USER-EXIT for DELIVERY--very very urgent

Hi all,
can u plz tell me the user-exit for delivery i.e this exit should be called after the delivery order is created.
plz suggest some specific exit.it is very very urgent.
Regards
pabitra

Rout ,
u cannt find out user exits after the Creation.
V02V0001            Sales area determination for stock transport order
V02V0002            User exit for storage location determination
V02V0003            User exit for gate + matl staging area determination (headr)
V02V0004            User Exit for Staging Area Determination (Item)
V50PSTAT            Delivery: Item Status Calculation
V50Q0001            Delivery Monitor: User Exits for Filling Display Fields
V50R0001            Collective processing for delivery creation
V50R0002            Collective processing for delivery creation
V50R0004            Calculation of Stock for POs for Shipping Due Date List
V50S0001            User Exits for Delivery Processing
V53C0001            Rough workload calculation in time per item
V53C0002            W&S: RWE enhancement - shipping material type/time slot
V53W0001            User exits for creating picking waves
VMDE0001            Shipping Interface: Error Handling - Inbound IDoc
VMDE0002            Shipping Interface: Message PICKSD (Picking, Outbound)
VMDE0003            Shipping Interface: Message SDPICK (Picking, Inbound)
VMDE0004            Shipping Interface: Message SDPACK (Packing, Inbound)
*        FORM-Routinen für Userexits
         include mv50afzz.
         include mv50afz1.
         include mv50afz2.
         include mv50afz3.          "Userexit neu zu Release 3.0A
         include mv50afzk.          "Userexit 4.6A (KOMKG/KOMPG)
         include mv50afzl.          "Userexit 4.6A Liefergruppen
                                                               "n_693000
         include mv50afzp.          "Userexit for pricing screen input
Regards
Prabhu

Similar Messages

User-exit for delivery while assigning serial numbers(urgent)

hi all,
can u plz tell me the specific user exit for delivery (VL01n) while assigning serial numbers?
i am getting the serial numbers for material in database table OBJK .i am also getting these serial no.s in IQ01.
   while doing delivery,i am going for extra-->serial number.at this time one screen for serial number is comming.those serial numbers which are stored in objk will transfer to this screen of delivery automatically.
for this , i want a specific user-exit for delivery so that i can transfer the serial nos from objk to that screen of delivery.plz suggest .(urgent )
any idea is highly appreaciated
Regards
pabitra

You can find from below list of user exists
V02V0001            Sales area determination for stock transport order
V02V0002            User exit for storage location determination
V02V0003            User exit for gate + matl staging area determination (headr)
V02V0004            User Exit for Staging Area Determination (Item)
V50PSTAT            Delivery: Item Status Calculation
V50Q0001            Delivery Monitor: User Exits for Filling Display Fields
V50R0001            Collective processing for delivery creation
V50R0002            Collective processing for delivery creation
V50R0004            Calculation of Stock for POs for Shipping Due Date List
V50S0001            User Exits for Delivery Processing
V53C0001            Rough workload calculation in time per item
V53C0002            W&S: RWE enhancement - shipping material type/time slot
V53W0001            User exits for creating picking waves
VMDE0001            Shipping Interface: Error Handling - Inbound IDoc
VMDE0002            Shipping Interface: Message PICKSD (Picking, Outbound)
VMDE0003            Shipping Interface: Message SDPICK (Picking, Inbound)
VMDE0004            Shipping Interface: Message SDPACK (Packing, Inbound)

User Exit for Delivery Creation

Hi,
I am looking for an User Exit for Delivery Creation, which should provide a Sales Order Number. This is required before Batch determination. Can any one help.

Hi,
I think you can try with MV50AFZ1 user exit.
In move fields to LIKP and LIPS routine you can get the sales order.
LIPS-VGBEL gives the sales order.
Thanks,
Rohan

NEED VL02N VL09 USER-EXIT FOR DELIVERY COMPLETE INDICATOR IN PURCHASE ORDER

I NEED VL02N VL09 USER-EXITS FOR DELIVERY COMPLETE INDICATOR IN PURCHASE ORDER POSITIONS.
F.X: IF POST QUANTITY 10, BUT PURCHASE ORDER POSITION QUANTITY 30, I NEED AT ANY CASE TO SET DELIVERY COMPLETE INDICATOR FOR RELEVANT OUTBOUND DELIVERY AN P. ORDER POSITIONS.
THANKS/

