User-Exit at Save for KL01

Hi,
Is there any user-exit at save for transaction KL01.
Here is my requirement.
Where ever am employee is hired in HR ( transaction PA40; Action = Hire) i have to automatically create an Activity Type ( t.code : KL01 ). I am doing this in user-exit PBAS0001, component EXIT_SAPFP50M_002 on HR side.
The next this is, once activity type is created using transaction KL01, i have to automatically trigger a activity type planning, transaction KP26.
So, i need a user exit at Save in transaction KL01, so that i can trigger KP26 from there. I found one exit COOMKS02, but i its not triggeting from KL01.
Does any one know any user-exit in KL01 which trigger at save. Please let me know
Thanks,
Pratik

Hi Sharad,
Thanks for your reply.
I always have an option for executing both KL01 and KP26 fron PBAS0001, but what i was thinking that if there is any exit available at save in KL01, i can trigger KP26 from there.
If i could not find any exit, i will call both KL01 and KP26 from PBAS0001 itself.
Thanks,
Pratik

Similar Messages

  • COR2 User Exit at Save for Process Order Manipulation

    I am trying to find a User Exit where I can manipulate fields at the item level, specifically batch or CHARG.
    PPCO0007 seems to only have the header fields,  batch is an item level field. Other exits seem to already save the order prior to my making the change.
    Any suggestions will help.
           Thank-You.

    Dear,
    User exit ZXVBZU02 assign value to RESB-CHARG first
    BAdI WORKORDER_UPDATE, and put break-points in method AT_SAVE, AT_RELEASE, IN_UPDATE
    Please refer this thread,
    User exit for transaction code COR2
    Regards,
    R.Brahmankar

  • User exit after save for purchase order create/change

    After generating the purchase order no (ME21) i need to save that PO no into a custom table.....can u plz tell me such user exit where i can do this???

    Hi,
       BADI ME_PROCESS_PO_CUST.
    1. Method to implement would be POST.
    2. Method POST has parameter IM_HEADER which is in reference to IF_PURCHASE_ORDER_MM.
    3. This reference has method GET_CONDITIONS.
    4. call this method to get conditions data.
    5. Make all the changes based on the logic and use method SET_CONDITIONS to change the values.
    User exit will be MM06E005.
    EXIT_SAPMM06E_012.
    <b>Reward points</b>
    Regards

  • User exit after save for purchase order?

    After generating the purchase order no (ME21) i need to save that PO no into a custom table.....can u plz tell me such user exit where i can do this???

    Hello,
    Use the exit
    EXIT_SAPMM06E_012
    EXIT_SAPMM06E_013
    VAsanth

  • User Exit or BADI for F-28 on Save Event

    Dear Expert,
    Please tell me User Exit or BADI for F-28 on Save Event for T.Code F-28.

    Dear Expert,
    Please tell me User Exit or BADI for F-28 on Save Event for T.Code F-28.

  • USER-EXIT on SAVE event for IE01

    Hi,
    I need USER-EXIT on SAVE event for t-code IE01.
    EXIT IEQM0003 work only first time after pressing "SAVE".
    IF i press "SAVE"  second time equipment will be created.
    Edited by: andriy.hulyk on Jan 26, 2012 12:45 PM

    Here is my code:
    IF DATA_ILOA-TPLNR IS INITIAL.
      AUTHORITY-CHECK OBJECT 'ZZ_MC_FLC'
      ID 'ZZFLC' FIELD '*'.
      CASE SY-SUBRC.
        WHEN 0."SAP-ALL User
          EXIT."OK
        WHEN 12."User without restriction
          EXIT."OK
        WHEN OTHERS.
          AUTHORITY-CHECK OBJECT 'ZZ_MC_FLC'
          ID 'ZZFLC' FIELD '01'.
            CASE SY-SUBRC.
              WHEN 0."Create eq. only with FL for some work centers
                MESSAGE E250(ZPM) WITH 'test' RAISING POSTING_NOT_ALLOWED_EXT.
            ENDCASE.
        ENDCASE.
    ENDIF.
    If i press "SAVE" firs time it work great. But next pressing just create new equipment. My restriction does not work(

  • User Exit or Badi for CN22

    Hi All
    Can anyone tell me an user exit or badi for Tcode CN22 which gets triggered when i save a network.
    whenever i make changes in the WBS assignment of the network in the activity level then the i need to copy dates to other networks whenever a change in WBS element is done. Please treat this as pretty urgent
    Thanks
    Sowjanya

