Display Currency Value of User POV for Entity & Value in Text Box (Header)

I am looking for a function in Financial Reporting Studio that operates the same as the HsCurrency function in Smart View. This would allow batch reports displaying the currency value of the User POV for Entity based on the User POV for Value. Right now I have to have Member Lists for separate reports and different currencies as I am only able to display the Value dimension in the heading of a given report. Users will not be certain of the currency if the Value dimension is <Entity Curr Total>.
I tried the HFMCurrency text function, however the entity is not defined in a Row / Column / Page reference as the entity is determined by the User's Point of View.
Is there a way to display the currency value of a User's Point of View for Entity based on the User's Point of View for Value?
Reference from Oracle Hyperion Smart View for Office, Fusion Edition, User's Guide:
HsCurrency
Data sources: Financial Management, Hyperion Enterprise
HsCurrency retrieves the currency value of the specified dimension member. Entity and Value are the only valid members for the HsCurrency function.
Syntax
HsCurrency (“Connection,Entity;Value”)
Example
In this example, HsCurrency retrieves the entity currency where the currency for the East Sales entity is USD, and the currency for the UKSales entity is GBR. The EastSales entity displays USD, and UKSales displays GBR.
HsCurrency(“Comma”,”Entity#EastRegion.EastSales;Value#<Entity Currency>.”)
HsCurrency(“Comma”,”Entity#EastRegion.UKSales;Value#<Entity Currency>.”)

Question answered in My Oracle Support Community - Hyperion Reporting Products:
communities.oracle.com

Similar Messages

My phone displays numbers instead of contact names for incoming calls and text - how do I fix?

My phone displays numbers instead of contact names for incoming calls and text - how do I fix? It used to display the names if there was a contact listed, now it just shows numbers regardless of whether or not the number corresponds to a contact name in the contact list. Can anyone help? I googled this problem and lots of folks have experienced it, however there is not a consensus for a resolution.

Alexandribill, I have been having the exact same issue. I got a new phone and restored my contacts. If the # doesn't have the area code first then the name isn't shown. I just added my husbands area code to my phone and called my phone from his and now his name shows up...Ugh, I have to go through and manually add the area code to all my contacts....
I'd say Verizon needs to rewrite their program to include the area code in the restoring from backup process!

I am facing problem regarding graphical user interface. I am using text box for editing files. I want to show the line numbers and graphical breakpoints along with text box. Can anybody help me in this? Thanks.

I am facing problem regarding graphical user interface. I am using text box for editing files. I want to show the line numbers and graphical breakpoints along with text box. Can anybody help me in this? Thanks.

Thanks for you reply.
But actually I don't want to show the \ (backslashes) to the user in my text box.
Ok let me elaborate this problem little more.
I want to show my text box as it is in normal editors e.g. In Matlab editor. There is a text box and on left side the gray bar shows the line numbers corresponding to the text. Further more i want that the user should be able to click on any line number to mark specific line as breakpoint (red circle or any graphical indication for mark).
Regards,
Waqas Ahmad

Screen /user exit for additional screen on sales order header

Hello sir's,
can anybody help me for this query---
Screen /user exit for additional screen on sales order header.
exit name.
Thanks in advance,
Vikram

Hi,
SAP has provided screen modification. This you can do on "Additional data B" screen at both header and line iteam level.
Additional header data is on screen SAPMV45A 0309, additional item data on screen SAPMV45A 0459. These screens contain the Include screens SAPMV45A 8309 ( this is the screen exit at header ) or SAPMV45A 8459 ( this is the screen exit at item ) as user exits. There few more exits you will have to code to get this screen works. The are,
MV45AOZZ - PBO module of screen
MV45AIZZ - PAI module of screen
MV45ATZZ - Global data definition for user-exit.
Check this link for more info regarding user-exit in sales docs.
http://help.sap.com/saphelp_46c/helpdata/en/1c/f62c7dd435d1118b3f0060b03ca329/frameset.htm
We have alredy implemented this solution at line item level. Let me know if you have any question.
Regards,
RS

User Exit for default values in IW51

Hi All,
Can any suggest User Exit or BADI for default values like Cause code in IW51 Tcode.
Regards,
Samatha.