Hi Malka,
It's possible set the system to mark automatically the delivery completed indicator.
First you need to set the under delivery and over delivery tolerances.You do this in customizing:
Materials Management under Purchasing -> Material Master -> Define Purchasing Value Keys.
Once you set this, you can insert this value keys on Material Master Record for the materials.
When you create the PO with a material with this value keys set the system will check the under delivery and over delivery set on customizing.
In customizing you also have the option to let the system mark automatically the delivery indicator based on delivery tolerances set.
In Customizing for Inventory Management and Physical Inventory under Goods Receipt -> Set Delivery Completed Indicator, you can determine for each plant whether the system automatically sets the delivery completed indicator for delivery quantities within the underdelivery and overdelivery tolerances.
You can test setting the under delivery for 0 (with a warning message) and see if the system will only mark delivery complete only for over delivery.
You can also work with the following Badi: MB_GOODSMOVEMENT_DCI. This Badi also allows custom logic for setting the delivery completed indicator in a PO item.
Message: M7 433 (The "delivery completed" indicator is set for the purchase order item)
Regards,
Rodrigo

Extended Idoc - User exit for delivery VL01 and Invoice VF01

Hi Experts,
We are developing Extended Idoc for order - cash cycle.The extended Idoc contains 4 extra fields.
I want to know the User exits where i can populate the extended segment field values for VL01 and VF01 transactions.

HI
exits available for VL01.
VMDE0004                                Shipping Interface: Message SDPACK (Packing, Inbound)
VMDE0003                                Shipping Interface: Message SDPICK (Picking, Inbound)
VMDE0002                                Shipping Interface: Message PICKSD (Picking, Outbound)
VMDE0001                                Shipping Interface: Error Handling - Inbound IDoc
V53W0001                                User exits for creating picking waves
V53C0002                                W&S: RWE enhancement - shipping material type/time slot
V53C0001                                Rough workload calculation in time per item
V50S0001                                User Exits for Delivery Processing
V50R0004                                Calculation of Stock for POs for Shipping Due Date List
V50R0002                                Collective processing for delivery creation
V50R0001                                Collective processing for delivery creation
V50Q0001                                Delivery Monitor: User Exits for Filling Display Fields
V50PSTAT                                Delivery: Item Status Calculation
V02V0004                                User Exit for Staging Area Determination (Item)
V02V0003                                User exit for gate + matl staging area determination (headr)
V02V0002                                User exit for storage location determination
V02V0001                                Sales area determination for stock transport order
For VF01..
Enhancement
V61A0001                                Customer enhancement: Pricing
V60P0001                                Data provision for additional fields for display in lists
V60A0001                                Customer functions in the billing document
V05N0001                                User Exits for Printing Billing Docs. using POR Procedure
V05I0001                                User exits for billing index
SDVFX011                                Userexit for the komkcv- and kompcv-structures
SDVFX010                                User exit item table for the customer lines
SDVFX009                                Billing doc. processing KIDONO (payment reference number)
SDVFX008                                User exit: Processing of transfer structures SD-FI
SDVFX007                                User exit: Billing plan during transfer to Accounting
SDVFX006                                User exit tax line in transfer to accounting
SDVFX005                                User exit reserves in transfer to accounting
SDVFX004                                User exit G/L line in transfer to accounting
SDVFX003                                User exit cash clearing in transfer to accounting
SDVFX002                                User exit for A/R line in transfer to accounting
SDVFX001                                User exit header line in delivery to accounting
J_3RSINV

User exit for Delivery output execution

Hello All,
         My query is i need a delivery relevant user exit for output trigger which the specific order reason and for this only it should trigger in the VL01N (delivery) output. Kindly let me know if any user exit is there where i can give my condition(by checking the specific order reason from the proceding sales document) and for that only it should trigger in the VL01N output . PLZ let me know the answer ASAP.

