User exit for 0INFOPROV with InfoCube in BWA

Hello Everyone,
We recently added few InfoCubes into BWA and due to the reporting requirements and the way the reports were designed we had to create a user exit for 0INFOPROV in order to populate the InfoCube name based on the selection criteria for the report.
But when we run the report, the report is ending up with an error message and we are not able to execute any queries on top of that multiprovider with the user exit embedded.
If we remove the user exit and hard code the value for 0INFOPROV it works fine.
Can anyone please let me know how you guys have dealt with the user exit for BWA.
Let me know if additional details are to be provided.
Thanks
Dharma.

Hello Vitalty,
Thanks for looking into the message.
The issue is, when we have a restricted keyfigure which has selection on 0INFOPROV to populate the InfoCube name through user exit the query is ending up with error messages.
The error messages state
"Error Error while reading data; navigation is possible
Error Errors occurred during parallel processing of query 21, RC: 3
Error The following errors occurred during parallel processing of query 22
Error Error reading the data of InfoProvider ZCSLSMR10$X
Error Inconsistent input parameter (parameter: <unknown>,  value <unknown>)
Thanks for your time.
Any help would be really appreciated.
Thanks
Dharma.

Similar Messages

  • User exit for me29n with project wise

    hi gurus,
    is there any user exit for me29n .. i want to Restrict my authorizastion based on project, that is only user from that particular project should be able to release.. is it posible
    With Regards,
    Shakthi Raj N.
    <<Phone number removed>>
    Edited by: Matt on Jan 28, 2009 10:02 AM

    Hi
    To find out the user exits:
    Goto System->status. Obtain program name.
    In Attributes obtain Package name.
    Goto tcode CMOD. Specify the pkg and pgm naem. It will give you a list of user exits.
    Hope this helps
    Regards,
    Jayanthi.K

  • Question - SD user exit for Billing with multiple sales orders

    We have a situation where we are summarizing Accounting Billing document updates via OBCY, transaction type VBRK .
    We will also have multiple sales orders per billing document.
    One of our accounts is a COGS- clearing account which will post for both delivery and billing documents.
    Our goal will be to clear the COGS-clearing account after the delivery and billing has occurred.
    One alternative being evaluated is to update the assignment field ( bseg -zuonr) for the sales order. 
    To do this, one of the SD user exits , perhaps SDVFX008, would be necessary to update the sales order from vbrp-vbel2 to bseg-zuonr.
    I am concerned about
    1) will the update work
    2) what will be the effect on summarization
    If we try to implement the user exit , would we be successful to just update the assignment field for just the COGS accruall account.   _Therefore the next effect is that AR,Rev, etc, would summarize , but the COGS clearing would break out due to the update to the assignment field..
    Does anyone have any experience similar to this situation.
    Thank you,
    Jeff

    Hi
    You can use SDVFX008 or FI Substitution exit RGGBS000 (Form U100)
    You can very well update the required GL (COGS Clearing) with the Sales order No... However, how exactly it would behave upon summarization, I am not sure about that.. you need to develop that and see
    In the COGS account during PGI, Sales Order No is populated always in the field "Sales Order"... In your case, the COGS clearing account should be having sales order no populated...
    So, if you are successful to populate Sales Order No during billing in the "Sale Order" Field for the COGS clearing account, that should also suffice...
    or See if you can have relevant sort key in FS00 for the COGS clearing account so that Sales order no is always populated..
    Regards
    Ajay M

  • User exit for XD01 with delivery priority

    Hi ,
    I am using a user exit EXIT_SAPMF02D_001 for customer master.Below is the piece of code .I am just displaying message based on delivery priority field in the customer master .
    But the probleam is when user only change the value in delivery priority field then only my message should come .But now my logic executes when ever no changes in the delivery priority field also and any touch other than this field also getting the message.
    Means the value in the delivery priority field  not refreshed in the customer master screen .Thats why the message is coming any time when not touching the field also.
    so can somebody suggest what to do?My logic should work only when delivery priority field only changed.
    TABLES:tpakd.
    DATA:l_lprio TYPE lprio,
         l_kztlf TYPE kztlf,
         l_antlf TYPE antlf.
    DATA:l_lp(2) TYPE c VALUE '03',
         l_kz(1) TYPE c VALUE 'B',
         l_an(1) TYPE c VALUE '1'.
    SELECT SINGLE * FROM tpakd
                    INTO tpakd
                    WHERE parvw = 'WE'
                      AND ktokd = i_kna1-ktokd.
    IF sy-subrc = 0 .
      MOVE i_knvv-lprio TO l_lprio.
      MOVE i_knvv-kztlf TO l_kztlf.
      MOVE i_knvv-antlf TO l_antlf.
      IF l_lprio = l_lp AND ( l_kztlf NE l_kz OR l_antlf NE l_an )  .
        MESSAGE w534(zm).
        ELSEIF l_lprio IS NOT INITIAL
                AND ( l_kztlf IS NOT INITIAL
                OR  l_antlf IS NOT  INITIAL
                OR  l_antlf NE '0'
                OR  l_antlf NE '9' ).
        MESSAGE w534(zm) .
      ENDIF.
    ELSE.
      EXIT.
    ENDIF.

