User Credential for NAS support

I would like to configure a NAS in my application. I will be collecting the location, username and password for that network store.
After collecting these details is it possible to set the access rights for the current user, So that user can access this location without using the username and password.
Steps
1. Get Network Share location, username & password
2. Run some code to set proper access right for this location
3. Any process should be able to access this location without using the username and password.
Senthil Kumar M

Hi,
I think the scenarios are different from many aspects. Could you please give us a description of your environment?
First thing came into mind is where would you like to get the password? Passwords are stored in encrypted type. Even you have got it from the database, it is not the original one.
For the application modification, I think it's better seek help in some developer forums.
Best regards
Michael Shao
TechNet Community Support

Similar Messages

  • How to pass current user credential for PAPI service execution

    Hi All,
    As per my requirement I am using the SAP ME PAPI WS to start the SFC. I have used the SAPME PAPI Interface action block in ME within BLS and searched the service and operation also. Required input parameter mapping is also done and I have successfully executed the BLS and SFC is started in ME. In SAPME PAPI Interface action block I have used Credential alias which is standard configuration in MEINT for user MESYS.
    Now what I have seen is that, in ME the SFC is started by user MESYS. But I want to pass the user who is currently executing. Is there any way to pass the current user credential or session for executing the PAPI service. My final target is to use the BLS in IRPT through Xacute query.
    Thanks in Advance
    Chandan

    Hi Sergiy,
    It is only required for Sfc Start operation. It is a generic requirement for all PAPI WS. User ref is not available for all services. I have taken sfc Start operation as an example. But for  complete SFC operation there is no user ref. in Request structure. Then what would be our generic way to execute it through current user credential.
    Thanks
    Chandan

  • Common problems on User Level for SAP Support

    We are working on an RFP for SAP support. The client is having an existing helpdesk where key users or super users try to resolve the issues. If the same are not resolved at this level, these issues are escalated to Level-2 ‘Q’ which is specific to the SAP functionality and / or component. For identifying the correct functionality and / or SAP component, scripts are to be used so that the issue gets escalated to the right ‘Q’.
    We are looking for a list of common problems that occur at the User level so that the same may be translated into a hierarchical model for logging on the user requests to the relevant support ‘Q’. Anybody having worked on a similar proposal or having any insight on the subject, may please contact me.

    Hi,
    It sounds like you hit the wrong forum?!
    This is the Forum for questions around the SAP Business One SDK!
    Please give it one more try to find the right one!
    Thanks & sorry,
    Frank

  • Error in eRecruitment configuration step Define user list for support teams

    Hi Erecruitment experts,
    I am new to SAP Erecruitment and trying to get the system running in ERP 6.00 with EP7.
    When I progress the customising steps under technical settings -->User administration --> Define user list for support teams, I am facing problem of ABAP Dump.
    It says
    Error in the ABAP Application Program
    The current ABAP program "SAPLHR_RCF_CUST_01" had to be terminated because it
    has come across a statement that unfortunately cannot be executed.
    Key words are
    "MESSAGE_TYPE_UNKNOWN" " "
    "SAPLHR_RCF_CUST_01" or "RCF_CUST_F01"
    "CHECK_VALID_USR"
    I think there is a link between Object types CP, BP and relation ships A650, A209 etc in this process.
    Can some one guide me how to overcome this error.
    Tks
    Dhina

    Hi all
    I got them fixed, as they are due to BP creation integration issue.
    Thanks and regards
    Dhina

  • How to sign in for Mozilla Support or register to set up a User ID and Password?

    Well, it looks that I may have found out the answer to my question by submitting this question. One has to ask a question, then choose the not-satisfied with answers found option, then go through all the steps to "create an account" in order get registered for Support and to get one's question answered. Seems like a tedious way to sign up for Mozilla tech support, but there it is.