Hi
Check the following enhancements and BADI's
Enhancement
VMDE0004                                Shipping Interface: Message SDPACK (Packing, Inbound)
VMDE0003                                Shipping Interface: Message SDPICK (Picking, Inbound)
VMDE0002                                Shipping Interface: Message PICKSD (Picking, Outbound)
VMDE0001                                Shipping Interface: Error Handling - Inbound IDoc
V53W0001                                User exits for creating picking waves
V53C0002                                W&S: RWE enhancement - shipping material type/time slot
V53C0001                                Rough workload calculation in time per item
V50S0001                                User Exits for Delivery Processing
V50R0004                                Calculation of Stock for POs for Shipping Due Date List
V50R0002                                Collective processing for delivery creation
V50R0001                                Collective processing for delivery creation
V50Q0001                                Delivery Monitor: User Exits for Filling Display Fields
V50PSTAT                                Delivery: Item Status Calculation
V02V0004                                User Exit for Staging Area Determination (Item)
V02V0003                                User exit for gate + matl staging area determination (headr
V02V0002                                User exit for storage location determination
V02V0001                                Sales area determination for stock transport order
Business Add-in
DELIVERY_ADDR_SAP                       Address Change in Delivery Processing
DELIVERY_PUBLISH                        Announcement of delivery data during database update
Also look at the Standard program of Delivery SAPMV50A
for the user exit Include MV50AFZZ
<b>Reward points for useful Answers</b>
Regards
Anji

User Exit for Delivery Updating

Hi,
I am creating one user exit for delivery ,
My condition:
If XLIKP-UPDKZ (Update indicator) = Update (U).
Read table Deferred COGS Activity (Z1009) with key
Delivery Number eq LIKP-VBELN.
If sy-subrc <> 0
Exit.
Else.
If V50AGL-WARENAUSGANG=X (PGI is active)
Update table Z1009 with
WADAT_IST = XLIKP-WADAT_IST
PGI_ERNAM = SY-UNAME
PGI_ERDAT = SY-DATUM.
where Delivery Number (DL_NO) eq LIKP-VBELN.
If delivery updated successfully then no problem ,
if not updated then I need to through error message to log.
I need Function Module for this.
Can u help me.

These ar all the User Exits used in VL01N.
Exit Name           Description
V02V0001            Sales area determination for stock transport order
V02V0002            User exit for storage location determination
V02V0003            User exit for gate + matl staging area determination (headr)
V02V0004            User Exit for Staging Area Determination (Item)
V50PSTAT            Delivery: Item Status Calculation
V50Q0001            Delivery Monitor: User Exits for Filling Display Fields
V50R0001            Collective processing for delivery creation
V50R0002            Collective processing for delivery creation
V50R0004            Calculation of Stock for POs for Shipping Due Date List
V50S0001            User Exits for Delivery Processing
V53C0001            Rough workload calculation in time per item
V53C0002            W&S: RWE enhancement - shipping material type/time slot
V53W0001            User exits for creating picking waves
VMDE0001            Shipping Interface: Error Handling - Inbound IDoc
VMDE0002            Shipping Interface: Message PICKSD (Picking, Outbound)
VMDE0003            Shipping Interface: Message SDPICK (Picking, Inbound)
VMDE0004            Shipping Interface: Message SDPACK (Packing, Inbound)
You can also look at BADI: LE_SHP_DELIVERY_PROC. It has several implementations which could be useful to you.

User exits for delivery picking confirmation and transfer order creation

Hi
We have a scenario for which we need help.
This is to do with replenishment from plant to plant.
We have sales sets.
The sales sets needs to be replenished from one plant to another. We want the componenets of the sales sets to picked from the issuing plant. For this we need a transfer order. this needs tobe confirmed and then the goods issue should take place from the issuing plant. Its a two step process.
we are doing Sales sets in STO. The explosion takes place in STO. However when we create deliveries for this. Only the sales set header item without its components are flowing into the delivery.
The Tranfer order does not contain the components either.
However post the goods issue we can create a TO with reference to the TR. This is is not acceptable because we want the picking and confirmation to occur before PGI from the issuing plant.
Could anybody help: We want the TO to be created with the components even though in the delivery only the Sales set header appears. Can u suggest a user exit in which when we create the TR from the delivery the components of the set.
After confirmation of the TO then we want the picking status to be put as C.
Supreeth

