User exit to activate few controls after the order goes to credit hold

Hi, we would like to turn on the fixed qty flag at the line item level and an header delivery block if an order goes on credit hold.
We are looking out for the user exit which might can be used for this purpose (which can be executed after the credit check was done and before the order is saved either manually or automatically).
Mothish babu

but we want a credit check for certain customers only
Activate credit check for the sales order. If you want to have credit check only for certain customers, maintain relevant credit limit records only for those customers in t.code FD32. If this does not solve the purpose, then you can make use of the field No credit check in t.code OVA8. Develop a routine to check for only certain customers in t,code VOFM ->Requirements->Credit check and assign this routine in OVA8.
Regards,

Similar Messages

  • BADI USER/EXIT for inserting cust. data after the Pruch. Requsitio is SAVED

    Hi all,
    Is there any  BADI or USER EXIT available for the transaction ME51N to save
    some customer data fields in a separta Z table , after the data is saved from the
    Purcahse requistion .
    I  have used the customer exit MEREQ001 for additing the customer filelds with TABLE CONTROL.
    I am not able to save the data from the table control . Any suggestion on this will be apprecitated  .
    Best Regards

    Hi,
      You have  to use 'EXIT_SAPLMEREQ_003' to import data from screen to your tables and use 'EXIT_SAPLMEREQ_001' to send data to screen.use the below code like below:
    EXIT_SAPLMEREQ_001:
    tables : ci_ebandb.
    data : i_mereq_item type mereq_item.
    if im_req_item is initial.
    clear: ci_ebandb.
    else.
    i_mereq_item = im_req_item->get_data( ).
    move-corresponding i_mereq_item to ci_ebandb.
    endif.
    EXIT_SAPLMEREQ_003
    data : i_mereq_item type mereq_item.
    if not im_req_item is initial.
    i_mereq_item = im_req_item->get_data( ).
    move-corresponding ci_ebandb to i_mereq_item .
    call method im_req_item->set_data( i_mereq_item ).
    endif.
    Also set the flag EX_CHANGED = 'X' to transafer the changes to database
    Regards,
    Himanshu

  • User Exit for Enter / post invoice against the order without goods receipt

    Hi,
    My requirement is to enter or  post the  invoice against the Purchase order without goods receipt.
    Need to an User Exit  for this.
    Thanks in Advance!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

    User exits available are:
    V02V0001 Sales area determination for stock transport order
    V02V0002 User exit for storage location determination
    V02V0003 User exit for gate + matl staging area determination (headr)
    V02V0004 User Exit for Staging Area Determination (Item)
    V50PSTAT Delivery: Item Status Calculation
    V50Q0001 Delivery Monitor: User Exits for Filling Display Fields
    V50R0001 Collective processing for delivery creation
    V50R0002 Collective processing for delivery creation
    V50R0004 Calculation of Stock for POs for Shipping Due Date List
    V50S0001 User Exits for Delivery Processing
    V53C0001 Rough workload calculation in time per item
    V53C0002 W&S: RWE enhancement - shipping material type/time slot
    V53W0001 User exits for creating picking waves
    VMDE0001 Shipping Interface: Error Handling - Inbound IDoc
    VMDE0002 Shipping Interface: Message PICKSD (Picking, Outbound)
    VMDE0003 Shipping Interface: Message SDPICK (Picking, Inbound)
    VMDE0004 Shipping Interface: Message SDPACK (Packing, Inbound)
    user exit when PGI is done
    Reward if useful.

  • User Exit for ME21 PO Creation at the time of saving--Urgent

    Hi,
    Can some one help me out in finding the user exit for PO creation at the time of saving.
    The Requirement is:
    I need to create a custom field in EKKO table.
    After appending the structure with the field to the EKKO table, i need to create a PO.
    Now i need to update the field which has been created at the time of pressing the SAVE button.
    I need to update the EKKO table it self.
    I could find the user exits but none of them have the EKKO table either in Changing or in Tables.
    Thanks,