    Hello,
    Please check and see if the BADI
    <b>"AFABD_CHANGE"</b> suits your requirement
    it has
    <b>AFABD
    Network: Dialog table for AFA</b>
    as a changable parameter....
    and import parameter as
    <b>CAUFVD                       
    Dialog Structure for Order Headers and Items</b>
    Reward if helpful
    Regards
    Byju

  • User exit or BADI for ME22N

    Hi,
    I need a user exit or Badi for defaulting Plant at line item level.
    The scenario goes like this: when ever user tries to change an existing Purchase order and tries to add a new line item in it, I need to trigger USEREXIT or BADI , so that it reads the previous line Plant and updates the current line with the same plant.
    I tried with user exit MM06E005 but it didnt seem to work.
    Can any one please help me?
    I am new to BADI, so I am not sure how to find the BADI and use it. It would be great if anyone can help me i this.
    Thanks
    Ramya

    Hello
    The BAdI ME_PROCESS_PO_CUST is the right one. The method PROCESS_ITEM should be triggered whenever the user changes something in the purchase order at item level and executes any kind of function (e.g. ENTER, CHECK or SAVE).
    However, instead of overwriting the user input via the BAdI you should implement method CHECK ( Closing Check ) where you can validate the user input. If any of your validation fails you can send an error message and set CHANGING parameter CH_FAILED = 'X'. This approach is much more transparent for the user.
    NOTE: In order to "send" an error message you need to add the include mm_messages_mac to your implementing class. For an example see class CL_EXM_IM_ME_PROCESS_PO_CUST (should be available on ERP 6.0):
    METHOD if_ex_me_process_po_cust~process_item .
      DATA: ls_mepoitem TYPE mepoitem,
            ls_customer TYPE mepo_badi_exampl,
            ls_tbsg     TYPE tbsg.
      INCLUDE mm_messages_mac. "useful macros for message handling
    * here we check customers data
      ls_mepoitem = im_item->get_data( ).
      IF ls_mepoitem-loekz EQ 'D'.
    * check field badi_afnam
        IF ls_customer-badi_afnam IS INITIAL.
          mmpur_metafield mmmfd_cust_02.
          mmpur_message_forced 'W' 'ME' '083' text-003 '' '' ''.
        ENDIF.
      ENDIF.
    ENDMETHOD.                    "IF_EX_ME_PROCESS_PO_CUST~PROCESS_ITEM
    Regards
      Uwe

  • User Exit OR Badi for MK01 transaction (used for saving vendor amster data)

    Hi All,
    I have a requirement where I have to call my workflow, when we create the Vendor using my custom transaction (ZMK01, which is a copy of standard transaction MK01).
    For Workflow triggering I am using FM 'SAP_WAPI_CREATE_EVENT' in the user exit  'EXIT_SAPMF02K_001' but this is only for checking the data on saving Vendor Master.
    So I want to use FM 'SAP_WAPI_CREATE_EVENT' at right place. For that , I need User-Exit or BADI which is used for saving vendor master data.
    Could anyone please help me to find out the user exit or BADI for save event of vendor master data using transaction MK01.
    Looking forward to your advise and thanks in advance.
    Best Regards,
    Mamta

    Hi ,
    I forgot to activiate the project linked with User exit 'EXIT_SAPMF02K_001' .
    so problem is solved now
    Thanks,
    Mamta

  • Need User exit or BAdi for VF01

    Hi.
    I need User exit or Badi for VF01.
    Condtion: After Successful Save of document number in database.
    Please help me.
    To be reward all helpfull answers.
    Regards.
    Jay

    Hi
    The follwing user exits and badis available:
                                                                                    Enhancement                                                                               
    V05N0001                              
    User Exits for Printing Billing Docs. using POR Procedure       
    V05I0001                              
    User exits for billing index                                    
    SDVFX011                              
    Userexit for the komkcv- and kompcv-structures                  
    SDVFX010                             
      User exit item table for the customer lines                     
    SDVFX009                               
    Billing doc. processing KIDONO (payment reference number)       
    SDVFX008                              
    User exit: Processing of transfer structures SD-FI              
    SDVFX007                               
    User exit: Billing plan during transfer to Accounting           
    V61A0001                               
    Customer enhancement: Pricing                                   
    V60P0001                               
    Data provision for additional fields for display in lists       
    V60A0001                               
    Customer functions in the billing document                                                                               
    Business Add-in                                                                                SD_CIN_LV60AU02                       
    BADI for billing                                                
    VOR_WA_FAKTURA                        
    Billing before Goods Issue                                                                               
    If it is helpful rewards points.
                         Regards
                          Pratap.M

