User and Group privileges Migration

Hi All,
I am using OBIEE10g. I have created 2 users in RPD.2 Groups in RPD.same group name in Answer catalog.
then we created 2 dashbords.
We implimented below security,
"Dashboar1 for group1 and Dashboard2 for Group2."
Now,We have to migrate 2 dashboards and users and Group with privileges.
Could you please let me know how will do.
Thanks
Gram.

Hi,
If your production doesn't has any obiee contents.
Then, this would be your 1st rpd, catalog which moves on production, this can be done simply by copying contents to the same locations in the production server.
i.e. copy rpd, catalog to the production server (Rpd goes in Oraclebi - server - repository and change rpd in nqs config) and (catalog goes to oracle bi data - web - catlog and change the instance config catlog path).
If your production has any previous contents.
Then, you need to merge the exisiting ones. So, check for repository merge and catalog merge.
http://www.eeblog.org/index.php/obiee-10g-repository-and-catalog-migration-merging/
Thnk u.

Similar Messages

User and Group Database Migration

I am installing SecureACS 4.1 from scratch on a new Server. Is there a way for me to migrate the user and groups from a previous 2.4 and 3.0 vs install? there has to be an easier way to create all those groups and users?

Someone at Cisco decided that from 4.0 onwards they wouldnt upgrade from every previous version any more.
I think this means you'd have to upgrade the existing server to 3.1 then create a backup.
NExt install 3.1 on the new server and restore the backup.
Lastly upgrade the new server to 4.1 and cross your fingers it upgrades smoothly!
An easier (but less complete) method is simply to run csutil -d on the first server, copy the dump file to the new one and then use csutil -l. HOWEVER... this can cause problems if you're group/user config uses NDGs (eg NDG->DCS command authorisation) because only NDG indexes are in the dump file.
When you re-create the NDGs on the new server the indexes are likely all be different.
So in summary only use the csutil route if your just moving very simple groups or users.
BTW there is an option for csutil to load just the users from a dump file leaving groups untouched (run csutil -x to find out more)
Darran
ps we're seeing more people installing ACS (and aaa-reports!) under VMWare - which then makes hardware upgrades a non-issue.

Need to migrate Shared services users and groups from 9.3.1 to 11.1.2.2 ver

Hi All,
We need to migrate Shared services users and groups from 9.3.1 to 11.1.2.2 version. Any help would be appreciated. Can we use CSS import export utility?
Thanks in advance!!

Hi John, In my another environment I have to migrate the users and groups from Hyperion HSS 11.1.1.2 to Hyperion shared services 11.1.2.2. I am using LCM for that, when I export the users and gropus from 11.1.1.2, it exports fine but when i import it to my 11.1.2.2 using LCM, I am getting the below errors.
Error when I try to import the groups:
ErrorEPMIE-00051: Failed to perform operation on role. Could not locate role matching filter {0} and filter attribute {1}. Please ensure that a role exists matching the filter with filter attribute.
EPMIE-00024: Failed to import all of the membership info for group test group. Invalid group members encountered. Please ensure the validity of members and its existence in their respective providers.
Errors when i try to import the users:
ErrorEPMIE-00051: Failed to perform operation on role. Could not locate role matching filter {0} and filter attribute {1}. Please ensure that a role exists matching the filter with filter attribute.
EPMIE-00020: Failed to update user 04668162 during import. Invalid identity for user. Please ensure that the user is available in the system with the identity specified in the import file.
Any idea?
Thanks in advance.

Migrating Users and Groups from Windows 2000 server to Windows 2013 Standard.

OK...let me see if I can get this question out the way I need to....
I inherited a Windows 2000 Server that's on it's last legs. We have a new server, a Windows 2013 Standard machine that we just recently purchased. I need to migrate the users and groups over to the new server, but there are two things that are
making it difficult:
The 2000 machine is NOT a Domain Controller
The 2000 machine is NOT running Active Directory
This is a file server that hangs onto another network of which I have no control of. It has its' own IP address and there is NO WAY we can run Active Directory or make it a domain controller.
I have close to 300 users, groups, and printers to bring over to the new server. Rather than kill myself doing manual input, is there any other way to do this?