    Hi,
              You may want to check this user exits.
    EXIT_SAPMM06E_012 - Check Customer-Specific Data Before Saving
    EXIT_SAPMM06E_013 - Update Customer-Specific Data in Purchasing Document
    Here is the list of available user exits for ME21.
    EXIT_SAPMM06E_001 - Other Number Range or Own Document Number
    EXIT_SAPMM06E_004 - User Exit for Cust.-Specific Control of Import Data Screens in Purchasing
    EXIT_SAPMM06E_005 - Field Selection Control: Vendor Address Screen
    EXIT_SAPMM06E_006 - Export Data to Customer Subscreen for Purchasing Document Header (PBO)
    EXIT_SAPMM06E_007 - Export Data to Customer Subscreen for Purchasing Document Header (PAI)
    EXIT_SAPMM06E_008 - Import Data from Customer Subscreen for Purchasing Document Header
    EXIT_SAPMM06E_009 - Reset Customer Data at Beginning of New Document (Without Dialog)
    EXIT_SAPMM06E_012 - Check Customer-Specific Data Before Saving
    EXIT_SAPMM06E_013 - Update Customer-Specific Data in Purchasing Document
    EXIT_SAPMM06E_014 - Read Customer-Specific Data when Importing Purchasing Document
    EXIT_SAPMM06E_016 - Export Data to Customer Subscreen for Purchasing Document Item (PBO)
    EXIT_SAPMM06E_017 - Export Data to Customer Subscreen for Purchasing Document Item (PAI)
    EXIT_SAPMM06E_018 - Import Data from Customer Subscreen for Purchasing Document Item
    EXIT_SAPMM06E_020 - User Exit: Change Document for Requisitions (Conversion into PO)
    EXIT_SAPMM06E_021 - Fulfillment of Target Value: Release Orders Against a Contract
    <b>Reward points</b>
    Regards

  • User Exit or BADI to control GUI/Toolbar of TP04

    Hi All,
    I need to know any user exit or BADI enhancement for changing the toolbar of TP04. As of now, if we open TP04, we get two pushbuttons (Overview and Approve). We have a requirement like, only Overview should be displayed. Users should not Approve it and hence we need to take that pushbutton off. Kindly suggest me if anybody is aware of any exit or BADI enhancement to control GUI or Toolbar of TP04.
    Thanks a lot!!

    Thanks for the reply. However, we have a scenario because of which we are going for this disabling of the button. We have workflow for the travel management . The t-code TP04 will be given to SAP portal directly. And in workflow we have made Approval available for Save button, because of the event being triggered. So we do not again want this Approve button explicitly. And hence are thinking of disabling it. Is there any way to get this?
    Thanks a lot!!

  • User Exit for PKMC (Kanban Control Cycle)

    Dear Gurus,
    I need to know if there is a user exit in PKMC (kanban control Cycle) to create a extra tab next to the print control tab in the bottom.
    Best Regards,
    Kumar

    List of exits available.
    Enhancement/ Business Add-in            Description
    Enhancement
    MPKR0001                                Customer fields in kanban control cycle
    MPKP0002                                Customer-Specific Fields Call Interface
    MPKP0001                                Customer Defined Display in Kanban Board
    MPKD0001                                Kanban output as EDI
    MPKCCY02                                Customer Error in SumJC Control Cycle
    MPKCCY01                                User-Defined Fields in Kanban Control Cycle (PKMC)
    MPKC0001                                User exit for kanban calculation
    MPKB0002                                Customer defined display in kanban board
    MPKB0001                                User's own functions in the Kanban processing
    Business Add-in
    BADI_PVBE_UPDATE_APO      PVB Publish Changes to the APO
    MPKC_REQ_SELECTION           BAdI for Requirements Selection for Kanban Calculation
    PK_CALL_INTERFACE              Customer-Specific Fields Call Interface
    PK_CCY_SELECTION               Selection for Maintaining Control Cycles
    PK_REVERSAL                          BAdI during reversal of Kanban

  • What are the user-exits which will trigger on saving Sales Order

    Hello Experts!!!
    I am working on Sales Order VA01. The requirement is I need to pre populate Sold-to-Party field. I find out user-exit (V45A0002  Predefine sold-to party in sales document  ). So it is working fine.
    Now second requirement is I need to capture all the date once user saves Sales Order. Also the time or Sales Order creation I have to make u2018GRAYu2019 some of the fields so user cannot change the value. Can anybody tell me which user-exits should I use to retrieve the entire information user entered and lock fields in Sales Order screen?
    Thanks a lot on advance.

