USER AUTHORIZATION FOR T-CODE OB52 & OKP1

Hi Experts,
I would like to know if there is a t-code that assigns USER to open another t-code.
OB52 & OKP1?
I want to restrict this t-code for only few users....
Is it possible?
Need advice plese
Rey

Hi Rey,
    As per my knowledge the authorizations will be done by BASIS consultants.
R.K

Similar Messages

  • No authorization for company code in MRBR

    Transaction MRBR is currently wide open. Anyone with authorization to this transaction can unblock invoices in any company code.
    Standard security profiles can only restrict users at universal (*) or purchasing group level. We require control on company code.
    OSS 399953 suggests creating validation rule (GGB0) to test user authorizations for transaction MRBR and authorization object F_BKPF_BUK.
    Can anyone supply the validation coding to solve this security problem?
    Is anyone familiar with this problem ? Do you have a solution ? also None standard SAP solutions are welcome
    Thanks in advance
    Greetings,
    Vincent

    Hi Vincent
    Another option could be to implement an authorization check in the BAdI MRM_RELEASE_CHECK - this is, of course not Standard.
    The code could look somthing like this:
    DATA: wa_rbkp_blocked TYPE mrm_tab_rbkp_blocked.
      LOOP AT i_rbkp_blocked INTO wa_rbkp_blocked.
        AUTHORITY-CHECK OBJECT 'F_BKPF_BUK'
                 ID 'BUKRS' FIELD wa_rbkp_blocked-bukrs
                 ID 'ACTVT' FIELD '02'.
        IF sy-subrc EQ 0.
          APPEND wa_rbkp_blocked TO e_rbkp_blocked.
          CLEAR wa_rbkp_blocked.
        ENDIF.
      ENDLOOP.
    Regards
    Morten Nielsen

  • How to give user authorizations for a Program or an ICF service

    Hi,
       1)How to give user authorizations for a report program or an ICF service.
       2)How to create an user authorization object.
    Regards,
    Vinay.

    check this online help for more info on authorization object creation
    http://help.sap.com/saphelp_nw04/helpdata/en/52/67168c439b11d1896f0000e8322d00/frameset.htm
    for question no1.
    ICF - you either maintain the auth obj relevant at the icf service level itself or you can code call authority object and block access
    for abap programs:
    you maintain auth object at the tcode or code the call authority object within the program
    Regards
    Raja

  • Error from BAPI_ALM_CONF_CREATE - "YOU HAVE NO AUTHORIZATION FOR T-CODE"

    Hi guys.
    I am getting an error message from the BAPI_ALM_CONF_CREATE with the DETAIL_RETURN returning "You have no authorization for the t-code".
    The error is arising from the form AUTH_CHECK_TYPE.
      AUTHORITY-CHECK OBJECT 'C_AFKO_ATY'
           ID 'ACTVT' FIELD tmp_actvt
           ID 'AUTYP' FIELD act_autyp.
    Thanks in advance.

    Hi,
    This might be beacuase you do not have authorization to that Tcode.
    Go to SU53 tcode and check authorizations You have for your User name. Ask Basis people to provide authorization to the Tcode for your User id.
    Regards,
    Karuna

  • User Exit for Company Code verification

    Helo All.
    I have to add a validation that Company code of the sales organisation should be same as company code of the plant from where the product is sourced.
    Is there any User Exit for this?
    Thanks in advance.

    hi,
    please tell me what the T-code for this one
    Regards,
    Vijay

  • User Exit for T.Code F.50

    Hi All,
    i hvae to add new fields in the output list of T.Code F.50.
    Please let me know if there is any user exit for this.
    Thanks in advance

    hai     Sheelesh kumar,
    I am Genaralising This For U.
    It Is ver EASY Procees.
    Just Go To SE84
    Give The PRogram Name Or PAckage name In Which  F.50 is present.
    Then Click On Display.
    Then Click On Enhancements.
    Then U will Get USer Exits Aswell As BADI 's
    IF Found helpful Reward.
    Regards
    Eshwar

  • USer exit for transaction Code APPCHANGE

    I want to include a function module to trigger a workflow
    in a user exit related to program
    SAPLHRHAP_UI_DOCUMENT_REPORT (transaction Code APPCHANGE.)
    The workflow will be triggered when SAVE button  is pressed.
    Thank your for your help

