Use unused server as share point server after move databases to new server

HI,
we have a single server share point farm (ServerApp01) for Intranet and it connects to a SQL SERVER 2008 R2 database server (Server02),
and now we moved all sharepoint databases and content dbs to new sql server in different server (ServerSQLNew).
using sqlalias we point to new SQLSERVER 2012 Instance in this new server.
- now the old sql server (Server02), is not in the sharepoint farm
- now can i add this server in intranet farm and use this old server (Server02) as wfe server ?
here my doubt is when i open cliconfg.exe i saw that sharepoint server pointing to this old server name (Server02),
after i will join this server to existing farm is any issues?
adil

hi
i already turned off sql server instance in old sql server in my case in Server02.
In share
point Server (ServerApp01) i opened cliconfg.exe and add sqlaliases to point to new sql server.
If i rename server02 server or rebuild
the server with a clean OS install still Sharepoint Farm works right?
below is the scenario of sqlalias in sharepointserver (serverapp01)
adil

Similar Messages

Move database to new server

I hava Oracle 10.2.0.1.0 on Solaris 10.5 and wants to move it to Oracle 11.1.0.1.7 on same platform, but different server using exp/imp.
I am not aware of any other precondiction I need to meet before carrying on this exp/emp. If there is a precondition, I will appreciate if you can share it.
Does the database needs to shut down
Do I need to copy any files from old database
Here is my par file:
userid = system/****
file = /h/share/database/db/backups/CBEXP.dmp
log = /h/share/database/db/backups/CBEXP.log
statistics = none
full = y

You can do exp/imp if you have the same schema infrastructure and db objects at the target db. Otherwise you have to clone the database to the new target.
1. Create a new DB with DBCA at the target server
2. Shutdown the source and target databases
3. Do a cold backup (which means copying all datafiles to the target directory)
4. Startup the source db
5. Create a backup control file on the target db such as follows;
CREATE CONTROLFILE SET DATABASE "<SID_of_clone_database>" RESETLOGS
NOARCHIVELOG
-- SET STANDBY TO MAXIMIZE PERFORMANCE
MAXLOGFILES 5
MAXLOGMEMBERS 3
MAXDATAFILES 100
MAXINSTANCES 1
MAXLOGHISTORY 4991
LOGFILE
GROUP 1 'D:\Oracle\Oradata\NUNDQOL\REDO01.LOG' SIZE 100M,
GROUP 2 'D:\Oracle\Oradata\NUNDQOL\REDO02.LOG' SIZE 100M,
GROUP 3 'D:\Oracle\Oradata\NUNDQOL\REDO03.LOG' SIZE 100M
-- STANDBY LOGFILE
DATAFILE
'E:\oracle\oradata\NUNDQOL\SYSTEM01.DBF',
'E:\oracle\oradata\NUNDQOL\UNDOTBS01.DBF',
'E:\ORACLE\ORADATA\NUNDQOL\CWMLITE01.DBF',
'E:\oracle\oradata\NUNDQOL\DRSYS01.DBF',
'E:\ORACLE\ORADATA\NUNDQOL\ODM01.DBF',
'E:\oracle\oradata\NUNDQOL\NUNTQOL.DBF',
'E:\oracle\oradata\NUNDQOL\NUNTQOL_IAM.DBF',
'E:\oracle\oradata\NUNDQOL\INDX01.DBF',
'E:\oracle\oradata\NUNDQOL\TOOLS01.DBF',
'E:\oracle\oradata\NUNDQOL\USERS01.DBF',
'E:\oracle\oradata\NUNDQOL\XDB01.DBF';
6. STARTUP NOMOUNT of the target database
7. execute the backup control file
8. RECOVER DATABASE UNTIL CANCEL USING BACKUP CONTROLFILE;
ALTER DATABASE OPEN RESETLOGS;

Break cluster and move databases to new server

Hello everyone. I have a question that may be basic but I am by no means a SQL person. Right now we have a SQL 2005 cluster running on VM ESXi with a celerra backend storage. Some drives are mapped Raw. We recently put in a new
VNX and we are not able to migrate the SQL server over due to how the drives are mapped. I am thinking that I want to build a new SQL server and move the databases. The new build will not be a cluster since we have point in time recovery manager
from EMC. Now my thinking is, can I break the cluster, move the 2nd node to the new ESXi and storage and present new storage or would it be best to just build a new server? Is it easy enough to change an instance name after SQL is running?
Several applications refer to the SQL Cluster and they are critical so I need something with least amount of downtime. Would doing backup of all of SQL and then a restore to the new system be best? Any thoughts or direction? Thanks
Joe M

The most straightforward and reliable method is to build a new server, migrate the databases using backup/restore, test the new server, and cut-over by shutting down the old servers and either reconfiguring the client applications or renaming the new server
to have the same network name as the old server's SQL Cluster Client Access point.
You can also use DNS redirection instead of renaming the new server, although using a DNS hostname alias for your server requires some additional security configuration. EG
http://blogs.msdn.com/b/dbrowne/archive/2012/05/21/how-to-add-a-hostname-alias-for-a-sql-server-instance.aspx
David
David
David http://blogs.msdn.com/b/dbrowne/

Move database to new server from ASM to FS

Hey, I have to move my database from ASM to filesystem storge (10.2.0.3 on sles 10 sp1)
The new server is also sles 10 sp1.
Can I just do an full export on the source site, and an import on the target site ? Will that work ?
Any other steps to perform ?
Chris

Hi,
1. Export db wlth FULL=Y . and then we have to create new database at target location and then import operation have to done.
2.we can take rman backup, restore rman backup in target location. This method will reduce the complexity
take backup through Rman.
Target location:-
1. export ORACLE_SID=xxx
2. rman target /
3. startup nomount
4.RMAN> RESTORE CONTROLFILE FROM 'backup piece';
5.RMAN> alter database mount;
6.
set newname for datafile '+DG/datafile.dbf' to 'FS/location';(do for all datafiles)
restore database;
switch datafile all;}
7. alter database rename file '+DG/datafile.dbf' to 'FS/location';(do for all datafiles)
8.alter database open;
follow these steps from ASM TO FS.
Edited by: startup on May 23, 2013 7:41 PM

Can I use Time Machine and an external HDD to move to a new mac?

I'm in the process of selling my MBP. I'm looking to buy a Mini with dual screens for a better photo editing experience. Here's the deal. I have to sell my laptop first, then I will use that money to buy the mini.
I have a portable 1TB HDD, I'm using Time Machine to back up my laptop. After my laptop is sold and I restore it.. Can I plug the portable HDD into my new mini and load the backup as if I didn't get a new computer?

omfgskyler wrote:
... Can I plug the portable HDD into my new mini and load the backup as if I didn't get a new computer?
See Pondini's Excellent information here...
Setting-up a new Mac from an old one, its backups, or a PC

FCPX will not open after move to a new Mac'

I've just invested in a "new" 2010 MacPro and transferred everything from my 27" iMac, ( same year vintage ), to the MacPro using Carbon Copy Cloner to a new 2tb Hard Drive, installed that drive into the MacPro as it's Start Up drive and everything opens up and works just fine on the "new" machine……..except for FCPX.
While it's not my favourite editing programme by quite a margin I still want to have it usable so I can maybe learn to like it down the road after I am forced to give up FCP Studio 7.
However now it's installed on the MacPro it will not open beyond the FCPX splash screen, it crashes and asks if I want to send a report to Apple.
I've un-installed it from the MacPro and re-downloaded and re-installed a new version to see if that would help, but it didn't. Same thing happens, it crashes before it opens right after the splash screen shows up.
The MacPro' is running the same OSX 10.8.5 as previously in the 27" iMac, no other changes apart from the machine switch and everything else that was cloned over is working fine.
Maybe I've missed something that needs to be deleted from the Mac Pro before FCPX will run in it's new "home", but I can't figure out if that's the case.
Any clues would be welcome…..Thanks!

Hello Tom, thanks for the very swift response!
Yes I know that the recent versions of FCPX will not run on 10.8.5, I was running the earlier version on the iMac ( 10.0.9 ) and that's the version that was Carbon Copied over with the rest of the iMac's drive to the "new" MacPro's start up drive.
When I found it wouldn't work I re-downloaded FCPX from the App store and got the message asking me if I'd like to install an earlier version of the App because the recent one wouldn't run on OSX10.8.5, I click "yes" and an "new" FCPX 10.0.9 was downloaded. However that still will not load beyond the splash screen. So something is upsetting it somewhere.
I do have FCP 7 Studio in a separate folder in Applications labelled "FCP 7 Studio Folder", this was as it was on the iMac and run both FCP's without any conflict or problems.
Odd huh?
PS. FCPX still opens ok on the iMac…..

Using Apple TV/Airplay for a full screen movie and opening new window on laptop

When I have a full screen movie playing on my TV in AirPlay dual screen mode, and I open a new Safari window or my Mail, the window appears seemingly by default on top of the movie rather than coming up on my laptop monitor. Is there a spot I can reset the default for new Safari windows and Mail windows to my laptop monitor, so they don't interrupt the movie on my TV?
Background: my girls love Downton Abbey and Call the Midwife which I find terribly boring, and need to find something to do while the movies are playing rather than fall asleep! And you know what happens if Safari shows up over top of their beloved Downton!

it being mirror and many tv's being widescreen 16:9 and the screen of ios device not being widescreen this happen
most tv's support having top and button chopped or streghed to fill the tv this is something one does with the tv's remote

How to get list data and bind to data table or Grid view in share point 2010 using j query

hi,
How to bind list data in to data table or grid view using Sp Services.
How to use sp services in share point 2010 lists and document library

Hi, You can use List service, SPServices and JQuery to get your requiement done-
See here for an sample implementation -
http://sympmarc.com/2013/02/26/spservices-stories-10-jqgrid-implementation-using-spservices-in-sharepoint/
http://www.codeproject.com/Articles/343934/jqGrid-Implementation-using-SpServices-in-SharePoi
Mark (creator of SPServices) has some good documentation on how to use SPServices-
http://spservices.codeplex.com/wikipage?title=%24().SPServices
SPServices Stories #7 – Example Uses of SPServices, JavaScript and SharePoint
http://sympmarc.com/2013/02/15/spservices-stories-7-example-uses-of-spservices-javascript-and-sharepoint/
Hope this helps!
Ram - SharePoint Architect
Blog - SharePointDeveloper.in
Please vote or mark your question answered, if my reply helps you

MOVE REPLICATION DATABASE TO NEW SERVER

WE HAVE A PRODUCTION DATABASE THAT WORK'S AS REPLICATION FROM 9 DATABASES, WE ARE GOING TO MOVE DATABASE TO NEW SERVER.
AS DATABASE IS PRODUCTION, WE CAN NOT STOP SERVICES. WE THINK TO CREATE A NEW DATABASE ON NEW SERVER, IMPORT DATA FROM PROD. DATABASE. SIZE APROX 100GB.
QUESTION:
I NEED TO KNOW HOW I CAN STOP SERVICES SHORT TIME. TO CHANGE TO SNEW SERVER.
THANKS FOR YOUR SUGGESTIONS

Здравствуте Ivan.
Before i would do anything like this i would make sure that i have a good valid backup (just in case!).
I would check all the applications that are currently conencting to your ORacle and make sure they are all conneting 'by name' not the IP. Or and then i would check DNS server (make sure nslookup is working) to makesure that everything resolves correctly after the moving DB to another machine.
Then check that the oracle_home etc are in the same directory and check that all paths etc in the configurations are the same.
Hope this helps
Kind Regards

Can't mount share points over VPN after moving server

I'm tearing my hair out over this one. We have a server that was located in our office. I just moved it downtown to a colo center (no longer in office) and set up VPN access.
However, nobody is able to mount the server share points, even though the connection to the VPN seems to work fine (e.g.: I choose "connect to L2TP..." and it connects, VPN icon shows I am online with the server).
Any attempt to mount a share point fails. I've tried using afp://servername.com and I've tried afp://64.xx.xx.xx (where that's the machine's public IP address). Am I supposed to use a different address (such as an internal 192 address that works over the VPN) or should I be able to mount the afp point using the server public domain name? Should I try NFS?
Any help would be appreciated -- really need to get access to this system's files again! Thank you!

Morris Zwick wrote:
And does anyone know which IP you enter for your sites in the web service? The public static IP or the internal private static IP?
For the external DNS server I am sure you have already deduced that it should be the static IP issued you by Comcast and this will be forwarded by your router to your server.
For your internal DNS server you could use either the internal LAN IP, or the external IP although the later might be affected by your firewall so this you will need to test.
For the Web Server service in Server admin, if your only running a single website you could avoid the issue by just using the wildcard entry which will respond to any IP address, so this would be an empty host name and an IP address of *
In fact you don't have to specify an IP address you could just use the hostname, so it will listen to traffic arriving at your server addressed to any IP address and as long as the URL that was requested includes the hostname you define for the site it will get responded to. So if as an example you have two websites you want to serve
www.example.com
site2.example.com
then as long as both have the IP address for the site as an * (asterisk) then both should work as separate sites for traffic addressed to either the LAN or WAN IP address of the server.
You will still need to use two IP addresses on the server to enable VPN, you could use a USB Ethernet adapter for the second one. Port forwarding for VPN is not as simple as other traffic as VPN requires traffic different to the standard IP and UDP packets. Routers that support 'VPN Passthrough' are specifically designed to accomodate this but I don't know if the AirPort Extreme does this. I have also found PPTP copes better with this sort of setup than L2TP although PPTP is generally regarded as less secure.

How to configure SharePoint HNSC with a reverse proxy server so that HNSC Share Point URLs are not exposed to end users.

Could you please let me know how SharePoint HNSC can be configured with a reverse proxy server so that HNSC Share Point URLs are not exposed to end users.
In normal path based site collections/web applications, reverse proxy configuration can be done using alternate access mappings with Public URL = "proxy URL", internal = "HNSC Share Point URL" so that share point sends response back
to Public URL = "proxy URL".
In Host Named Site Collections, alternate access mappings are not supported. Each HNSC is designed to have only one URL in each zone. Zone is one of the five zones(Default,Intranet,Internet,Custom,Extranet) with each of which only one alternate
URL is associated. This is what we are able to get using power shell command "Set-SPSiteUrl", but this will not help us to get the response back to proxy URL after a request sent to share point because we could not find any mechanism in share
point HNSC to respond to a different URL(proxy URL). Consequently, Share Point URLs are exposed to external users.
Below share point article in MSDN blog is symmetrical to what we are observing with Share Point 2013 and Proxy Server. It mentions that internal HNSC URLs can’t be hidden using any proxy server. If hiding the internal Share Point URLS is a requirement,
it suggests to use a web application instead of host named site collections.
Though I’m also observing the same behavior with Share Point 2013 HNSC, Could you please confirm my understanding is correct.
http://blogs.msdn.com/b/kaevans/archive/2012/03/27/what-every-sharepoint-admin-needs-to-know-about-host-named-site-collections.aspx
Excerpt from above article-
"Host Named Site Collections Only Use One Host Name
Continuing on the discussion on AAMs and host named site collections, you cannot use multiple host names to address a site collection in SharePoint 2010. Because host-named site collections have a single URL, they do not support alternate access mappings and
are always considered to be in the Default zone. This is important if you are using a reverse proxy to provide access to external users. Products like Unified Access Gateway 2010 allow external users to authenticate to your gateway and access a site
as http://uag.sharepoint.com and forward the call to http://portal.sharepoint.com. Remember that URL rewriting is not permitted. Further, a site collection can only respond to one host name. This means if you are using a reverse proxy, it must forward the
calls to the same URL. If your networking team has a policy against exposing internal URLs externally, you must instead use web applications and extend the web application using an alternate access mapping."<u5:p></u5:p>

Hi Satish,
You are right that only one URL is allowed for each zone of the host-name site collections in both SharePoint 2010 and SharePoint 2013.
It is by design that each host-name site collection only support one URL for each zone.
The article below is about RTM version of SharePoint, and it is the same for SharePoint 2013 with the latest CU.
https://support.microsoft.com/en-us/kb/2826457
So to make the URL of HNSC not exposed to external users is not supported, you need to use path-based sites instead.
Best regards.
Thanks
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Drill through reports are not working fine in share point server

I Have a master report with four parameters and child report with two parameters
I deployed these two reports in share point server , my scenario is i am navigating from my parent report to child report using action (Drill Through Report Concept)
First i clicked on parent report it will ask select parameters , i have selected all parameter and click on apply in share point it will display the parent report content .
In parent report i have link to navigate child report . if i click the link it will redirect to child report and displays the child report content perfectly. upto this step every thing working fine now problem is comes to picture
I have back to in my child report when i click the that button it redirects from child to parent
But earlier selected parameters values are lossed and the parent report again asked for me to select parameters
Can you please explain me because we have migratiojn from ssrs report manager to share point .

Hi All,
Finally i got the solution there is small difference between SSRS Native mode and share point integrated mode
To overcome this issue explicitly we have to change our report expression code for SharePoint Integration mode before deployment. We have to change URL
Preparation code in the expression in report.
Below is the sample URL
="http://<<site url>>/ReportServer/RSViewerPage.aspx?rv:RelativeReportUrl"+"=/ssrs/INT/Report.rdl&rp:parameter1="+CStr(Parameters!parameter1.Value)+"&rp:parameter2="+CStr(Parameters!parameter2.Value)+"&rc:Parameters=True"
The only difference between our SSRS Report manager report expression and share point integrated mode report expression is
“rp:”
value prefixed with every parameter.
After fixing this code I am able to see the previously selected values in Parent report below are the screen shots

Sharepoint server get all Updates except share point Updates

hi
I have a sharepoint server that sharepoint 2013 has installed on that .my Update server is sccm 2012 r2 and I checked all office 2003,2007,2010,2013 product to be synchronized .every thing is good sccm work fine in synchronizing update with Microsoft.and the
share point server OS gets Updates finely .But the Problem is here that share point service doesn't get any updates .all updates deployed to OS except share Point updates.
whats the solution ?
thanx

I checked those files .but there weren't any errors .I checked them through reporting but it still says that those
Updates are not required whereas the server doesn't installed any share point Updates.
http://support2.microsoft.com/kb/2767999
A change in the package configuration was introduced after SharePoint Server 2013 was released. You must install this public update before you install later SharePoint updates.
Note This update is available only from the Download Center and is currently not available from Microsoft Update.
https://www.microsoft.com/en-us/download/details.aspx?id=36989
Due to a change in the package configuration introduced after SharePoint 2013 RTM the March Public update is a mandatory requirement in order to install subsequent SharePoint Updates.
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)
thanks for reply
But before I've got another share point server 2013 and wsus server (not sccm) .that was ok with all Updates .
I didnt do any thing special in that case.like installing some hotfixes or anything else.

Is it possible to share an aperture library with different users using osx server.

is it possible to share an aperture library with different users using osx server.

Not really. You should not be sharing an Aperture library over a network. It's not designed for that and you'll likely corrupt your library at some point.

Mobile Account - How to Map Share Point Locally on Server?

Hello,
Using mobile accounts on a mac mini server, this is a small home network. Primary reason for server was to use mobile accounts allow the various computers and laptops to be accessed by all family and guests with data linked to login.
All work fine except, when I login into the server as my mobile account it is unable to sync, or find any files because the Share Points do not map locally. Warning message says use locally. This causes problems with itunes, mobile account syncs etc.
Is there a way to map the Share Points using the network path, locally on the server in the mobile accounts?
Thanks
Peter

You need to convert the project to sharepoint 2013, you have to change the target office version 15.0 and target framework versions to 4.0 or 4.5. For more details go throught the below posts
http://www.codeproject.com/Articles/522220/Converting-Multiple-SharePoint-2010-Projects-to-Sh
http://social.msdn.microsoft.com/Forums/en-US/c15f274c-1dfe-47cc-b753-883307fc354f/migrate-sharepoint-2010-visual-webpart-to-sharepoint-2013-using-visual-studio-2012
http://sharepoint.stackexchange.com/questions/58377/upgrade-a-vs-2012-sharepoint-2010-project-to-sharepoint-2013
Raghavendra Shanbhag | Blog: www.SharePointColumn.com
Please click "Propose As Answer " if a post solves your problem or "Vote As Helpful" if a post has been useful to you.
Disclaimer: This posting is provided "AS IS" with no warranties.

Use unused server as share point server after move databases to new server

Similar Messages

Maybe you are looking for