    HI
    I think something doesn't sound good in this control
    ELSEIF l_lprio IS NOT INITIAL
      AND ( l_kztlf IS NOT INITIAL
           OR l_antlf IS NOT INITIAL                  "<-------
           OR l_antlf NE '0'
           OR l_antlf NE '9' ).
        MESSAGE w534(zm) .
    ENDIF.
    The control for L_ANTIF seems to be always valid, probably you should use AND insted of OR
    ELSEIF l_lprio IS NOT INITIAL
      AND ( l_kztlf IS NOT INITIAL
           OR ( l_antlf IS NOT INITIAL                  "<-------
           AND l_antlf NE '0'
           AND l_antlf NE '9' ) ).
        MESSAGE w534(zm) .
    ENDIF.
    Max
    Max

  • User Exit for ME52N with Purchase Requisition number & line item number

    Does anyone know which user exit I could use to get at the purchase requisition number and line item number when I am trying to change a PR.  I see various exits with im_req_item but when I code a popup in the include it is not appearing.  I am just not finding the right exit.

    You can use enhancement MEREQ001, function exit EXIT_SAPLMEREQ_005. This enhancement description gives impression that it can only be used if you have custom fields but it can be used even when you don't have custom fields.

  • User Exit  for Compounded Key

    I have written a FM that was included in a user exit.  The purpose of my user exit is to restrict  certain  Accounts that my Query uses.  The problem that I run into is that the  Account is a numerical value which is NOT a key.  For example, I could have one  account that exists in two different reporting divisions such as Africa and Asia and might not want to restrict Africa.  If I don't take into consideration the divison, then I will be eliminating required  Accounts.  I thought about creating a seperate user exit for the reporting division but then I might run into the problem of eliminating certain  Accounts that are associated with that division.  I'm thinking that If I create another user exit for the division, then I will somehow have to link the two(not sure how this would work). Secondly, the divison and account is a compounded key in my InfoCube.  There is not InfoObject that holds the compounded key so I can not create a variable of this type.
    I'm not sure what would be the best way to solve this problem so any input you can give is greatly appreciated.
    Thanks,
    Nyrvole

    Hi Reddy,
    This user exit can creating & activating in project by using CMOD Transaction code.
    AFAR0002 is Enhanc for external determination of depreciation.
    Thank you
    Anil

  • GL Account User Exit for all FI transactions

    Hi Experts,
    We  have to create a Ztable and it stores GL bank account principal amount.
    Ex: 130121 (SCB Bank) - Rs.10,00,000.00
    In SAP , for the same GL account closing balances will available in FS10N of each month.
    Ex: 130121 (SCB Bank) for Sep'09 - Rs.8,50,000.00
    Now, the requirement is..
    I want to put an User Exit for this Bank GL Account . It has to perform a check operation whenever this GL accounts comes for posting on any FI transactions, and
    it'll check each time to the GL account principal balances(from Ztable) with the posting amounts and give a popup message regarding about the bank limits exceeded, remainaing amounts and then only they can able to post the transactions.
    Ex: If they are posting in F-02 (general ledger posting) the amount showing in GL account which go for my user exit calculations everytime and the same will be for all other FI GL transactions.
    Hope u understood else pls let me know by your replies.
    Pls advise.
    thanks & regards
    sankar.

    Hi..
    In the tcode where u want to put the user exit, In the menu select System--> Status and double click on the program.
    Then click on search and give the search term as "call-customer function".. and see if there are any available user exits..
    Select one, and double click on the 3 number..if '003' ,double click on it,it will take u to the Fm..where u will find an include starting with Z.
    Here u can write the code u want.
    Regards,
    Vishwa.