Hi,
Check the following users exits.
MWMRFSSG            user exit for sorting TOs in RF system-guided transaction
MWMRFUP             Customer defined general purpose pushbutton called from scr.
MWMRP001            Cust. Exit for Fixed Bin Replenish.: Delivery Item Selection
MWMRP002            Cust. Exit for Fixed Bin Replenishment: TR Quantity Distr.
MWMRP003            Customer Exit for Replenishment using RLLNACH1
MWMRP004            User Exit for Replenishment using RLLNACH4
MWMTO001            Enhancements for end of transfer order generation
MWMTO010            Exit: Calculation of Total Planned TO Processing Time
MWMTO011            Correction of Planned Processing Time for TO Item
MWMTO012            Correction of Sorting and Split Transfer Order
MWMTO013            Stock Removal for Sev. Storage Types as in Stringent FIFO
MWMTOAU3            Separate selection of posting changes for autom.TO creation
MWMTR001            Exits at the end of transfer rqmnt creation (IM,PP interf.)
MWMD0001            Transfer order print via RLVSDR40
MWMD0002            Transfer order print as multiple process with RLKOMM40
MWMIDI07            Enhancement for Output WMPIHU (Create Pick-HU) Inbound
MWMIDO11            Enhancement for message WMTORD: TO with several items
MWMIDO12            Enhancement for Output WMPIHU (Pick-HUs) Outbound
MWMIDO13            Extension for WMMBXY (subsequent tasks after goods movement)
MWMPP001            Enhancement WM/PP Interface (automatic TR generation)
Regards,
Murali

Generate VICS BOL Number in User Exit For Delivery

Hello,
I have been asked to automatically generate a BOL for a delivery based the Voluntary Interindustry Commerce Solutions (VICS) Association specifications. However, I am having a difficult time finding the correct user exit in the delivery process.
Can any of you SD gurus point me in the right direction?
Regards, Dean.

I think I found the exit I needed EXIT_SAPLV56U_004. I was wrong about needing the exit for delivery, the requirement is the shipment.
With that said, I think I am on the right path but I was hoping that there was someone who has implemented the VICS Bill of Lading in SAP. I found that the Handling Units -> External Identification seems to have all of the foundation for generating the BOL per the VICS specification. However, there has been concern that if that was done, that something could cause an issue with Handling Units. Which we are using to generate labels for shipments.
So, has anyone used the Handling Units->External Identification for VICS Bill Of Lading generation? If so, anything I should be concerned about?
Regards, Dean.

User exit for Delivery Module

Hi ,
I had a include program in Development for Delivery module, "MV50AFZ1" in program "SAPMV50A", which is supposed to be a user exit. So I transported that to production on clients requirement, but then its creating some problems for client, so he wants his previous program to be back. But I can't change this "MV50AFZ1" program in development nor in Production. So how could I bring that previous code in production.
Plz help, and if possible tell me how can I change "MV50AFZ1" program code.
Thanks.
Shailesh.

