01/app/oracle/oradata/NIOS/users01.dbf
channel ORA_DISK_1: reading from backup piece /u01/app/oracle/flash_recovery_area/DB2/backupset/2012_09_05/o1_mf_nnndf_TAG20120905T164212_84gdwdst_.bkp
ORA-19870: error reading backup piece /u01/app/oracle/flash_recovery_area/DB2/backupset/2012_09_05/o1_mf_nnndf_TAG20120905T164212_84gdwdst_.bkp
ORA-19505: failed to identify file "/u01/app/oracle/flash_recovery_area/DB2/backupset/2012_09_05/o1_mf_nnndf_TAG20120905T164212_84gdwdst_.bkp"
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
failover to previous backup
channel ORA_DISK_1: restoring datafile 00004
input datafile copy recid=13 stamp=793208425 filename=/tmp/users01.dbf
destination for restore of datafile 00004: /u01/app/oracle/oradata/NIOS/users01.dbf
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 09/06/2012 02:59:10
ORA-19571: datafilecopy recid 13 stamp 793208425 not found in control file
ORA-19600: input file is datafile-copy 13 ()
ORA-19601: output file is datafile-copy 0 (/u01/app/oracle/oradata/NIOS/users01.dbf)
RMAN> crosscheck backup;
using channel ORA_DISK_1
crosschecked backup piece: found to be 'EXPIRED'
backup piece handle=/u01/app/oracle/flash_recovery_area/DB2/backupset/2012_09_05/o1_mf_annnn_TAG20120905T164038_84gdsjlw_.bkp recid=18 stamp=793212040
crosschecked backup piece: found to be 'EXPIRED'
backup piece handle=/u01/app/oracle/flash_recovery_area/DB2/backupset/2012_09_05/o1_mf_annnn_TAG20120905T164038_84gdtz6p_.bkp recid=19 stamp=793212087
crosschecked backup piece: found to be 'EXPIRED'
backup piece handle=/u01/app/oracle/flash_recovery_area/DB2/backupset/2012_09_05/o1_mf_nnndf_TAG20120905T164212_84gdwdst_.bkp recid=20 stamp=793212132
crosschecked backup piece: found to be 'EXPIRED'
backup piece handle=/u01/app/oracle/flash_recovery_area/DB2/autobackup/2012_09_05/o1_mf_s_793242038_84gdxw5j_.bkp recid=21 stamp=793212180
crosschecked backup piece: found to be 'EXPIRED'
backup piece handle=/u01/app/oracle/flash_recovery_area/DB2/backupset/2012_09_05/o1_mf_annnn_TAG20120905T174759_84gjqrtn_.bkp recid=22 stamp=793216080
crosschecked backup piece: found to be 'EXPIRED'
backup piece handle=/u01/app/oracle/flash_recovery_area/DB2/backupset/2012_09_05/o1_mf_nnndf_TAG20120905T174801_84gjqt0n_.bkp recid=23 stamp=793216082
crosschecked backup piece: found to be 'EXPIRED'
backup piece handle=/u01/app/oracle/flash_recovery_area/DB2/autobackup/2012_09_05/o1_mf_s_793246288_84gjs9h4_.bkp recid=24 stamp=793216129
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=/u01/app/oracle/product/10.2.0/db_1/dbs/c-1590630518-20120906-00 recid=5 stamp=793238431
Crosschecked 8 objects
On Stand-by:
[oracle@db2 NIOS]$ rman target sys/oracle@db2 catalog rman/oracle@appsdb
Recovery Manager: Release 10.2.0.3.0 - Production on Wed Sep 5 20:11:58 2012
Copyright (c) 1982, 2005, Oracle. All rights reserved.