  • User-Exit for the Me22n

    Hi,
       I am Mohan. I faced on Problem with the User Exit. I write the user exit for the ME21n for PO Creation. While Creation of the PO the Purchase Requition is mandatory. it is working for the ME21n. But PO creation is another two ways is there. Those are ME22N (Purchase order---> Create) and ME23N
    (Purchase order---> Create) for this case also my condition applicable but it is not working for this case. How to write the Code for this. by using Sy-ucomm  also. but it is not working.
    Please help me.
    Regards,
    Mohan

    Following the user exit's related to ME22N transaction.
    AMPL0001 User subscreen for additional data on AMPL
    LMEDR001 Enhancements to print program
    LMELA002 Adopt batch no. from shipping notification when posting a GR
    LMELA010 Inbound shipping notification: Transfer item data from IDOC
    LMEQR001 User exit for source determination
    LMEXF001 Conditions in Purchasing Documents Without Invoice Receipt
    LWSUS001 Customer-Specific Source Determination in Retail
    M06B0001 Role determination for purchase requisition release
    M06B0002 Changes to comm. structure for purchase requisition release
    M06B0003 Number range and document number
    M06B0004 Number range and document number
    M06B0005 Changes to comm. structure for overall release of requisn.
    M06E0004 Changes to communication structure for release purch. doc.
    M06E0005 Role determination for release of purchasing documents
    ME590001 Grouping of requsitions for PO split in ME59
    MEETA001 Define schedule line type (backlog, immed. req., preview)
    MEFLD004 Determine earliest delivery date f. check w. GR (only PO)
    MELAB001 Gen. forecast delivery schedules: Transfer schedule implem.
    MEQUERY1 Enhancement to Document Overview ME21N/ME51N
    MEVME001 WE default quantity calc. and over/ underdelivery tolerance
    MM06E001 User exits for EDI inbound and outbound purchasing documents
    MM06E003 Number range and document number
    MM06E004 Control import data screens in purchase order
    MM06E005 Customer fields in purchasing document
    MM06E007 Change document for requisitions upon conversion into PO
    MM06E008 Monitoring of contr. target value in case of release orders
    MM06E009 Relevant texts for "Texts exist" indicator
    MM06E010 Field selection for vendor address
    MMAL0001 ALE source list distribution: Outbound processing
    MMAL0002 ALE source list distribution: Inbound processing
    MMAL0003 ALE purcasing info record distribution: Outbound processing
    MMAL0004 ALE purchasing info record distribution: Inbound processing
    MMDA0001 Default delivery addresses
    MMFAB001 User exit for generation of release order
    MRFLB001 Control Items for Contract Release Order
    Regards.

  • User Exit for saving Invoice

    Hi Experts,
    My req, is I have to check billing date with order date/ delivery date while creating the invoice in VF01.
    For that I have done codig in user exit RV60AFZZ, so it gives error ,but the billing date field get disable.
    & this invoice no. alsp get created.
    So can anybody plz tell me in which user exit i have to put my code ???
    I have tried with RV60AFZC.But it is not working.
    My code is
    FORM userexit_pricing_prepare_tkomp.
    *  TKOMP-zzfield = xxxx-zzfield2.
    * structure for vbak
    TYPES:BEGIN OF ty_vbak,
          vbeln TYPE vbak-vbeln,
          audat TYPE vbak-audat,
          END OF ty_vbak.
    *likp structure
    TYPES:BEGIN OF ty_likp,
          vbeln TYPE likp-vbeln,
          lfdat TYPE likp-lfdat,
          END OF ty_likp.
    *vbrp structure
    TYPES:BEGIN OF ty_vbrp,
          vgbel TYPE vbrp-vgbel,
          vgpos TYPE vbrp-vgpos,
          aubel TYPE vbrp-aubel,
          aupos TYPE vbrp-aupos,
          END OF ty_vbrp.
    DATA:it_vbak TYPE STANDARD TABLE OF ty_vbak,
         it_likp TYPE STANDARD TABLE OF ty_likp,
         it_vbrp TYPE STANDARD TABLE OF ty_vbrp.
    DATA:wa_vbak TYPE ty_vbak,
         wa_likp TYPE ty_likp,
         wa_vbrp TYPE ty_vbrp.
    ***** take reference document no & delivery no. *****
    LOOP AT xvbrp.
      wa_vbrp-vgbel = xvbrp-vgbel.
      wa_vbrp-vgpos = xvbrp-vgpos.
      wa_vbrp-aubel = xvbrp-aubel.
      wa_vbrp-aupos = xvbrp-aupos.
      APPEND wa_vbrp TO it_vbrp.
    ENDLOOP.
    IF it_vbrp IS NOT INITIAL.
    SELECT vbeln audat FROM vbak
          INTO TABLE it_vbak
          FOR ALL ENTRIES IN it_vbrp
          WHERE vbeln = it_vbrp-aubel.
    SELECT vbeln lfdat from likp
           INTO TABLE it_likp
           FOR ALL ENTRIES IN it_vbrp
           WHERE vbeln = it_vbrp-vgbel.
    ENDIF.
    **** check for invoice date with order date *****
    LOOP AT it_vbak INTO wa_vbak.
      IF xvbrk-fkdat IS NOT INITIAL AND xvbrk-fkdat < wa_vbak-audat.
        MESSAGE 'Invoice Date is less than Order Date' TYPE 'E'.
      ENDIF.
    ENDLOOP.
    **** check for invoice date with delievery date *****
    LOOP AT it_likp INTO wa_likp.
      IF xvbrk-fkdat IS NOT INITIAL AND xvbrk-fkdat < wa_likp-lfdat.
        MESSAGE 'Invoice Date is less than Delivery Date' TYPE 'E'.
      ENDIF.
    ENDLOOP.
    ENDFORM.                    "USEREXIT_PRICING_PREPARE_TKOMP
    Thanks & Regards,
    Anagha Deshmukh