check the below link for user exits in SD
http://help.sap.com/saphelp_46c/helpdata/en/1c/f62c7dd435d1118b3f0060b03ca329/content.htm
Some more links r here....
User Exits In Sales Document Processing
http://help.sap.com/saphelp_46c/helpdata/en/1c/f62c7dd435d1118b3f0060b03ca329/content.htm
Get the access key from basis for the program SAPMV45A. And change the screen.
First create a subscreen with that two fields, call that subscreen in the screen 8309.
call subscreen s2 including 'SAPMV45A' '9002'.
How to add custoim fields on the additiondata b tab of va01 and va02
VA01/VA02 screen exit
Re: Is there any enhancement available .....for va01??
Add a field in va01 transaction
Additional Screen field in VA41 or VA01
Here are the user exits available for creating PO.
AMPL0001 - User subscreen for additional data on AMPL
LMEDR001 - Enhancements to print program
LMELA002 - Adopt batch no. from shipping notification when posting a GR
LMELA010 - Inbound shipping notification: Transfer item data from IDOC
LMEQR001 - User exit for source determination
LMEXF001 - Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001 - Customer-Specific Source Determination in Retail
M06B0001 - Role determination for purchase requisition release
M06B0002 - Changes to comm. structure for purchase requisition release
M06B0003 - Number range and document number
M06B0004 - Number range and document number
M06B0005 - Changes to comm. structure for overall release of requisn.
M06E0004 - Changes to communication structure for release purch. doc.
M06E0005 - Role determination for release of purchasing documents
ME590001 - Grouping of requsitions for PO split in ME59
MEETA001 - Define schedule line type (backlog, immed. req., preview)
MEFLD004 - Determine earliest delivery date f. check w. GR (only PO)
MELAB001 - Gen. forecast delivery schedules: Transfer schedule implem.
MEQUERY1 - Enhancement to Document Overview ME21N/ME51N
MEVME001 - WE default quantity calc. and over/ underdelivery tolerance
MM06E001 - User exits for EDI inbound and outbound purchasing documents
MM06E003 - Number range and document number
MM06E004 - Control import data screens in purchase order
MM06E005 - Customer fields in purchasing document
MM06E007 - Change document for requisitions upon conversion into PO
MM06E008 - Monitoring of contr. target value in case of release orders
MM06E009 - Relevant texts for "Texts exist" indicator
MM06E010 - Field selection for vendor address
MMAL0001 - ALE source list distribution: Outbound processing
MMAL0002 - ALE source list distribution: Inbound processing
MMAL0003 - ALE purcasing info record distribution: Outbound processing
MMAL0004 - ALE purchasing info record distribution: Inbound processing
MMDA0001 - Default delivery addresses
MMFAB001 - User exit for generation of release order
MRFLB001 - Control Items for Contract Release Order
EXIT_SAPMM06E_001 Other Number Range or Own Document Number
EXIT_SAPMM06E_004 User Exit for Cust.-Specific Control of Import Data Screens in Purchasing
EXIT_SAPMM06E_005 Field Selection Control: Vendor Address Screen
EXIT_SAPMM06E_006 Export Data to Customer Subscreen for Purchasing Document Header (PBO)
EXIT_SAPMM06E_007 Export Data to Customer Subscreen for Purchasing Document Header (PAI)
EXIT_SAPMM06E_008 Import Data from Customer Subscreen for Purchasing Document Header
EXIT_SAPMM06E_009 Reset Customer Data at Beginning of New Document (Without Dialog)
EXIT_SAPMM06E_010 Export of Service RFQ Data
EXIT_SAPMM06E_011 Import Service Prices for Quotation
EXIT_SAPMM06E_012 Check Customer-Specific Data Before Saving
EXIT_SAPMM06E_013 Update Customer-Specific Data in Purchasing Document
EXIT_SAPMM06E_014 Read Customer-Specific Data when Importing Purchasing Document
EXIT_SAPMM06E_016 Export Data to Customer Subscreen for Purchasing Document Item (PBO)
EXIT_SAPMM06E_017 Export Data to Customer Subscreen for Purchasing Document Item (PAI)
EXIT_SAPMM06E_018 Import Data from Customer Subscreen for Purchasing Document Item
EXIT_SAPMM06E_020 User Exit: Change Document for Requisitions (Conversion into PO)
EXIT_SAPMM06E_021 Fulfillment of Target Value: Release Orders Against a Contract
EXIT_SAPMM06E_022 Relevant Texts for "Texts Exist" Indicator
EXIT_SAPMM06E_023 Definition of Relevant Texts for "Texts Exist" Indicator
EXIT_SAPMM06E_024 Customer Enhancement: Activate PReq Block
user exit for sto
Regards.

User exit for delivery creation in VL10B/VL10G-

Hi,
Is there any exits available for restricting the document type while the deliveries are selected/processed using VL10B/VL10G - delivery creation in background.
Scenario is when deliveries are created for STO's,the delivery is to be created for a selected document types(EKKO - BSART).Other types of document types have to be ignored when the delivery is created in background.
Regards
Deepak

Hello Deepak
You handle this through configuration while setting up Stock Transport Orders in MM.
Path: IMG/Materials Management/Purchasing/Purchase Order/Set up Stock Transport Order/Assign Delivery Type and Checking Rule
Here you a Delivery type for a combination of Plant and PO type. So those PO types which you don't want to be included for delivery creation will not figure in this assignment. I don't think you should go down the user exit route.
If you still need to explore user exits, look at OSS note 198137 for a list and purpose of VL10X based exits.
Hope this helps.

User exits for delivery note vl02

i want to add some field in delivery note at item level susch as no of package per item for this which user exits i use

Hi,
to find the user exits & Badi's for the T-code..
go to table TSTC>enter T-code and execute> get the Program for the t-code..
and go to-se38-->get the package attached to the t-code..
next go to t-code Se15>expand the enhacement tab>enter package under userexit and
                                                     execute you will get the list of exits
                                                     available...
                                                  -->enter package under Badi's tab and
                                                     execute you will get the list of Badi's
                                                     available...
All the User exits are stored in Table MODSAP..
Prabhudas

User Exit for Delivery to add Profit Centre

Hello All,
I need the User Exit to Add the Profit Centre at Delivery level..!
I tried in this MV50AFZ1 Form FORM userexit_move_field_to_lips.
but its not working...
So please let me know the userexit and the code..!
Thanks in Advance
Regards
Babu