connected to target database: NIOS (DBID=1590630518, not open)
connected to recovery catalog database
RMAN> crosscheck backup;
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=91 devtype=DISK
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=/u01/app/oracle/flash_recovery_area/DB2/backupset/2012_09_05/o1_mf_annnn_TAG20120905T164038_84gdsjlw_.bkp recid=18 stamp=793212040
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=/u01/app/oracle/flash_recovery_area/DB2/backupset/2012_09_05/o1_mf_annnn_TAG20120905T164038_84gdtz6p_.bkp recid=19 stamp=793212087
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=/u01/app/oracle/flash_recovery_area/DB2/backupset/2012_09_05/o1_mf_nnndf_TAG20120905T164212_84gdwdst_.bkp recid=20 stamp=793212132
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=/u01/app/oracle/flash_recovery_area/DB2/autobackup/2012_09_05/o1_mf_s_793242038_84gdxw5j_.bkp recid=21 stamp=793212180
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=/u01/app/oracle/flash_recovery_area/DB2/backupset/2012_09_05/o1_mf_annnn_TAG20120905T174759_84gjqrtn_.bkp recid=22 stamp=793216080
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=/u01/app/oracle/flash_recovery_area/DB2/backupset/2012_09_05/o1_mf_nnndf_TAG20120905T174801_84gjqt0n_.bkp recid=23 stamp=793216082
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=/u01/app/oracle/flash_recovery_area/DB2/autobackup/2012_09_05/o1_mf_s_793246288_84gjs9h4_.bkp recid=24 stamp=793216129
crosschecked backup piece: found to be 'EXPIRED'
backup piece handle=/u01/app/oracle/product/10.2.0/db_1/dbs/c-1590630518-20120906-00 recid=5 stamp=793238431
Crosschecked 8 objects
Thanks in advance.Hello;
I would review one of these step by step :
Using RMAN Backup Files from Standby Database to Recover Primary
http://oraganism.files.wordpress.com/2009/04/backup-from-physical-standby.pdf
How to use standby backup to restore primary db
http://alexzeng.wordpress.com/2008/09/13/how-to-use-standby-backup-to-restore-primary-db/
Steps to recover the primary database's datafile using a copy of a standby database's datafile.
http://dbaregistry.blogspot.com/2010/01/steps-to-recover-primary-databases.html
RMAN in a Data Guard Environment
http://oracle.su/docs/11g/backup.112/e10642/rcmarchi.htm#CHDIFGFH
Performing a database clone using a Data Guard physical standby database
http://gavinsoorma.com/2012/04/performing-a-database-clone-using-a-data-guard-physical-standby-database/
Best Regards
mseberg -
Use standby-database as standby-database after creating primary database
First I will tell what we have and what I did.
We have a standby database on server B that was not started. We did a cold copy to server A and opened the database on server A as primary database. Now we wonder if we can use the standby database on server B to apply archives without creating a new copy to server B. The standby database on server B is waiting for sequence 2900, while the database on server A started with a new sequence.
Is it possible somehow to start the recovery again on the standby databsae on server B without creating a new copy?
Forgot to mention: db-version is 9.2.0.7.0, OS is SunOS 5.10Writing seperate code is not needed, Oracle will copy the files if the log_archive_dest is set to the right value.
However, it is solved!
What I did:
- create standby controlfile on the primary
- copy standby controlfile to standby database
- on standby: startup nomount / alter database mount standby database
- on primary: set log_archive_dest_2 to trigger the copying of archivelogs to the standby
Right now the standby database is recovering. -
Why do we need standby redo log on Primary database.
Hi Gurus,
I was going through the document in OBE,
http://www.oracle.com/technology/obe/11gr1_db/ha/dataguard/physstby/physstdby.htm
I have two queries:
1) I noticed the statement -
"Configure the primary database to receive redo data, by adding the standby logfiles to the primary. "
Why do we have to create standby redo log on a primary database?
2) There is another statement --
"It is highly recommended that you have one more standby redo log group than you have online redo log groups as the primary database. The files must be the same size or larger than the primary database’s online redo logs. "
Why do we need one additional standby redo log group than in Primary database.
Could anyone please explain to me in simple words.
Thanks
Cherrish VaidiyanHi,
1. Standby redo logs are used only when the database_role is standby, it is recommended to be added in primary also so that they can be used on role reversal, however during normal working standby redo logs will not be used at all on primary.
2. In case of 3 online redo log groups, it is recommended to use 4 standby redo log group this is in case if log switching is happening frequently on primary and all 3 standby redo logs are still not completely archived on the standby and 4th can be used here as there will be some delay on standby due to network or slowness of arch on standby.