    You can click the "Volunteer for Mozilla Support" button on the https://support.mozilla.org page to go to the https://support.mozilla.org/get-involved page.
    * https://support.mozilla.org/get-involved/questions

  • IPhone "FIOS remote" app update caused 'Invalid User Credential'

    Hey there,
    I recently updated my "FIOS remote" app on my iPhone and started getting 'Invalid User Credential' when checking my DVR in the app or the TV listings, also wasnt able to submit feedback.
    TheAbout screen says I'm using "Verizon FIOS mobile remote version 3.1.56 build number 16"
    I called Verizon support who helped me.
    The fix:  Open a browser and go to www.verizon.com/fiostv/web and logon. 
    Feedback in the app still doesn't work so I thought I'd post this here for others.  By the way, I think a 100 character limit is too small for feedback.
    Kevin

    LawrenceH wrote:
    I have been trying to get the FiOS Remote app to work, but it keeps giving me problems with the sign on.  I don't think my sign on is the issue.
    My signon works for ...
    1. My FiOS app - in which I can pull my account information
    2. the Verizon mobile website - in which I can login and see all my information
    Within the My FiOS app when I try to manage my DVR, it launches the FiOS remote app.  This app won't let me sign in.  I constantly get the "Sign In Error" User ID or Password is invalid.  Please try again."
    I know this error is erroneous because of my ability to login everywhere else.
    Please advise on what I can do next.
    Hi, I know that app requires that you are connected to the wifi in your home and not on the iphone's 3g.  If you have verified that you are on the Actiontec WiFI (not a second router's wifi) and that your login is correct at all those sites, then you might need to email the dev from the apple store.  It gives you a link to email them there.

  • Correct user credentials for SPAM

    Hi everyone!
    I would like to know which user credential I should use for SPAM/SAINT.
    I usually use DDIC user for SPAM/SAINT but for some tasks, the system warns that DDIC has not the proper authorizations/rights.
    For info: I am currently applying support package stack 16 onto my solution manager.
    Any tip or help is appreciated.
    Thanks in advance.
    Paulo

    Paulo,
    Please copy DDIC id to any other user id and use the new user id.
    Never use DDIC or SAP* to import SPAM  or Support patches.
    Thanks,
    Digesh

  • Webex Meeting Center and Jabber for Ipad support in Webex Telepresence

    Hello, I have a two questions which are unclear based on my browsing of posts in this thread.
    1) Are traditional Webex Meeting Center meetings able to be joined to a Webex Telepresence session?  Ie. I have two callway/webex telepresence nodes (SX20 and a C40) can they have a webex meeting center participant brought in?
    2) Is Jabber for Ipad supported using the Webex Telepresence service?  Using the example endpoints above I have a SX20 and C40 and they want to add a Webex for Ipad endpoint in.
    Thanks.

    You cannot have Telepresence endpoints using Callway service(WebEx TP service) join a webex session directly. You can do this however using WebEx enabled Telepresence which is meant for on-premise users to work with WebEx
    http://www.cisco.com/en/US/docs/telepresence/infrastructure/tms/config_guide/webex_enabled_telepresence/cts_webex_config.html
    In the call way (aka WebEx tp service), the work around is you have to use an endpoint that has multi site capabilities to make one video call and see video from other end points and then make an audio call to the WebEx service and bridge them together. Now users can audio and video and presentation remains on WebEx but it's not like the true webex enabled telepresence which today call way doesnt support
    See attached PDF last page. Also you may need a PSTN subscription to make that call happen

  • User Exit for Requested Delivery Date in Sales Order

    Hi
    Which user exit can be used to change Requested Delivery Date in Sales Order.
    Scenario:  Sales Document Type: OR has Lead Time: 7 days.  System always proposes delivery date after 7 days.  We need to change this Lead Time based on plant.
    Thanks in advance for your support.
    Regards
    Uma

    Hello,
      try with USEREXIT_MOVE_FIELD_TO_VBEP or USEREXIT_SAVE_DOCUMENT_PREPARE, of program MV45AFZZ.
    Hope to be useful.
    Best regards,
    Andrea

  • How many users can 1 Xserve support?