    Here is a program that can be used to find user exits per transaction code.
    report z_find_user_exit no standard page heading.
    tables: tstc, tadir, modsapt, modact,
            trdir, tfdir, enlfdir, tstct.
    data : jtab like tadir occurs 0 with header line.
    data : hotspot(30).
    parameters : p_tcode like tstc-tcode obligatory.
    at line-selection.
      get cursor field hotspot.
      check hotspot(4) eq 'JTAB'.
      set parameter id 'MON' field sy-lisel+1(10).
      call transaction 'SMOD' and skip first screen.
    start-of-selection.
      perform get_data.
      perform write_list.
    *       FORM get_data                                                 *
    form get_data.
      select single * from tstc
                  where tcode eq p_tcode.
      check sy-subrc eq 0.
      select single * from tadir
                where pgmid = 'R3TR'
                  and object = 'PROG'
                  and obj_name = tstc-pgmna.
      if sy-subrc ne 0.
        select single * from trdir
                 where name = tstc-pgmna.
        if trdir-subc eq 'F'.
          select single * from tfdir
                         where pname = tstc-pgmna.
          select single * from enlfdir
                         where funcname = tfdir-funcname.
          select single * from tadir
                         where pgmid = 'R3TR'
                           and object = 'FUGR'
                           and obj_name eq enlfdir-area.
        endif.
      endif.
      select * from tadir into table jtab
                 where pgmid = 'R3TR'
                   and object = 'SMOD'
                   and devclass = tadir-devclass.
      select single * from tstct
              where sprsl eq sy-langu
                and tcode eq p_tcode.
    endform.
    *       FORM write_list                                               *
    form write_list.
      format color col_positive intensified off.
      write:/(19) 'Transaction Code - ',
      20(20) p_tcode,
      45(50) tstct-ttext.
      skip.
      if not jtab[] is initial.
        write:/(95) sy-uline.
        format color col_heading intensified on.
        write:/1 sy-vline,
        2 'Exit Name',
        21 sy-vline ,
        22 'Description',
        95 sy-vline.
        write:/(95) sy-uline.
        loop at jtab.
          select single * from modsapt
          where sprsl = sy-langu and
          name = jtab-obj_name.
          format color col_normal intensified off.
          write:/1 sy-vline,
          2 jtab-obj_name hotspot on,
          21 sy-vline ,
          22 modsapt-modtext,
          95 sy-vline.
        endloop.
        write:/(95) sy-uline.
        describe table jtab.
        skip.
        format color col_total intensified on.
        write:/ 'No of Exits:' , sy-tfill.
      else.
        format color col_negative intensified on.
        write:/(95) 'No User Exit exists'.
      endif.
    endform.
    Regards,
    Rich Heilman

  • User Authorization for a Query

    Hi,
    I have assigned a single role to a user, in which I have authorization for all the Infoproviders, including authorization for reporting. The user is able to access most of the queries, except one query. If there is a problem, he should not have accessed all the queries.
    What problem could have prevented the user from accessing on particular query???
    Any Ideas will be highly appreciated,
    Thanks and Regards,
    Ravi Sankar

    Some possibilities:
    The one query which the user is not able to run , who is the author of this query?
    You need to give authirozation for the object S_RS_COMP1.
    If the user has authorization for this object, then the next possibility is:
    The query may have a filter or a characteristic value for which the value is not set for the user.
    Ravi Thothadri

  • User exit for  this code

    Hi ..
    my requirement  is the program should prompt for 3 parameters (all check marks) with the follwoing text; all check marks enabled by default
    - Variables
    - Key Figures
    - Structures
    So when users select variables then do this part in main program
    test_for = 'STR'.
    perform dowork using test_for.
    for key figures
    test_for = 'CKF'.
    perform dowork using test_for.
    test_for = 'SEL'.
    perform dowork using test_for.
    for variables
    test_for = 'VAR'.
    perform dowork using test_for.
    please give  the code how to write that one.
    thanks in advance
    Madhavi

    Hi Maik,
    am using this quode for one tool .this tool is used for copy queries from one system another instead of transporting.its easy method.so i want to do some modifications for this code.please elaborate ur answer .will assign points.
    Cheers,
    Madhavi

  • User exit for material code based on number range

    Hi viewers,
    Can you please tell me the User exit to be identified for material code t based on  the number range (External or Internal)
    For ex: LAFAMLP is the material code I want this material code as case sensitive .
    It should take what ever case we give.
    Regards
    Kumar