    Hello,
    These are the user exits for the tcode.
    J_3RSINV            Export sales
    SDVFX007            User exit: Billing plan during transfer to Accounting
    SDVFX008            User exit: Processing of transfer structures SD-FI
    SDVFX009            Billing doc. processing KIDONO (payment reference number)
    SDVFX010            User exit item table for the customer lines
    SDVFX011            Userexit for the komkcv- and kompcv-structures
    V05I0001            User exits for billing index
    V05N0001            User Exits for Printing Billing Docs. using POR Procedure
    V60A0001            Customer functions in the billing document
    V60P0001            Data provision for additional fields for display in lists
    V61A0001            Customer enhancement: Pricing
    Keep the break point and try in the debugging in each and every exit and see which user exit is triggred.

  • How to find out user exit for LI20

    any one please tell me how can find user-exit for LI20
    Regards,
    Venkat

    Well if you want to search user exits associated with the t-code LI20...
    then go to se93, enter the t-code LI20->click on display-> go the program-> go to find next in the top menu (under Edit) and write "user_exit" and select "In the main program" and and click on continue... in case if there is any user exit; it will show you.
    Regards,
    Raman

  • How to find the user-exit for transaction fpp2

    Hi experts,
    could you help me how can I find the user-exit for transaction fpp2. I tried to after the package, but I did not find it.