Use of the standby redo log groups depends on the redo generation rate, you can see only 2 standby redo logs are getting used while you have 4 standby redo log groups, when the redo generation rate is less.
So it is recommended to have one more standby redo log group when redo generation rate is high and all of the existing standby redo log group are getting used.
Regards
Anudeep -
Query regarding standby database state when primary is down or un-reachable
Hi
I want to know if there is any reflection on the standby database states when it's primary is down or not reachable? I want to use this information from standby node to determine if I can programatically execute (dgmgrl) failover operation or not? This is considering that the broker configuration has no fast-startfailover and no observer enabled/configured.
Thanks,
Yojana989192 wrote:
Hi
I want to know if there is any reflection on the standby database states when it's primary is down or not reachable? I want to use this information from standby node to determine if I can programatically execute (dgmgrl) failover operation or not? This is considering that the broker configuration has no fast-startfailover and no observer enabled/configured.
Thanks,
YojanaYou don't have exactly such option,
But you have alternate for it. Whenever standby is unreachable to primary then from standby alert log file you can see informational messages as RFS: Possible network disconnect with primary database , So you can write a script to grep those contents and to mail alert, so that you can sense whether any issue with primary database.
HTH. -
Adhoc Reporting using Data Sources instead of Report Model
Hi Gurus,
I'm working on SSRS 2008. I'm trying to create Adhoc Report using Report Builder 3.0. To select Data Source, both *.rsds and *.smdl are listed. I selected a Data Source which points to a SQL database. When I add New datasets, I'm able to add the fields and
it automatically detect relationships (Joins) using Primary Key and Foreign Key defined in the tables. I'm also able to edit the query. I ran the report and it ran successfully.
My question is I couldn't find any documentation regarding using Data Source for Adhoc Reporting. MS SQL documentation and forums insists that Report Model is required for Adhoc Reporting.
Please let me know if someone tried to create Adhoc Report using Data Source instead of Report Model. While I understand there are more benefits using Report Model (define entities/attributes, show/hide entity/attributes, organize entities/attributes etc.),
I just want to know if this is possible.
Are there any known limitation using this method?
Thanks In Advance!Hi Ereswaran,
Yes, we can create ad hoc report using report using data source instead of Report Model. Ad hoc reports typically are used to answer a specific question at appoint in time, so consequently people don’t spend a lot of time arranging and formatting the data
in a precise way. Other report development tools are available in Reporting Services to support more sophisticated reporting requirements.
Using Report Builder, we can build a simple report that display data form a single data source as defined by a report model. This tool is most useful for business users who need access to information but lack the skills to write a SQL query. If we have full
experience of SQL query, of course we can use data source instead of Report Model.
If you have any questions, please feel free to ask.
Regards,
Charlie Liao
Charlie Liao
TechNet Community Support -
How to sync the standby database with the primary?
Hi..We have dataguard setup for our production databases(10.2.0.3).
I need one clarification regarding the standby database sync with primary.We identified one of our databases is not in sync with the primary and for longtime the archives are not getting applied at the secondary.
We decided to take the incremental (from SCN)backup from primary and use that at the standby to resolve the gap as described in the book "Oracle dataguard concepts and administration".
But, before doing that,we observed couple of structural changes were not applied at the standby(ex:some tablespaces were not created in secondary where as they were there in primary).
How to apply these changes at the secondary as the standby is in mount state.(Can I open this database and create those tablespaces ?? or do you suggest any other way.
Thanks for your reply.This points to a setup problem. Something missing, a parameter set wrong etc.
While your question is asking something different - How to correct, I would consider how to prevent. Unless you have a gap or logs not applied you have a deeper issue.
If you have a gap or logs not applied then correct it and check to see if the missing object are present.