    I have one Xserve (10.5.2, 2x3GHz, 5GB RAM, 1.34TB RAID 5) that I want to support the following services for my SMB:
    DNS, DHCP
    AFP, NFS, SMB
    Open Directory
    Print
    Software Update
    I also want to have mobile sync'd network home folders, but only for ~/Documents and iCals and Address Books (I don't want everyone's MP3s or family photos).
    I occasionally will use NetBoot/NetInstall, but only 1-2 users at once.
    I am getting ready to migrate my company to OpenDirectory and 10.5.2 for all users and was hoping someone here might be able to tell me how many users I can reasonably support with one Xserve.
    Also, is it a bad idea to have everyone using "mobile" accounts? It seems like it would be less strain on the server to have the occasional sync from users than everyone reading & writing all the time. Also, if anything happened, there would be a local copy and a remote copy of any files.
    Thanks.

    Rosemarie,
    BeehiveOnline currently supports 95,000 users and we have groups on the system as large as 10,000, that is probably about as big as we want to go - remember collaborating with 10,000 users is not an effective way of working - maybe a more open way of delivering content may be more appropriate. Given that the only issues we have with very large groups is the time it takes to run and the email traffic it generates as the large group are processed.
    So it is possible to host 10,000 in a group but we need to be warned in advance and work with you to minimise the impact as the group is set up.
    Phil

  • Display Currency Value of User POV for Entity & Value in Text Box (Header)

    I am looking for a function in Financial Reporting Studio that operates the same as the HsCurrency function in Smart View. This would allow batch reports displaying the currency value of the User POV for Entity based on the User POV for Value. Right now I have to have Member Lists for separate reports and different currencies as I am only able to display the Value dimension in the heading of a given report. Users will not be certain of the currency if the Value dimension is <Entity Curr Total>.
    I tried the HFMCurrency text function, however the entity is not defined in a Row / Column / Page reference as the entity is determined by the User's Point of View.
    Is there a way to display the currency value of a User's Point of View for Entity based on the User's Point of View for Value?
    Reference from Oracle Hyperion Smart View for Office, Fusion Edition, User's Guide:
    HsCurrency
    Data sources: Financial Management, Hyperion Enterprise
    HsCurrency retrieves the currency value of the specified dimension member. Entity and Value are the only valid members for the HsCurrency function.
    Syntax
    HsCurrency (“Connection,Entity;Value”)
    Example
    In this example, HsCurrency retrieves the entity currency where the currency for the East Sales entity is USD, and the currency for the UKSales entity is GBR. The EastSales entity displays USD, and UKSales displays GBR.
    HsCurrency(“Comma”,”Entity#EastRegion.EastSales;Value#<Entity Currency>.”)
    HsCurrency(“Comma”,”Entity#EastRegion.UKSales;Value#<Entity Currency>.”)

    Question answered in My Oracle Support Community - Hyperion Reporting Products:
    communities.oracle.com