  • User exit or badi for me01

    Hello all,
    I tried a lot with the user exit EXIT_SAPLMEQR_001and EXIT_SAPMM06E_005 for me01 so the i can insert the material number and plant number to the ztable when ever i am making changes or creating source list for a material.
    Can any once tell me which badi or user exit should i use so the when ever i save the source list it is called and insert the material number and plant number in ztable.
    Help me out of this..............

    Could anbody tell me ?

  • User exit on SAVE event in tranasaction CS01

    Hi all,
    Please tell me user exit on save event in transaction cs01.
    Thank you.

    Hi,
    Check the following user exits.
    PCSD0001            Applications development R/3 BOMS                          
    PCSD0002            BOMs: Customer fields in item                              
    PCSD0003            BOMs: Customer fields in header                            
    PCSD0004            BOM comparison                                             
    PCSD0005            BOMs: component check for material items                   
    PCSD0006            Mass changes user exit                                     
    PCSD0007            Check changes in STKO                                      
    PCSD0008            WBS BOM: Customer-specific explosion for creating          
    PCSD0009            Order/WBS BOM, determine URL page                          
    PCSD0010            Order/WBS BOM, determine explosion date                    
    PCSD0011            Knowledge-based order BOM, parallel update                 
    PCSD0012            Customer - Mat. number/mat. number during material exchange
    PCSD0013            Customer-specific processing of an explosion for BOM browser
    hope it helps
    Regards
    Rajesh Kumar

  • User Exit or BADi for FB02

    Hi
    Does somebody knows some user exit or BADI for add validations to FB02 when user changes some position data.
    I need to validate some header BKPF (Company, Currency) and detail BSEG (Posting Key, Account Bank)  data when change the position.
    Does somebody knows one user exit or Badi wich i can use to do it  ?
    Thanks
    Frank

    Thanks for your answers.
    I need to make validations for send error messages and i can not use FI Validations and Sustitutions because i send several differents messages  and wuold need N steps (one step for each message).
    The enhancement points called in CHANGE_TO_MODIFY are executed when ok-code is 'CHAE' that is when the user calls FB03 and then change to modify mode for make changes like if he goes to FB02 , but these enhancements are no executed any more when the data changes are made and user press save.
    I already found some enhancement executed just before data saving (it's in FORM belegsummen_pruefen) so i make the validation and send the error message , but when error message appears the screen get protected so the user can not change any screen field for make the data corrections.
    Best Regards
    Frank

  • User exit or BADI for MB31

    hi,
           In  Mb31 tcode,if we enter quantity more than the existing stock quantity for a particular batch and if we try to save it,then an error message should appear without saving.Is there any user exit or BADI for this functionality?.
    Thanks
    Sri

    Hi experts,
    If some one got the solution for this issue, kindly post the exact badi or user exit for this, her I'm struck with same problem.
    Regards
    Vimal Rsj

  • User exit or BADI for Tcode ME51N

    Hi All,
    My requirement is i need to check available quantity at the time of Purchase req creation. If PR quantity is available in stock then it should not allow to create new PR.
    Is there any user exit or Badi for this requirement. Kindly send me.
    Regards,
    Paras

    Hai,
    User Exit:  MEREQ001
    Function exit             EXIT_SAPLMEREQ_001  
                                   EXIT_SAPLMEREQ_002  
                                   EXIT_SAPLMEREQ_003  
                                   EXIT_SAPLMEREQ_004  
                                   EXIT_SAPLMEREQ_005  
                                   EXIT_SAPLMEREQ_006  
                                   EXIT_SAPLMEREQ_007  
                                   EXIT_SAPLMEREQ_008  
                                   EXIT_SAPLMEREQ_009  
                                   EXIT_SAPLMEREQ_010  
    Screen exit               SAPLMEGUI           
    Include tables           CI_EBANDB           
                                   CI_EBANMEM

Maybe you are looking for