User Exit to assign Reference Number xblnr in FB70

HI Experts,
i need to assign the reference number XBLNR in transaction FB70.
Anybody knows wich user exit should i use?
thank's in advance,
Fernando S.

Hi,
thank you but i will need an exit in order to determine in wich case to assign that reference.
i also apologize because the transaction code is FV70.
I'll start a new thread in order to correct the question,
thank's
Fernando S.

Similar Messages

Program/User exit to maintain the number ranges at plant level

Hi Everybody,
Could u please tell me program/user exit to maintain the number ranges at plant level.
Thanks & Regards,
Piyush

Hi
Do you want to maintain all the number range Objects
For Material Master you can use the enhancement MGA00002
For PO Nu,ber ranges you can use the enhancement MM06E003
Thanks & Regards
Kishore

User-exit wich modify batch number in vl31n

Hi,
I have another question.
What is user-exit wich modify batch number in vl31n transaction ?
Regards,
Greg.

Hi
Find the available exits with the following program:::
*& Report ZFINDUSEREXIT
report zfinduserexit.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
select single * from tadir where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir where pname = tstc-pgmna.
select single * from enlfdir where funcname =
tfdir-funcname.
select single * from tadir where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name eq enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
select * from tadir into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct where sprsl eq sy-langu and
tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
execute this code.
type the transaction. u will get the user exits
If there are no available user exits you could go for badi's.
To search for a badi, go to se 24 display class cl_exithandler. double click on method get_instance, get a break point on case statement. execute and start the required transaction in new session. look for variable exit_name. It would show the available badi's.
regards
ravish
plz dont forget to reward points if helpful

ME21N -- User Exit to assign G/L Account number

Hi All,
The requirement is to assign G/L account number (EKKN-SAKTO) based on vendor account group, material type and account assignment category. I have tried with some user exits and unfortunately i was not succeeded in finding out the correct one.
I request you to provide me the user exit/enhancement name or BADI name that I can use to assign the G/L account number.
Thanks & Best Regards,
Kumar.

Create the field exit on field SAKTO.
and write the below code in the field exit.
DATA: i_dynpread TYPE STANDARD TABLE OF dynpread WITH HEADER LINE.
DATA: V_SAKTO TYPE EKKN-SAKTO.
i_dynpread-FIELDNAME = '<Screen field name for Account assignment category>'.
append i_dynpread.
clear: i_dynpread.
i_dynpread-FIELDNAME = '<Screen field name for Material Type>'.
append i_dynpread.
clear: i_dynpread.
i_dynpread-FIELDNAME = '<Screen field name for Vendor Account Group>'.
append i_dynpread.
clear: i_dynpread.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
DYNAME = '<Screen name>'
DYNUMB = '<Number>'
TABLES
DYNPFIELDS = i_dynpread.
IF SY-SUBRC = 0.
loop at i_dynpread.
<Write the select statement logic to retrieve EKKN-SAKTO based on the other field values which will be available in the internal table I_DYNPREAD and put the value into the variable V_SAKTO.>
IF SY-SUBRC = 0.
output = V_SAKTO.
ENDIF.
endloop.
ENDIF.
Hope it helps.
Reward if it is useful.
Thanks,
Srinivas

User Exit for assignment number check

Hi SAP GURUS,
I want to have a cheque in system for not to enter a cheque number twice in assignement field. Which user exit i can use for the cheque payment made thru F-53 OR F-58 OR F110.
Thanks
CHEERS
Edited by: NITIN on Apr 26, 2010 7:50 AM
Edited by: NITIN on Apr 26, 2010 11:18 AM

Identification of user EXIT
1.     Enter T.code for which you want to maintain User exit. For ex : ME51 (Purchase requisition)
Path: Status Status Double Clicks on the program NameGo toAttributesNote down development class.
For Ex : ME51u2014development class/package name is ME
2.     Enter T.code : SMODutilities FindEnter Development class/package name Execute
3.     It shows all the Exit names. Click on Exit Name and click on Functional module name.
for ex: f-53 having following exits.
F050S001 FIDCMT, FIDCC1, FIDCC2: Edit user-defined IDoc segment
F050S002 FIDCC1: Change IDoc/do not send
F050S003 FIDCC2: Change IDoc/do not send
F050S004 FIDCMT, FIDCC1, FIDCC2: Change outbound IDoc/do not send
F050S005 FIDCMT, FIDCC1, FIDCC2 Inbound IDoc: Change FI document
F050S006 FI Outgoing IDoc: Reset Clearing in FI Document
F050S007 FIDCCH Outbound: Influence on IDoc for Document Change
F180A001 Balance Sheet Adjustment
FARC0002 Additional Checks for Archiving MM Vendor Master Data
FEDI0001 Function Exits for EDI in FI
RFAVIS01 Customer Exit for Changing Payment Advice Segment Text
RFEPOS00 Line item display: Checking of selection conditions
RFKORIEX Automatic correspondence
SAPLF051 Workflow for FI (pre-capture, release for payment)
Thanks
ANJI