  • Re: (forte-users) Fusion for the VAR

    Hi,
    It is a good idea. In fact, I think that how Forte is
    going to integrate her own suite of app. too. ( I
    kind of recall that there is a speech on this topic in
    Forum ).
    However, as Forte will most likely goes toward Java, I
    would suggest that you take into account the
    abstraction on Conductor ( which is frankly an event
    broker ) and Fusion ( which handles the XML mapping )
    too. In doing so, you can save guard your investment
    on the design without binding tightly with FORTE and I
    bet there will be tons of event broker or XML parser
    in the future market.
    On the other hand, this integration by Fusion would be
    perfect for a perfect world. But, in this imperfect
    world, it would be hard to do cross-checking between
    apps in Fusion.
    In the old days, we repulicate data or do file
    transfer to integrate apps. In doing so, we also
    build-in all the cross-checking procedure / reports.
    In the case of Fusion, is there such a safety net to
    save guard data integrity. Can I identify a lost
    event and trace back to find out whether it is a app.
    problem or Conductor problem?
    I think the customer would surely like to know.
    Regards,
    Peter Sham.
    --- "Thomas Mercer-Hursh, Ph.D."
    <[email protected]> wrote:
    Fusion has been positioned as an EAI tool, something
    at which it appears to
    be very, very good, but in recent months I have been
    thinking about its
    possible role as an architectural tool for those of
    us who build large,
    multi-application suites of applications. Having
    been tossing some of
    these ideas around the halls at Harrison Street, I
    thought I would try some
    of them on this audience as well to see what
    reaction I got.
    This concept is based on the context that one has
    multiple interacting
    applications which are loosely coupled, or at least
    which should be. E.g.,
    an order processing application may need credit
    status information from an
    accounts receivable application and may generate
    invoices which then need
    to be tracked for payment by that application, but
    the connections between
    these applications are specific, limited, and
    readily enumerable. Mind
    you, people don't always build their applications so
    cleanly modularized,
    but I think we all agree these days that they should
    be.
    The idea is to provide each application with a
    specific API, which it may
    currently have only indirectly. I.e., today one
    might simply have calls
    directly from one application to another, but one
    would gather all these
    links together and define an API, probably in XML
    which covered all of the
    necessary communciations between applications.
    These would then be used to
    build a Fusion Proxy and one would build the
    necessary Conductor processes
    to handle the communications which previously might
    have been made directly
    between applications. There is probably some
    performance loss in this
    process, but many of these interfaces are not
    performance intensive and my
    bet is that if the whole Fusion concept has adequate
    performance for the
    purposes for which it is being primarily marketed,
    then it has the
    performance for this sort of usage.
    One would get several advantages from this
    structure:
    1) Interapplication communications would be handled
    by a Conductor process
    and thus be much more readily configurable than any
    hard-coded link.
    2) One would gain the ability to unplug one's own
    application and plug in a
    customer's application when the customer insisted on
    using something else.
    3) The discipline of working in this structure would
    insure clean boundries
    between applications, which is not only sound
    design, but promotes the
    flexibility of the overall suite.
    4) Those with untransitioned legacy applications
    would have a framework
    that would allow a mixture of new and old
    applications to co-exist, thus
    providing them with a transition strategy until the
    full product line was
    converted.
    Note that I am assuming that one would want to build
    the individual
    applications so that they also used Conductor for
    managing their business
    process logic, but that seems to me to be an
    independent decision from this
    one.
    So, comments?
    Any downsides?
    Any added benefits I haven't covered here?
    Are there many out there that would benefit from
    this approach or just a few?
    Is anyone doing anything like this?
    Note that the one downside I have found so far is
    that Fusion licensing,
    independent of the Conductor aspect, is based on the
    number of proxies and
    so someone like CI who has 15 or more applications
    in a typical site is
    going to have 15 or more proxies. My bet is that
    this can be handled once
    it is clear that use of Fusion by a VAR for
    integrating own applications is
    not the same use as by an end-user integrating
    arbitrary multiple applications.
    =========================================================================
    Thomas Mercer-Hursh, Ph.D email:
    [email protected]
    Computing Integrity, Inc. sales:
    510-233-9329
    550 Casey Drive - Cypress Point support:
    510-233-9327
    Point Richmond, CA 94801-3751 fax:
    510-233-6950
    For the archives, go to:
    http://lists.sageit.com/forte-users and use
    the login: forte and the password: archive. To
    unsubscribe, send in a new
    email the word: 'Unsubscribe' to:
    [email protected]
    =====

    Yes, they do & one page is 1KB page. We use the same instrument to check
    memory usage & to send alerts in our production system.
    Thanks.
    Suraj
    -----Original Message-----
    From: Epari, Madhusudhan [mailto:[email protected]]
    Sent: Monday, May 14, 2001 2:37 PM
    To: 'Saraf, Suraj'; 'Forte User Forum'
    Subject: RE: (forte-users) Instrument for memory used in the partition
    Thanks all for the response. I observed "Allocated Pages" instrument doesn't
    change as and when memory usage by the partition changes. I was trying to
    find a way to measure the actual memory (specifically in bytes or KBs).
    Thanks,
    Madhu
    -----Original Message-----
    From: Saraf, Suraj [mailto:[email protected]]
    Sent: Thursday, May 10, 2001 12:46 PM
    To: 'Epari, Madhusudhan'; 'Forte User Forum'
    Subject: RE: (forte-users) Instrument for memory used in the partition
    Hello,
    I think you can use 'OperatingSystem' service agent & check 'AllocatedPages'
    instrument to see how many memory pages are used. You can compare that with
    your maximum allocation & send alerts depending on that. Thanks.
    Suraj
    -----Original Message-----
    From: Epari, Madhusudhan [mailto:[email protected]]
    Sent: Thursday, May 10, 2001 11:15 AM
    To: 'Forte User Forum'
    Subject: (forte-users) Instrument for memory used in the partition
    Hello Everyone,
    Is there an instrument to track the memory used in the partition at a given
    point of time. I have a requirement where an alert has to be generated in
    the environment when partition uses all its available memory.
    Thanks in advance,
    Madhu
    For the archives, go to: http://lists.xpedior.com/forte-users and use
    the login: forte and the password: archive. To unsubscribe, send in a new
    email the word: 'Unsubscribe' to: [email protected]