Hi,
Please check these
Exits
IWO10026                                User check on setting status 'Do not perform'
IWO10027                                User exit: Generate user-defined settlement rule
IWOC0001                                Create PM/SM notification: Determine reference object
IWOC0002                                PM/SM notification: Check whether status change is allowed
IWOC0003                                PM/SM authorization check of ref. object and planner group
IWOC0004                                Change single-level list editing PM/QM/SM ALV settings
Business Add-in
IQS_MASS_CHANGE                         BadI for Mass Changes to Notifications
IQS0_STATUS_MAINTAIN                    Control of Changeability of User Status
NOTIF_AUTHORITY_01                      Additional Authorization Checks for the Notification
WOC_FL_DETERMINE                        Determine Date for Determining Installation Loc. Equi.
IWOC_OBJECTINFO_CHNG                    Changes to Data of Object Info Screen
IWOC_LIST_TUNING                        Performance Tuning for Lists in PM/CS
IWO1_SUBSCREEN_0170                     Display Additional Data on Object Screen 0170 PhysicalSample

User Exit for managing Customer Master Texts- Urgent

Hi All,
I have a requirement in which the the Customer Master Central texts for certain text Id's are to be maintained in such a way via XD02 that whenever any changes are made and it is saved the changes become non editable and added with user date and time and then the user can add additional line of texts but cannot edit the earlier ones. So in this way the earlier texts are prevented from accidental deletion and any new addition has a stamp( User,date,time) to determine who changed it and when. I searcehd for any exit in the program but could find only one i.e. EXIT_SAPMF02D_001
Is this requirement faesible in standard SAP?
Now to me this exit could not serve any purpose.Please help.
thanks,
Manish

Hi,
use the following BADI's which will suitable for ur reqirement
business Add-In CUSTOMER_ADD_DATA_CS .
business Add-In CUSTOMER_ADD_DATA
Regards

SharePoint 2010 : How to display ALL Version History of a list item's multiline text box in a same list as a list view column?

In SharePoint 2010 , I have version history enabled multiple text box 'issue details'. Users mainly uses Data Sheet view and it does not show all version history of that multiple line text box, is there anyway we can display list view column in
data sheet view to display all version history?
2) If we can not display in datasheet view, in standard view, it should display all version history instead of just a link to -view all entries'
I have found one article here and it posts to use below line of code in sharepoint desinger
<SharePoint:AppendOnlyHistory runat="server" ItemId="{$thisNode/@ID}" FieldName="Issue_x0020_Details" ControlMode="Display"></SharePoint:AppendOnlyHistory>
WHen I use this line of code , it displays multiple line of same version history instead of each, please help.

Hi
Greetings. Hope it helps
https://social.technet.microsoft.com/Forums/sharepoint/en-US/d1be5434-7dc9-4941-bf1d-8c12d7e6a155/display-version-history-in-list-view-column?forum=sharepointcustomizationlegacy
Please remember to click 'Mark as Answer' on the answer if it helps you

I need a combo box with 4 values to choose from which will populate a text box on the form with text related to each combo box selection

For example:
Combo box choices:
apple
tomato
squash
Pumpkin
The text box depending on the selection above would state the color:
Green        (if Apple was chosen from the combo box
Red           (if Tomato was chosen from the combo box
Yellow       (if Squash was chosen from the combo box
Orange      (if Pumpkin was chosen from the combo box
I am very new at this and have spent hours looking for an answer. Thank to anyone in advance who can help!

Place each value as the export value of the options in the combo-box and then use this code as the text field's custom calculation script:
event.value = this.getField("ComboBox Name").value;

Mask a currency to an user setting for BDC

Hi All,
I have to do a BDC and it involves a Amount field.
The value that i'm trying to populate is like '1,234.98'.
But the user has a setting for the amount to be in the format'___.___.___,___'.
I mean the '.'s and ','s are interchanged.
How can i automatically change the value to the specific user format, programatically.
Thanks in advance.
Jr.