Hi,
When you import the CSV file to new server, you need to create a new user account then import the CSV.
http://blogs.technet.com/b/heyscriptingguy/archive/2014/10/01/use-powershell-to-create-local-users.aspx
If you have any issue, i suggest you could ask in PowerShell forums:
https://social.technet.microsoft.com/Forums/en-US/home?forum=winserverpowershell
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How to change default /Users and /Groups to different Volume?

Users are created in /Volumes/<boot>/Users and groups in /Volumes/<boot>/Groups.
We need these to be created on a different volume, eg., /Volumes/External/Users, and /Volumes/External/Groups.
Setup Assistant correctly put user Backups into */Volumes/External/Shared Items/Backups* and also correctly put web services on /Volumes/External/ServiceData -- we want to do the same for Groups and Users.
Groups are the most critical, as the group needs bulk storage. Users we could leave as is if it can't be done.
How can this be configured? We've read File Server Admin, Open Directory Admin, and Advanced Server admin from http://www.apple.com/server/macosx/resources/documentation.html without finding an answer.
Thanks in advance.

1. Create new folders on the external volume to hold users and groups, but to prevent confusion name them something other than "Users" and "Groups". /Volumes/External/NetUsers and /Volumes/External/NetGroups would be reasonable choices.
2. Share both of these folders (in Server Admin -> server name in sidebar -> File Sharing -> Volumes & Browse modes -> select each folder -> click Share near the top right).
3. Enable both folders for automounting on clients (Server Admin -> server name in sidebar -> File Sharing -> Share Points-> select each folder -> Share Point tab under that -> Enable Automount option) with the default options (Directory: /LDAPv3/127.0.0.1, Protocol: AFP, Use for: User home folders and group folders). Be sure to click Save (not just OK in the dialog).
4. To migrate users, run Workgroup Manager, and change the home location for the users you want to move (select Accounts in the toolbar -> /LDAPv3/127.0.0.1 from the hidden pop-up menu under that -> User icon tab at the left -> select the user(s) you want to change -> Home tab on the right -> select the NetUsers option from the "Where" list). Then, for each user, run this command on the server: "sudo cp -Rp /Users/username /Volumes/External/NetUsers".
5. Similarly, move Group folders in WGM (Accounts -> /LDAP... -> Groups icon on left -> select groups to move -> Group Folder tab on right -> NetGroups in the list). Then, for each group, run "sudo cp -Rp /Groups/groupname /Volumes/External/NetGroups".
6. Test to make sure all is working before deleting the old user and group folders from /Users and /Groups (do NOT delete /Users and /Groups themselves, just the individual folders from under them).

Generate report to show all users and groups in Shared Services in EPM 11x

Hi,
Is there any way to generate a report (like a migration report or job status report) which can be generated through workspace/shared services 11.1.1.3 so that my admin can look at all the users and groups created. Something that I can view and probably print out? Any suggestions?
~Adeeba

Yes, I knew this one. This basically shows me the users and groups assigned specific provision access. Is there any way to view a report that shows which users and groups have access to dimensions of an individual planning application?
~Adeeba

Populating users and groups - design considerations/best practice

We are currently running a 4.5 Portal in production. We are doing requirements/design for the 5.0 upgrade.
We currently have a stored procedure that assigns users to the appropriate groups based on the domain info and role info from an ERP database after they are imported and synched up by the authentication source.
We need to migrate this functionality to the 5.0 portal. We are debating whether to provide this functionality by doing this process via a custom Profile Web service. It was recommended during ADC and other presentation that we should stay away from using the database security/membership tables in the database directy and use the EDK/PRC instead.
Please advise on the best way to approach(With details) this issue. We need to finalize the best approach to take asap.
Thanks.
Vanita