  • Synaptics touchpad on HP Mini 110 Windows 7 32 Bit - not working for one user - working for another

    Hi,
    I recently have an issue with Synaptics touchpad on HP Mini 110 Windows 7 32 Bit - NOT working for one user - working for another.
    Windows 7 updates recently installed ???
    By checking the device properties on the user that works - "Synaptics PS/2 Port Touchpad 13/10/2011 Version 15.3.29.0"
    When the other user logs on, the touchpad works for a few seconds, then a displays a black square with a red diagonal line through it, then the touchpad won't respond. Trying to use the keypad to navigate to system diagnosics or anything to find further info is useless....

    Hey eagle_no11,
    Thank you for joining the HP Support Community!
    I will do my best in assisting to hopefully get the TouchPad to work on the second user profile.
    What I would like to start off with, is to restore the original Synaptics drivers onto the profile that is not working correctly. I have included the document Using Recovery Manager to Restore Software and Drivers (Windows 7).
    Once you have installed the original drivers, you will need to complete all updates from both HP, as well as Windows. For these updates, if you open the HP Support Assistant, and select Maintain, you should see an option for updating.
    Please let me know how these steps do work out for you.
    Have a great day!
    I worked on behalf of HP

  • Use of active directory userid/password authentication instead of SAP R/3 User/Password for digital signature?

    Dear all,
    I am looking to setup the use of active directory userid/password authentication instead of SAP R/3 User/Password for digital signature. We SSO to the backened ABAP AS via an SAP NW Portal to which SPNEgo kerberos authentication is setup. Today we specify R3 user id/password to digitally approvae a lot release. The idea is to have users maintain one AD password and don't have to remember the R/3 password anymore and also our Security team to avoid password maintenance.
    I know there are 3 options for digital signature and
    System signature with authorization by user ID and password (We use this currently)
    Digital User signature with verification - (We would like to use this with AD userid/password, so the system still ask the users their AD userid/password for the authentication when they try to "sign" a document.)
    User signature without verification
    Do you think there is a way to configure the system in order to ask and check the active directory userid/password instead of SAP R/3 password? Where can I found documentation about it ?
    I have several different versions of AS ABAP starting from NW 7.02 to NW 7.31.
    My active directory is based on Windows 2008.
    Thanks in advance!!
    Dhee

    Actually enabling Kerberos for SSO purposes and enabling Kerberos for digital signatures are two different topics although the latter is because of the former. I'm interested in the topic as well and I'm currently looking at different options. SAP provides a BAdI for the digital signature API which can be used for external authentication but they do not provide the solution to invoke Kerberos authentication based on username and password. SAP provides a semi solution with NWSSO 2.0 SP2 which works only on Windows with classic dynpros meaning SAP GUI for Windows is assumed. The solution is based on an ActiveX component which does the actual Kerberos authentication using the Secure Login Client which is part of the NWSSO suite. Extending that implementation to non-Windows and non-GUI applications would require some sort of web enabled service that could be used to authenticate the user with username and password. In case authentication is successful, a Kerberos token would be returned to SAP which would then be validated. All the required pieces are there since SAP has Kerberos support now in both stacks of the NetWeaver Application Server, some bits are still missing though which leaves customers looking at 3rd party or custom solutions.

  • Where can I find a user guide for iMovie 11?

    Where can I find a user guide for iMovie 11, if one exists.
    <Re-Titled By Host>

    Greetings Lori2323,
    You can find a helpful iMovie guide by following the link below. Have fun learning iMovie!
    http://help.apple.com/imovie/
    Thank you for contributing to Apple Support Communities.
    Best,
    Bobby_D

Maybe you are looking for