    Hi,
    Use the following program to find user exits of specified code.
    *& Tables
    TABLES : tstc,     "SAP® Transaction Codes
             tadir,    "Directory of Repository Objects
             modsapt,  "SAP® Enhancements - Short Texts
             modact,   "Modifications
             trdir,    "System table TRDIR
             tfdir,    "Function Module
             enlfdir,  "Additional Attributes for Function Modules
             tstct.    "Transaction Code Texts
    *& Variables
    DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
    DATA : field1(30).
    DATA : v_devclass LIKE tadir-devclass.
    *& Selection Screen Parameters
    SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
    SELECTION-SCREEN SKIP.
    PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
    SELECTION-SCREEN SKIP.
    SELECTION-SCREEN END OF BLOCK a01.
    *& Start of main program
    START-OF-SELECTION.
    Validate Transaction Code
      SELECT SINGLE * FROM tstc
        WHERE tcode EQ p_tcode.
    Find Repository Objects for transaction code
      IF sy-subrc EQ 0.
        SELECT SINGLE * FROM tadir
           WHERE pgmid    = 'R3TR'
             AND object   = 'PROG'
             AND obj_name = tstc-pgmna.
        MOVE : tadir-devclass TO v_devclass.
        IF sy-subrc NE 0.
          SELECT SINGLE * FROM trdir
             WHERE name = tstc-pgmna.
          IF trdir-subc EQ 'F'.
            SELECT SINGLE * FROM tfdir
              WHERE pname = tstc-pgmna.
            SELECT SINGLE * FROM enlfdir
              WHERE funcname = tfdir-funcname.
            SELECT SINGLE * FROM tadir
              WHERE pgmid    = 'R3TR'
                AND object   = 'FUGR'
                AND obj_name = enlfdir-area.
            MOVE : tadir-devclass TO v_devclass.
          ENDIF.
        ENDIF.
    Find SAP® Modifications
        SELECT * FROM tadir
          INTO TABLE jtab
          WHERE pgmid    = 'R3TR'
            AND object   = 'SMOD'
            AND devclass = v_devclass.
        SELECT SINGLE * FROM tstct
          WHERE sprsl EQ sy-langu
            AND tcode EQ p_tcode.
        FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
        WRITE:/(19) 'Transaction Code - ',
        20(20) p_tcode,
        45(50) tstct-ttext.
        SKIP.
        IF NOT jtab[] IS INITIAL.
          WRITE:/(95) sy-uline.
          FORMAT COLOR COL_HEADING INTENSIFIED ON.
          WRITE:/1 sy-vline,
          2 'Exit Name',
          21 sy-vline ,
          22 'Description',
          95 sy-vline.
          WRITE:/(95) sy-uline.
          LOOP AT jtab.
            SELECT SINGLE * FROM modsapt
            WHERE sprsl = sy-langu AND
            name = jtab-obj_name.
            FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
            WRITE:/1 sy-vline,
            2 jtab-obj_name HOTSPOT ON,
            21 sy-vline ,
            22 modsapt-modtext,
            95 sy-vline.
          ENDLOOP.
          WRITE:/(95) sy-uline.
          DESCRIBE TABLE jtab.
          SKIP.
          FORMAT COLOR COL_TOTAL INTENSIFIED ON.
          WRITE:/ 'No of Exits:' , sy-tfill.
        ELSE.
          FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
          WRITE:/(95) 'No User Exit exists'.
        ENDIF.
      ELSE.
        FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
        WRITE:/(95) 'Transaction Code Does Not Exist'.
      ENDIF.
    Take the user to SMOD for the Exit that was selected.
    AT LINE-SELECTION.
      GET CURSOR FIELD field1.
      CHECK field1(4) EQ 'JTAB'.
      SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
      CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
    I executed the above program but there are no user exits for the specified Transaction.
    Thanks,
    Naveen Kumar.

  • How to  find the user exit for a screen..

    Hi,
    plz help me how to find the user exit for a screen..?
    Regards
    Anbu