User-Exit to change ECR number before Save

Hi all,
I have a requirement to assign an ECR number (if it is left blank) whenever we create the ECR.
So the scenario is we go to TCode CC01 / CC31 and enter without giving the Change Number.
Now after entering all the mandatory fields, when we save, based on some conditions, i have to generate a Change number.
I have check some user-exits / BADIs which are triggered on Save. But none of them provides an option to Change the Change Number. meaning all the user-exits / BADIs have AENNR as IMPORT parameter.
Could any one please tell whether there is any user-exits or BADI that will solve my requirement.
Many thanks in advance,
Anoop R.S
Edited by: R.S.Anoop on Dec 8, 2009 4:29 PM

Hello Anoop,
Could you please let me know if you where able to resolve this issue? If yes, how?
I have a similar requirement and still working on solution for this.
Thanks in advance.
Regards,
Senthil G.

RF Queues User Exit to assign to different queues

Hello SAP Gurus,
I have doubts about the existence of a user exit that can carry out to just the allocation of the TO's with the same WM movement type but with a different type of material.
Example:
Materials: 2 Materials - Cans and bottles.
Type of movement: 101
Main Queue:
- Unpack
Secondary Queues (into main):
- Unpacking Bottle.
- Unpacking Cans.
What I want to know is whether there is a standard user exit that do this segregation of materials depending on the type and assign it to respective queue?
Thanks and Regards,

Hello Jesus,
You must be knowing that TO's created are assigned to various queues on the basis of following types.
1.Putway
2.Picking
3.Posting change
4.Warehouse supervision
I do not have SAP access right now , but I believe we can create number of queues and then assign the TO's manually on the basis of material to different queues through LRF1
The point of using user exit for splitting TO's to differnent queues with respect to material is doubtful.
Regards,
Prashant

MIGO user exit to get serial number

Hi Experrts:-
I need to change the status of serial number (equipment number ) during Migo (good receipt,Transfer posting).
I have checked all the user exits and number of badis but i am not getting serial number at run time if i get serial numbar
in exit od badi i will change the status
I have used following badi:-
MB_DOCUMENT_BADI
MB_MIGO_ITEM_BAdI
Thanks

Hi ,
m also using GET_SERNOS_OF_DOCUMENT
but not getting serial number.
need to get serial number in MIGO.
how to pass parameters to this fm.
KEYDATA-TASER = 'SER03' "Goods mvmnt
KEYDATA-SDAUFNR = ??
KEYDATA-POSNR   =   ??
CALL FUNCTION 'GET_SERNOS_OF_DOCUMENT'
   EXPORTING
     KEY_DATA                  =
TABLES
   SERNOS                    =
EXCEPTIONS
   KEY_PARAMETER_ERROR       = 1
   NO_SUPPORTED_ACCESS       = 2
   NO_DATA_FOUND             = 3
   OTHERS                    = 4
please guide..

User Exit for Purchase Requisition Number Range

Dear Experts,
I searched on sdn, i got M06B0003 &M06B0004 this 2 user exit for PR Number range.
I have activated both User exits but while creating PR is not getting effect of that user exit.
I have checked by putting Break-point in respective user exit but while saving the PR it should go to that break-point but it not going there aslo.
And also i have checked user exit MM06E003 but it is for Purchase Order number range.And for PO it is working.
Please help me to solve this issue.Solution will be appreciated.
Regards,
Sanket.

Hi,
Sorry that badi will not help try this one ...EXIT_SAPLMEREQ_009 in MEREQ001 where the export parameters is purchase requisition number....
Thanks,
Shailaja Ainala.