    Hi
    U can't find it there,because it's a include, not enanchement.
    So u need to use the trx SE38, not CMOD.
    For sales ored there aren't the enanchements, but only some FORMs defined in particular includes.
    U need to get the access key by OSS in order to change them.
    These are the rest of the includes where u can find other exits:
           INCLUDE MV45ATZZ.            " Data definitions in MV45ATOP
             INCLUDE MV45AOZZ.             " User-modules PBO
             INCLUDE MV45AIZZ.             " User-modules PAI
             INCLUDE MV45AFZA.             " User-forms < 3.0
             INCLUDE MV45AFZB.             " User-forms
             INCLUDE MV45AFZC.             " User-forms < 3.0D
             INCLUDE MV45AFZD.             " User-forms   3.0E
             INCLUDE MV45AFZF.             " User-forms   3.0F
           include mv45afzg.             " User-forms   3.1G
             INCLUDE MV45AFZH.             " User-forms   4.6B
             INCLUDE MV45AFZZ.             " User-forms
             INCLUDE MV45AFZ4.             " User-forms   4.0
    Anyway u can find some information about these exit in customizing (trx SPRO):
    Sales and Distributions->System modifications->User exits
    Max

  • Premiere Pro & After Effects close after a few seconds after the startup?

    Hi,
    I bought Creative Cloud yesterday and everything installed just fine. I haven't tried all Apps yet, but so far Premiere Pro and After Effects close after a few seconds after the startup. There is no dialogue or error window of any kind, the programs just shut down automatically.
    The weird thing is that I had the trial before, but also uninstalled it, but then the apps worked just fine.
    I searched the forum but couldn't find anyone with the exact same issue. I hope someone can help me out.
    My notebook specs:
    Windows 7 Home Premium 64-bit
    Intel Core i7-3610QM
    CPU 2.30 GHz
    RAM 6 GB
    Graphics card: nVidia Geforce GT 630M - 2 GB

    >assigning my nVidia card as the main driver for Premiere Pro (instead of the standard card)
    You MAY need to turn off the onboard graphics "chip" in BIOS
    -http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
    -http://forums.adobe.com/thread/1001579
    -Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
    -link to why http://forums.adobe.com/message/4685328
    -http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2

  • User exit or a badi for checking the vendor email id in me22n on me29n

    hi all,
    can anybody suggest me a user exit or a badi  for checking the email id of the vendor in me21n or me22n or me29n.
    i.e. a user exit or a BADI which gets hit either at the time of creation or release of a purchase order.
    plz suggest me a solution its urgent.
    regards,
    santosh

    Hi Santosh,
    Have you looked BADI <b>ME_PROCESS_PO_CUST</b> or user exits <b>EXIT_SAPMM06E_016</b> / <b>EXIT_SAPMM06E_017</b>?
    Hope this will help.
    Regards,
    Ferry Lianto
    Please reward points if helpful.

  • User exit or other enhancements to change the status of the kanban.

    The requested to trigger the movement when the kanban status changed from empty to full.
    if itu2019s possible to use user exit or other enhancements to change the status of the kanban.
    can you please guide me iam new for enhancements.

    I think you're seeing standard SAP behavior.  However, a discussion with your SD/LE functional team member might be beneficial. Personally, I don't think SAP supplies a way to "add back" to that quote.  However, you might develop something that changes the quantity on the quote (essentially adds to the original quantity), based on the fact that a SO line got rejected.

  • User Exit EXIT_SAPLV60B_002 not accurate 100% of the time

    Hi.
    we use the above user exit to bring the delivery # to the customer & gl lines of an accounting document. this works 100% of the time for the gl line (user exit EXIT_SAPLV60B_004), but not 100% of the time for the customer line (user exit EXIT_SAPLV60B_002). 
    below is the include & code we have.  does anyone have suggestion as to how the customer line can be accurate 100% of the time?
    INCLUDE:  ZXVVFU02
    CODE:  Read table CVBRP index 1. XACCIT-XREF1 = CVBRP-VGBEL.
    thx

    You requirement is to check the constrain based on scheduling . THere  is not user exist I believe that may exaclty address your requirement.  THan also check below two user exit.
    CNEX0028  Check activity release
    CNEX0029  Check network release
    Ideally yhou should chekc for hte some BAPI for hte network save will help you .
    Regards
    Nitin P.