    Hi,
    check this program this will give you the list of user-exit and BADI for the perticular Tcode.
    REPORT  zuserexit_badi.
    TABLES : tstc,
    tadir,
    modsapt,
    modact,
    trdir,
    tfdir,
    enlfdir,
    sxs_attrt ,
    tstct.
    DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
    DATA : field1(30).
    DATA : v_devclass LIKE tadir-devclass.
    PARAMETERS : p_tcode LIKE tstc-tcode,
    p_pgmna LIKE tstc-pgmna .
    DATA wa_tadir TYPE tadir.
    START-OF-SELECTION.
      IF NOT p_tcode IS INITIAL.
        SELECT SINGLE * FROM tstc WHERE tcode EQ p_tcode.
      ELSEIF NOT p_pgmna IS INITIAL.
        tstc-pgmna = p_pgmna.
      ENDIF.
      IF sy-subrc EQ 0.
        SELECT SINGLE * FROM tadir
        WHERE pgmid = 'R3TR'
        AND object = 'PROG'
        AND obj_name = tstc-pgmna.
        MOVE : tadir-devclass TO v_devclass.
        IF sy-subrc NE 0.
          SELECT SINGLE * FROM trdir
          WHERE name = tstc-pgmna.
          IF trdir-subc EQ 'F'.
            SELECT SINGLE * FROM tfdir
            WHERE pname = tstc-pgmna.
            SELECT SINGLE * FROM enlfdir
            WHERE funcname = tfdir-funcname.
            SELECT SINGLE * FROM tadir
            WHERE pgmid = 'R3TR'
            AND object = 'FUGR'
            AND obj_name EQ enlfdir-area.
            MOVE : tadir-devclass TO v_devclass.
          ENDIF.
        ENDIF.
        SELECT * FROM tadir INTO TABLE jtab
        WHERE pgmid = 'R3TR'
        AND object IN ('SMOD', 'SXSD')
        AND devclass = v_devclass.
        SELECT SINGLE * FROM tstct
        WHERE sprsl EQ sy-langu
        AND tcode EQ p_tcode.
        FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
        WRITE:/(19) 'Transaction Code - ',
        20(20) p_tcode,
        45(50) tstct-ttext.
        SKIP.
        IF NOT jtab[] IS INITIAL.
          WRITE:/(105) sy-uline.
          FORMAT COLOR COL_HEADING INTENSIFIED ON.
    Sorting the internal Table
          SORT jtab BY object.
          DATA : wf_txt(60) TYPE c,
          wf_smod TYPE i ,
          wf_badi TYPE i ,
          wf_object2(30) TYPE c.
          CLEAR : wf_smod, wf_badi , wf_object2.
    Get the total SMOD.
          LOOP AT jtab INTO wa_tadir.
            AT FIRST.
              FORMAT COLOR COL_HEADING INTENSIFIED ON.
              WRITE:/1 sy-vline,
              2 'Enhancement/ Business Add-in',
              41 sy-vline ,
              42 'Description',
              105 sy-vline.
              WRITE:/(105) sy-uline.
            ENDAT.
            CLEAR wf_txt.
            AT NEW object.
              IF wa_tadir-object = 'SMOD'.
                wf_object2 = 'Enhancement' .
              ELSEIF wa_tadir-object = 'SXSD'.
                wf_object2 = ' Business Add-in'.
              ENDIF.
              FORMAT COLOR COL_GROUP INTENSIFIED ON.
              WRITE:/1 sy-vline,
              2 wf_object2,
              105 sy-vline.
            ENDAT.
            CASE wa_tadir-object.
              WHEN 'SMOD'.
                wf_smod = wf_smod + 1.
                SELECT SINGLE modtext INTO wf_txt
                FROM modsapt
                WHERE sprsl = sy-langu
                AND name = wa_tadir-obj_name.
                FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
              WHEN 'SXSD'.
    For BADis
                wf_badi = wf_badi + 1 .
                SELECT SINGLE text INTO wf_txt
                FROM sxs_attrt
                WHERE sprsl = sy-langu
                AND exit_name = wa_tadir-obj_name.
                FORMAT COLOR COL_NORMAL INTENSIFIED ON.
            ENDCASE.
            WRITE:/1 sy-vline,
            2 wa_tadir-obj_name HOTSPOT ON,
            41 sy-vline ,
            42 wf_txt,
            105 sy-vline.
            AT END OF object.
              WRITE : /(105) sy-uline.
            ENDAT.
          ENDLOOP.
          WRITE:/(105) sy-uline.
          SKIP.
          FORMAT COLOR COL_TOTAL INTENSIFIED ON.
          WRITE:/ 'No.of Exits:' , wf_smod.
          WRITE:/ 'No.of BADis:' , wf_badi.
        ELSE.
          FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
          WRITE:/(105) 'No userexits or BADis exist'.
        ENDIF.
      ELSE.
        FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
        WRITE:/(105) 'Transaction does not exist'.
      ENDIF.
    AT LINE-SELECTION.
      DATA : wf_object TYPE tadir-object.
      CLEAR wf_object.
      GET CURSOR FIELD field1.
      CHECK field1(8) EQ 'WA_TADIR'.
      READ TABLE jtab WITH KEY obj_name = sy-lisel+1(20).
      MOVE jtab-object TO wf_object.
      CASE wf_object.
        WHEN 'SMOD'.
          SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
          CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
        WHEN 'SXSD'.
          SET PARAMETER ID 'EXN' FIELD sy-lisel+1(20).
          CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
      ENDCASE.
    Reagards,
    Bharat.

  • User exits for sales order

    Dear all SAP experts,
    How to find out the user exits for sales document type? Especially the user exits which are called when we save the sales order.
    With best regards,
    Allabaqsh G. Patil

    Hi,
    Also there is user exit to refresh data
    USEREXIT_REFRESH_DOCUMENT
           It is always necessary to refresh user-specific data before   *
          the next document will be processed.                          *
          This can be done in this userexit.                            *
          This userexit can be used to refresh user-specific data       *
          when the processing of a sales document is finished           *
          - after the document is saved                                 *
          - when you leave the document processing with F3 or F15       *
          It may be necessary to refresh user-specific data before      *
          the next document will be processed.                          *

  • To find the User Exits for a particular Transaction.