The key parameters for Oracle 10 are :
FAL_SERVER=STANDBY
FAL_CLIENT=PRIMARY
STANDBY_FILE_MANAGEMENT=AUTO
DB_FILE_NAME_CONVERT='STANDBY','PRIMARY'
LOG_FILE_NAME_CONVERT='STANDBY','PRIMARY'
log_archive_dest_1='LOCATION=/u01/app/oracle/oradata/PRIMARY/archive VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=PRIMARY'
log_archive_dest_2='SERVICE=STANDBY LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=STANDBY'
LOG_ARCHIVE_DEST_STATE_1=ENABLE
LOG_ARCHIVE_DEST_STATE_2=ENABLE
LOG_ARCHIVE_MAX_PROCESSES=30
Check them on both sides for issues.
If your standby is really trashed consider using RMAN to duplicate it. You might end up saving time. I have Oracle 11 short notes on this but it will work on Oracle 10 too.
http://www.visi.com/~mseberg/duprman.html
Otherwise use statements like this to resolve you gap.
ALTER DATABASE REGISTER LOGFILE '/u01/app/oracle/oradata/STANDBY/archive/PRIMARY_1_20_716110538.arc';
ALTER DATABASE REGISTER LOGFILE '/u01/app/oracle/oradata/STANDBY/archive/PRIMARY_1_21_716110538.arc';See Section 5.8 Managing Archive Gaps of oracle document B14239-05
Best Regards
mseberg
CKPT is correct, sorry I missed the Welcome to OTN!
Edited by: mseberg on Jul 5, 2011 10:34 AM -
Need for use Standby IP in ASA
Hi all,
when we config DHCP pool in ASA and config the VLAN and assign it IP address.
Why we use Standby IP ?How can Primary address fail if they are on same interface
Thanks
MaheshSo this secondary IP is on backup fw then?
Yes.
Does it mean that if Main Fw says powered off then if i ssh to fw then still i will see the same fw hostname?
Also then which vlan IP it will show under vlan ?
It will show same hostname and same vlan
if we have 2 fw in cluster and i log onto fw it shows info of only 1 fw is there a way i can get info of another fw in cluster
or i can login to backup fw?
You can log in to the backup or you can run commands from the primary unit but get the info from the secondary with the command:
failover exec standby show run
Remember to rate all of the helpful posts -
Using SAP PI instead of CRM Middleware
Hi experts,
Is it recommend to use SAP PI instead of SAP CRM Middleware.
If yes how can I do that.
I have read in forum requests that it can be implemented by using iDOC instead of BDocs.
I need a technical guideline how data (eg. Business Partner Data) can be tranferred from CRM to other ERP System.
Thank you for help.
Greetings
Mario
Edited by: Mario Bauer on Jun 22, 2010 9:24 AM
Edited by: Mario Bauer on Jun 22, 2010 9:28 AMHi!
SAP PI itself is a middleware Product but very roboust and capable enough to integrate any system to any other system, either it is SAP or Non-SAP. And there are two ways to integrate other ERP System to SAP CRM using SAP PI.
1. SAP PI will receive the message from back end ERP system & convert it to the XML format. SAP CRM receives the message using the Middleware XIF adaptor and convert the incoming XML Messages in the BDocs and the BDocs upload the data in the SAP-CRM Data base.
2. SAP PI will receive the message from back end ERP system & convert it to the XML format. SAP CRM receives the message and using the Functional Module convert the data into the BDocs and the BDocs upload the data in the SAPCRM Data base. In thsi situation, you need an expert ABAP Consultant to write the accurate functional Module.
The data inside the SAP_CRM System always transported in the BDocs not in Idocs. It is the BDocs data containers which transport the data from CRM Middleware to CRM Database and CRM Database upto CRM Middleware. -
How do I use openjpa2.0 instead of openjpa1.0
I use openjpa1.0 provider in weblogic10.3.4 before.
now I want use openjpa2.0 instead of openjpa1.0.