So the best way to do this is to write a custom Authentication Web Service. Database customizations can do much more damage and the EDK/PRC/API are designed to prevent inconsistencies and problems.
Along those lines they also make it really easy to rationalize data from multiple backend systems into an orgainzation you'd like for your portal. For example you could write a Custom Authentication Source that would connect to your NT Domain and get all the users and groups, then connect to your ERP system and do the same work your stored procedure would do. It can then present this information to the portal in the way that the portal expects and let the portal maintain its own database and information store.
Another solution is to write an External Operation that encapsulates the logic in your stored procedure but uses the PRC/Server API to manipulate users and group memberships. I suggest you use the PRC interface since the Server API may change in subtle ways from release to release and is not as well documented.
Either of these solutions would be easier in the long term to maintain than a database stored procedure.
Hope this helps,
-Akash

User and Group Recon Error with OID

On a new development installation of OID and OIM, I am getting the following error while trying to run either User or Group reconciliations:
LDAP: error code 53 - Function Not Implemented, search filter attribute modifytimestamp is not indexed/cataloged
How can I add the appropriate index to allow these tasks to run?
Kerry

Have you tried:
4.3 Using Custom Attributes in Oracle Internet Directory
You can search for an attribute in Oracle Internet Directory only if the attribute is indexed. By default, standard attributes of the user and group entries are indexed. If you use a custom attribute, you can index it by using the catalog command. For example, if you migrate automount data to be used by automount programs such as amd or autofs, index the automountKey attribute by using the catalog command, as follows:
catalog connect="connect_str" add="TRUE" attribute="automountKey"
(from http://download.oracle.com/docs/cd/B28196_01/idmanage.1014/e12023/migrate.htm)
Hope this helps
Martin

Subject area security validating users and groups from external table

Hi all.
I don't have practice to put question here, but there is one problem, that seems don't work correctly in OBIEE.
I'm trying to put users in groups within external table and this works fine.
I put security on the subject area level like this:
SA1 -> GroupA allow, Everyone not allow
SA2 -> GroupB allow, Everyone not allow
External table:
User----------Group
A---------GroupA;GroupB
B---------GroupB
Users A, B and GroupA, GroupB exists in the RPD, but I didn't put users inside them, I want this from table.
From the init block, external table I'm taking users and join them in the group. Same name users and groups are also in the presentation service.
When i connect with user A i don't see any subject area, when go to My Account i see in Group Membership/GroupA and GroupB, so it's readed from the external table.
Why in this case the subject area permission is not working?
It works if I explicitly put users in groups, in the RPD.
I have read this blog entry http://kpipartners.blogspot.com/2009/07/groups-webgroups-and-delivers.html and it is said that this works, but I'm interested how.
What should we have in the presentation part, administration, Manage Privileges -> Access within Oracle BI Answers option for those two subject area?
This doesn't work or something is missing:
Re: Security on Subject Areas
Regards
Goran
http://108obiee.blogspot.com

What should we have in the presentation part, administration, Manage Privileges -> Access within Oracle BI Answers option for those two subject area?Yes, you should remove Everyone and add the relevant groups to each Subject Area. You don't need to set privileges in the RPD, in fact that's probably why it doesn't work for you. Leave your RPD Presentation Catalog as "Everyone" = Read as you will controlling access from the Presentation Services and it should work.

Creating users and groups

Hi all,
I have about 100 users and many groups.
How can i create users and groups quickly?
Appreciate any help

Like the way you export planning application to file system and use it as a source to migrate it, In the same way take shared services file system export in the file system and migrate it to the new environment.
Cheers..!!!
Rahul S.

Using users and groups from LDAP in ADF application

Hi there,
I'm using WebLogic Server 10.3.5.0 and JDev 11.1.2.3.0.
I configured my WL server to use the users and groups defined in my LDAP server (they display when I select the Users or Groups tab). So this works fine (I think).
Now I want to use 1 group, let's call the group ApplicationGroup, and all it's users to give them access to my ADF Application.
But I can't find proper/up-to-date info about how to do this.
I tried 2 major things:
1) I configured ADF Security to use Authentication and Authorization. Defined an Enterprise Role with the same name as in my WL server (so ApplicationGroup) then defined a
Application Role with a custom name and added the Enterprise Role to it. That Application Role I gave access to all my TF's and Web Pages. When I deploy this, It just doesn't work (Migrate Users and Groups is not checked).
2) Used the Authentication option in the ADF Security and the rest is the same as in 1). This works +-, I can login with all users so the role mapping isn't configured right I guess?
Any help or documentation that could help me?