PO User Exit which pass PR Number

Dear All
Is there any PO user exit which can pass the PR number while creating a PO by adopting a PR number.
Requirement is to check PR amount before saving the newly created PO. If possible also specify the PR field in user exit.
Thanks

Hi,
Try User Exit MM06E005,Implemente EXIT_SAPMM06E_012
PR number is passed in field TEKPO-BANFN.
Regards
Pole

MIGO: user exit for checking batch number

Hello,
When using MIGO to do goods receipt (101 mvt) I need a user exit in each time a line is added to check the batch number entry. If the batch number is empty for certain materials issue a error message to the user.
Thanks,
Peter

where is your problem then?
If you create batches automatically with 101 ,then each line will get its batch from SAP, no need to check if there something entered manually.
Why do you customize auto creation of batches, while you want the user to enter the batches manually?
can you give a bit more background?

User-exit to copy collective number from sales order to purchase order

Hi,
Can any one help me which user-exit/BADI is used to copy collective number from sales order to purchase order? please help me.
Thanks,
Alka

hi
copy control would be the better option to choose.. but still u can a give a search in list below and opt for the right one..Refer to the link below..
http://www.planetsap.com/Userexit_List.htm
User exits for Sales order
1USEREXIT_DELETE_DOCUMENT
2USEREXIT_FIELD_MODIFICATION
3.USEREXIT_MOVE_FIELD_TO_VBAK
4.USEREXIT_NUMBER_RANGE
5.USEREXIT_SAVE_DOCUMENT
User exits for billing
1.USEREXIT_ACCOUNT_PREP_KOMKCV (Module pool SAPLV60A, program RV60AFZZ)
2.USEREXIT_ACCOUNT_PREP_KOMPCV
3USEREXIT_NUMBER_RANGE_INV_DATE (Module pool SAPLV60A, program RV60AFZC)
4USEREXIT_PRINT_ITEM (Module pool SAPLV61A, program RV61AFZB
5.USEREXIT_PRINT_HEAD (Modulpool SAPLV61A, Programm RV61AFZB)
Reward if Useful
Thanx & Regards..
Naren..

User-exit: Put internal order number to GL item when settlement

Hi Experts,
I have a requirement to develop user-exit for internal order settlement. The current status in in standard SAP function as below:
When we settle an internal order then corresponding FI documents is generated at the same time. In the FI document there have two itmes, the first item is for GL account, and the field of bseg-aufnr is space. The second item is for ERG account, and the internal order number will fill into bsge-aufnr on this item.
Now our requirement is below,
I would like to fill the internal order number to first item also. Do we have the user-exit/enhancement/modifucation to meet this requirement?? Please kindly point me a direction. Thanks very much.

Only one exit for it check
Transaction Code - KO88 Actual Settlement: Order
Exit Name Description
COOM0003 Customer function for automatic creation of settlement rules
No of Exits: 1
Rewards if useful.....................
Minal

User Exit to Populate Document number and latest Version in ME21N

Hi,
I am looking to populate :
Document Type (DRAW-DOKAR)
Document Number (DRAW-DOKNR)
while creating Purchase order (ME21N).
I know the tables DRAD and DRAW can be used to get Document Info by populating EKPO-MATNR as Object key.
But is there a user exit to populate it at the time of PO creation.
Found a BADI Document_Number01 but that does not take EKPO-MATNR as input parameter.
Any inputs are really appreciated.

hi,
check these exits.
MM06E003                                Number range and document number
M06B0004                                Number range and document number
M06B0003                                Number range and document number
also check these badi's.
ME_PROCESS_PO_CUST                      Enhancements for Processing Enjoy Purchase Order: Customer
ME_PURCHDOC_POSTED                      Purchasing Document Posted

User exit FOR assign predefined vendor no

hi i am new to USER EXITS.
i understood the concetp of user exit. there is some list of user exit available in SMOD.
i have requirment of pre-assigning my vendor no whenever i am creation po USING me21n.
tell me the step by step way to find out the user exits for the same requirement.
regards
Giri

Hi,
U want the user exits while creating ME21.
Do one thing.
Goto transaction ME21.
Then go to system-->status.Then take take standarad program for the me21n.I think 'SAPLMEGUI'.
Open this program in SE38 and go to attrubutes.Take the package of this program.Package is 'ME'.
Go to SMOD.Press F4.Click on iforamtion systems button.Give u r package 'ME' there.
Press enter.U will get all the enhancements. there.For Adding enhancement we have the enhancement
'MM06E005'.
Now go to CMOD and create the project and Assign this Enhancemt in Enhancement assigments.Then u wil get the exits which u have to implement.
I hope this may help you.
Thanks,

User Exit to assign Reference Number xblnr in FB70

Similar Messages

Maybe you are looking for