I according to this article (http://wiki.eclipse.org/EclipseLink/Development/JPA_2.0/weblogic#Problem_2:_JPA_2.0_persistence.xml_XSD_Enablement) to enable jpa2.0 .
but failed. it throws exception:
what do i do: seems an odd quirk of the EJB spec. The exception is:java.lang.AbstractMethodError: org.apache.openjpa.persistence.EntityManagerImpl.getMetamodel()Ljavax/persistence/metamodel/Metamodel;
at com.bea.core.repackaged.springframework.jee.intercept.MethodInvocationInvocationContext.proceed(MethodInvocationInvocationContext.java:111)
I try to delete openjpa1.0 jar file from modules directory.
the servier throws java.lang.NoClassDefFoundError org/apache/openjpa/conf/OpenJPAVersion
it seems the weblogic can't load the openjpa2.0 jar.
can somebody help me?Hi,
My page quoted above is mostly for older versions of WebLogic 10.3.3.0 and below that could not handle container managed JPA 2.0 injection. For WebLogic 10.3.5.0 and 10.3.4.0 JPA 2.0 is fully functional but will need to be enabled (the best way is to install OEPE, create a server profile to your WebLogic 10.3.4/10.3.4 instance - and select the "Java Persistence 2.0 - Install" link on the dialog in the Eclipse IDE). However, Kodo (based on OpenJPA) is not actively developed. I would switch to EclipseLink which is the Java EE 6 reference implementation. You can do this by changing the default persistence provider in the console from Kodo to TopLink (wraps EclipseLink) or specifying the provider in your persistence.xml.
The link you quote is the section for WebLogic 10.3.3.0
What you need is the new section I wrote in Jan 2011 for the 10.3.4.0
http://wiki.eclipse.org/EclipseLink/Development/JPA_2.0/weblogic#20110115:_JPA_2.0_using_EclipseLink_on_WebLogic_10.3.4.0
See my tutorials for details - where you can also see the source.
http://wiki.eclipse.org/EclipseLink/Examples/JPA/WebLogic_Web_Tutorial
http://wiki.eclipse.org/EclipseLink/Examples/Distributed
thank you
Michael O'Brien
http://www.eclipselink.org -
How to maintain Ztable using function module instead of SM30
Hi Friends,
please tell me , How to maintain Ztable or view using function module instead of SM30.
Thanks,
Veerendra.Hi,
You can design your report and use Function module VIEW_MAINTENANCE_CALL for that.
You need to use Action type as 'S' for displaying and 'U' for maintaining the table.
Ex:
CALL FUNCTION 'VIEW_MAINTENANCE_CALL'
EXPORTING
ACTION = 'S'
VIEW_NAME = 'Table Name'
EXCEPTIONS
CLIENT_REFERENCE = 1
FOREIGN_LOCK = 2
INVALID_ACTION = 3
NO_CLIENTINDEPENDENT_AUTH = 4
NO_DATABASE_FUNCTION = 5
NO_EDITOR_FUNCTION = 6
NO_SHOW_AUTH = 7
NO_TVDIR_ENTRY = 8
NO_UPD_AUTH = 9
ONLY_SHOW_ALLOWED = 10
SYSTEM_FAILURE = 11
UNKNOWN_FIELD_IN_DBA_SELLIST = 12
VIEW_NOT_FOUND = 13
OTHERS = 14.
Hope this helps.
Message was edited by: Imtiaz Ahmed -
I have 2 iCloud accounts. 3 devices use one of them as a primary account; my iPhone uses the other as a primary account so I can't stream photos from iPhone etc. What to do?
Sorry, yes indeed you can do that, I thought you wanted to keep the accounts the way they are now and also share photo stream between all devices, which of course is not possible.
In order to login to the account you are currently logged in to as a secondary account, as a primary account, and vice versa, you will need to delete both accounts from that device and then log back into them with the correct account as a primary (settings > iCloud) and the correct account as a secondary (settings > mail, contacts, calendars). -
I used to be able to display pdf documents using Adobe Reader instead of Firefox's built in. I have tried everything that you suggest and that Adobe suggest. I have uninstalled and reinstalled Firefox. I have uninstalled and reinstalled Adobe Reader (11.0.09). I have gone to the options in Mozilla but when I try to change the Portable Document settings, I don't get the option for "Use Adobe Acrobat (in Firefox)". I do get the for Adobe Forms, but not for PDF documents. If I change it to use Adobe Reader, it downloads and then opens reader which is not I want. I want to use the plugin which is installed (I go to Add-ons and it is installed and "always activate").