Since we aren't using EM I had to find an other way. And I found it.
In web.xml ADF Security (I suppose) automaticly adds 'valid-users'. In my weblogic.xml I added my enterprise role as a principal to 'valid-users' and this works for me.
Thanks for the help.

Local Users and Groups

I've searched all of the associated links on this subject and they don't solve my problem. I do now get that, since I have 8.1 home, I do not have access to the Local Users and Groups feature and that is fine; I am essentially the only user on my new
computer. My problem is the following:
I bought a new Dell Inspiron 2350 and, using Carbonite, migrated everything over to it from my previous XP computer. There are a number of folders to which I am not granted access, such as My Pictures; the only advice the error messages give is to
change the access permissions, but I am not allowed to do that. I am only advised to use the Local Users feature to be able to do that. See my problem?? How do I negate all that stuff so that I can access all the files and folders that were brought
onto my new computer?

Did you try taking ownership ?
http://technet.microsoft.com/en-in/library/cc753659.aspx
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

User and group management

I just installed an evaluation version of weblogic commerce and personalization server. I understand we can create users and groups and assign users to different groups. But I am wondering who has the privilege to do this, developer or end-user? In paticular, is it possible for a super user (should be end-user) in one group to manager all other users in the same group. This feature would be especially useful for B2B portal because usually we would allow a company administrator manage all users within that company. Thanks in advance.Zhe

Hi Steve,
What's the plan to provide ASP support in WLPS in the future ? Is there
any examples of WLPS that uses a 3rd party user management server (such
as LDAP)?
Thanks,
Leo
6th Dimension-
Steve Willcox wrote:
>
We only support a single administrator for a 'realm' of users. We don't have an admin permission mechanism on a group of users basis. The feature you are looking for more fits the ASP model and not an enterprise application model.
However, since WLPS/WLCS uses the WebLogic security realm to access users and groups, you can use a 3rd party user management tool that supports the permissions you are looking for in order to create users and groups. This would require the 3rd party user management tool to have an implementation of the WebLogic Security Realm class that works with this 3rd party user management server.
Zhe Liu wrote:
I just installed an evaluation version of weblogic commerce and personalization server. I understand we can create users and groups and assign users to different groups. But I am wondering who has the privilege to do this, developer or end-user? In paticular, is it possible for a super user (should be end-user) in one group to manager all other users in the same group. This feature would be especially useful for B2B portal because usually we would allow a company administrator manage all users within that company. Thanks in advance.Zhe--
Steve Willcox
BEA Systems, Inc.
ECommerce Application Components R&D
Architect
mailto:[email protected]
http://www.bea.com

Hi I do not want iTunes to open up automatically when I turn on my macbook pro. I tried going to System Preferences Users and Groups Login Items and then I took iTunes off the list but it still opens up automatically when I turn on my laptop.

Hi I do not want iTunes to open up automatically when I turn on my macbook pro. I tried going to System Preferences>Users and Groups>Login Items and then I took iTunes off the list but it still opens up automatically when I turn on my laptop. What should I do?

Hi r,
Make sure you close iTunes before shutdown. And you're quite welcome.

I am trying to stop programs from opening automatically when I turn my computer on. I tried system preferences users and groups login items...then I deleted them from the list but it did nothing.

I am trying to stop programs from opening automatically when I turn my computer on. I tried system preferences>users and groups>login items...then I deleted them itunes and emial from the list but it did nothing. They continue to open up every time I turn on my Macbook Pro.

Hi r,
It sounds like you're running Lion?
Have you tried running Verify and/or Repair Disk?
Have you tried running Repair Permissions?
Do you have at least 15% free space available on your HD?

User and Group privileges Migration

Similar Messages

Maybe you are looking for