Hi,
Please use code as below :
data : len type i, pos type i, curval, namt(13), amt(13).
amt = '1,12,234.29'.
len = strlen( amt ).
do len times.
curval = amt+pos(1).
if curval = ','.
curval = '.'.
elseif curval = '.'.
curval = ','.
endif.
concatenate namt curval into namt.
pos = pos + 1.
enddo.
write :/ amt.
write :/ namt.
If helpful, please reward the points,
Regards,
Sandeep Kaushik

User-exit for default values in service order

Hi,
i use EXIT QQMA0025 (EXIT_SAPLIQS0_017) to set some default values by creating
a service notification.
Is there some exit or badi to do the same for service orders. I don't want to use TPMUS.
Regards, Dieter

I create this thread in SD, because
i don't get any answers.
Regards, Dieter

Display error message in user-exits for ME21n

Hi,
I want to give error message in exit EXIT_SAPMM06E_013
but it is getting displayed as information and gets roll back .
Can anyone help to display error message and stop there itself so that to give corret data and save.
the code in this exit is as below.
IF I_EKKO-BUKRS = '0800'.
    CLEAR:V_FLAG.
    READ TABLE TEKPA WITH KEY PARVW = 'ZN'.
    IF SY-SUBRC NE 0.
      MESSAGE E000(ZD)."'XXX' TYPE 'E'.
    ENDIF.
ENDIF.
Thanks,
Suresh

check this
EXIT_SAPMM06E_012 to display error message
especially look at the last post , adding the log.

User exit for requested delivery date at SO header

Hi Experts,
Trying to find a user exit which can be used to calculate the default requested delivery date in the order header based on the current date and the lead-time in the route.
By default, In SO header, requested delivery date is system date.
On based some conditions, i need to add lead time in current date and finally this date should be populated instead of current date in requested delivery date field .
The RDD( requested delivery date ) determination should happen only for some order types and for some sales organization & Distribution Channel.
Thanks,
satendra pateria

Hi Ravi,
Thanks for input.
I neee one more favour on enhancement for automatically batch determination.
In SO item level, when one item is given and press Enter automatically Batch getting popualted.
I need to check Batch Expiry date and if it got expired then need to display a error message.
As of now i got one user exit EXIT_SAPMM07M_010.
And Batch validation should be happened only for some order types and some Sale Org + Distribution
channel.
Thanks,
satendra

How to setup a default value when defining (prompting) for a value?

When I prompt the user in a SQL statement then I can declare a default value like in:
SELECT *
FROM all_users
WHERE username = nvl('&myvariable','SYSTEM');
But when I define a variable this does not work:
define tablename=nvl('&tablename','test123')
How can I setup a default value here?
Peter

Is there a way to define a default value DIRECTLY in SQLplus DEFINE command (and not later when the value is used in SQL statement)?no, there is not for DEFINE but you can use ACCEPT:
SQL> accept tablename prompt 'Enter value for table Name:' default EMP
Enter value for table Name:
SQL> select column_name
2 from cols
3 where table_name='&tablename';
OrderNumber=1234
COLUMN_NAME
EMPNO
ENAME
JOB
MGR
HIREDATE
SAL
COMM
DEPTNO
8 rows selected.Max
[My Italian Oracle blog| http://oracleitalia.wordpress.com/2010/02/07/aggiornare-una-tabella-con-listruzione-merge/]

Column values shift towards left for null values when export to excel

Post Author: pssuresh
CA Forum: Exporting
All,
I have a strange problem when using crystal report 10 export through C# Code. Consider in a row there are 3 columns and i am exporting to excel. ex.Student_id,Student_name,Student_Section. If Student_name values are null, then student_section values get displayed under student_name. There is a column shift towards left when there are null values. If anybody has already faced this problem, please post ur answer.
Note: When i just export to excel directly from crystal report, it works fine. i face problem only when i export through .Net code. I guess it is the problem with some formatting through code. if any body has fix, let me know.
Thanks,
Suresh.P.S

Post Author: pssuresh
CA Forum: Exporting
Thanks for your reply. Even i have done the same thing yesterday to solve that problem. But we have nearly 100 of reports and started migrating now. The best solution crystal reports suggest is this.
http://support.businessobjects.com/library/kbase/articles/c2014430.asp
Thanks,
Suresh.P.S

User exit for making PO tolerance check at header level

Hi,
Is there a user exit or any other settings to make PO tolerance check at the PO header level rather than the usual check at the item level?
Thanks in advance.
Regards,
Arun Mohan

Hi,
Is there a user exit or any other settings to make PO tolerance check at the PO header level rather than the usual check at the item level?
Thanks in advance.
Regards,
Arun Mohan

Display Currency Value of User POV for Entity & Value in Text Box (Header)

Similar Messages

Maybe you are looking for