Hi Prabhu..
We need to maintain the profit center derivation rule in the delivery or billing document, i.e. if batch no starts as A- Profit center-1000, B -Profit center-2000. We have used some user exit in order and working fine. where as our client is interested to have same in delivery or billing document. The profit center should be determined as per batch no starts and not as maintained in the material master.
now I did it in Delivery its working fine only in Delivery but its not carrying to Billing
so please help me out which carries for entire cycle
my code is like this
Include MV50AFZ1
FORM userexit_save_document_prepare.
LOOP AT xlips.
IF xlips-charg+0(1) EQ 'D'.
xlips-prctr = '0000001000'.
ELSEIF xlips-charg+0(1) EQ 'E'.
xlips-prctr = '0000001200'.
ELSEIF xlips-charg+0(1) EQ 'R'.
xlips-prctr = '0000001300'.
ELSEIF xlips-charg+0(1) EQ 'M'
OR xlips-charg+0(1) EQ 'P'
OR xlips-charg+0(1) EQ 'N'
OR xlips-charg+0(1) EQ 'U'
OR xlips-charg+0(1) EQ 'H'
OR xlips-charg+0(1) EQ 'L'
OR xlips-charg+0(1) EQ 'S'
OR xlips-charg+0(1) EQ 'O'
OR xlips-charg+0(1) EQ 'Y'
OR xlips-charg+0(1) EQ 'B'
OR xlips-charg+0(1) EQ 'A'
OR xlips-charg+0(1) EQ 'I'.
xlips-prctr = '0000009001'.
ENDIF.
XLIPS-UPDKZ = 'U' .
MODIFY xlips.
CLEAR xlips.
ENDLOOP.
ENDFORM. "USEREXIT_SAVE_DOCUMENT_PREPARE
Thanks
Regards
Babu Aeda

Re: User Exit for Delivery

Hi all,
I have an interface program that integrates with external program that via RFC it will create Delivery document by calling standard SAP tcode "VL01N" through function module and when Delivery number is successfully created, it will update the information from the Delivery document to a Z-table accordingly.
This Z-table also collectively update information passed from the external progam to SAP.
Which then, the Z-table is used by a customised report to retrieve information and tabulate in ALV.
Kindly advise if assuming a Delivery document is reversed or deleted via standard tcode (i.e. VL02N or VL09), is there any exit I can apply to update the deletion or reversal of this document to the customised table??
Kindly advise.
Thanks.

Dear PKW,
This is possible to achieve through a User Exit, where the ABAPer writes a code which will update the z table when ever data is edited for a delivery document. Presently i am not aware of any User Exit numbers, which an ABAPer or another Guru form this forum can suggest.
Happy SAPing
Venkat - Hyd

User exit for Delivery note in MIGO transaction

hi friends,
Basically i am MM Functional ,so please guide me how worte user exit in SAP system . if any body face this same issue pls put progrmme and where it placed
In case we enter the duplicate delivery note from the same vendor in the same physical/financial year, should get error/warning message
In MIGO delivery note not accpeted repeted DC numbers
Use MBCF0002 Customer function exit: Segment text in material doc. item
EXIT_SAPMM07M_001 to give ur coding for duplicate delivery note entry and chk.
Field name i_mkpf-xblnr for delivery note number

>
sivasankar cherukuri wrote:
> hi friends,
>
> Basically i am MM Functional ,so please guide me how worte user exit in SAP system . if any body face this same issue pls put progrmme and where it placed
>
> In case we enter the duplicate delivery note from the same vendor in the same physical/financial year, should get error/warning message
>
> In MIGO delivery note not accpeted repeted DC numbers
>
> Use MBCF0002 Customer function exit: Segment text in material doc. item
>
> EXIT_SAPMM07M_001 to give ur coding for duplicate delivery note entry and chk.
>
> Field name i_mkpf-xblnr for delivery note number
Go to TCode CMOD and select an existing project / create a new project.
Select enhancement assignment and give the name EXIT_SAPMM07M_001
Save the change.
Then enter again and double click on the name provided above. Inside there will be an INCLUDE ZX*****
Double click on that include, the system will ask to create a program. Accept it.
Now you have the open field to make your validation.
Regards,
Aroop

USER-EXIT for DELIVERY--very very urgent

Similar Messages

Maybe you are looking for