    hi,
        I want to find the number of User Exits for a The Transaction MM01 or MM02,
        I serched in the forums but could not find satisfactory ans,
        I tried with:
                 T.Code-> System>Status->Prog Name>SE38>find Call Customer-Exit.
        But its not helping me,
        Please help me.
    Thanks and Regards
    Suraj S Nair.

    hi ,
    if you are new to user exist use --> follw the below methos to find the user exit for a particular transaction or t-code
    create one custom pgm in se38 and execute >selection screenenter t-code and execute it will return all the user exists for a specific transaction..
    Finding the user-exits of a SAP transaction code
    * Finding the user-exits of a SAP transaction code
    * Enter the transaction code in which you are looking for the user-exit
    * and it will list you the list of user-exits in the transaction code.
    * Also a drill down is possible which will help you to branch to SMOD.
    * Written by : SAP Basis, ABAP Programming and Other IMG Stuff
    *              http://www.sap-img.com
    report zuserexit no standard page heading.
    tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
             tables : tstct.
    data : jtab like tadir occurs 0 with header line.
    data : field1(30).
    data : v_devclass like tadir-devclass.
    parameters : p_tcode like tstc-tcode obligatory.
    select single * from tstc where tcode eq p_tcode.
    if sy-subrc eq 0.
       select single * from tadir where pgmid = 'R3TR'
                        and object = 'PROG'
                        and obj_name = tstc-pgmna.
       move : tadir-devclass to v_devclass.
          if sy-subrc ne 0.
             select single * from trdir where name = tstc-pgmna.
             if trdir-subc eq 'F'.
                select single * from tfdir where pname = tstc-pgmna.
                select single * from enlfdir where funcname =
                tfdir-funcname.
                select single * from tadir where pgmid = 'R3TR'
                                   and object = 'FUGR'
                                   and obj_name eq enlfdir-area.
                move : tadir-devclass to v_devclass.
              endif.
           endif.
           select * from tadir into table jtab
                         where pgmid = 'R3TR'
                           and object = 'SMOD'
                           and devclass = v_devclass.
            select single * from tstct where sprsl eq sy-langu and
                                             tcode eq p_tcode.
            format color col_positive intensified off.
            write:/(19) 'Transaction Code - ',
                 20(20) p_tcode,
                 45(50) tstct-ttext.
                        skip.
            if not jtab[] is initial.
               write:/(95) sy-uline.
               format color col_heading intensified on.
               write:/1 sy-vline,
                      2 'Exit Name',
                     21 sy-vline ,
                     22 'Description',
                     95 sy-vline.
               write:/(95) sy-uline.
               loop at jtab.
                  select single * from modsapt
                         where sprsl = sy-langu and
                                name = jtab-obj_name.
                       format color col_normal intensified off.
                       write:/1 sy-vline,
                              2 jtab-obj_name hotspot on,
                             21 sy-vline ,
                             22 modsapt-modtext,
                             95 sy-vline.
               endloop.
               write:/(95) sy-uline.
               describe table jtab.
               skip.
               format color col_total intensified on.
               write:/ 'No of Exits:' , sy-tfill.
            else.
               format color col_negative intensified on.
               write:/(95) 'No User Exit exists'.
            endif.
          else.
              format color col_negative intensified on.
              write:/(95) 'Transaction Code Does Not Exist'.
          endif.
    at line-selection.
       get cursor field field1.
       check field1(4) eq 'JTAB'.
       set parameter id 'MON' field sy-lisel+1(10).
       call transaction 'SMOD' and skip first   screen.
    *---End of Program
    Regards,
    Prabhudas

  • User exit for merging the credit limit in different credit control area.

    Dear All,
    Please provide user exit for the merging the credit limit in different credit control area as well as logic for the same.
    I have to merge the overall credit limit of the customer for some divisions. At this time in one company code we have created 9 credit control area as per product line. While creating customer master data and Credit management (FD32) user has assigned the different limit with respective to credit control area e. g Customeru2019s total limit assigned is 10 laks.  For credit control 1100 Limit is Rs. 3 laks and for credit control area 2200 limit is 7 laks. Now the user wants to merge the credit limit for only above two credit control area. The sales orders should get created in any credit control area up to 10 laks.
    Regards,
    Suresh

    Dear Damodhar/All,
    Would you please explain me prerequisite setting from functional side for these user exit?
    I want complete functional setting prior to ABAP application so that it work properly post configuration.
    Regards,
    Suresh

Maybe you are looking for