    Hi,
    First goto MM01 transaction code in menu System-> status..pick the program name ,then
    Goto SE38 give that program name select Attributes radio button click on Display button,
    you will get one popup from the popup pick Package ...
    Then now goto SMOD transaction in menu utilities(or/any one of the menu you will find (find option ))->Find this will list out all the possible exits...As follow
    mga00001 material master (industry): checks and enhancements
    mga00002 material master (industry): number assignment
    mga00003 material master (industry and retail): number display
    I think second one will help for you ,,,here you can code your requirement

  • Regarding user authorization of t-code

    I am trying to give authorization for one of my user regarding SM35 
    I did YAT and got attached file. MY ABAP programmer said it is not authorization issue it is something related to system error can you please help me out and guide me what should I do. 
    The problem is whenever she run SM35 it always said Server is not active. I checked using SM13 for server and it is active so I am not sure why it is going on please go through file and If you need more information email me 

    Hi,
    when you create the batch-input session, you could set a user-name with the good authorization.
    You could ask anybody to call your batch-input in SM35, the authorization of the transaction inside your batch is check with the username set in the batch.
    So how did you create your batch-input session ??
    Fred

  • User authorizations for SU53

    Hi,
    I created a role for a user who has to see only POs with ME23N.
    Now I need to enable trx SU53 and related authorization for furthers trxs that I'll enable step by step during his activity.
    The message error is: "You are not authorized to use transaction SU53"
    Thanks
    Best regards

    add this transaction SU53 to the role as well in transaction PFCG. Authorization object S_TCODE can be used for this.

  • User Exit for T.Code : F110 - APP

    Hi Guru's,
    My Company is developing the interface to 3rd party system.
    For that i have to send the all payment data to customized table.
    From custom table to 3rd party system.
    So Please Suggest the Suitable User Exit for F110 - Automatic payment Program.
    The Requirement is After we run the APP System must save that data in customized table Automatically.
    The version is R/3 4.5.
    and i need to give one tab to call the other transaction.
    Please give your advise.
    Thank you very much in Advance.
    Regards,
    Veera.

    Hi,
    You can assign a custom program to your payment method in FBZP and then can populate your custom tables and can pass the data to bank from those custom tables.
    Regards,
    SDNer

  • User-exit for t-code VF11

    HI GROUP
    FIRST OF ALL THANKS TO U ALL.
    U GUYS ARE GREAT HELP.
    THIS TIME I WANT TO KNOW THE USER-EXIT FOR 'VF11'.
    I WANT TO HAVE A CHECK ON THE DATE .
    PLEASE REPLY .
    ITS A BIT URGENT.
    I WILL DEFINATELY REVERT BACK WITH REWARD POINTS.
    THANKS IN ADVANCE.

    HI GROUP
    FIRST OF ALL THANKS TO U ALL.
    U GUYS ARE GREAT HELP.
    THIS TIME I WANT TO KNOW THE USER-EXIT FOR 'VF11'.
    I HAVE A CASE THAT WHEN I AM DOING VF11(i.e INVOICE CANCELLATION) THEN I WANT TO HAVE A CHECK THAT ON THE DOCUMENT OF WHICH I AM CANCELLING THE DOCUMENT.
    MEANS THE DOCEMENT WHICH I WIL LGIVE IN THE VF11. SHOULD HAVE DATE OF THE SY-DATUM MONTH ONLY IF MY CURRENT MONTH IS 4.2006 AND MY (BILLING DOCUMENT DATE ON WHICH THAT DOCUNEBT IS CREATED WHICH I AM TAKING FOR CANCELLATION IS 3.2006 THEN IT SHOULD NOT ALLOW THE DOCEMNT TO BE SAVED)
    FOR THIS I WANT TO IMPLEMENT A EXIT.
    PLEASE HELP ME GUYS ITS VERY VERY URGENT.
    I WILL DEFINATELY REVERT BACK WITH REWARD POINTS.
    THANKS IN ADVANCE.

  • User authorization for goods receipt

    What are all the required user authorizations to perform an items goods receipt?
    Something in administration module authorizations is preventing a GRPO if "full authorization" is not given.

    Try Edit Document Tables.
    Thanks,
    Gordon

Maybe you are looking for