Help? This only started happening in the last month or so. I am running latest released Firefox (33.0.2), Windows 7 (up to date with all updates, etc.).That doesn't solve the problem. I have all those defaults. But in Firefox, it won't let me select for "Portable Document Format" to "Use Adobe Acrobat (in Firefox)" which it used to let me and which is what the Mozilla Firefox help stuff says to do. I can select Adobe Reader but then it downloads it and opens it in a separate reader window rather than using the plugin. If I select to let Firefox "Preview in Firefox", then the Firefox built-in PDF reader will display it. I have added an add-on "pdfViewerSwitcher" which then lets me display in the Adobe Reader plug-in but only after first displaying it in the Firefox preview. So that verifies that the Adobe Reader plug-in works. But I can't set it to always use the Adobe Reader plug-in.
I have some reasons for wanting to use the Adobe Reader plug-in. I use Nuance Power PDF Pro for editing and doing other things with pdfs.
This all used to work and stopped working at some point in the last couple months. And if you search the web, you will find I am not the only one with this complaint.
I don't know whether it is Adobe's fault or Mozilla's fault but at least one of them is broken. And I think it is Firefox since it won't even let me select it but does let me select it for Adobe Forms. -
I prefer using text only instead of text plus a folder icon in the bookmarks toolbar because it used less space and I can display more bookmark folders in that toolbar. Is that possible in Firefox 4.0? It was possible in the earlier versions of Firefox. If it is possible in Firefox 4.0 how do I do that? Thank you.
First install the "Stylish:" extension then you have thousands of styles available to choose from, most consist of only a few lines, and you can modify them to suit yourself.
* '''Stylish''' :: Add-ons for Firefox<br>https://addons.mozilla.org/firefox/addon/stylish/
* '''Bookmarks Toolbar Fx4 Blue/Folders, Red/Bookmarks'''<br>http://userstyles.org/styles/46947/
* '''some styles I use:'''<br>http://kb.mozillazine.org/User:Dmcritchie -
Using SQL Server instead of OLite
Has anyone had any luck with this? I am really not too familiar with the Oracle setup and due to experience, feel much more comfortable using SQL Server.
I read this thread where it talks about using other databases instead of Oracle Lite, but I can't seem to get it to work for SQL Server.
How to use a non-Oracle database?
I can get the ddl file to install and configure for SQL, but I'm having problems getting the JDBC connections to work in the data-sources.xml config file. Can anyone PLEASE... help me here? I've been screwing with this for a few hours, and haven't had much luck and I'm getting really frustrated. I downloaded the DataDirect JDBC drivers, but I'm not sure what I need to do with them in order to get this to work.
Thanks,
TCHi TC,
I circled back with the team. The only set of drivers that we currently support for Microsoft SQL Server are the DataDirect drivers. You should be able to download evaluation versions from their web site and their configuration doc do a good job of describing the configuration string you will need to use to set up the data source.
Let us know if it does not work as advertized.
I hope this helps.
Edwin
Maybe you are looking for
-
Photos go missing in iPhoto yet are still in library questions
So where did my chicken, dog, and frosty window photos go when they should still be in iPhoto? I can find them, tediously, in Library. Then, if I find photos in the library, what is the correct procedure to get them back into iPhoto from the Library?
-
Hey guys i cannot use the 'alt+ctrl+downarrow' shortcut key on Photoshop CS5.1 (64-bit). I'm running Windows 7 Home Premium on my HP laptop. If I press that, then the whole screen turs upside down! PLease HELP!!!
-
it starts up it closes with an error Crash ID: bp-a5b851c6-24e4-49b3-83fe-1edd42141125
-
DB Server: Oracle Linux 5.5 10.2.0.4.0 DB Version Application Server: Redhat EL 5.5 EBS 12.0.6 How does one figure out the version of "oracle configurator"? In a recent SR I was asked this question by Oracle support. Their method for me to find out w
-
SYST : Abnormal termaination (ANLB -LGJAN not equal to ANLC-GJAHR)
Hello all, i am getting the following error, when i am trying to post the park document. Message no : AA698 system response internal tables ANLB -LGJAN and ANLC-GJAHR of asset not synchnorize. i have checked the tables for these. Displayed Fields: