Used to have ios 7 betaon my i phone and downgraded to ios 6 so i can upgrade to the official ios 7 but i lost my pc back ups. Please help me

Used to have ios 7 betaon my i phone and downgraded to ios 6 so i can upgrade to the official ios 7 but i lost my pc back ups. Please help me

First off, Apple doesn't support downgrading and it can potentially brick your phone. With that being said, if you created a back up in iOS 7 Beta and are trying to restore it to iOS6, you wont be able to. You need to upgrade first then restore from your backup. Don't be suprised if it doesn't work. There is a very real possibilty you may have to start from scratch.

Similar Messages

  • My ipod touch(4th gen) just recently had the iOS 5 update.bu for some reason about 80% of my music collection appears with no album artwork and doesnt play any songs.basically it has my music on their but wont let me access it? please help!

    My ipod touch(4th gen) just recently had the iOS 5 update.bu for some reason about 80% of my music collection appears with no album artwork and doesnt play any songs.basically it has my music on their but wont let me access it? please help!

    i have the same problem but i have ios 5.01. how do you unsync? please help, thanks

  • I have 2010 macbook white 13 inch and need a replacement battery - where can i find the specs needed for the replacement?

    I have 2010 macbook white 13 inch and need a replacement battery - where can i find the specs needed for the replacement?

    The model 6,1 Late 2009 and the model 7,1 Mid 2010 use an A1331 battery. You can replace it yourself or have Apple do it for you for $129. If you need it quickly make sure you order it from a U. S. seller. Orders from China can take two or three weeks.
    http://www.ebay.com/sch/i.html?_nkw=macbook++battery+a1331&_sacat=0&_odkw=macboo k++battery+a1342&_sop=12&_osacat=0
    Here's installation instructions. You'll need a Tri Wing Y1 screwdriver in addition to the usual #00 Phillips screwdriver.
    http://www.ifixit.com/Guide/Installing-MacBook-Unibody-Model-A1342-Battery/1667/ 1

  • I have Mac OS 10.6.8 and Safari 5.1.10. Can I update the OS and the browser?

    I have Mac OS 10.6.8 and Safari 5.1.10. Can I update the OS and the browser?
    thanks for your help

    Safari 5.1.10 is the latest version for OS X 10.6.8.
    If you meet the minimum requirements, you can upgrade to OS X 10.9 (Mavericks) for free. Mavericks comes with Safari 7
    To install Mavericks, you need one of these Macs:
    iMac (Mid-2007 or later)
    MacBook (13-inch Aluminum, Late 2008), (13-inch, Early 2009 or later)
    MacBook Pro (13-inch, Mid-2009 or later),
    MacBook Pro (15-inch or 17-inch, Mid/Late 2007 or later)
    MacBook Air (Late 2008 or later)
    Mac mini (Early 2009 or later)
    Mac Pro (Early 2008 or later)
    Xserve (Early 2009)
    Your Mac also needs:
    OS X Mountain Lion, Lion, or Snow Leopard v10.6.8 already installed
    2 GB or more of memory
    8 GB or more of available space

  • I recently purchased a Canon 7D. I own Adobe Photoshop/Bridge CS5. I cannot open my raw images in Bridge. I have tried to download the plug in but does not seem to work. Please Help, I need to be able to open my raw images in Bridge ASAP. I do not want to

    I recently purchased a Canon 7D. I own Adobe Photoshop/Bridge CS5. I cannot open my raw images in Bridge. I have tried to download the plug in but does not seem to work. Please Help, I need to be able to open my raw images in Bridge ASAP. I do not want to upgrade to CS6 at this time.

    If you had given us sensible information, I could look it up for you if your efforts fail.
    Right now, I don't even know if you are on a Mac or on a Windows box.
    BOILERPLATE TEXT:
    If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Hi, i have a macbook pro and i want to update my iPhoto and iMovie will i be charged for the update and if i will how do i know if the update is free or I'm paying for it please help

    Hi, i have a macbook pro and i want to update my iPhoto and iMovie will i be charged for the update and if i will how do i know if the update is free or I'm paying for it please help

    Thank you soo much

  • HT4999 I have a new phone and a new computer.  Where can I find the downloads for the latest operating system files.  thanks

    I have a new I phone and a new computer.  I don't know where to get the download files for the lates operating system.

    To update iOS on an iPhone not running iOS 5 or later, connect the iPhone to iTunes and under the Summary tab for the iPhone sync preferences with iTunes, select Update. If there is an update avaiable, you should be prompted automatically.
    If the iPhone is running iOS 5 or later, the same applies along with another option which can be done direct with the iPhone.
    Would you like a link to the iPhone user guide where this is covered? Apple also includes a Safari bookmark with Safari on an iOS device for easy access to the user guide on the device.

  • I can not get Firefox to reset to normal size. I have tried everything including reinstalling it. Only some webpages like Facebook are large & it will not reset but in IE it is normal. Please help because I hate IE & really do not want to use it!

    When I open Facebook and a few other webpages the screen size is large and some of the info will not appear. I have tried everything to reset the size and it does not work. I have even zoomed out and the missing info still does not appear. But if I log into IE it is just fine and all the info is there and is useable. I hate IE and do not want to use it so please help me fix this issue with Firefox.

    CTRL+0 (<--that is a zero) will reset your zoom level on affected pages. Firefox remembers the zoom level you last used on a page.
    Built-in Zoom functions:
    *http://support.mozilla.com/en-US/kb/Page+Zoom
    *http://support.mozilla.com/en-US/kb/Text+Zoom
    Zoom Add-ons:
    *'''''Default FullZoom Level''''': https://addons.mozilla.org/en-US/firefox/addon/default-fullzoom-level/ '''''
    *'''''NoSquint''''': https://addons.mozilla.org/en-US/firefox/addon/nosquint/
    **More info on NoSquint: http://urandom.ca/nosquint/
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
    Not related to your question, but...
    You may need to update some plug-ins. Check your plug-ins and update as necessary:
    *Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
    *'''''Adobe Shockwave for Director Netscape plug-in''''': [https://support.mozilla.org/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
    *Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.org/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
    *Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.org/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
    *'''''Next Generation Java Plug-in for Mozilla browsers''''': [https://support.mozilla.org/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

  • I have just changed my password on googlemail on my computer and it has immediately locked me out of my emails on my phone and my new password now doesnt work either! i need to see my emails for work! someone please help!

    Please can someone help me?
    I have just changed my password on my work computer on gmail but my phonehas locked out of my emails now and will not accept my new password. it keeps telling me my username or password is incorrect. I have tried deleting entire email account and setting it up again but still doesnt work!
    Im out of options and step by step on apple is rubbish!!

    Ive also looked into other comments people have made about this and they are saying if you go into your account and go to incoming mail server you can change the password there but I cant find that anywhere. it only says outgoing mail server.
    could this be the problem? have i deleted this?

  • Firefox crashes after a few minutes when using say Ebay and Yahoo sites. Also internet exploer also does the same. I do not know much about computers please help if possible. Many thanks. PS I have the latest Firefox version

    The problem has just started. I did get a funny windows coming up about 'best video down loader' but I do have that addon already.

    I have too have lost all function to my smart mailboxes upon installing Yosemite. I also lost all my flagged email. Any solutions yet? I will be bummed if I have to recreate my email because I was foolish enough to install this upgrade too soon. Will I ever learn to wait? Ugh.

  • HT201365 I have brought a second hand phone and cant activate it because i can not seem to get in contact with the previous owner.

    I sold my iphone 4s and added some money to buy a second hand Iphone 5, i can't get into the phone because i need the previous owners apple Id and password and theres absolutely no way I can cintact the previous owner because i had thier number on my iphone 4s which was sold before i brought the 5.

    Only the previous owner can unlock your phone, either by providing you with the code or by removing it from his liste of devices. I'm afraid that if you cannot contact him your phone is useless.

  • My mac froze in an application so I shut it down by powering off with button, now when I try to turn it on I have a grey screen with Apple loge and the timer swirling but it doesn't get past this, please help!

    I Shut down my Mac by holding in the power button after my iMac froze and now when I try to turn it back it on all I get is the grey screen with Apple loge and the timer and doesn't get any further.  I have tried the diagnostic test but nothing was found.

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
    Step 1
    The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
    There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
    a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
    b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
    c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
    Step 3
    Sometimes a startup failure can be resolved by resetting the NVRAM.
    Step 4
    If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
    Step 5
    If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
    Step 6
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    Step 7
    If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
    Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
    If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
    If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 8
    Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
    Step 9
    If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.  
    Step 10
    Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 11
    Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
    Step 12
    This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
    Step 13
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

  • MBP 5.1 I have a recent problem with airport connectivity. ethernet connection is working fine, but wifi has become extremely slow and bad functioning. signal is received, no problem with the wlan (my husband 's wifi with MBP is perfect) please help

    I have a MBP 5.1 with snow leopard 10.6.8. It has been working fine until few days ago, when it started to have different problems:
    1) airport is not working well. it is extremely slow, has difficulties in fully loading pages, looses connectivity, It is not browser related, behaves thesame in safari or firefox; it is not the router/wlan; my husband mbp wifi works fine (as it was mine...) and iphone wifi is also working fine. it sees the signal and different networks. , it is also very very slow in opening skype (after that, it is working ok) if  I connect via ethernet cable to the same router, everything works perfectly and with the correct speed.could it be a damaged airport card? a software problem/corruption? logic board? (I hope not, the computer is out of apple care now....)
    2) after a certain time (more than hours) of use, the trackpad is behaving strangly, increase sensitivity to touch, unwanted selection of folders, files and text or images in web pages when i move the cursor, the cursor jumping all over the places while writing, ecc I have the impression it starts doing that when I use heavily the CPU ( and the temperature goes up). Is this again a problem of the mother/logic board?
    I had recently serviced it since it was not booting properly, but except some permissions repaired, they did noit find anything wrong in the hard drive (which I have  now substituted with a SSD) or other hardware.
    thanks in advance for any help/suggestions
    alessandra

    I think I solved the wifi connection problem, just by switching off completely the router! sounds trivial, but in this case it worked!!!
    the funny behaviour of the trackpad/cursor still persists. any suggestion???
    thanks again

  • Hello hello. I have purchased from a friend a iphone 4s but iphone is closed by uncompte iCloud I tried to contact the person of the old iphone but he also forgot his account iddentification please  help me

    hello. I have purchased from a friend a iphone 4s
    but iphone is closed by uncompte iCloud
    I tried to contact the person of the old iphone but he also forgot his account iddentification nails please help me i

    Well, unless you can get this info, all you'll own is a paperweight. So, return the phone & get your money back. There is no other solution.
    Apple can't/won't help you with this.
    Good luck.

  • Hi I have a HP Envy dv6 Laptop, and I'm wondering if I can upgrade the graphics card on here?

    It has a decent graphics card but I was looking for something with slightly more kick. 
    Processor is: Intel Core i7-3630QM CPU@ 2.40GHz
    RAM:12gb (11.9 usable)
    system type: 64-bit
    Graphics card I have now: Nvidia Geforce GT 650M 2gb. 
    Is it possible? If so you someone recommend it? Or is it not even worth the hassle? 
    Because it IS a laptop and idk if the graphic cards are specialized for them specifically. Any help or advice would be appreciated. Thanks!!

    Well, there is no "card" as that term is understood. It is a chip built right onto the circuitry of the motherboard and cannot be replaced or upgraded. The video you have is top of the line for recent HP consumer laptops so you cannot even get an improvement from a new motherboard. No upward headroom is available. You have to think in terms of a new gaming laptop if you want performance any better than a 2 gb GT650M. 

Maybe you are looking for