  • Is there any problem for my iphone's battery to keep my charger connecting for few hours after the battery is full?

    s there any problem for my iphone's battery to keep my charger connecting for few hours after the battery is full?
    Sometimes i sleep and the my iphone is charging and of course the battery became full after two or three hours, and definitely i will not wake up in the midnight to just disconnect the charger, please i need your help.

    This is considered normal use. I think everybody does this, including myself. It's not something to worry about in the least bit.
    Just remember to complete a full charge cycle (allow the phone's battery to discharge to 10%-20%, then charge uninterruped to 100%) once a month and you'll be fine.
    http://www.apple.com/batteries/iphone.html

  • User exits which can be called from the bapi BAPI_ALM_ORDER_MAINTAIN

    Hi Experts,
    I was trying to change work orders using the BAPI_ALM_ORDER_MAINTAIN, but this does not allow me to update the order address, one way of updating the address is using recording, but i was looking for a way  in which we can use some user exit which will be called from the BAPI so that i can update the address number in the final structure before the work order is saved (without having to go for recording)?

    Hi,
    you have restrictions to this .
    Refurbishment orders are not supported.
    The estimated costs cannot be processed - only the estimated overall costs of the order.
    Notification data cannot be processed with the order BAPI, even if the settings in Customizing are such that the orders and notifications can be maintained on one screen. However, the system will create a notification with the order if this is specified in the Customizing settings.
    Permits cannot be processed.
    The order addresses cannot be processed.
    Individual partner addresses cannot be maintained.
    Regards

  • What is the user exit to change segment version at the run time of an IDOC

    Dear Experts
    Please can some one help on this ...
    Which is the user exit to change segment version at the run time of an outbound IDOC.
    For example
    Suppose we have a IDOC segment with two version 620 and 46C.
    By default the IDOC pick the 620. But Our requirement is to use 46C.
    What user exit we can use for outbound IDOC to change the version used at run time for a segment.
    Appreciate your response.
    Thanks

    Hi,
    ALE00001      EXIT_SAPLBD11_001         
    User exit for the IDOC version changer
    Regards,
    Ravi

  • USER EXIT FOR CHANGING POSTING DATE IN THE MATERIAL DOCUMENT

    Hi,
    Pls advise any USER EXIT FOR CHANGING POSTING DATE IN THE MATERIAL DOCUMENT.
    Regards,

    Hi,
    There is another user exit for updating material document data Upon posting  is MB_CF001
    I hope this will fullfill you.
    Prem

Maybe you are looking for

  • ICloud storage and camera roll

    I have received a notification saying my iCloud is almost full, it shows my camera roll at 4.6GB so I went through and deleted around half of my photos and videos (I had around 1350 and now have 652) yet it still shows camera roll at 4.6GB, anyone kn

  • HT4009 When ever I attempted to purchase an in app purchase a small message appears and says please contact iTunes sopport ( please help!)

    This does not allow me to buy any purchases on the iPad

  • Rounding at Item Level

    Hi SD expert, <b>1st Issue: Price different in Billing compare to manual calculation</b> Scenario: Billing items quantity based on batch item quantity which client complaint manual calculation is different in billing. For example: <u>Price Manual cal

  • Disabled button still clickable.  Why ?

    Hi, When I disable a button : oForm.Items.Item("MyButton").Enabled = false it's still possible to click it.  Why is that ?  What is the purpose of the Enabled ?  If you tell me it's just to make it appear disabled but it's not really disabling it the

  • System Setup (OS, Drives)

    Hello all, and thanks in advance for your time. I am trying to prepare for Leopards arrival the best way I can and I need some input. I have (bare with me) : System- G5 Dual 2Ghz, 3GB RAM (not really pertaining to this but thought it may impact somet